(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Medium Load Linear Guides - Standard/Wide short block. (SVWTB24)
- Volume Discount
Linear guide for medium load with shorter blocks to save space. Precision standard grade, with light preload. It has resin retainers without mutual contact between its bearings, which reduce noise during operation at high speeds and provide a smoother movement. Blocks and rails can be purchased separately or in an assembly.
- inCAD Components
[ ! ]For L Dimension Configurable Type, G dimensions differ from those shown in the table below. For details, see >> Click here.
・Materials
Heat Resistant Temperature: 0~50°C
| Type | Block | Rail | L Dimension | [ M ]Material [ H ]Hardness | ||
| 1 block | 2 blocks | |||||
| Standard | SVRZ | SV2RZ | SVRB | SRZL | Selectable | Carbon Steel 58HRC~ |
| SVRLZ | SV2RLZ | SRZLF | Configurable | |||
| Wide Block Through Hole | SVWZ | SV2WZ | SVWB | SRZL | Selectable | |
| SVWLZ | SV2WLZ | SRZLF | Configurable | |||
| Wide Block Tapped Hole | SVWTZ | SV2WTZ | SVWTB | SRZL | Selectable | |
| SVWTLZ | SV2WTLZ | SRZLF | Configurable | |||
Part Number
Configured Part Number is shown.
SVWTB24
Specifications
[ ! ]For L Dimension Configurable Type, G dimensions differ from those shown in the table below. For details, see >> Click here.
| Part Number | L | Block Dimension | Guide Rail Dimension | |||||||||||||||||
| Type | H | W | L1 | B | Sxℓ | L2 | K | T | Grease Fitting | H1 | W1 | W2 | Counterbored Hole | F | G | |||||
| 1 block | 2 blocks | Mounting Hole | E | T1 | d1xd2xh | |||||||||||||||
| Standard | SVRZ SVRLZ | SV2RZ SV2RLZ | 24 | 100~1480 (160) | 34 | 40.4 | 26 | M4x6 | 23.6 | 19 | 10 | Ø3 | 3 | 6 | 12.5 | 15 | 9.5 | 3.5x6x4.5 | 60 | 20 |
| (Block) SVRB | (Rail) SRZL SRZLF | 28 | 160~1960 (220) | 42 | 47.2 | 32 | M5x7 | 30 | 22 | 12 | M6xP0.75 | 11 | 5.5 | 15.5 | 20 | 11 | 6x9.5x8.5 | 60 | 20 | |
| 33 | 160~1960 (220) | 48 | 59.6 | 35 | M6x9 | 38 | 26 | 12 | M6xP0.75 | 11 | 7 | 18 | 23 | 12.5 | 7x11x9 | 60 | 20 | |||
| 42 | 200~1960 (280) | 60 | 67.4 | 40 | M8x12 | 42 | 33 | 13 | M6xP0.75 | 11 | 8 | 23 | 28 | 16 | 7x11x9 | 80 | 20 | |||
| Wide Block | SVWZ SVWLZ SVWTZ SVWTLZ (Block) SVWB SVWTB | SV2WZ SV2WLZ SV2WTZ SV2WTLZ (Rail) SRZL SRZLF | 24 | 100~1480 (160) | 52 | 40.4 | 41 | 4.5 | 23.6 | 19 | 8 | Ø3 | 3 | 6 | 12.5 | 15 | 18.5 | 3.5x6x4.5 | 60 | 20 |
| (M5) | ||||||||||||||||||||
| 28 | 160~1960 (220) | 59 | 47.2 | 49 | 5.5 | 30 | 22 | 10 | M6xP0.75 | 11 | 5.5 | 15.5 | 20 | 19.5 | 6x9.5x8.5 | 60 | 20 | |||
| (M6) | ||||||||||||||||||||
| 33 | 160~1960 (220) | 73 | 59.6 | 60 | 7 | 38 | 26 | 11 | M6xP0.75 | 11 | 7 | 18 | 23 | 25 | 7x11x9 | 60 | 20 | |||
| (M8) | ||||||||||||||||||||
| 42 | 200~1960 (280) | 90 | 67.4 | 72 | 9 | 42 | 33 | 11 | M6xP0.75 | 11 | 8 | 23 | 28 | 31 | 7x11x9 | 80 | 20 | |||
| (M10) | ||||||||||||||||||||
[ ! ]Sxℓ Dimensions: Dimensions in ( ) are for Wide Block Type Tapped Hole.
Materials
| Type | Block | Rail | L Dimension | [ M ]Material [ H ]Hardness | ||
| 1 block | 2 blocks | |||||
| Standard | SVRZ | SV2RZ | SVRB | SRZL | Selectable | Carbon Steel 58HRC~ |
| SVRLZ | SV2RLZ | SRZLF | Configurable | |||
| Wide Block Through Hole | SVWZ | SV2WZ | SVWB | SRZL | Selectable | |
| SVWLZ | SV2WLZ | SRZLF | Configurable | |||
| Wide Block Tapped Hole | SVWTZ | SV2WTZ | SVWTB | SRZL | Selectable | |
| SVWTLZ | SV2WTLZ | SRZLF | Configurable | |||
| Part Number | - | L |
| SVRZ28 | - | 820 |
■Precautions for Use
[ ! ]Blocks are equipped with retainers (wire) to prevent balls from derailing. For blocks >> Click here
[ ! ]For Interchangeable, Light Preload Type, rails and blocks can be interchanged.
[ ! ]Straight grooves are provided on datum planes. Be sure to match the datum lines when using.
[ ! ]Rails cannot be connected end to end.
[ ! ]Running parallelism is the value measured after the rail is mounted (it is not the value
measured before the rails are fastened with screws.).
■Others
· Filled with Lithium soap based grease (Alvania Grease S2 by Showa Shell Sekiyu K.K).
· Grease Fittings: Straight Type for H24 and Angled Type for H28, H33 and H42.
· Grease Fitting is screw-in type, and thus, can be repositioned.
· For Operating Life Calculation >>Click here.
[ ! ]Blocks are equipped with retainers (wire) to prevent balls from derailing. For blocks >> Click here
[ ! ]For Interchangeable, Light Preload Type, rails and blocks can be interchanged.
[ ! ]Straight grooves are provided on datum planes. Be sure to match the datum lines when using.
[ ! ]Rails cannot be connected end to end.
[ ! ]Running parallelism is the value measured after the rail is mounted (it is not the value
measured before the rails are fastened with screws.).
■Others
· Filled with Lithium soap based grease (Alvania Grease S2 by Showa Shell Sekiyu K.K).
· Grease Fittings: Straight Type for H24 and Angled Type for H28, H33 and H42.
· Grease Fitting is screw-in type, and thus, can be repositioned.
· For Operating Life Calculation >>Click here.
Interchangeable, Light Preload Type
| Radial Clearance (µm) | |
| H24, 28 | -4~0 |
| H33, 42 | -5~0 |
| Dimensional Accuracy (µm) | Interchangeable |
| Height H Tolerance | ±20 |
| Pair Variation of Height H | 15 |
| Width W2 Tolerance | ±30 |
| Pair Variation of Width W2 | 25 |
| Running Parallelism of Plane C against Plane A | See Click here |
| Running Parallelism of Plane D against Plane B |
More Information
Linear Guide Clamps >> Click here
Rail Height Adjusting Blocks >> Click here, Click here
■Stopper Bolts >> Click here
■Block Stopper Plates >> Click here
■Rail Mounting Hole Caps >> Click here
■Rail Push Plates >> Click here
■Linear Locks >> Click here
■Linear Guide Lock Units >> Click here
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| SVWTB24 |
Loading...
Alterations
Basic Information
| Material | Carbon Steel | Preload | Light Preload-Interchangeable |
|---|
Please check the type/dimensions/specifications of the part SVWTB24 in the Medium Load Linear Guides - Standard/Wide short block. series.
Specification/Dimensions
-
Rail Type
-
Standard
-
-
Rail Width W1(mm)
-
No. of Blocks
- 1
- 2
-
Rail Length L(mm)
- 100
- 160
- 200
- 220
- 280
- 340
- 360
- 400
- 440
- 460
- 520
- 580
- 600
- 640
- 680
- 700
- 760
- 820
- 840
- 880
- 920
- 940
- 1000
- 1060
- 1080
- 1120
- 1160
- 1180
- 1240
- 1300
- 1320
- 1360
- 1400
- 1420
- 1480
- 1540
- 1560
- 1600
- 1640
- 1660
- 1720
- 1780
- 1800
- 1840
- 1880
- 1900
- 1960
-
L Dimension Type
- Configurable Type
- Standard Type
-
type
- SRZL
- SRZLF
- SV2RLZ
- SV2RZ
- SV2WTLZ
- SV2WTZ
- SVRB
- SVRLZ
- SVRZ
- SVWTB
- SVWTLZ
- SVWTZ
-
Set / Single Item
- Set
- Block Only
- Rail Only
-
Block Type
- Short
- Wide
- Short
-
Unit Height H(mm)
-
Nominal Part Number
-
Ball Arrangement
- Medium, Heavy Load Type with Plastic Retainers
-
Retainer
- Available
-
Lubrication Type
- Lithium Base Grease (Standard)
-
Block Hole Type
- Tapped
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 10 Days or Less
- 12 Days or Less
- 52 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked questions (FAQ)
- 質問: Are the block's ball bearings retained?
- 回答: Yes, all ball bearings are retained on Misumi linear guides.
Products like this...
| Part Number |
|---|
| SVRB24 |
Additional Products in this Category
- Ultra Heavy Load Linear Guides - Standard/Wide block.
- Miniature Linear Guides - Short block.
- Linear Guides - For heavy load.
- Linear Guides - For medium load.
- LM Guides - Miniature, SRS model assembly.
- LM Guides - Rail only, model SHS.
- LM Guides - Block Only, SR Model.
- Linear Guides - Rail only, 400 series, Thomson brand.
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy