(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 p.m. 11/23/2024 to 5:00 p.m. (CST) 11/24/2024. We apologize for the inconvenience.
Quill Shoulder Punches - RW Coating (Part Numbers)
Click this image to zoom it.
Move the mouse over the image to zoom
•Heavy-load punches : No
•Shank type : Single-stepped
•Jector : None
•Tip shape : Double flatted round, Oblong, Radius rectangle, Rectangle, Round
•Material : SKH40 Equivalent (Powdered high-speed steel), SKH51 Equivalent (M2), SKH51 Equivalent (M2)
For complete product overview and details on Shoulder Punches Quill Type·RW Coating see the sections below:
Part Number
Configured Part Number is shown.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| ARW-PHAL1.6-[30,35,40,50,60]-P[1-1.59/0.01] |
| ARW-PHAL1.6-LC[30-59.9/0.1]-P[1-1.59/0.01] |
| ARW-PHAL1.6-LCT[30-59.9/0.1]-P[1-1.59/0.01] |
| ARW-PHAL1.6-LMT[30-59.9/0.1]-P[1-1.59/0.01] |
| ARW-PHAL2.0-[30,35,40,50,60]-P[1-1.99/0.01] |
| ARW-PHAL2.0-LC[30-59.9/0.1]-P[1-1.99/0.01] |
| ARW-PHAL2.0-LCT[30-59.9/0.1]-P[1-1.99/0.01] |
| ARW-PHAL2.0-LMT[30-59.9/0.1]-P[1-1.99/0.01] |
| ARW-PHAL2.5-[30,35,40,50,60]-P[1-2.49/0.01] |
| ARW-PHAL2.5-LC[30-59.9/0.1]-P[1-2.49/0.01] |
| ARW-PHAL2.5-LCT[30-59.9/0.1]-P[1-2.49/0.01] |
| ARW-PHAL2.5-LMT[30-59.9/0.1]-P[1-2.49/0.01] |
| ARW-PHAS1.6-[20,25,30,35,40,50,60]-P[1-1.59/0.01] |
| ARW-PHAS1.6-LC[20-59.9/0.1]-P[1-1.59/0.01] |
| ARW-PHAS1.6-LCT[20-59.9/0.1]-P[1-1.59/0.01] |
| ARW-PHAS1.6-LMT[20-59.9/0.1]-P[1-1.59/0.01] |
| ARW-PHAS2.0-[20,25,30,35,40,50,60]-P[1-1.99/0.01] |
| ARW-PHAS2.0-LC[20-59.9/0.1]-P[1-1.99/0.01] |
| ARW-PHAS2.0-LCT[20-59.9/0.1]-P[1-1.99/0.01] |
| ARW-PHAS2.0-LMT[20-59.9/0.1]-P[1-1.99/0.01] |
| ARW-PHAS2.5-[20,25,30,35,40,50,60]-P[1-2.49/0.01] |
| ARW-PHAS2.5-LC[20-59.9/0.1]-P[1-2.49/0.01] |
| ARW-PHAS2.5-LCT[20-59.9/0.1]-P[1-2.49/0.01] |
| ARW-PHAS2.5-LMT[20-59.9/0.1]-P[1-2.49/0.01] |
| ARW-PHDL2.0-[30,35,40,50,60]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHDL2.0-LC[30-59.9/0.1]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHDL2.0-LCT[30-59.9/0.1]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHDL2.0-LMT[30-59.9/0.1]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHDL2.5-[30,35,40,50,60]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHDL2.5-LC[30-59.9/0.1]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHDL2.5-LCT[30-59.9/0.1]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHDL2.5-LMT[30-59.9/0.1]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHDS2.0-[20,25,30,35,40,50,60]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHDS2.0-LC[20-59.9/0.1]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHDS2.0-LCT[20-59.9/0.1]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHDS2.0-LMT[20-59.9/0.1]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHDS2.5-[20,25,30,35,40,50,60]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHDS2.5-LC[20-59.9/0.1]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHDS2.5-LCT[20-59.9/0.1]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHDS2.5-LMT[20-59.9/0.1]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHEL2.0-[30,35,40,50,60]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHEL2.0-LC[30-59.9/0.1]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHEL2.0-LCT[30-59.9/0.1]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHEL2.0-LMT[30-59.9/0.1]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHEL2.5-[30,35,40,50,60]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHEL2.5-LC[30-59.9/0.1]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHEL2.5-LCT[30-59.9/0.1]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHEL2.5-LMT[30-59.9/0.1]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHES2.0-[20,25,30,35,40,50,60]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHES2.0-LC[20-59.9/0.1]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHES2.0-LCT[20-59.9/0.1]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHES2.0-LMT[20-59.9/0.1]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHES2.5-[20,25,30,35,40,50,60]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHES2.5-LC[20-59.9/0.1]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHES2.5-LCT[20-59.9/0.1]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHES2.5-LMT[20-59.9/0.1]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHGL2.0-[30,35,40,50,60]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHGL2.0-LC[30-59.9/0.1]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHGL2.0-LCT[30-59.9/0.1]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHGL2.0-LMT[30-59.9/0.1]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHGL2.5-[30,35,40,50,60]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHGL2.5-LC[30-59.9/0.1]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHGL2.5-LCT[30-59.9/0.1]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHGL2.5-LMT[30-59.9/0.1]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHGS2.0-[20,25,30,35,40,50,60]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHGS2.0-LC[20-59.9/0.1]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHGS2.0-LCT[20-59.9/0.1]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHGS2.0-LMT[20-59.9/0.1]-P[1-1.97/0.01]-W[1-1.97/0.01] |
| ARW-PHGS2.5-[20,25,30,35,40,50,60]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHGS2.5-LC[20-59.9/0.1]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHGS2.5-LCT[20-59.9/0.1]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHGS2.5-LMT[20-59.9/0.1]-P[1-2.47/0.01]-W[1-2.47/0.01] |
| ARW-PHLTAL1.6-[30,35,40,50,60]-P[1-1.59/0.01] |
| ARW-PHLTAL1.6-LC[30.1-59.9/0.1]-P[1-1.59/0.01] |
| ARW-PHLTAL1.6-LCT[30.1-59.9/0.1]-P[1-1.59/0.01] |
| ARW-PHLTAL1.6-LMT[30.1-59.9/0.1]-P[1-1.59/0.01] |
| ARW-PHLTAL2.0-[30,35,40,50,60]-P[1-1.99/0.01] |
| ARW-PHLTAL2.0-LC[30.1-59.9/0.1]-P[1-1.99/0.01] |
| ARW-PHLTAL2.0-LCT[30.1-59.9/0.1]-P[1-1.99/0.01] |
| ARW-PHLTAL2.0-LMT[30.1-59.9/0.1]-P[1-1.99/0.01] |
| ARW-PHLTAL2.5-[30,35,40,50,60]-P[1-2.49/0.01] |
| ARW-PHLTAL2.5-LC[30.1-59.9/0.1]-P[1-2.49/0.01] |
| ARW-PHLTAL2.5-LCT[30.1-59.9/0.1]-P[1-2.49/0.01] |
| ARW-PHLTAL2.5-LMT[30.1-59.9/0.1]-P[1-2.49/0.01] |
| ARW-PHLTAS1.6-[20,25,30,35,40,50,60]-P[1-1.59/0.01] |
| ARW-PHLTAS1.6-LC[20.1-59.9/0.1]-P[1-1.59/0.01] |
| ARW-PHLTAS1.6-LCT[20.1-59.9/0.1]-P[1-1.59/0.01] |
| ARW-PHLTAS1.6-LMT[20.1-59.9/0.1]-P[1-1.59/0.01] |
| ARW-PHLTAS2.0-[20,25,30,35,40,50,60]-P[1-1.99/0.01] |
| ARW-PHLTAS2.0-LC[20.1-59.9/0.1]-P[1-1.99/0.01] |
Loading...
Basic Information
| Heavy-load punches | No | Shank type | Single-stepped | Jector | None |
|---|---|---|---|---|---|
| Surface treatment | RW coating | Shank (mounting part) shape | Standard |
Specification/Dimensions
-
Tip shape
- Round
- Rectangle
- Radius rectangle
- Oblong
- Double flatted round
-
Material
- SKH51 Equivalent (M2)
- SKH40 Equivalent (Powdered high-speed steel)
-
Shank diameter D tolerance
- +0.005/0
- m5
-
B (Tip length)
- L
- S
-
D (Shank diameter)(mm)
-
P (Tip dimension)(mm)
-
L (L dimension)(mm)
-
T (Head thickness/plate thickness)(mm)
- 3
- 5
-
LC (Full length alteration)(mm)
-
LCT (Head thickness tolerance change + total length alteration)(mm)
-
LMT (Head thickness tolerance change + total length alteration)(mm)
-
R (Tip corner R)(mm)
-
W (Tip dimension)(mm)
-
type
- ARW-PHAL
- ARW-PHAS
- ARW-PHDL
- ARW-PHDS
- ARW-PHEL
- ARW-PHES
- ARW-PHGL
- ARW-PHGS
- ARW-PHLTAL
- ARW-PHLTAS
- ARW-PHLTDL
- ARW-PHLTDS
- ARW-PHLTEL
- ARW-PHLTES
- ARW-PHLTGL
- ARW-PHLTGS
- ARW-PHLTRL
- ARW-PHLTRS
- ARW-PHRL
- ARW-PHRS
- ARW-SHAL
- ARW-SHAS
- ARW-SHDL
- ARW-SHDS
- ARW-SHEL
- ARW-SHEL2.5
- ARW-SHES
- ARW-SHGL
- ARW-SHGS
- ARW-SHLTAL
- ARW-SHLTAS
- ARW-SHLTDL
- ARW-SHLTDS
- ARW-SHLTEL
- ARW-SHLTES
- ARW-SHLTGL
- ARW-SHLTGS
- ARW-SHLTRL
- ARW-SHLTRS
- ARW-SHRL
- ARW-SHRS
- RW-PHAL
- RW-PHAS
- RW-PHDL
- RW-PHDS
- RW-PHEL
- RW-PHES
- RW-PHGL
- RW-PHGS
- RW-PHLTAL
- RW-PHLTAS
- RW-PHLTDL
- RW-PHLTDS
- RW-PHLTEL
- RW-PHLTES
- RW-PHLTGL
- RW-PHLTGS
- RW-PHLTRL
- RW-PHLTRS
- RW-PHRL
- RW-PHRS
- RW-SHAL
- RW-SHAS
- RW-SHDL
- RW-SHDS
- RW-SHEL
- RW-SHES
- RW-SHGL
- RW-SHGS
- RW-SHLTAL
- RW-SHLTAS
- RW-SHLTDL
- RW-SHLTDS
- RW-SHLTEL
- RW-SHLTES
- RW-SHLTGL
- RW-SHLTGS
- RW-SHLTRL
- RW-SHLTRS
- RW-SHRL
- RW-SHRS
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 11 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Shoulder Punches Lapping
- Ejector Punches - Dicoat® Treatment
- Ejector Punches - Lapping
- Quill Shoulder Punches - Multiple Coating Options
- Shoulder Punches - Key Flat Shank, HW Coating or WPC® Treatment
- Key Flat Shank, Tapped Punches - TiCN Coating Option
- Double-Stepped, Tapped Punches - TiCN Coating
- Shoulder Punches - Double-Stepped, HW Coating
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy