(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
O-Rings - for Dynamic Applications, Thermal or Chemical Resistance, P Series
- Volume Discount
•Material : Perfluoro Rubber
For complete product overview and details on O-Rings - P Series, Chemical / Heat Resistant see the sections below:
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
| Type | Grade | Color | Max. Operating Temp. | [ M ]Material |
| MPPEM | Chemical Resistant Grade | Black | 260°C | Perfluoro Rubber |
| MPPEJ | Special Heat Resistant Grade | Black | 320°C |
Specifications
| Part Number |
| MPPEM5 |
■P Series (For Mounting, Dynamic)
| Part Number | Nominal Number | W | I.D. | Matching Material | |||||
| Type | No. | do | MPPEM, MPPEJ Tolerance | d | Tolerance | D | Tolerance | ||
| MPPEM (Chemical Resistant Grade) MPPEJ (Special Heat Resistant Grade) | 3 | 3 | 1.9±0.08 | 2.8 | ±0.16 | 3 | 0 - 0.05 | 6 | + 0.05 0 |
| 4 | 4 | 3.8 | 4 | 7 | |||||
| 5 | 5 | 4.8 | ±0.18 | 5 | 8 | ||||
| 6 | 6 | 5.8 | 6 | 9 | |||||
| 7 | 7 | 6.8 | ±0.19 | 7 | 10 | ||||
| 8 | 8 | 7.8 | 8 | 11 | |||||
| 9 | 9 | 8.8 | ±0.20 | 9 | 12 | ||||
| 10 | 10 | 9.8 | 10 | 13 | |||||
| 11 | 11 | 2.4±0.09 | 10.8 | ±0.21 | 11 | 0 - 0.06 | 15 | + 0.06 0 | |
| 12 | 12 | 11.8 | ±0.22 | 12 | 16 | ||||
| 14 | 14 | 13.8 | 14 | 18 | |||||
| 15 | 15 | 14.8 | ±0.24 | 15 | 19 | ||||
| 16 | 16 | 15.8 | 16 | 20 | |||||
| 18 | 18 | 17.8 | ±0.25 | 18 | 22 | ||||
| 20 | 20 | 19.8 | ±0.26 | 20 | 24 | ||||
| 21 | 21 | 20.8 | ±0.27 | 21 | 25 | ||||
| 22 | 22 | 21.8 | ±0.28 | 22 | 26 | ||||
| 24 | 24 | 3.5±0.1 | 23.7 | 24 | 0 - 0.08 | 30 | + 0.08 0 | ||
| 25 | 25 | 24.7 | ±0.30 | 25 | 31 | ||||
| 26 | 26 | 25.7 | ±0.31 | 26 | 32 | ||||
| 28 | 28 | 27.7 | ±0.33 | 28 | 34 | ||||
| 29 | 29 | 28.7 | ±0.34 | 29 | 35 | ||||
| 30 | 30 | 29.7 | 30 | 36 | |||||
■Specifications
| Type | MPPEM | MPPEJ | |
| Chemical Resistant Grade | Special Heat Resistant Grade | ||
| Color | Black | Black | |
| Hardness | (Shore) | 75 | 74 |
| Tensile Strength | (kgf/cm2) | 216 | 161 |
| Elongation | (%) | 183 | 205 |
| Operating Temperature Range | (°C) | 260 | 320 |
| Compression Set | 200°Cx70h (%) | 21 | 19 |
| 230°Cx70h (%) | 31 | 26 | |
■Chemical Resistance Data (MPPEM Chemical Resistant) [Evaluation] A: ΔV =~5% B: 5~20% C: 21~35%
*Data above are not guaranteed values but experimental value.
For actual use, confirm the applicability under specific conditions.
| Chemical | Soaking Temperature | Soaking Time | Volume Change |
| (°C) | (Day) | (ΔV%) | |
| Sodium Hydroxide (50%) | 150 | 7 | A |
| Ammonia Water (35%) | 45 | 20 | A |
| Ammonia | 100 | 7 | A |
| N-Butylamine | 23 | 7 | A |
| Formic Acid (12%) | 100 | 7 | B |
| Chlorosulfonic Acid | 23 | 7 | A |
| Hydrochloric Acid (37%) | 24 | 28 | B |
| Nitric Acid (65%) | 40 | 30 | B |
| Sulfuric Acid (94%) | 70 | 14 | A |
| Phosphoric Acid (45%) | 60 | 7 | A |
| Hydrogen Sulfide | 70 | 7 | A |
| Hydrogen Fluoride (50%) | 80 | 7 | B |
| MIBK (Methyl Isobutyl Ketone) | 118 | 7 | A |
| Dimethylformamide | 153 | 7 | B |
| 1.2-Dichlorobenzene | 180 | 7 | B |
| Chlorobenzol | 100 | 7 | A |
| R123 (CFC) | 24 | 28 | C |
| Steam | 121 | 7 | A |
| Phenol | 220 | 7 | A |
| Ethylene Oxide | 23 | 7 | A |
For actual use, confirm the applicability under specific conditions.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| MPPEJ3 |
| MPPEJ4 |
| MPPEJ5 |
| MPPEJ6 |
| MPPEJ7 |
| MPPEJ8 |
| MPPEJ9 |
| MPPEJ10 |
| MPPEJ11 |
| MPPEJ12 |
| MPPEJ14 |
| MPPEJ15 |
| MPPEJ16 |
| MPPEJ18 |
| MPPEJ20 |
| MPPEJ21 |
| MPPEJ22 |
| MPPEJ24 |
| MPPEJ25 |
| MPPEJ26 |
| MPPEJ28 |
| MPPEJ29 |
| MPPEJ30 |
Loading...
More Information
■Features
①Excellent resistance required in extreme conditions such as strong acid, strong alkali, amines, steam and high temperature polar solvent (260~320°C).
②Low gas precipitation, with low out-gas property and can be used under high vacuum.
③Heavy metal and molding agents are not used in the process of production.
①Excellent resistance required in extreme conditions such as strong acid, strong alkali, amines, steam and high temperature polar solvent (260~320°C).
②Low gas precipitation, with low out-gas property and can be used under high vacuum.
③Heavy metal and molding agents are not used in the process of production.
Basic Information
| Material | Perfluoro Rubber |
|---|
Specification/Dimensions
-
Wire diameter W(mm)
-
I.D. do (or d)(Ø)
-
Nominal Number
-
type
- MPPEJ
- MPPEM
-
Application
- Heat Resistant
- Chemical Resistant
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 8 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- O-Ring BR Backup Ring (Polytetrafluoro Ethylene Plastic) JIS-B-2407
- O-Ring - GS - for Retention
- O-Ring SO Retaining Use
- Extreme Temperature & Chemical Resistant FFKM O-Rings
- High Temperature Silicone O-Rings
- Chemical-Resistant Square-Profile Viton O-Rings
- Oil-Resistant Metal Detectable FDA Buna-N O-Rings
- Oil-Resistant Internally Lubricated Buna-N O-Rings
Complementary Products
MISUMI Unit Example related to this product
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy