(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
•Material: Cast Iron
•Strength: Standard (Cast Products)
Part Number
Configured Part Number is shown.
BIKD150-75
Type | Hole Machining | [ M ]Material | [ S ]Surface Treatment |
IK | FB (Without Hole) D (Through Holes) DM (Through Hole Diameter Selectable Type) K (Through Holes and Dowel Holes) KM (Through Hole and Dowel Hole Diameter Selectable Type) | Cast Iron Class No.35 | Primer Coating (Gray) |
BIK | Black Oxide | ||
MIK | Electroless Nickel Plating |
Part Number | - | A | - | N | - | D |
IKFB350 IKDM100 BIKKM200 | - - - | 150 100 120 | - - | N10 N12 | - | D8 |
Part Number | A | Angle Plate Body | |||
Type | H | W | T | T1 | |
Without Hole IKFB BIKFB MIKFB | 60 | 40 | 30 | 8 | 6 |
100 | 40 | 30 | 8 | 6 | |
50S | 50 | 15 | 8 | ||
50 | 100 | 14 | |||
100 | |||||
150 | 50 | 50 | 15 | 8 | |
70 | 100 | 14 | |||
75 | 75 | ||||
100 | 100 | ||||
200 | 75 | 75 | 15 | 14 | |
120 | 100 | ||||
250 | 120 | 100 | 18 | 15 | |
300 | 150 | ||||
350 | 150 | ||||
400 | 150 |
Part Number | A | Angle Plate Body | Through Hole | |||||||||
Type | H | W | T | T1 | N | N | B | X | F | Y | G | |
Through Holes (Through Hole Diameter Fixed) IKD BIKD MIKD (Through Hole Diameter Selectable) *2 IKDM MIKDM | 60 | 40 | 30 | 8 | 6 | 3.5 | - | 20 | 15 | 15 | 30 | 20 |
100 | 40 | 30 | 8 | 6 | 3.5 | - | 20 | 15 | 15 | 55 | 30 | |
50S | 50 | 15 | 8 | 9 | 10 12 14 | 30 | 35 | - | ||||
50 | 100 | 14 | 11 | 70 | 45 | 40 | ||||||
100 | 45 | 40 | ||||||||||
150 | 50 | 50 | 15 | 8 | 9 | 30 | 35 | - | 75 | 60 | ||
70 | 100 | 14 | 11 | 70 | 40 | |||||||
75 | 75 | 50 | ||||||||||
100 | 100 | 70 | 45 | 40 | ||||||||
200 | 75 | 75 | 15 | 14 | 11 | 50 | 40 | - | 110 | 70 | ||
120 | 100 | 70 | 50 | 50 | ||||||||
250 | 120 | 100 | 18 | 15 | 11 | 70 | 50 | 50 | 140 | 90 | ||
300 | 150 | 40 | 90 | 190 | ||||||||
350 | 150 | 230 | 100 | |||||||||
400 | 150 | 260 | 120 |
Part Number | A | Angle Plate Body | Through Hole | Dowel Hole | ||||||||||||
Type | H | W | T | T1 | N | N | B | X | F | Y | G | DH7 | DH7 | a | h | |
Through Holes and Dowel Holes (Through Hole and Dowel Hole Diameter Fixed) IKK BIKK MIKK (Through Hole and Dowel Hole Diameter Selectable) *3 IKKM BIKKM | 60 | 40 | 30 | 8 | 6 | 3.5 | - | 20 | 15 | 15 | 30 | 20 | 3 | - | - | 40 |
100 | 40 | 30 | 8 | 6 | 3.5 | - | 20 | 15 | 15 | 55 | 30 | 3 | - | - | 70 | |
50S | 50 | 15 | 8 | 9 | 10 12 14 | 30 | 35 | - | 6 | 6 8 10 | ||||||
50 | 100 | 14 | 11 | 70 | 45 | 40 | 10 | 65 | ||||||||
100 | 45 | 40 | 65 | |||||||||||||
150 | 50 | 50 | 15 | 8 | 9 | 30 | 35 | - | 75 | 60 | 6 | - | 105 | |||
70 | 100 | 14 | 11 | 70 | 40 | 10 | 55 | |||||||||
75 | 75 | 50 | ||||||||||||||
100 | 100 | 70 | 45 | 40 | 65 | |||||||||||
200 | 75 | 75 | 15 | 14 | 11 | 50 | 40 | - | 110 | 70 | 10 | 55 | 145 | |||
120 | 100 | 70 | 50 | 50 | 75 | |||||||||||
250 | 120 | 100 | 18 | 15 | 11 | 70 | 50 | 50 | 140 | 90 | 10 | 75 | 185 | |||
300 | 150 | 40 | 90 | 190 | 85 | 235 | ||||||||||
350 | 150 | 230 | 100 | 280 | ||||||||||||
400 | 150 | 260 | 120 | 320 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Loading...
Material | Cast Iron | Strength | Standard (Cast Products) |
---|
Please check the type/dimensions/specifications of the part BIKD150-75 in the Angle Plates - Cast Iron series.
Part Number |
---|
BIKD100-50S |
BIKD150-100 |
BIKD150-50 |
BIKD200-120 |
BIKD200-75 |
BIKD250-120 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy