(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Rotary Shafts - Both ends stepped and externally threaded. (Part Numbers)

Rotary Shafts - Both ends stepped and externally threaded.

Click this image to zoom it.

Move the mouse over the image to zoom

  • Lead Time Reduction

New diameter sizes (13, 16, 17, 18 and 22) are added for h9 tolerance types. [3/31/23]
Straight Rotary Shafts - Both Ends Stepped and Threaded are available in 1045 Carbon Steel or Equivalent and 304 Stainless Steeland 4137 Alloy Steel or Equivalent, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]15mm - 990mm. Use the alteration LKC to specify the length in 0.1mm increment.

Inch option available, please click Here.

  • METRIC
  • inCAD Components
Rotary Shafts - Both Ends Stepped and Threaded:Related Image
・Materials
TypeTolerance[ M ]Material[ S ]Surface Treatment
 StandardWrench FlatsDP, Q
NSFRMHMNSFRMHMSh9
(Cold-drawn)
h71045 Carbon Steel or Equivalent-
SFRMHMSFRMHMSBlack Oxide
PSFRMHMPSFRMHMSElectroless Nickel Plating
SSFRMHMSSFRMHMS304 Stainless Steel-
NSFRMGMNSFRMGMSg61045 Carbon Steel or Equivalent-
SFRMGMSFRMGMSBlack Oxide
PSFRMGMPSFRMGMSElectroless Nickel Plating
SSFRMGMSSFRMGMS304 Stainless Steel-
NSFRHMNSFRHMSh7
(Ground)
h71045 Carbon Steel or Equivalent-
SFRHMSFRHMSBlack Oxide
PSFRHMPSFRHMSElectroless Nickel Plating
SSFRHMSSFRHMS304 Stainless Steel-
NSFRMNSFRMSg6
(Ground)
g61045 Carbon Steel or Equivalent-
SFRMSFRMSBlack Oxide
PSFRMPSFRMSElectroless Nickel Plating
SSFRMSSFRMS304 Stainless Steel-
HFRM-4137 Alloy Steel or Equivalent
Hardness: 30 ~ 35HRC
Black Oxide

Specifications

 Part Number-L-F-B-P-T-S-Q-SC
①D part h9 / P, Q part h7
③h7 (Ground) with Wrench Flat
SFRMHM30
SFRHMS25
-
-
250
200
-
-
F30
F25
-
-
B8
B15
-
-
P10
P12
-
-
T30
T25
-
-
S8
S15
-
-
Q10
Q12

-
 

SC30
 
①D tolerance h9 (Cold-drawn) / P, Q tolerance h7 ②D tolerance h9 (Cold-drawn) / P, Q tolerance g6
Part Number0.1mm Increment1mm IncrementP, Q
Selection
1mm IncrementW2(Y)max.
TypeDLF • TBSSC Wrench Flats Type only
StandardWrench Flats
①D part h9 / P, Q part h7
NSRMHM
SFRMHM
PSFRMHM
SSFRMHM

(D6 is not available for SSFRMHM.)
②D part h9 / P, Q part g6
NSFRMGM
SFRMGM
PSFRMGM
SSFRMGM

(D6 is not available for SSFRMGM.)
①D part h9 / P, Q part h7
NSRMHMS
SFRMHMS
PSFRMHMS
SSFRMHMS

(D6 is not available for SSFRMHMS.)
②D part h9 / P, Q part g6
NSFRMGMS
SFRMGMS
PSFRMGMS
SSFRMGMS

(D6 is not available for SSFRMGMS.)
615.0~390.05≤F≤Px7
5≤T≤Qx7
When P≤6
B≤Px3
&
B≤F-2

When P=8 or 10
B≤Px3
&

B≤F-3
When P≥12
B≤Px3
&

B≤F-5
When Q≤6
S≤Qx3
&

S≤T-2
When Q=8 or 10
S≤Qx3
&
S≤T-3

When Q≥12
S≤Qx3
&
S≤T-5
345        SC+2≤L

SC=0
or SC≥1
58300
815.0~490.03456       7400
1015.0~590.0 4568      8500
1215.0~690.0  56810     1010600
1515.0~790.0  5681012    13700
2030.0~990.0   68101216   17800
2530.0~990.0    810121620  22
3030.0~990.0    81012162024 2715
3540.0~990.0     10121620243030
③h7 (Ground)
Part Number0.1mm Increment1mm IncrementP, Q
Selection
1mm IncrementW2(Y)max.
TypeDLFBSSC Wrench Flats Type only
StandardWrench Flats
NSFRHM

SFRHM

PSFRHM

SSFRHM
NSFRHMS

SFRHMS

PSFRHMS

SSFRHMS
615.0~390.05≤F≤Px7
5≤T≤Qx7
When P≤6
B≤Px3
&
B≤F-2

When P=8 or 10
B≤Px3
&
B≤F-3

When P≥12
B≤Px3
&

B≤F-5
When Q≤6
S≤Qx3
&
S≤T-2
When Q=8 or 10
S≤Qx3
&

S≤T-3
When Q≥12
S≤Qx3
&
S≤T-5
345        SC+2≤L

SC=0
or SC≥1
58300
815.0~490.03456       7400
1015.0~590.0 4568      8500
1215.0~690.0  56810     1010600
1515.0~790.0  5681012    13700
1730.0~890.0  5681012    14800
2030.0~990.0   68101216   17
2530.0~990.0    810121620  22
3030.0~990.0    81012162024 2715
3540.0~990.0     10121620243030
4040.0~990.0      12162024303620
5040.0~990.0       1620243041
④g6 (Ground)
Part Number0.1mm Increment1mm IncrementP, Q
Selection
1mm IncrementW2(Y)max.
TypeDLF • TBSSC Wrench Flats Type only
StandardWrench Flats
NSFRM

SFRM

PSFRM

SSFRM

(D13, 16, 18 and 22 are not available for SSFRM.)

*HFRM
(Only * marked sizes are available.)
NSFRMS

SFRMS

PSFRMS

SSFRMS

(D13, 16, 18 and 22 are not available for SSFRMS.)
 615.0~390.05≤F≤Px7
5≤T≤Qx7
When P≤6
B≤Px3
&
B≤F-2

When P=8 or 10
B≤Px3
&

B≤F-3
When P≥12
B≤Px3
&

B≤F-5
When Q≤6
S≤Qx3
&

S≤T-2
When Q=8 or 10
S≤Qx3
&
S≤T-3

When Q≥12
S≤Qx3
&
S≤T-5
345        SC+2≤L

SC=0
or SC≥1
58300
 815.0~490.03456       7400
 1015.0~590.0 4568      8500
 1215.0~690.0  56810     1010600
 1315.0~690.0  56810     11
*1515.0~790.0  5681012    13700
 1615.0~890.0  5681012    14800
 1730.0~890.0  5681012    
 1830.0~890.0  5681012    15
*2030.0~990.0   68101216   17
 2230.0~990.0   68101216   19
*2530.0~990.0    810121620  22
*3030.0~990.0    81012162024 2715
*3540.0~990.0     10121620243030
*4040.0~990.0      12162024303620
*5040.0~990.0       1620243041
[ ! ] When D-P (Q)≤2, chamfer C at the step is 0.2 or less.

Alterations


[ ! ]For Keyway Details, Click here.
[ ! ]For detailed undercut dimensions, Click here.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
HFRM15-[25-690/0.1]-F[2-84/0.1]-B[2-36/1]-P[5,​6,​8,​10,​12]-T[2-84/0.1]-S[2-36/1]-Q[5,​6,​8,​10,​12]
HFRM15-[25-690/0.1]-F[2-84/0.1]-B[2-36/1]-P[5,​6,​8,​10,​12]-T[2-84/0.1]-S[2-36/1]-QMC[5,​6,​8,​10,​12]
HFRM15-[25-690/0.1]-F[2-84/0.1]-B[2-36/1]-PMC[5,​6,​8,​10,​12]-T[2-84/0.1]-S[2-36/1]-Q[5,​6,​8,​10,​12]
HFRM15-[25-690/0.1]-F[2-84/0.1]-B[2-36/1]-PMC[5,​6,​8,​10,​12]-T[2-84/0.1]-S[2-36/1]-QMC[5,​6,​8,​10,​12]
HFRM20-[30-790/0.1]-F[2-112/0.1]-B[2-48/1]-P[6,​8,​10,​12,​16]-T[2-112/0.1]-S[2-48/1]-Q[6,​8,​10,​12,​16]
HFRM20-[30-790/0.1]-F[2-112/0.1]-B[2-48/1]-P[6,​8,​10,​12,​16]-T[2-112/0.1]-S[2-48/1]-QMC[6,​8,​10,​12,​15,​17]
HFRM20-[30-790/0.1]-F[2-112/0.1]-B[2-48/1]-PMC[6,​8,​10,​12,​15,​17]-T[2-112/0.1]-S[2-48/1]-Q[6,​8,​10,​12,​16]
HFRM20-[30-790/0.1]-F[2-112/0.1]-B[2-48/1]-PMC[6,​8,​10,​12,​15,​17]-T[2-112/0.1]-S[2-48/1]-QMC[6,​8,​10,​12,​15,​17]
HFRM25-[30-790/0.1]-F[3-140/0.1]-B[2-60/1]-P[8,​10,​12,​16,​20]-T[3-140/0.1]-S[2-60/1]-Q[8,​10,​12,​16,​20]
HFRM25-[30-790/0.1]-F[3-140/0.1]-B[2-60/1]-P[8,​10,​12,​16,​20]-T[3-140/0.1]-S[2-60/1]-QMC[8,​10,​12,​15,​17,​20]
HFRM25-[30-790/0.1]-F[3-140/0.1]-B[2-60/1]-PMC[8,​10,​12,​15,​17,​20]-T[3-140/0.1]-S[2-60/1]-Q[8,​10,​12,​16,​20]
HFRM25-[30-790/0.1]-F[3-140/0.1]-B[2-60/1]-PMC[8,​10,​12,​15,​17,​20]-T[3-140/0.1]-S[2-60/1]-QMC[8,​10,​12,​15,​17,​20]
HFRM30-[30-790/0.1]-F[3-168/0.1]-B[2-72/1]-P[8,​10,​12,​16,​20,​24]-T[3-168/0.1]-S[2-72/1]-Q[8,​10,​12,​16,​20,​24]
HFRM30-[30-790/0.1]-F[3-168/0.1]-B[2-72/1]-P[8,​10,​12,​16,​20,​24]-T[3-168/0.1]-S[2-72/1]-QMC[8,​10,​12,​15,​17,​20,​25]
HFRM30-[30-790/0.1]-F[3-168/0.1]-B[2-72/1]-PMC[8,​10,​12,​15,​17,​20,​25]-T[3-168/0.1]-S[2-72/1]-Q[8,​10,​12,​16,​20,​24]
HFRM30-[30-790/0.1]-F[3-168/0.1]-B[2-72/1]-PMC[8,​10,​12,​15,​17,​20,​25]-T[3-168/0.1]-S[2-72/1]-QMC[8,​10,​12,​15,​17,​20,​25]
HFRM35-[40-790/0.1]-F[3-210/0.1]-B[2-90/1]-P[10,​12,​16,​20,​24,​30]-T[3-210/0.1]-S[2-90/1]-Q[10,​12,​16,​20,​24,​30]
HFRM35-[40-790/0.1]-F[3-210/0.1]-B[2-90/1]-P[10,​12,​16,​20,​24,​30]-T[3-210/0.1]-S[2-90/1]-QMC[10,​12,​15,​17,​20,​25,​30]
HFRM35-[40-790/0.1]-F[3-210/0.1]-B[2-90/1]-PMC[10,​12,​15,​17,​20,​25,​30]-T[3-210/0.1]-S[2-90/1]-Q[10,​12,​16,​20,​24,​30]
HFRM35-[40-790/0.1]-F[3-210/0.1]-B[2-90/1]-PMC[10,​12,​15,​17,​20,​25,​30]-T[3-210/0.1]-S[2-90/1]-QMC[10,​12,​15,​17,​20,​25,​30]
HFRM40-[40-790/0.1]-F[5-210/0.1]-B[2-90/1]-P[12,​16,​20,​24,​30]-T[5-210/0.1]-S[2-90/1]-Q[12,​16,​20,​24,​30]
HFRM40-[40-790/0.1]-F[5-210/0.1]-B[2-90/1]-P[12,​16,​20,​24,​30]-T[5-210/0.1]-S[2-90/1]-QMC[12,​15,​17,​20,​25,​30]
HFRM40-[40-790/0.1]-F[5-210/0.1]-B[2-90/1]-PMC[12,​15,​17,​20,​25,​30]-T[5-210/0.1]-S[2-90/1]-Q[12,​16,​20,​24,​30]
HFRM40-[40-790/0.1]-F[5-210/0.1]-B[2-90/1]-PMC[12,​15,​17,​20,​25,​30]-T[5-210/0.1]-S[2-90/1]-QMC[12,​15,​17,​20,​25,​30]
HFRM50-[40-790/0.1]-F[5-210/0.1]-B[2-90/1]-P[16,​20,​24,​30]-T[5-210/0.1]-S[2-90/1]-Q[16,​20,​24,​30]
HFRM50-[40-790/0.1]-F[5-210/0.1]-B[2-90/1]-P[16,​20,​24,​30]-T[5-210/0.1]-S[2-90/1]-QMC[15,​17,​20,​25,​30,​35]
HFRM50-[40-790/0.1]-F[5-210/0.1]-B[2-90/1]-PMC[15,​17,​20,​25,​30,​35]-T[5-210/0.1]-S[2-90/1]-Q[16,​20,​24,​30]
HFRM50-[40-790/0.1]-F[5-210/0.1]-B[2-90/1]-PMC[15,​17,​20,​25,​30,​35]-T[5-210/0.1]-S[2-90/1]-QMC[15,​17,​20,​25,​30,​35]
PSFRHM6-[15-390/0.1]-F[2-35/0.1]-B[2-15/1]-P[3,​4,​5]-T[2-35/0.1]-S[2-15/1]-Q[3,​4,​5]
PSFRHM6-[15-390/0.1]-F[2-35/0.1]-B[2-15/1]-P[3,​4,​5]-T[2-35/0.1]-S[2-15/1]-QMC[3,​4,​5]
PSFRHM6-[15-390/0.1]-F[2-35/0.1]-B[2-15/1]-PMC[3,​4,​5]-T[2-35/0.1]-S[2-15/1]-Q[3,​4,​5]
PSFRHM6-[15-390/0.1]-F[2-35/0.1]-B[2-15/1]-PMC[3,​4,​5]-T[2-35/0.1]-S[2-15/1]-QMC[3,​4,​5]
PSFRHM8-[15-490/0.1]-F[2-42/0.1]-B0-P[3,​4,​5,​6]-T[2-42/0.1]-S[2-18/1]-Q[3,​4,​5,​6]
PSFRHM8-[15-490/0.1]-F[2-42/0.1]-B0-P[3,​4,​5,​6]-T[2-42/0.1]-S[2-18/1]-QMC[3,​4,​5,​6]
PSFRHM8-[15-490/0.1]-F[2-42/0.1]-B0-PMC[3,​4,​5,​6]-T[2-42/0.1]-S[2-18/1]-Q[3,​4,​5,​6]
PSFRHM8-[15-490/0.1]-F[2-42/0.1]-B0-PMC[3,​4,​5,​6]-T[2-42/0.1]-S[2-18/1]-QMC[3,​4,​5,​6]
PSFRHM8-[15-490/0.1]-F[2-42/0.1]-B[3-18/1]-P[3,​4,​5,​6]-T[2-42/0.1]-S[2-18/1]-Q[3,​4,​5,​6]
PSFRHM8-[15-490/0.1]-F[2-42/0.1]-B[3-18/1]-P[3,​4,​5,​6]-T[2-42/0.1]-S[2-18/1]-QMC[3,​4,​5,​6]
PSFRHM8-[15-490/0.1]-F[2-42/0.1]-B[3-18/1]-PMC[3,​4,​5,​6]-T[2-42/0.1]-S[2-18/1]-Q[3,​4,​5,​6]
PSFRHM8-[15-490/0.1]-F[2-42/0.1]-B[3-18/1]-PMC[3,​4,​5,​6]-T[2-42/0.1]-S[2-18/1]-QMC[3,​4,​5,​6]
PSFRHM10-[15-590/0.1]-F[2-56/0.1]-B[2-24/1]-P[4,​5,​6,​8]-T[2-56/0.1]-S[2-24/1]-Q[4,​5,​6,​8]
PSFRHM10-[15-590/0.1]-F[2-56/0.1]-B[2-24/1]-P[4,​5,​6,​8]-T[2-56/0.1]-S[2-24/1]-QMC[4,​5,​6,​8]
PSFRHM10-[15-590/0.1]-F[2-56/0.1]-B[2-24/1]-PMC[4,​5,​6,​8]-T[2-56/0.1]-S[2-24/1]-Q[4,​5,​6,​8]
PSFRHM10-[15-590/0.1]-F[2-56/0.1]-B[2-24/1]-PMC[4,​5,​6,​8]-T[2-56/0.1]-S[2-24/1]-QMC[4,​5,​6,​8]
PSFRHM12-[15-690/0.1]-F[2-70/0.1]-B[2-30/1]-P[5,​6,​8,​10]-T[2-70/0.1]-S[2-30/1]-Q[5,​6,​8,​10]
PSFRHM12-[15-690/0.1]-F[2-70/0.1]-B[2-30/1]-P[5,​6,​8,​10]-T[2-70/0.1]-S[2-30/1]-QMC[5,​6,​8,​10]
PSFRHM12-[15-690/0.1]-F[2-70/0.1]-B[2-30/1]-PMC[5,​6,​8,​10]-T[2-70/0.1]-S[2-30/1]-Q[5,​6,​8,​10]
PSFRHM12-[15-690/0.1]-F[2-70/0.1]-B[2-30/1]-PMC[5,​6,​8,​10]-T[2-70/0.1]-S[2-30/1]-QMC[5,​6,​8,​10]
PSFRHM15-[15-790/0.1]-F[2-84/0.1]-B[2-36/1]-P[5,​6,​8,​10,​12]-T[2-84/0.1]-S[2-36/1]-Q[5,​6,​8,​10,​12]
PSFRHM15-[15-790/0.1]-F[2-84/0.1]-B[2-36/1]-P[5,​6,​8,​10,​12]-T[2-84/0.1]-S[2-36/1]-QMC[5,​6,​8,​10,​12]
PSFRHM15-[15-790/0.1]-F[2-84/0.1]-B[2-36/1]-PMC[5,​6,​8,​10,​12]-T[2-84/0.1]-S[2-36/1]-Q[5,​6,​8,​10,​12]
PSFRHM15-[15-790/0.1]-F[2-84/0.1]-B[2-36/1]-PMC[5,​6,​8,​10,​12]-T[2-84/0.1]-S[2-36/1]-QMC[5,​6,​8,​10,​12]
PSFRHM17-[30-890/0.1]-F[2-84/0.1]-B[2-36/1]-P[5,​6,​8,​10,​12]-T[2-84/0.1]-S[2-45/1]-Q[5,​6,​8,​10,​12]
PSFRHM17-[30-890/0.1]-F[2-84/0.1]-B[2-36/1]-P[5,​6,​8,​10,​12]-T[2-84/0.1]-S[2-45/1]-QMC[6,​8,​10,​12,​15]
PSFRHM17-[30-890/0.1]-F[2-84/0.1]-B[2-36/1]-PMC[6,​8,​10,​12,​15]-T[2-84/0.1]-S[2-45/1]-Q[5,​6,​8,​10,​12]
PSFRHM17-[30-890/0.1]-F[2-84/0.1]-B[2-36/1]-PMC[6,​8,​10,​12,​15]-T[2-84/0.1]-S[2-45/1]-QMC[6,​8,​10,​12,​15]
PSFRHM20-[30-990/0.1]-F[2-112/0.1]-B[2-48/1]-P[6,​8,​10,​12,​16]-T[2-112/0.1]-S[2-48/1]-Q[6,​8,​10,​12,​16]
PSFRHM20-[30-990/0.1]-F[2-112/0.1]-B[2-48/1]-P[6,​8,​10,​12,​16]-T[2-112/0.1]-S[2-48/1]-QMC[6,​8,​10,​12,​15,​17]
PSFRHM20-[30-990/0.1]-F[2-112/0.1]-B[2-48/1]-PMC[6,​8,​10,​12,​15,​17]-T[2-112/0.1]-S[2-48/1]-Q[6,​8,​10,​12,​16]
PSFRHM20-[30-990/0.1]-F[2-112/0.1]-B[2-48/1]-PMC[6,​8,​10,​12,​15,​17]-T[2-112/0.1]-S[2-48/1]-QMC[6,​8,​10,​12,​15,​17]
PSFRHM25-[30-990/0.1]-F[3-140/0.1]-B[2-60/1]-P[8,​10,​12,​16,​20]-T[3-140/0.1]-S[2-60/1]-Q[8,​10,​12,​16,​20]
PSFRHM25-[30-990/0.1]-F[3-140/0.1]-B[2-60/1]-P[8,​10,​12,​16,​20]-T[3-140/0.1]-S[2-60/1]-QMC[8,​10,​12,​15,​17,​20]
PSFRHM25-[30-990/0.1]-F[3-140/0.1]-B[2-60/1]-PMC[8,​10,​12,​15,​17,​20]-T[3-140/0.1]-S[2-60/1]-Q[8,​10,​12,​16,​20]
PSFRHM25-[30-990/0.1]-F[3-140/0.1]-B[2-60/1]-PMC[8,​10,​12,​15,​17,​20]-T[3-140/0.1]-S[2-60/1]-QMC[8,​10,​12,​15,​17,​20]
PSFRHM30-[30-990/0.1]-F[3-168/0.1]-B[2-72/1]-P[8,​10,​12,​16,​20,​24]-T[3-168/0.1]-S[2-72/1]-Q[8,​10,​12,​16,​20,​24]
PSFRHM30-[30-990/0.1]-F[3-168/0.1]-B[2-72/1]-P[8,​10,​12,​16,​20,​24]-T[3-168/0.1]-S[2-72/1]-QMC[8,​10,​12,​15,​17,​20,​25]
PSFRHM30-[30-990/0.1]-F[3-168/0.1]-B[2-72/1]-PMC[8,​10,​12,​15,​17,​20,​25]-T[3-168/0.1]-S[2-72/1]-Q[8,​10,​12,​16,​20,​24]
PSFRHM30-[30-990/0.1]-F[3-168/0.1]-B[2-72/1]-PMC[8,​10,​12,​15,​17,​20,​25]-T[3-168/0.1]-S[2-72/1]-QMC[8,​10,​12,​15,​17,​20,​25]
PSFRHM35-[40-990/0.1]-F[3-210/0.1]-B[2-90/1]-P[10,​12,​16,​20,​24,​30]-T[3-210/0.1]-S[2-90/1]-Q[10,​12,​16,​20,​24,​30]
PSFRHM35-[40-990/0.1]-F[3-210/0.1]-B[2-90/1]-P[10,​12,​16,​20,​24,​30]-T[3-210/0.1]-S[2-90/1]-QMC[10,​12,​15,​17,​20,​25,​30]
PSFRHM35-[40-990/0.1]-F[3-210/0.1]-B[2-90/1]-PMC[10,​12,​15,​17,​20,​25,​30]-T[3-210/0.1]-S[2-90/1]-Q[10,​12,​16,​20,​24,​30]
PSFRHM35-[40-990/0.1]-F[3-210/0.1]-B[2-90/1]-PMC[10,​12,​15,​17,​20,​25,​30]-T[3-210/0.1]-S[2-90/1]-QMC[10,​12,​15,​17,​20,​25,​30]
PSFRHM40-[40-990/0.1]-F[5-210/0.1]-B[2-90/1]-P[12,​16,​20,​24,​30]-T[5-210/0.1]-S[2-90/1]-Q[12,​16,​20,​24,​30]
PSFRHM40-[40-990/0.1]-F[5-210/0.1]-B[2-90/1]-P[12,​16,​20,​24,​30]-T[5-210/0.1]-S[2-90/1]-QMC[12,​15,​17,​20,​25,​30]
PSFRHM40-[40-990/0.1]-F[5-210/0.1]-B[2-90/1]-PMC[12,​15,​17,​20,​25,​30]-T[5-210/0.1]-S[2-90/1]-Q[12,​16,​20,​24,​30]
PSFRHM40-[40-990/0.1]-F[5-210/0.1]-B[2-90/1]-PMC[12,​15,​17,​20,​25,​30]-T[5-210/0.1]-S[2-90/1]-QMC[12,​15,​17,​20,​25,​30]
PSFRHM50-[40-990/0.1]-F[5-210/0.1]-B[2-90/1]-P[16,​20,​24,​30]-T[5-210/0.1]-S[2-90/1]-Q[16,​20,​24,​30]
PSFRHM50-[40-990/0.1]-F[5-210/0.1]-B[2-90/1]-P[16,​20,​24,​30]-T[5-210/0.1]-S[2-90/1]-QMC[15,​17,​20,​25,​30]
PSFRHM50-[40-990/0.1]-F[5-210/0.1]-B[2-90/1]-PMC[15,​17,​20,​25,​30]-T[5-210/0.1]-S[2-90/1]-Q[16,​20,​24,​30]
PSFRHM50-[40-990/0.1]-F[5-210/0.1]-B[2-90/1]-PMC[15,​17,​20,​25,​30]-T[5-210/0.1]-S[2-90/1]-QMC[15,​17,​20,​25,​30]
PSFRHMS6-[20-290/0.1]-F[2-35/0.1]-B[2-15/1]-P[3,​4,​5]-T[2-35/0.1]-S[2-15/1]-Q[3,​4,​5]-SC[0-282/1]
PSFRHMS6-[20-290/0.1]-F[2-35/0.1]-B[2-15/1]-P[3,​4,​5]-T[2-35/0.1]-S[2-15/1]-QMC[3,​4,​5]-SC[0-282/1]
PSFRHMS6-[20-290/0.1]-F[2-35/0.1]-B[2-15/1]-PMC[3,​4,​5]-T[2-35/0.1]-S[2-15/1]-Q[3,​4,​5]-SC[0-282/1]
PSFRHMS6-[20-290/0.1]-F[2-35/0.1]-B[2-15/1]-PMC[3,​4,​5]-T[2-35/0.1]-S[2-15/1]-QMC[3,​4,​5]-SC[0-282/1]
PSFRHMS8-[20-390/0.1]-F[2-42/0.1]-B[2-18/1]-P[3,​4,​5,​6]-T[2-42/0.1]-S[2-18/1]-Q[3,​4,​5,​6]-SC[0-382/1]
PSFRHMS8-[20-390/0.1]-F[2-42/0.1]-B[2-18/1]-P[3,​4,​5,​6]-T[2-42/0.1]-S[2-18/1]-QMC[3,​4,​5,​6]-SC[0-382/1]
PSFRHMS8-[20-390/0.1]-F[2-42/0.1]-B[2-18/1]-PMC[3,​4,​5,​6]-T[2-42/0.1]-S[2-18/1]-Q[3,​4,​5,​6]-SC[0-382/1]
PSFRHMS8-[20-390/0.1]-F[2-42/0.1]-B[2-18/1]-PMC[3,​4,​5,​6]-T[2-42/0.1]-S[2-18/1]-QMC[3,​4,​5,​6]-SC[0-382/1]
PSFRHMS10-[20-490/0.1]-F[2-56/0.1]-B[2-24/1]-P[4,​5,​6,​8]-T[2-56/0.1]-S[2-25/1]-Q[4,​5,​6,​8]-SC[0-482/1]
PSFRHMS10-[20-490/0.1]-F[2-56/0.1]-B[2-24/1]-P[4,​5,​6,​8]-T[2-56/0.1]-S[2-25/1]-QMC[4,​5,​6,​8]-SC[0-482/1]
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSShaft Dia. D
(mm)
Material Heat Treatment Surface Finish Shaft Dia. Tolerance (Metric Only) Length L
(mm)
B
(mm)
Coarse Thread [P] (Stepped Dia.)
(mm)
Coarse Thread [Q] (Stepped Dia.)
(mm)
F
(mm)
Fine Thread [PMC] for P
(mm)
Fine Thread [QMC] for Q
(mm)
S
(mm)
T
(mm)
Wrench Flats Machining [SC]
(mm)
1 Piece(s)

9 Days or more

1015[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)25 ~ 6902 ~ 365 ~ 125 ~ 122 ~ 84--2 ~ 362 ~ 84-
1 Piece(s)

9 Days or more

1015[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)25 ~ 6902 ~ 365 ~ 12-2 ~ 84-5 ~ 122 ~ 362 ~ 84-
1 Piece(s)

9 Days or more

1015[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)25 ~ 6902 ~ 36-5 ~ 122 ~ 845 ~ 12-2 ~ 362 ~ 84-
1 Piece(s)

9 Days or more

1015[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)25 ~ 6902 ~ 36--2 ~ 845 ~ 125 ~ 122 ~ 362 ~ 84-
1 Piece(s)

9 Days or more

1020[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)30 ~ 7902 ~ 486 ~ 166 ~ 162 ~ 112--2 ~ 482 ~ 112-
1 Piece(s)

9 Days or more

1020[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)30 ~ 7902 ~ 486 ~ 16-2 ~ 112-6 ~ 172 ~ 482 ~ 112-
1 Piece(s)

9 Days or more

1020[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)30 ~ 7902 ~ 48-6 ~ 162 ~ 1126 ~ 17-2 ~ 482 ~ 112-
1 Piece(s)

9 Days or more

1020[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)30 ~ 7902 ~ 48--2 ~ 1126 ~ 176 ~ 172 ~ 482 ~ 112-
1 Piece(s)

9 Days or more

1025[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)30 ~ 7902 ~ 608 ~ 208 ~ 203 ~ 140--2 ~ 603 ~ 140-
1 Piece(s)

9 Days or more

1025[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)30 ~ 7902 ~ 608 ~ 20-3 ~ 140-8 ~ 202 ~ 603 ~ 140-
1 Piece(s)

9 Days or more

1025[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)30 ~ 7902 ~ 60-8 ~ 203 ~ 1408 ~ 20-2 ~ 603 ~ 140-
1 Piece(s)

9 Days or more

1025[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)30 ~ 7902 ~ 60--3 ~ 1408 ~ 208 ~ 202 ~ 603 ~ 140-
1 Piece(s)

9 Days or more

1030[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)30 ~ 7902 ~ 728 ~ 248 ~ 243 ~ 168--2 ~ 723 ~ 168-
1 Piece(s)

9 Days or more

1030[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)30 ~ 7902 ~ 728 ~ 24-3 ~ 168-8 ~ 252 ~ 723 ~ 168-
1 Piece(s)

9 Days or more

1030[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)30 ~ 7902 ~ 72-8 ~ 243 ~ 1688 ~ 25-2 ~ 723 ~ 168-
1 Piece(s)

9 Days or more

1030[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)30 ~ 7902 ~ 72--3 ~ 1688 ~ 258 ~ 252 ~ 723 ~ 168-
1 Piece(s)

9 Days or more

1035[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)40 ~ 7902 ~ 9010 ~ 3010 ~ 303 ~ 210--2 ~ 903 ~ 210-
1 Piece(s)

9 Days or more

1035[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)40 ~ 7902 ~ 9010 ~ 30-3 ~ 210-10 ~ 302 ~ 903 ~ 210-
1 Piece(s)

9 Days or more

1035[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)40 ~ 7902 ~ 90-10 ~ 303 ~ 21010 ~ 30-2 ~ 903 ~ 210-
1 Piece(s)

9 Days or more

1035[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)40 ~ 7902 ~ 90--3 ~ 21010 ~ 3010 ~ 302 ~ 903 ~ 210-
1 Piece(s)

9 Days or more

1040[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)40 ~ 7902 ~ 9012 ~ 3012 ~ 305 ~ 210--2 ~ 905 ~ 210-
1 Piece(s)

9 Days or more

1040[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)40 ~ 7902 ~ 9012 ~ 30-5 ~ 210-12 ~ 302 ~ 905 ~ 210-
1 Piece(s)

9 Days or more

1040[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)40 ~ 7902 ~ 90-12 ~ 305 ~ 21012 ~ 30-2 ~ 905 ~ 210-
1 Piece(s)

9 Days or more

1040[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)40 ~ 7902 ~ 90--5 ~ 21012 ~ 3012 ~ 302 ~ 905 ~ 210-
1 Piece(s)

9 Days or more

1050[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)40 ~ 7902 ~ 9016 ~ 3016 ~ 305 ~ 210--2 ~ 905 ~ 210-
1 Piece(s)

9 Days or more

1050[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)40 ~ 7902 ~ 9016 ~ 30-5 ~ 210-15 ~ 352 ~ 905 ~ 210-
1 Piece(s)

9 Days or more

1050[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)40 ~ 7902 ~ 90-16 ~ 305 ~ 21015 ~ 35-2 ~ 905 ~ 210-
1 Piece(s)

9 Days or more

1050[Steel] 4137 Alloy Steel or EquivalentHardenedBlack Oxideg6 (Ground)40 ~ 7902 ~ 90--5 ~ 21015 ~ 3515 ~ 352 ~ 905 ~ 210-
1 Piece(s)

9 Days or more

106[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 3902 ~ 153 ~ 53 ~ 52 ~ 35--2 ~ 152 ~ 35-
1 Piece(s)

9 Days or more

106[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 3902 ~ 153 ~ 5-2 ~ 35-3 ~ 52 ~ 152 ~ 35-
1 Piece(s)

9 Days or more

106[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 3902 ~ 15-3 ~ 52 ~ 353 ~ 5-2 ~ 152 ~ 35-
1 Piece(s)

9 Days or more

106[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 3902 ~ 15--2 ~ 353 ~ 53 ~ 52 ~ 152 ~ 35-
1 Piece(s)

9 Days or more

108[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 49003 ~ 63 ~ 62 ~ 42--2 ~ 182 ~ 42-
1 Piece(s)

9 Days or more

108[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 49003 ~ 6-2 ~ 42-3 ~ 62 ~ 182 ~ 42-
1 Piece(s)

9 Days or more

108[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 4900-3 ~ 62 ~ 423 ~ 6-2 ~ 182 ~ 42-
1 Piece(s)

9 Days or more

108[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 4900--2 ~ 423 ~ 63 ~ 62 ~ 182 ~ 42-
1 Piece(s)

9 Days or more

108[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 4903 ~ 183 ~ 63 ~ 62 ~ 42--2 ~ 182 ~ 42-
1 Piece(s)

9 Days or more

108[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 4903 ~ 183 ~ 6-2 ~ 42-3 ~ 62 ~ 182 ~ 42-
1 Piece(s)

9 Days or more

108[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 4903 ~ 18-3 ~ 62 ~ 423 ~ 6-2 ~ 182 ~ 42-
1 Piece(s)

9 Days or more

108[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 4903 ~ 18--2 ~ 423 ~ 63 ~ 62 ~ 182 ~ 42-
1 Piece(s)

9 Days or more

1010[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 5902 ~ 244 ~ 84 ~ 82 ~ 56--2 ~ 242 ~ 56-
1 Piece(s)

9 Days or more

1010[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 5902 ~ 244 ~ 8-2 ~ 56-4 ~ 82 ~ 242 ~ 56-
1 Piece(s)

9 Days or more

1010[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 5902 ~ 24-4 ~ 82 ~ 564 ~ 8-2 ~ 242 ~ 56-
1 Piece(s)

9 Days or more

1010[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 5902 ~ 24--2 ~ 564 ~ 84 ~ 82 ~ 242 ~ 56-
1 Piece(s)

9 Days or more

1012[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 6902 ~ 305 ~ 105 ~ 102 ~ 70--2 ~ 302 ~ 70-
1 Piece(s)

9 Days or more

1012[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 6902 ~ 305 ~ 10-2 ~ 70-5 ~ 102 ~ 302 ~ 70-
1 Piece(s)

9 Days or more

1012[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 6902 ~ 30-5 ~ 102 ~ 705 ~ 10-2 ~ 302 ~ 70-
1 Piece(s)

9 Days or more

1012[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 6902 ~ 30--2 ~ 705 ~ 105 ~ 102 ~ 302 ~ 70-
1 Piece(s)

9 Days or more

1015[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 7902 ~ 365 ~ 125 ~ 122 ~ 84--2 ~ 362 ~ 84-
1 Piece(s)

9 Days or more

1015[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 7902 ~ 365 ~ 12-2 ~ 84-5 ~ 122 ~ 362 ~ 84-
1 Piece(s)

9 Days or more

1015[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 7902 ~ 36-5 ~ 122 ~ 845 ~ 12-2 ~ 362 ~ 84-
1 Piece(s)

9 Days or more

1015[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)15 ~ 7902 ~ 36--2 ~ 845 ~ 125 ~ 122 ~ 362 ~ 84-
1 Piece(s)

9 Days or more

1017[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)30 ~ 8902 ~ 365 ~ 125 ~ 122 ~ 84--2 ~ 452 ~ 84-
1 Piece(s)

9 Days or more

1017[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)30 ~ 8902 ~ 365 ~ 12-2 ~ 84-6 ~ 152 ~ 452 ~ 84-
1 Piece(s)

9 Days or more

1017[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)30 ~ 8902 ~ 36-5 ~ 122 ~ 846 ~ 15-2 ~ 452 ~ 84-
1 Piece(s)

9 Days or more

1017[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)30 ~ 8902 ~ 36--2 ~ 846 ~ 156 ~ 152 ~ 452 ~ 84-
1 Piece(s)

9 Days or more

1020[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)30 ~ 9902 ~ 486 ~ 166 ~ 162 ~ 112--2 ~ 482 ~ 112-
1 Piece(s)

9 Days or more

1020[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)30 ~ 9902 ~ 486 ~ 16-2 ~ 112-6 ~ 172 ~ 482 ~ 112-
1 Piece(s)

9 Days or more

1020[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)30 ~ 9902 ~ 48-6 ~ 162 ~ 1126 ~ 17-2 ~ 482 ~ 112-
1 Piece(s)

9 Days or more

1020[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)30 ~ 9902 ~ 48--2 ~ 1126 ~ 176 ~ 172 ~ 482 ~ 112-
1 Piece(s)

9 Days or more

1025[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)30 ~ 9902 ~ 608 ~ 208 ~ 203 ~ 140--2 ~ 603 ~ 140-
1 Piece(s)

9 Days or more

1025[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)30 ~ 9902 ~ 608 ~ 20-3 ~ 140-8 ~ 202 ~ 603 ~ 140-
1 Piece(s)

9 Days or more

1025[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)30 ~ 9902 ~ 60-8 ~ 203 ~ 1408 ~ 20-2 ~ 603 ~ 140-
1 Piece(s)

9 Days or more

1025[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)30 ~ 9902 ~ 60--3 ~ 1408 ~ 208 ~ 202 ~ 603 ~ 140-
1 Piece(s)

9 Days or more

1030[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)30 ~ 9902 ~ 728 ~ 248 ~ 243 ~ 168--2 ~ 723 ~ 168-
1 Piece(s)

9 Days or more

1030[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)30 ~ 9902 ~ 728 ~ 24-3 ~ 168-8 ~ 252 ~ 723 ~ 168-
1 Piece(s)

9 Days or more

1030[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)30 ~ 9902 ~ 72-8 ~ 243 ~ 1688 ~ 25-2 ~ 723 ~ 168-
1 Piece(s)

9 Days or more

1030[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)30 ~ 9902 ~ 72--3 ~ 1688 ~ 258 ~ 252 ~ 723 ~ 168-
1 Piece(s)

9 Days or more

1035[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)40 ~ 9902 ~ 9010 ~ 3010 ~ 303 ~ 210--2 ~ 903 ~ 210-
1 Piece(s)

9 Days or more

1035[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)40 ~ 9902 ~ 9010 ~ 30-3 ~ 210-10 ~ 302 ~ 903 ~ 210-
1 Piece(s)

9 Days or more

1035[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)40 ~ 9902 ~ 90-10 ~ 303 ~ 21010 ~ 30-2 ~ 903 ~ 210-
1 Piece(s)

9 Days or more

1035[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)40 ~ 9902 ~ 90--3 ~ 21010 ~ 3010 ~ 302 ~ 903 ~ 210-
1 Piece(s)

9 Days or more

1040[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)40 ~ 9902 ~ 9012 ~ 3012 ~ 305 ~ 210--2 ~ 905 ~ 210-
1 Piece(s)

9 Days or more

1040[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)40 ~ 9902 ~ 9012 ~ 30-5 ~ 210-12 ~ 302 ~ 905 ~ 210-
1 Piece(s)

9 Days or more

1040[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)40 ~ 9902 ~ 90-12 ~ 305 ~ 21012 ~ 30-2 ~ 905 ~ 210-
1 Piece(s)

9 Days or more

1040[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)40 ~ 9902 ~ 90--5 ~ 21012 ~ 3012 ~ 302 ~ 905 ~ 210-
1 Piece(s)

9 Days or more

1050[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)40 ~ 9902 ~ 9016 ~ 3016 ~ 305 ~ 210--2 ~ 905 ~ 210-
1 Piece(s)

9 Days or more

1050[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)40 ~ 9902 ~ 9016 ~ 30-5 ~ 210-15 ~ 302 ~ 905 ~ 210-
1 Piece(s)

9 Days or more

1050[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)40 ~ 9902 ~ 90-16 ~ 305 ~ 21015 ~ 30-2 ~ 905 ~ 210-
1 Piece(s)

9 Days or more

1050[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)40 ~ 9902 ~ 90--5 ~ 21015 ~ 3015 ~ 302 ~ 905 ~ 210-
1 Piece(s)

9 Days or more

106[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)20 ~ 2902 ~ 153 ~ 53 ~ 52 ~ 35--2 ~ 152 ~ 350 ~ 282
1 Piece(s)

9 Days or more

106[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)20 ~ 2902 ~ 153 ~ 5-2 ~ 35-3 ~ 52 ~ 152 ~ 350 ~ 282
1 Piece(s)

9 Days or more

106[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)20 ~ 2902 ~ 15-3 ~ 52 ~ 353 ~ 5-2 ~ 152 ~ 350 ~ 282
1 Piece(s)

9 Days or more

106[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)20 ~ 2902 ~ 15--2 ~ 353 ~ 53 ~ 52 ~ 152 ~ 350 ~ 282
1 Piece(s)

9 Days or more

108[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)20 ~ 3902 ~ 183 ~ 63 ~ 62 ~ 42--2 ~ 182 ~ 420 ~ 382
1 Piece(s)

9 Days or more

108[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)20 ~ 3902 ~ 183 ~ 6-2 ~ 42-3 ~ 62 ~ 182 ~ 420 ~ 382
1 Piece(s)

9 Days or more

108[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)20 ~ 3902 ~ 18-3 ~ 62 ~ 423 ~ 6-2 ~ 182 ~ 420 ~ 382
1 Piece(s)

9 Days or more

108[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)20 ~ 3902 ~ 18--2 ~ 423 ~ 63 ~ 62 ~ 182 ~ 420 ~ 382
1 Piece(s)

9 Days or more

1010[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)20 ~ 4902 ~ 244 ~ 84 ~ 82 ~ 56--2 ~ 252 ~ 560 ~ 482
1 Piece(s)

9 Days or more

1010[Steel] 1045 Carbon Steel or EquivalentNot HardenedElectroless Nickelh7 (Ground)20 ~ 4902 ~ 244 ~ 8-2 ~ 56-4 ~ 82 ~ 252 ~ 560 ~ 482

Loading...

More Information

Select from h9 (Cold-drawn), h7 (Ground) and g6 (Ground) for your applications.

Example

Rotary Shafts - Both Ends Stepped and Threaded:Related Image

Rotary Shafts Thread Undercut (PC/QC) Dimensions (Reference)

When Thread undercut machining (PC/QC) is specified, PC/QC dimension is as shown in the table below.

As for the PC and QC Dimensions for the Fine Thread alteration (PMC/QMC), also refer to the tables below.

Coarse Thread
P(=M)
Q(=N)
PC
QC
32.4
43.2
54.1
64.4
76.0
107.7
129.4
1613.0
2016.4
2419.6
3025.0
Combined with Fine Thread Alteration
PMC
QMC
PC
QC
32.4
43.2
54.1
64.8
86.4
108.4
1210.4
1513.4
1715.4
2018.4
2522.7
3027.7

Detailed Retaining Ring Groove Dimensions Rotary & Driving Shafts

Shaft Diameterd ToleranceSlot Width (m) ToleranceApplicable Retaining Ring
21.2+0.06
0
0.4+0.05
0
JIS E Type 1.2
2.51.50.5JIS E Type 1.5
32JIS E Type 2
430.7+0.1
0
JIS E Type 3
54+0.075
0
JIS E Type 4
65JIS E Type 5
760.9JIS E Type 6
87+0.09
0
JIS E Type 7
98JIS E Type 8
109.60/-0.091.15+0.14
0
JIS C Type 10
1110.50
-0.11
JIS C Type 11
1211.5JIS C Type 12
1312.4JIS C Type 13
1413.4JIS C Type 14
1514.3JIS C Type 15
1615.2JIS C Type 16
1716.2JIS C Type 17
18171.35JIS C Type 18
1918JIS C Type 19

[ ! ]An applicable retaining ring is attached.

Shaft Diameterd ToleranceSlot Width (m) ToleranceApplicable Retaining Ring
20190
-0.21
1.35+0.14
0
JIS C Type 20
2120JIS C Type 21
2221JIS C Type 22
2322JIS C Type 23
2422.9JIS C Type 24
2523.9JIS C Type 25
2624.9JIS C Type 26
2826.61.65JIS C Type 28
2927.6JIS C Type 29
3028.6JIS C Type 30
3230.30
-0.25
JIS C Type 32
3533JIS C Type 35
40381.9JIS C Type 40
4542.5JIS C Type 45
50472.2JIS C Type 50

Support Information

Basis of Fitting Selection/Dimensional Tolerances & Fitting

Difference between Shatf and Rotary Shaft

Comparison of specifications between linear shafts and shafts for rotary shafts

Basic Specifications
SpecificationsRotary ShaftsLinear Shafts
Material1045 Carbon Steel or Equivalent 304 Stainless Steel4137 Alloy Steel or Equivalent52100 Bearing Steel Equivalent SUS440C(13Cr) Stainless Steel Equivalent1045 Carbon Steel Equivalent or 304 Stainless Steel
Quenching/Hardness-Hardness 30-35HRCHigh-frequency quenching-
Outer Diameter Toleranceh9/h7g6g6/h5f8
Surface TreatmentNo plating
Black Oxide
Electroless Nickel Plating
Black Oxide
Electroless Nickel Plating
No Plating
Hard Chrome Plating
Low Temp. Black Chrome Plating
Electroless Nickel Plating (Only Surface Treatment Fully Plated Type)
Hard Chrome Plating
Alterations
AlterationsRotary ShaftsLinear Shafts
L Dimension ToleranceL<500: L±0.05
L≧500: L±0.1
L≧800: NOT applicable
L<200: L±0.03
200≦L<500: L±0.05
L≧500: L±0.1
Flat Key GroovesUp to 1 location specifiedUp to 2 locations specified
Set Screw FlatUp to 3 locations specifiedUp to 2 locations specified
2 Set Screw FlatUp to 1 location specified
Angle Specification: 15 Deg. Inc
Up to 2 locations specified
Angle Specification: Fixed
V-groove-Up to 2 locations specified
KeywayUp to 4 locations specified
Specified on step: Applicable
Up to 2 locations specified
Specified on step: NOT applicable
Change to Fine Threads1 type2 type
Change to Fine Threads Tap-1 type
UndercutM3~M30M6~M30
Tapped DepthApplicableApplicable
Retainning Ring GrooveUp to 2 locations on D and 1 locationon each step
*Can be chosen together
Up to 2 locations specified
(Only Retaining Ring type applicable)
Slit Cam GrooveUp to 1 location specified-
ConcentricityApplicable-
Left Hand ThreadApplicable-
SlitUp to 1 location specified-
C Chamfering WidthApplicable-

*Click here for information of Rotary Shaft Alteration Guide or Shaft Alteration Guide

 

Basic Information

Basic Shape Both Ends Stepped End Shape (Left) Threaded End Shape (Right) Threaded
Keyway Keyway Option (Alteration)
  • The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

MISUMI Unit Example related to this product

Tech Support