(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Joints For Cooling Water -Plugs-
- Volume Discount
•Material: Brass
•Connecting Part: Female thread
•Includes Valve: No valve
•Shape: Straight
Part Number
Configured Part Number is shown.
Brass C3604(C36000)(CU-ZN)Thread JIS B 0203 tapered thread for tubing R(PT)
Matching Sockets:
Click here
The hexagonal wrench socket is penetrated. Brass C3604(C36000)(CU-ZN)Thread JIS B 0203 tapered thread for tubing R(PT)
Matching Sockets:
Click herePart Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| JPJ1 |
| JPJ2 |
| JPJ3 |
| JPJH1 |
| JPJH2 |
Loading...
Specifications
| Matching Sockets | To be connected to a socket | L | D1 | Allen side B | Allen wrench hole d | Tapered thread R(PT) | ℓ1 | Part Number | ||
| V | ℓ | Type | No. | |||||||
| Cooling Joint Series Socket hole diameter V=9.4 | 9.4 | 10.4 | 22.4 | 13 | - | 5 | 1/8 | 9 | JPJ(Brass) | 1 |
| 24.4 | 14 | 1/4 | 11 | 2 | ||||||
| 13.4 | 32.4 | 13 | 19 | 3/8 | 12 | 3 | ||||
| Matching Sockets | To be connected to a socket | L | D1 | Allen side B | Allen wrench holed | Tapered thread R(PT) | ℓ1 | Part Number | ||
| V | ℓ | Type | No. | |||||||
| Cooling Joint Series Socket hole diameter V=9.4 | 9.4 | 10.4 | 24.4 | (13.5) | 12 | 5 | 1/8 | 9 | JPJH(Brass) | 1 |
| 26.4 | (15.5) | 14 | 1/4 | 11 | 2 | |||||
Matching Joint Plug Connections Click here These plugs are applicable to slim design sockets. Click hereUse in normal pressure 980kPa (10kgf/cm2) or lower Guide for Socket/Plug Click hereExample
| Cooling plug (Standard type) | Attachment Hole | ||||||||||
| Part Number | Tapered male thread R (PT) | Full length L | Thread length ℓ1 | x1 | x2 (reference value) | C | Counterbore depth F (reference value) | Z (Counterbore hole diameter) | Tapered female thread Rc (PT) | ||
| When using hexagonal wrench | When using socket wrench | ||||||||||
| Type | No. | ||||||||||
| JPJH | 1 | 1/8 | 24.4 | 9 | 15.4 | 2~4 | less than 2mm | 15.4+X2 | 18~ | 20~ | 1/8 |
| 2 | 1/4 | 26.4 | 11 | 15.4 | 2~4 | 15.4+X2 | 18~ | 23~ | 1/4 | ||
| JPJ | 1 | 1/8 | 22.4 | 9 | 13.4 | 2~4 | 13.4+X2 | 18~ | - | 1/8 | |
| 2 | 1/4 | 24.2 | 11 | 13.4 | 2~4 | 13.4+X2 | 18~ | - | 1/4 | ||
| 3 | 3/8 | 32.4 | 12 | 17.4 | 3~5 | 17.4+X2 | 22~ | (29~) | 3/8 | ||
Please note that C dimension is less than 2mm when combining with 
socket.Note:
1. Setting C dimension over 2mm will cause the socket to bump on the mold and make attaching/detaching impossible.
2.X2 (Reference values) Appropriate dimensions vary depending on the hole diameter aswell as the tap's depth and finishing level.
3. Dimensions of JPJ shown in ( ) indicate the diameter of a counterbore for using a JIS B 4636 socket wrench.
Basic Information
| Material | Brass | Connecting parts | Female thread | With/without valve | No valve |
|---|---|---|---|---|---|
| Shape | Straight |
Stock
-
- Stock Item Only
Specification/Dimensions
-
Spanner installation section
- No
- Yes
-
R/(PT)(Nominal)
- 1/4
- 1/8
- 3/8
-
d/d1 (Inner diameter)(mm)
-
L (Length)(mm)
-
type
- JPJ
- JPJH
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 8 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- High Couplers For Cooling Pipe -Plugs/L-Shaped Swivel Type-
- High Couplers For Cooling Pipe -Plugs/Long Type-
- Valveless TSP Couplers For Cooling -Plugs-
- Joints For Cooling Water -Plugs/Long Type-
- Mold Coupler Plugs
- High Couplers For Cooling Pipe - Plugs
- Joints for Cooling Water (MISUMI)
- Valveless TSP Couplers For Cooling Pipe -Stainless Steel Plugs-
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy