(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.

All Categories

Applications

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Need Help?

Order/Quote

Order

Order

/ Order
/ Order

Part Number Checker

Catalog Request

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 p.m. 11/23/2024 to 5:00 p.m. (CST) 11/24/2024. We apologize for the inconvenience.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.

Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Manual Stages - Configurable X/XY/Z-Axis Stages

Click this image to zoom it.

Move the mouse over the image to zoom

MISUMI

Selectable kinds of Feed Position, Feed/Clamping Methods and Grease.

(i)Caution

Delivery times for some of our products may be delayed as national government authorities have imposed limit of capacity at our production sites.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

X/XY/Z-Axis Stages - Selectable:Related Image

Specifications

Part Number	-	①Feed Position	-	②Feeding Method	-	③Clamp Type	-	④Grease
FSXYR40	-	C	-	F	-	S	-	R

Part Number			Stage Used
Type	Axis	Guide	Stage Used
FS	X	R	XSG(Click here)
	X	C	XPG(Click here)
	XY	R	XYSG(Click here)
	Z	R	ZSG(Click here)

* Refer to the stage with the same size as the table.
Guide Type R: Linear Ball Slide
C: Cross Roller Slide

Slide Stage			①Feed Position	②Feeding Method		③Clamp Type	④Grease
Axis	Type	Size	Center / Side	Micrometer Head (Stroke: mm)	Feed Screw (Pitch / Stroke: mm)	Selection	Selection
X	FSXR (Linear Ball)	25	(Center): A AR : AZ AZR (Side): C CR : CZ CZR	N (Standard ±3.2)	F (Hex Socket 0.5/±3.2) B (Feed Screw 0.5/±3.2)	S (Standard)	G (Standard) R (Clean Env. Compatible) *²
		40		N (Standard ±6.5) M (Coarse Fine Feed ±6.5)	F (Hex Socket 0.5/±6.5) B (Feed Screw 0.5/±6.5) J (Feed Screw 1.0/±6.5)	S (Standard) H (Disc) P (Opposed) Applicable only when C and CR, and the feed type is N or F.
		50
		60
		70
		80		N (Standard ±12.5) M (Coarse Fine Feed ±6.5) D (Digital Micrometer ±12.5) *1Only applicable to feed position A ,AR and C.		S (Standard) H (Disc)
	FSXC (Cross Roller)	25	(Center): A AR : AZ AZR (Side): C CR : CZ CZR	N (Standard ±3.2)	F (Hex Socket 0.5/±3.2) B (Feed Screw 0.5/±3.2)	S (Standard)	G (Standard) R (Clean Env. Compatible) *²
		40		N (Standard ±6.5) M (Coarse Fine Feed ±6.5)	F (Hex Socket 0.5/±6.5) B (Feed Screw 0.5/±6.5) J (Feed Screw 1.0/±6.5)	S (Standard) H (Disc) P (Opposed) Applicable only when C and CR, and the feed type is N or F.
		60
		80		N (Standard ±12.5) M (Coarse Fine Feed ±6.5) D (Digital Micrometer ±12.5) *1Only applicable to feed position A ,AR and C.		S (Standard)
XY	FSXYR (Linear Ball)	25	(Center): A AR (Side): C CR	N (Standard ±3.2)	F (Hex Socket 0.5/±3.2) B (Feed Screw 0.5/±3.2)	S (Standard)	G (Standard) R (Clean Env. Compatible) *²
		40		N (Standard ±6.5) M (Coarse Fine Feed ±6.5)	F (Hex Socket 0.5/±6.5) B (Feed Screw 0.5/±6.5) J (Feed Screw 1.0/±6.5)	S (Standard) H (Disc) P (Opposed) Applicable only when C and CR, and the feed type is N or F.
		50
		60
		70
		80		N (Standard ±12.5) M (Coarse Fine Feed ±6.5) D (Digital Micrometer ±12.5) *1Only applicable to feed position A ,AR and C.		S (Standard) H (Disc) Only applicable to C, CR.
Z	FSZR (Linear Ball)	25	(Center): AZ AZR (Side): C CR : CZ CZR Feeding direction of C, CR is upward; that of the others is downwards.	N (Standard ±3.2)	F (Hex Socket 0.5/±3.2) B (Feed Screw 0.5/±3.2)	S (Standard)	G (Standard) R (Clean Env. Compatible) *²
		40		N (Standard ±6.5) M (Coarse / Fine Feeds ±6.5)Not applicable to C, CR.	F (Hex Socket 0.5/±6.5) B (Feed Screw 0.5/±6.5) J (Feed Screw 1.0/±6.5)	S (Standard)H (Disc) P (Opposed) Applicable only when C and CR, and the feed type is N and F.
		50
		60
		70
		80		N (Standard ±12.5) M (Coarse/Fine Feeds ±6.5) Not applicable to C, CR.		S (Standard) H (Disc)

*1 Only clamp position will be changed for Digital Micrometer A and AR. *2 When feed type M (coarse / fine feeds) or D (digital micrometer) is selected, grease R (clean env. compatible) is not applicable.
[ ! ]Knob Cover HDCVR13 (Sold Separately): Ø13 mm knob diameter can be increased by installing the cover. >> Click here
[ ! ]Extension Cover HDEXT13 (Sold Separately): Ø13 mm head or feed screw knobs can be extended by installing the cover. >> Click here

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
FSXC80-A-[B,D,F,J,M,N]-S-[G,R]
FSXC80-AR-[B,D,F,J,M,N]-S-[G,R]
FSXC80-AZ-[B,F,J,M,N]-S-[G,R]
FSXC80-C-[B,D,F,J,M,N]-S-[G,R]
FSXC80-CR-[B,F,J,M,N]-S-[G,R]
FSXC80-CZ-[B,F,J,M,N]-S-[G,R]
FSXR80-A-[B,D,F,J,M,N]-[H,S]-[G,R]
FSXR80-AR-[B,D,F,J,M,N]-[H,S]-[G,R]
FSXR80-AZ-[B,F,J,M,N]-[H,S]-[G,R]
FSXR80-AZR-[B,F,J,M,N]-[H,S]-[G,R]
FSXR80-C-[B,D,F,J,M,N]-[H,S]-[G,R]
FSXR80-CR-[B,F,J,M,N]-[H,S]-[G,R]
FSXR80-CZ-[B,F,J,M,N]-[H,S]-[G,R]
FSXR80-CZR-[B,F,J,M,N]-[H,S]-[G,R]
FSXYR80-A-[B,D,F,J,M,N]-[H,S]-[G,R]
FSXYR80-AR-[B,D,F,J,M,N]-[H,S]-[G,R]
FSXYR80-C-[B,F,J,M,N]-[H,S]-[G,R]
FSXYR80-CR-[B,F,J,M,N]-[H,S]-[G,R]

Minimum order quantity	Days to Ship	RoHS	Travel Distance (X Distance) (Selection Range) (mm)	Travel Distance (Y Distance) (Selection Range) (mm)	Load Capacity (Range) (N)	Table Size (Length) L (Range) (mm)	Table Size (Width) W (Range) (mm)	Table Size (Thickness) H (Range) (mm)	Guiding Mechanism	Table Material	Table Surface Treatment	Table Size (Length) L (mm)	Table Size (Width) W (mm)	Allowable Load (N)	Travel Distance (X Distance) (mm)	Travel Distance (Y Distance) (mm)	Table Size (Thickness) H (mm)	Travel Distance (Z Distance) (mm)	Table Parallelism (µm)	Moment Rigidity (Pitching) ("/N•cm)	Moment Rigidity (Yawing) ("/N•cm)	Moment Rigidity (Rolling) ("/N•cm)	Feed Knob Position	Reversed	Grease Selection	Clamp Method Selection	Feeding Method Selection
1 Piece(s)	12 Days or more	10	±10~30mm	-	50.1~100	61~90	61~90	15.1~20	Cross Roller	Aluminum Alloy	Black Anodize	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Center	Standard	G (Standard) / R (For Clean Environment)	Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]
1 Piece(s)	12 Days or more	10	±10~30mm	-	50.1~100	61~90	61~90	15.1~20	Cross Roller	Aluminum Alloy	Black Anodize	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Center	Right and Left	G (Standard) / R (For Clean Environment)	Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]
1 Piece(s)	12 Days or more	10	±10~30mm	-	50.1~100	61~90	61~90	15.1~20	Cross Roller	Aluminum Alloy	Black Anodize	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Center	Top and Bottom	G (Standard) / R (For Clean Environment)	Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 Piece(s)	12 Days or more	10	±10~30mm	-	50.1~100	61~90	61~90	15.1~20	Cross Roller	Aluminum Alloy	Black Anodize	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Side	Standard	G (Standard) / R (For Clean Environment)	Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]
1 Piece(s)	12 Days or more	10	±10~30mm	-	50.1~100	61~90	61~90	15.1~20	Cross Roller	Aluminum Alloy	Black Anodize	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Side	Right and Left	G (Standard) / R (For Clean Environment)	Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 Piece(s)	12 Days or more	10	±10~30mm	-	50.1~100	61~90	61~90	15.1~20	Cross Roller	Aluminum Alloy	Black Anodize	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Side	Top and Bottom	G (Standard) / R (For Clean Environment)	Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 Piece(s)	12 Days or more	-	±10~30mm	-	100.1 or More	61~90	61~90	15.1~20	Linear Ball	[Stainless Steel] 440C Stainless Steel	Electroless Nickel Plating	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Center	Standard	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]
1 Piece(s)	12 Days or more	-	±10~30mm	-	100.1 or More	61~90	61~90	15.1~20	Linear Ball	[Stainless Steel] 440C Stainless Steel	Electroless Nickel Plating	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Center	Right and Left	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]
1 Piece(s)	12 Days or more	10	±10~30mm	-	100.1 or More	61~90	61~90	15.1~20	Linear Ball	[Stainless Steel] 440C Stainless Steel	Electroless Nickel Plating	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Center	Top and Bottom	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 Piece(s)	12 Days or more	10	±10~30mm	-	100.1 or More	61~90	61~90	15.1~20	Linear Ball	[Stainless Steel] 440C Stainless Steel	Electroless Nickel Plating	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Center	Relative Position	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 Piece(s)	12 Days or more	10	±10~30mm	-	100.1 or More	61~90	61~90	15.1~20	Linear Ball	[Stainless Steel] 440C Stainless Steel	Electroless Nickel Plating	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Side	Standard	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]
1 Piece(s)	12 Days or more	10	±10~30mm	-	100.1 or More	61~90	61~90	15.1~20	Linear Ball	[Stainless Steel] 440C Stainless Steel	Electroless Nickel Plating	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Side	Right and Left	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 Piece(s)	12 Days or more	10	±10~30mm	-	100.1 or More	61~90	61~90	15.1~20	Linear Ball	[Stainless Steel] 440C Stainless Steel	Electroless Nickel Plating	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Side	Top and Bottom	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 Piece(s)	12 Days or more	10	±10~30mm	-	100.1 or More	61~90	61~90	15.1~20	Linear Ball	[Stainless Steel] 440C Stainless Steel	Electroless Nickel Plating	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Side	Relative Position	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 Piece(s)	10 Days or more	-	±10~30mm	±10~30mm	100.1 or More	61~90	61~90	35.1~40	Linear Ball	[Stainless Steel] 440C Stainless Steel	Electroless Nickel Plating	80	80	255.8	±12.5	±12.5	40	-	40	0.06	0.08	0.06	Center	Standard	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]
1 Piece(s)	10 Days or more	-	±10~30mm	±10~30mm	100.1 or More	61~90	61~90	35.1~40	Linear Ball	[Stainless Steel] 440C Stainless Steel	Electroless Nickel Plating	80	80	255.8	±12.5	±12.5	40	-	40	0.06	0.08	0.06	Center	Right and Left	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]
1 Piece(s)	12 Days or more	10	±10~30mm	±10~30mm	100.1 or More	61~90	61~90	35.1~40	Linear Ball	[Stainless Steel] 440C Stainless Steel	Electroless Nickel Plating	80	80	255.8	±12.5	±12.5	40	-	40	0.06	0.08	0.06	Side	Standard	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 Piece(s)	12 Days or more	10	±10~30mm	±10~30mm	100.1 or More	61~90	61~90	35.1~40	Linear Ball	[Stainless Steel] 440C Stainless Steel	Electroless Nickel Plating	80	80	255.8	±12.5	±12.5	40	-	40	0.06	0.08	0.06	Side	Right and Left	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

More Information

(XSG>>Click here and XPG>>Click here)

(ZSG>>Click here and ZPG>>Click here)

■Other Information about Stages
Stage Selection Table Click here, Click here
Overview, Technical Information Click here, Click here

Product TOP

Basic Information

Through Hole (Table Center Hole)	No

Configure

18 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Travel Distance (Y Distance) (Selection Range)(mm)
- ~ ±10mm
- ±10~30mm
Clear
Load Capacity (Range)(N)
- 5~30
- 30.1~50
- 50.1~100
- 100.1 or More
Clear
Table Size (Length) L (Range)(mm)
~25

26~40

41~60

61~90
Clear
Table Size (Width) W (Range)(mm)
~25

26~40

41~60

61~90
Clear
Table Size (Thickness) H (Range)(mm)
1~15

15.1~20

20.1~25

30.1~35

35.1~40
Clear
Guiding Mechanism
- Cross Roller
- Linear Ball
Clear
Table Material
- Stainless Steel
  - 440C Stainless Steel
- Aluminum Alloy
Clear
Table Surface Treatment
- Black Anodize
- Electroless Nickel Plating
Clear
Table Size (Length) L(mm)
25

40

50

60

70

80
Clear
Table Size (Width) W(mm)
25

40

50

60

70

80
Clear
Allowable Load(N)
9.8

19.6

38.2

39.2

49

95.2

98

144.2

147

192.1

196

219.7

225.4

255.8

264.6
Clear
Travel Distance (X Distance)(mm)
±3.2

±6.5

±12.5
Clear
Travel Distance (Y Distance)(mm)
±3.2

±6.5

±12.5
Clear
Table Size (Thickness) H(mm)
12

15

16

18

20

24

32

36

40
Clear
Travel Distance (Z Distance)(mm)
±3.2

±6.5

±12.5
Clear
Feed Knob Position
- Center
- Side
Clear
Reversed
- Standard
- Right and Left
- Top and Bottom
- Relative Position
Clear
Grease Selection
- G (Standard)
- R (For Clean Environment)
Clear
Clamp Method Selection
- Disc Clamp [H]
- Opposed Clamp [P]
- Standard [S]
Clear
Feeding Method Selection
- Feed Screw Pitch 0.5 [B]
- Screw with Hex Socket, Pitch 0.5 [F]
- Feed Screw Pitch 1.0 [J]
- Coarse/Fine Micrometer Head [M]
- Digital Micrometer Head [D]
- Standard Micrometer Head [N]
Clear
type
- FSXC
- FSXR
- FSXYR
- FSZR
Clear
Travel Distance (X Distance) (Selection Range)(mm)
- ~ ±10mm
- ±10~30mm
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

10 Days or Less

12 Days or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Set - Up Plates
MISUMI Days to Ship : 14 Days or more
Accessories - Positioning Stage Extension Handles
MISUMI Days to Ship : 8 Days or more

Tech Support

Technical Support: Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com; Mon. - Fri. 8 a.m. - 6 p.m.; Technical Inquiry

Top of the page

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)

Contact Information: Contact Us

Inquiry Format

All Categories

Categories

Applications

Brands

How can we improve?

Manual Stages - Configurable X/XY/Z-Axis Stages

(i)Caution

Specifications

Part Number

More Information

Basic Information

Configure

Specification/Dimensions

Travel Distance (Y Distance) (Selection Range)(mm)

Load Capacity (Range)(N)

Table Size (Length) L (Range)(mm)

Table Size (Width) W (Range)(mm)

Table Size (Thickness) H (Range)(mm)

Guiding Mechanism

Table Material

Table Surface Treatment

Table Size (Length) L(mm)

Table Size (Width) W(mm)

Allowable Load(N)

Travel Distance (X Distance)(mm)

Travel Distance (Y Distance)(mm)

Table Size (Thickness) H(mm)

Travel Distance (Z Distance)(mm)

Feed Knob Position

Reversed

Grease Selection

Clamp Method Selection

Feeding Method Selection

type

Travel Distance (X Distance) (Selection Range)(mm)

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Tech Support

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)