(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Roller Bearings（Number of Raceway Ring Rows：Single Track）
| Days to Ship |
|
|---|
-
- On Sale Till 15/12/2024
Tapered Roller Bearing - Single Row
NTN
Tapered roller bearings utilize conical rollers and raceways, arranged so that the rollers and raceways meet at a common apex. The rollers are guided by contact between the large end of the roller and a rib on the inner ring. This provides high capacity for radial and single thrust loads.
NTN’s pioneering efforts in developing crowned rollers have resulted in greater load-carrying capability and longer bearing life. Crowned rollers under load distribute stress equally along their full length of contact with the raceways, thereby eliminating stress concentration at the roller ends. This design concept also compensates for minor misalignment between shaft and housing bore and deflection under load, thereby reducing stress concentration.- Volume Discount
Special Price Days to Ship: Same day or more Show Stock Products
-
Cylindrical Roller Bearing - Single or Double Row
NSK
Cylindrical roller bearings are suitable for applications involving high-speed rotation because the friction between the rolling elements and the flange of the track wheel is small.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
Tapered Roller Bearing - Single or Double Row
NSK
Cylindrical roller bearings are suitable for applications involving high-speed rotation because the friction between the rolling elements and the flange of the track wheel is small.
- Volume Discount
Special Price Days to Ship: Same day or more Show Stock Products
-
Needle Roller Bearing - Shell Type, TA Series
IKO
IKO Machined Type Needle Roller Bearings have an outer ring made by machining, heat treatment, and grinding. The outer ring has stable high rigidity and can be easily used even for light alloy housings.
These bearings are available in metric series and inch series, both of which have the caged type and the full complement type. It is therefore possible to select a suitable bearing for use under various conditions such as heavy loads and high-speed or low-speed rotations. In addition, there are bearings with and without an inner ring. As the type without inner ring uses a shaft as the raceway surface, a compact design is possible.- Volume Discount
Days to Ship: 5 Days or more -
Cylindrical Roller Bearing - N Series
NTN
•Load Direction: Radial
•Raceway Ring Shape: Cylindrical Roller
•Inner/Outer Ring Material: Steel
•Rolling Element Material: Steel
•Combination Of Two Piece: Standard- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
Needle Roller Bearing - Shell Type, F Series
NSK
•Specification: Standard
•Outer Ring: With Outer Ring
•Load Direction: Radial
•Precision Ji: Class 0
•Raceway Ring Shape: Needle Roller- Volume Discount
Special Price Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
Needle Roller Bearing - Shell Type
NTN
•Specification: Standard
•Outer Ring: With Outer Ring
•Raceway Ring Shape: Needle Roller
•Inner/Outer Ring Material: Steel
•Rolling Element Material: Steel- Volume Discount
Special Price Days to Ship: Same day or more Show Stock Products
-
Needle Roller Bearing - With Inner Ring, Machined, NA48 Series
IKO
IKO Machined Type Needle Roller Bearings are bearings with a low sectional height and large load ratings. The outer ring has high rigidity and can easily be used even for light alloy housings. These bearings are available in metric series and inch series, both of which have the caged type and the full complement type. It is therefore possible to select a suitable bearing for use under various conditions such as heavy loads and high-speed or low-speed rotations. In addition, there are bearings with and without an inner ring. As the type without inner ring uses a shaft as the raceway surface, a compact design is possible.
- Volume Discount
Days to Ship: 8 Days or more -
Crossed Roller Bearing - Sealed, Caged, CRBC Series
IKO
IKO Machined Type Needle Roller Bearings have an outer ring made by machining, heat treatment, and grinding. The outer ring has stable high rigidity and can be easily used even for light alloy housings.
These bearings are available in metric series and inch series, both of which have the caged type and the full complement type. It is therefore possible to select a suitable bearing for use under various conditions such as heavy loads and high-speed or low-speed rotations. In addition, there are bearings with and without an inner ring. As the type without inner ring uses a shaft as the raceway surface, a compact design is possible.- Volume Discount
Days to Ship: 8 Days -
IKO - Shell Type Needle Roller Bearing - Standard - TLA Type (IKO)
IKO
Shell Type Needle Roller Bearings are lightweight bearings with large load ratings. They employ a shell type outer ring made from a thin special-steel plate which is accurately drawn, carburized and quenched, thus providing the lowest sectional height among the needle roller bearings.
There are two types of bearings available in this series; the caged type and the full complement type. The appropriate type can be selected according to the operating conditions. The caged type has a structure in which the needle rollers are accurately guided by the cage and thrust rings. It is useful for applications at high-speed rotation. The full complement type needle roller bearing, on the other hand, is suitable for heavy-load applications at low-speed rotation.
Since these bearings are press-fitted into the housing, no fixtures for axial positioning are needed. They are ideal for use in mass-produced articles that require economy and have a wide variety of applications.- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days -
Needle Roller Bearing - Separable Cage, Inner Ring, NAF Series
IKO
In this series, IKO needle roller bearings are combined with thrust roller bearings to receive thrust loads. Their axial load ratings are greater than those of bearings that are combined with thrust ball bearings. Also, plastic deformation of the rolling contact surfaces under load is minimal. Furthermore, the thrust bearing section is finished to high accuracy, and therefore high rotational accuracy is obtained in the case of both vertical and horizontal shafts.
Like the needle roller bearings with thrust ball bearing, this series also includes bearings with a dust cover and bearings with an inner ring.- Volume Discount
Days to Ship: 4 Days or more -
Needle Roller Bearing - Without Inner Ring, Machined, TAF Series
IKO
IKO Machined Type Needle Roller Bearings are bearings with a low sectional height and large load ratings. The outer ring has high rigidity and can easily be used even for light alloy housings. These bearings are available in metric series and inch series, both of which have the caged type and the full complement type. It is therefore possible to select a suitable bearing for use under various conditions such as heavy loads and high-speed or low-speed rotations. In addition, there are bearings with and without an inner ring. As the type without inner ring uses a shaft as the raceway surface, a compact design is possible.
- Volume Discount
Days to Ship: 7 Days or more -
Needle Roller Bearing - With Inner Ring, Machined, NA69 Series
IKO
IKO Machined Type Needle Roller Bearings are bearings with a low sectional height and large load ratings. The outer ring has high rigidity and can easily be used even for light alloy housings. These bearings are available in metric series and inch series, both of which have the caged type and the full complement type. It is therefore possible to select a suitable bearing for use under various conditions such as heavy loads and high-speed or low-speed rotations. In addition, there are bearings with and without an inner ring. As the type without inner ring uses a shaft as the raceway surface, a compact design is possible.
- Volume Discount
Days to Ship: 8 Days or more -
Thrust Needle Roller Bearing - 2 mm Width, Single Row
MISUMI
•Specification: Standard
•Standard Size: Metric Series
•Width Dimension B (mm): 2
•Outer Ring: With Outer Ring
•Load Direction: Thrust- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
Combination Needle Roller/Thrust Ball Bearing - With Inner Ring
MISUMI
NKXZ12 is out of stock and potentially not available for 6 months or more.
- Volume Discount
- inCAD Components
Special Price Days to Ship: Same day or more Show Stock Products
-
Crossed Roller Bearing - High Rigidity, Mounting Hole, CRBF Series
IKO
IKO Crossed Roller Bearigns are compact bearigns with their rollers alternatively crossed at right angles to each other between inner and outer rings. The rollres make line-contact with raceway surfaces, and, therefore, elastic deformation due to bearing loads is very small. They can take loads from any directions at the same time such as radial, thrust and moment loads. It is possible to make your design compact comparing to the usage of taper roller bearing and combination of two ball bearings. These bearrings are widely used in the rotating parts of industrial robots, machine tools, medical equipment, etc., which require compactness, high rigidity and high rotational accuracy.
- Volume Discount
Days to Ship: 8 Days or more -
IKO - Needle Roller Bearings With Separable Cage With Inner Ring - NAF Series (IKO)
IKO
In Needle Roller Bearings with Separable Cage, the inner ring, outer ring and Needle Roller Cage are combined, and they can be separated easily. This type has a simple structure with high accuracy. In addition, the radial clearance can be freely chosen by selecting and combining these component parts. As Needle Roller Cages are used, these bearings have excellent rotational performance. These bearings are most suitable for mass-production high accuracy products such as machine tools, textile machinery, and printing machines.
When especially high accuracy is required, it is possible to supply semi-finished inner rings which have a finishing allowance on their outside diameter so that they can be ground after being press-fitted to shafts.- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Needle Roller Bearing - Without Inner Ring, Machined, RNA49 Series
IKO
IKO Machined Type Needle Roller Bearings are bearings with a low sectional height and large load ratings. The outer ring has high rigidity and can easily be used even for light alloy housings. These bearings are available in metric series and inch series, both of which have the caged type and the full complement type. It is therefore possible to select a suitable bearing for use under various conditions such as heavy loads and high-speed or low-speed rotations. In addition, there are bearings with and without an inner ring. As the type without inner ring uses a shaft as the raceway surface, a compact design is possible.
- Volume Discount
Days to Ship: 8 Days or more -
Needle Roller Bearing - With Inner Ring, Machined, NA49 Series
IKO
IKO Machined Type Needle Roller Bearings are bearings with a low sectional height and large load ratings. The outer ring has high rigidity and can easily be used even for light alloy housings. These bearings are available in metric series and inch series, both of which have the caged type and the full complement type. It is therefore possible to select a suitable bearing for use under various conditions such as heavy loads and high-speed or low-speed rotations. In addition, there are bearings with and without an inner ring. As the type without inner ring uses a shaft as the raceway surface, a compact design is possible.
- Volume Discount
Days to Ship: 8 Days or more -
- On Sale Till 15/12/2024
NTN
•Specification: Standard
•Standard Size: Metric Series
•Load Direction: Thrust
•Precision Ji: Class 0
•Number Of Raceway Ring Rows: Single Track- Volume Discount
Special Price Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
NTN
•Specification: Standard
•Outer Ring: With Outer Ring
•Load Direction: Radial
•Raceway Ring Shape: Needle Roller
•Inner/Outer Ring Material: Steel- Volume Discount
Special Price Days to Ship: Same day or more Show Stock Products
-
Slim Crossed Roller Bearing - Open, Caged, CRBS Series
IKO
IKO Machined Type Needle Roller Bearings have an outer ring made by machining, heat treatment, and grinding. The outer ring has stable high rigidity and can be easily used even for light alloy housings.
These bearings are available in metric series and inch series, both of which have the caged type and the full complement type. It is therefore possible to select a suitable bearing for use under various conditions such as heavy loads and high-speed or low-speed rotations. In addition, there are bearings with and without an inner ring. As the type without inner ring uses a shaft as the raceway surface, a compact design is possible.- Volume Discount
Days to Ship: 8 Days or more -
Needle Roller Bearing - Without Inner Ring, Inch Measurements, Machined, BR Series
IKO
IKO Machined Type Needle Roller Bearings are bearings with a low sectional height and large load ratings. The outer ring has high rigidity and can easily be used even for light alloy housings. These bearings are available in metric series and inch series, both of which have the caged type and the full complement type. It is therefore possible to select a suitable bearing for use under various conditions such as heavy loads and high-speed or low-speed rotations. In addition, there are bearings with and without an inner ring. As the type without inner ring uses a shaft as the raceway surface, a compact design is possible.
- Volume Discount
Days to Ship: 11 Days or more -
Thrust Cylindrical Roller Bearing - Single Row
NTN
•Specification: Standard
•Standard Size: Metric Series
•Load Direction: Thrust
•Raceway Ring Shape: Cylindrical Roller
•Number Of Raceway Ring Rows: Single Track- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Crossed Roller Bearing - Open, Caged, CRBC Series
IKO
IKO Machined Type Needle Roller Bearings have an outer ring made by machining, heat treatment, and grinding. The outer ring has stable high rigidity and can be easily used even for light alloy housings.
These bearings are available in metric series and inch series, both of which have the caged type and the full complement type. It is therefore possible to select a suitable bearing for use under various conditions such as heavy loads and high-speed or low-speed rotations. In addition, there are bearings with and without an inner ring. As the type without inner ring uses a shaft as the raceway surface, a compact design is possible.- Volume Discount
Days to Ship: 8 Days -
Needle Roller Bearing - Sealed Both Sides, With Inner Ring, Machined, NA49 Series
IKO
IKO Machined Type Needle Roller Bearings are bearings with a low sectional height and large load ratings. The outer ring has high rigidity and can easily be used even for light alloy housings. These bearings are available in metric series and inch series, both of which have the caged type and the full complement type. It is therefore possible to select a suitable bearing for use under various conditions such as heavy loads and high-speed or low-speed rotations. In addition, there are bearings with and without an inner ring. As the type without inner ring uses a shaft as the raceway surface, a compact design is possible.
- Volume Discount
Days to Ship: 8 Days or more -
NTN
•Specification: Standard
•Standard Size: Metric Series
•Outer Ring: No Outer Ring
•Load Direction: Radial
•Precision Ji: Class 0- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Thrust Cylindrical Roller Bearing - GS-Shaped Outer Ring, Single Row
NTN
•Specification: Standard
•Standard Size: Metric Series
•Load Direction: Radial
•Raceway Ring Shape: Cylindrical Roller
•Number Of Raceway Ring Rows: Single Track- Volume Discount
Days to Ship: 8 Days or more -
IKO - Needle Roller Bearings With Separable Cage Without Inner Ring - RNAFW Series (IKO)
IKO
In Needle Roller Bearings with Separable Cage, the inner ring, outer ring and Needle Roller Cage are combined, and they can be separated easily. This type has a simple structure with high accuracy. In addition, the radial clearance can be freely chosen by selecting and combining these component parts. As Needle Roller Cages are used, these bearings have excellent rotational performance. These bearings are most suitable for mass-production high accuracy products such as machine tools, textile machinery, and printing machines.
The single-row as well as the double-row types are available with the same sectional height, and either of them can be selected according to load conditions.- Volume Discount
- CAD ：
- 2D
Days to Ship: 51 Days -
Needle Roller Bearing - Separable Cage, Without Inner Ring, RNAF Series
IKO
In this series, IKO needle roller bearings are combined with thrust roller bearings to receive thrust loads. Their axial load ratings are greater than those of bearings that are combined with thrust ball bearings. Also, plastic deformation of the rolling contact surfaces under load is minimal. Furthermore, the thrust bearing section is finished to high accuracy, and therefore high rotational accuracy is obtained in the case of both vertical and horizontal shafts.
Like the needle roller bearings with thrust ball bearing, this series also includes bearings with a dust cover and bearings with an inner ring.- Volume Discount
Days to Ship: 8 Days or more -
Needle Roller Bearing - Without Inner Ring, Machined, TR Series
IKO
IKO Machined Type Needle Roller Bearings are bearings with a low sectional height and large load ratings. The outer ring has high rigidity and can easily be used even for light alloy housings. These bearings are available in metric series and inch series, both of which have the caged type and the full complement type. It is therefore possible to select a suitable bearing for use under various conditions such as heavy loads and high-speed or low-speed rotations. In addition, there are bearings with and without an inner ring. As the type without inner ring uses a shaft as the raceway surface, a compact design is possible.
- Volume Discount
Days to Ship: 8 Days or more -
Needle Roller Bearing - Without Inner Ring, Machined, RNA48 Series
IKO
IKO Machined Type Needle Roller Bearings are bearings with a low sectional height and large load ratings. The outer ring has high rigidity and can easily be used even for light alloy housings. These bearings are available in metric series and inch series, both of which have the caged type and the full complement type. It is therefore possible to select a suitable bearing for use under various conditions such as heavy loads and high-speed or low-speed rotations. In addition, there are bearings with and without an inner ring. As the type without inner ring uses a shaft as the raceway surface, a compact design is possible.
- Volume Discount
Days to Ship: 8 Days or more -
Needle Roller Bearing - Without Inner Ring, Machined, GTR Series
IKO
IKO Machined Type Needle Roller Bearings are bearings with a low sectional height and large load ratings. The outer ring has high rigidity and can easily be used even for light alloy housings. These bearings are available in metric series and inch series, both of which have the caged type and the full complement type. It is therefore possible to select a suitable bearing for use under various conditions such as heavy loads and high-speed or low-speed rotations. In addition, there are bearings with and without an inner ring. As the type without inner ring uses a shaft as the raceway surface, a compact design is possible.
- Volume Discount
Days to Ship: 8 Days or more -
Needle Roller Bearing - Sealed Both Sides, Without Inner Ring, Machined, RNA49 Series
IKO
IKO Machined Type Needle Roller Bearings are bearings with a low sectional height and large load ratings. The outer ring has high rigidity and can easily be used even for light alloy housings. These bearings are available in metric series and inch series, both of which have the caged type and the full complement type. It is therefore possible to select a suitable bearing for use under various conditions such as heavy loads and high-speed or low-speed rotations. In addition, there are bearings with and without an inner ring. As the type without inner ring uses a shaft as the raceway surface, a compact design is possible.
- Volume Discount
Days to Ship: 8 Days or more -
Needle Roller Bearing - With Inner Ring, Machined, TAFI Series
IKO
IKO Machined Type Needle Roller Bearings are bearings with a low sectional height and large load ratings. The outer ring has high rigidity and can easily be used even for light alloy housings. These bearings are available in metric series and inch series, both of which have the caged type and the full complement type. It is therefore possible to select a suitable bearing for use under various conditions such as heavy loads and high-speed or low-speed rotations. In addition, there are bearings with and without an inner ring. As the type without inner ring uses a shaft as the raceway surface, a compact design is possible.
- Volume Discount
Days to Ship: 5 Days or more -
Combination Needle Roller/Thrust Roller Bearing - With Inner Ring
MISUMI
•Specification: Standard
•Standard Size: Metric Series
•Outer Ring: With Outer Ring
•Precision Ji: Class 0
•Raceway Ring Shape: Needle Roller Bearings with Thrust Roller Bearings- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Thrust Self-Aligning Roller Bearing
NTN
•Specification: Standard
•Standard Size: Metric Series
•Outer Ring: With Outer Ring
•Load Direction: Thrust
•Precision Ji: Class 0- Volume Discount
Days to Ship: 11 Days or more -
INA (Schaeffler)
Needle roller bearings have a long track record as proven machine elements for the design of radially compact bearing arrangements with very high load-carrying capacity.
- Volume Discount
Days to Ship: Quote -
NTN
•Specification: Standard
•Standard Size: Metric Series
•Load Direction: Thrust
•Raceway Ring Shape: Cylindrical Roller
•Number Of Raceway Ring Rows: Single Track- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Crossed Roller Bearing - Sealed, Full Complement, CRB Series
IKO
IKO Machined Type Needle Roller Bearings have an outer ring made by machining, heat treatment, and grinding. The outer ring has stable high rigidity and can be easily used even for light alloy housings.
These bearings are available in metric series and inch series, both of which have the caged type and the full complement type. It is therefore possible to select a suitable bearing for use under various conditions such as heavy loads and high-speed or low-speed rotations. In addition, there are bearings with and without an inner ring. As the type without inner ring uses a shaft as the raceway surface, a compact design is possible.- Volume Discount
Days to Ship: 8 Days or more -
Crossed Roller Bearing - Open, Caged, CRB Series
IKO
IKO Machined Type Needle Roller Bearings have an outer ring made by machining, heat treatment, and grinding. The outer ring has stable high rigidity and can be easily used even for light alloy housings.
These bearings are available in metric series and inch series, both of which have the caged type and the full complement type. It is therefore possible to select a suitable bearing for use under various conditions such as heavy loads and high-speed or low-speed rotations. In addition, there are bearings with and without an inner ring. As the type without inner ring uses a shaft as the raceway surface, a compact design is possible.- Volume Discount
Days to Ship: 8 Days or more -
Needle Roller Bearing - Without Inner Ring, Machined, RNA69 Series
IKO
IKO Machined Type Needle Roller Bearings are bearings with a low sectional height and large load ratings. The outer ring has high rigidity and can easily be used even for light alloy housings. These bearings are available in metric series and inch series, both of which have the caged type and the full complement type. It is therefore possible to select a suitable bearing for use under various conditions such as heavy loads and high-speed or low-speed rotations. In addition, there are bearings with and without an inner ring. As the type without inner ring uses a shaft as the raceway surface, a compact design is possible.
- Volume Discount
Days to Ship: 8 Days or more -
Slim Crossed Roller Bearing - Sealed, Separator, CRBS Series
IKO
IKO Crossed Roller Bearigns are compact bearigns with their rollers alternatively crossed at right angles to each other between inner and outer rings. The rollres make line-contact with raceway surfaces, and, therefore, elastic deformation due to bearing loads is very small. They can take loads from any directions at the same time such as radial, thrust and moment loads. It is possible to make your design compact comparing to the usage of taper roller bearing and combination of two ball bearings. These bearrings are widely used in the rotating parts of industrial robots, machine tools, medical equipment, etc., which require compactness, high rigidity and high rotational accuracy.
- Volume Discount
Days to Ship: 8 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Raceway Ring Shape |
| Load Direction |
| I.D. d(Ø) |
| O.D. D(Ø) |
| Width B(mm) |
| Inner/Outer Ring Material |
| Outer Ring |
| Precision (JIS) |
| Number of Raceway Ring Rows |
| Size Standards |
| Specifications |
| Rolling Element Material |
| Outer Ring Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NTN | NSK | NSK | IKO | NTN | NSK | NTN | IKO | IKO | IKO | IKO | IKO | IKO | MISUMI | MISUMI | IKO | IKO | IKO | IKO | NTN | NTN | IKO | IKO | NTN | IKO | IKO | NTN | NTN | IKO | IKO | IKO | IKO | IKO | IKO | IKO | MISUMI | NTN | INA (Schaeffler) | NTN | IKO | IKO | IKO | IKO |
| Product Series | Needle Roller Bearing - With Inner Ring, Machined, NA48 Series | IKO - Shell Type Needle Roller Bearing - Standard - TLA Type (IKO) | Needle Roller Bearing - Separable Cage, Inner Ring, NAF Series | Needle Roller Bearing - Without Inner Ring, Machined, TAF Series | Needle Roller Bearing - With Inner Ring, Machined, NA69 Series | Combination Needle Roller/Thrust Ball Bearing - With Inner Ring | Crossed Roller Bearing - High Rigidity, Mounting Hole, CRBF Series | IKO - Needle Roller Bearings With Separable Cage With Inner Ring - NAF Series (IKO) | Needle Roller Bearing - Without Inner Ring, Machined, RNA49 Series | Needle Roller Bearing - With Inner Ring, Machined, NA49 Series | Needle Roller Bearing - Without Inner Ring, Inch Measurements, Machined, BR Series | Needle Roller Bearing - Sealed Both Sides, With Inner Ring, Machined, NA49 Series | Thrust Cylindrical Roller Bearing - GS-Shaped Outer Ring, Single Row | IKO - Needle Roller Bearings With Separable Cage Without Inner Ring - RNAFW Series (IKO) | Needle Roller Bearing - Separable Cage, Without Inner Ring, RNAF Series | Needle Roller Bearing - Without Inner Ring, Machined, TR Series | Needle Roller Bearing - Without Inner Ring, Machined, RNA48 Series | Needle Roller Bearing - Without Inner Ring, Machined, GTR Series | Needle Roller Bearing - Sealed Both Sides, Without Inner Ring, Machined, RNA49 Series | Needle Roller Bearing - With Inner Ring, Machined, TAFI Series | Combination Needle Roller/Thrust Roller Bearing - With Inner Ring | Crossed Roller Bearing - Sealed, Full Complement, CRB Series | Needle Roller Bearing - Without Inner Ring, Machined, RNA69 Series | Slim Crossed Roller Bearing - Sealed, Separator, CRBS Series | |||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||
| Days to Ship |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 5 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days | 8 Days | 4 Days or more | 7 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 11 Days or more |
Same day or more
Show Stock Products | 8 Days | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 51 Days | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 5 Days or more | 8 Days or more | 11 Days or more | Quote |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days |
| Specifications |
|
|
| ||||||||||||||||||||||||||||||||||||||||
| Raceway Ring Shape | Cone Roller | Cylindrical Roller | Cylindrical Roller / Cone Roller | Needle Roller | Cylindrical Roller | Needle Roller / One-way Clutch | Needle Roller | Needle Roller | Cylindrical Roller | Needle Roller | Needle Roller | Needle Roller | Needle Roller | Needle Roller | Complex Shape Roller | - | Needle Roller | Needle Roller | Needle Roller | Cylindrical Roller / Needle Roller | Needle Roller | Cylindrical Roller | Needle Roller | Cylindrical Roller | Cylindrical Roller | Needle Roller | Needle Roller | Cylindrical Roller | Needle Roller | Needle Roller | Needle Roller | Needle Roller | - | Needle Roller | Needle Roller | Complex Shape Roller | Self-Aligning Roller | Complex Shape Roller | Cylindrical Roller | Cylindrical Roller | Cylindrical Roller | Needle Roller | Cylindrical Roller |
| Load Direction | Radial / Thrust | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Thrust | Radial / Thrust | Radial / Thrust | Radial | Radial | Radial | Thrust | - | Radial / Thrust | Radial | Thrust | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial / Thrust | Thrust | Radial / Thrust | Thrust | Radial | Radial | Radial | Radial |
| I.D. d(Ø) | 15 ～ 260 | 8 ～ 340 | 15 ～ 380 | 4 ～ 70 | 20 ～ 280 | 4 ～ 45 | 3 ～ 50 | 110 ～ 260 | 80 | 5 | 9 ～ 80 | 5 ～ 110 | 12 ～ 22 | 4 ～ 30 | 7 ～ 50 | 10 ～ 115 | 7 ～ 90 | 5 ～ 290 | 5 ～ 260 | 10 ～ 162 | 5 ～ 330 | 50 ～ 190 | 31.75 ～ 50.8 | 15 ～ 160 | 30 ～ 110 | 10 ～ 140 | 3 ～ 165 | 30 ～ 140 | 8 | 5 ～ 100 | 20 ～ 140 | 120 ～ 285 | 25 ～ 140 | 14 ～ 160 | 5 ～ 100 | 12 ～ 45 | 70 ～ 380 | 15 ～ 60 | - | 30 ～ 150 | 70 ～ 150 | 16 ～ 35 | 50 |
| O.D. D(Ø) | 35 ～ 400 | 14 ～ 520 | 35 ～ 520 | 8 ～ 82 | 47 ～ 420 | 8 ～ 55 | 6.5 ～ 62 | 140 ～ 320 | 120 | 9 | 22 ～ 110 | 10 ～ 130 | 24 ～ 39 | 14 ～ 47 | 19 ～ 72 | 52 ～ 240 | 20 ～ 120 | 11 ～ 360 | 13 ～ 360 | 24 ～ 200 | 10 ～ 380 | 66 ～ 226 | 44.45 ～ 65.088 | 28 ～ 200 | 55 ～ 160 | 22 ～ 190 | 6 ～ 173 | 52 ～ 200 | 16 | 10 ～ 120 | 33 ～ 178 | 140 ～ 320 | 38 ～ 178 | 22 ～ 190 | 15 ～ 130 | 24 ～ 62 | 150 ～ 520 | 28 ～ 90 | - | 55 ～ 230 | 65 ～ 230 | 24 ～ 47 | 66 |
| Width B(mm) | 11.75 ～ 87 | 12 ～ 122 | 11.75 ～ 127 | 8 ～ 40 | 12 ～ 120 | 6 ～ 20 | 6 ～ 31 | 30 ～ 60 | - | 9 | 12 ～ 30 | 10 ～ 40 | 22 ～ 30 | 2 | 16 ～ 25 | 8 ～ 28 | 12 ～ 30 | 10 ～ 100 | 10 ～ 100 | 1 ～ 31 | 8 ～ 100 | 8 ～ 13 | 31.75 | 3.5 ～ 15 | 10 ～ 20 | 14 ～ 51 | 7 ～ 34 | 4.25 ～ 13.5 | 20 | 8 ～ 30 | 20 ～ 60 | 30 ～ 60 | 20 ～ 60 | 13 ～ 50 | 12 ～ 40 | 16 ～ 25 | 39 ～ 115 | 20 ～ 38 | 2 ～ 3 | 10 ～ 30 | 10 ～ 30 | 22 ～ 30 | 8 |
| Inner/Outer Ring Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Outer Ring | - | With Outer Ring | With Outer Ring | With Outer Ring | - | With Outer Ring | With Outer Ring | With Outer Ring | - | With Outer Ring | With Outer Ring | With Outer Ring | With Outer Ring | With Outer Ring | With Outer Ring | - | With Outer Ring | With Outer Ring | With Outer Ring | With Outer Ring / No Outer Ring | With Outer Ring | With Outer Ring | With Outer Ring | - | - | With Outer Ring | No Outer Ring | - | With Outer Ring | With Outer Ring | With Outer Ring | With Outer Ring | With Outer Ring | With Outer Ring | With Outer Ring | With Outer Ring | With Outer Ring | With Outer Ring | - | - | - | With Outer Ring | - |
| Precision (JIS) | Class 4 / Class 5 | Class 0 | Class 0 | - | Class 0 / Class 5 | Class 0 | - | - | - | - | - | - | - | Class 0 | Class 0 | Class 0 | - | - | - | Class 0 | Class 0 / Class 4 | - | - | - | - | - | Class 0 | - | - | - | - | - | - | - | - | Class 0 | Class 0 | Class 0 | - | - | - | - | - |
| Number of Raceway Ring Rows | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track |
| Size Standards | Metric Series / Inch Series | Metric Series | Metric Series | Metric Series | - | Metric Series / Inch Series | Metric Series / Inch Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series / Inch Series | Metric Series | Inch Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series |
| Specifications | Standard | Standard | Standard | Standard / Abrasion Resistance / For High Speed | Standard / For High Speed | Standard | Standard | Standard / Abrasion Resistance / For High Speed | Standard | Standard / Abrasion Resistance / For High Speed | Standard / Abrasion Resistance / For High Speed | Standard / Abrasion Resistance / For High Speed | Standard / Abrasion Resistance / For High Speed | Standard | Standard | - | Standard / Abrasion Resistance / For High Speed | Standard / Abrasion Resistance / For High Speed | Standard / Abrasion Resistance / For High Speed | Standard | Standard | Standard / Abrasion Resistance / For High Speed | Standard / Abrasion Resistance / For High Speed | Standard | Standard | Standard / Abrasion Resistance / For High Speed | Standard | Standard | Standard / Abrasion Resistance / For High Speed | Standard / Abrasion Resistance / For High Speed | Standard / Abrasion Resistance / For High Speed | Standard / Abrasion Resistance / For High Speed | Standard / Abrasion Resistance / For High Speed | Standard / Abrasion Resistance / For High Speed | Standard / Abrasion Resistance / For High Speed | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Abrasion Resistance / For High Speed | Standard |
| Rolling Element Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Outer Ring Type | Flat | Flat | Flat | Flat | - | Flat | Flat | With Semicircular Groove | - | Flat | Flat | With Semicircular Groove | With Semicircular Groove | Flat | Flat | Flat | Flat | With Semicircular Groove | With Semicircular Groove | Flat | Flat | Flat | With Semicircular Groove | Flat | - | With Semicircular Groove | - | Flat | With Semicircular Groove | Flat / With Semicircular Groove | With Semicircular Groove | With Semicircular Groove | With Semicircular Groove | With Semicircular Groove | With Semicircular Groove | Flat | Flat | With Semicircular Groove | - | - | - | With Semicircular Groove | - |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Raceway Ring Shape
- Cylindrical Roller
- Needle Roller
- Cone Roller
- Self-Aligning Roller
- Complex Shape Roller
- One-way Clutch
-
Load Direction
- Radial
- Thrust
-
Metric / Inch
- metric
-
I.D. d(Ø)
- 3
- 4
- 4.4 inch
- 5
- 5 inch
- 6
- 6 inch
- 6.63 inch
- 6.88 inch
- 7
- 7 inch
- 8
- 8 inch
- 9
- 9 inch
- 9.25 inch
- 10
- 10 inch
- 11 inch
- 12
- 12.700(1/2)
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 19.05
- 20
- 21
- 21.43
- 21.986
- 22
- 24
- 25
- 26
- 28
- 29
- 30
- 31.75
- 32
- 34.925
- 34.925(1 3/8)
- 35
- 37
- 38
- 38.1
- 40
- 41.275
- 42
- 43
- 45
- 47
- 47.625
- 48
- 50
- 50.8
- 52
- 55
- 57
- 58
- 60
- 62
- 63
- 65
- 67
- 68
- 70
- 72
- 73
- 75
- 77
- 80
- 82
- 83
- 85
- 87
- 90
- 92
- 93
- 95
- 100
- 102
- 105
- 110
- 112
- 115
- 120
- 122
- 125
- 130
- 132
- 135
- 140
- 145
- 150
- 155
- 160
- 162
- 165
- 170
- 175
- 180
- 185
- 190
- 195
- 200
- 205
- 210
- 215
- 220
- 225
- 240
- 245
- 250
- 260
- 265
- 280
- 285
- 290
- 300
- 320
- 330
- 340
- 360
- 380
-
O.D. D(Ø)
- 6
- 6.5
- 7
- 8
- 8.8 inch
- 9
- 10
- 10.5 inch
- 11
- 12
- 12 inch
- 12.5 inch
- 13
- 14
- 14.26 inch
- 14.5 inch
- 15
- 16
- 16.5 inch
- 17
- 17.462(11/16)
- 18
- 19
- 19 inch
- 20
- 21
- 21.25 inch
- 21.5 inch
- 22
- 23
- 23.75 inch
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 44.45
- 45
- 45.237
- 45.974
- 47
- 47.625(1 7/8)
- 48
- 49
- 50
- 50.005
- 51
- 52
- 52.388
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 61.912
- 62
- 63
- 64
- 65
- 65.088
- 66
- 66.5
- 67
- 68
- 70
- 71.5
- 72
- 73
- 73.025
- 74
- 75
- 76.2
- 77
- 78
- 80
- 81
- 82
- 85
- 86
- 89
- 90
- 92
- 95
- 98
- 100
- 105
- 106
- 108
- 110
- 115
- 116
- 117
- 118
- 120
- 125
- 126
- 127
- 130
- 135
- 137
- 140
- 145
- 146
- 150
- 153
- 155
- 160
- 165
- 166
- 170
- 173
- 175
- 178
- 180
- 185
- 188
- 190
- 195
- 200
- 210
- 215
- 216
- 220
- 225
- 226
- 230
- 240
- 250
- 260
- 270
- 280
- 290
- 300
- 310
- 320
- 340
- 360
- 370
- 380
- 400
- 420
- 440
- 460
- 480
- 500
- 520
- 540
- 580
-
Width B(mm)
- 1
- 2
- 2.5
- 2.75
- 3
- 3.5
- 4
- 4.25
- 4.5
- 4.75
- 5
- 5.25
- 5.5
- 5.75
- 6
- 6.5
- 7
- 7.5
- 8
- 8.25
- 8.5
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 11.75
- 12
- 12.700(1/2)
- 13
- 13.25
- 13.5
- 14
- 14.25
- 15
- 15.25
- 16
- 16.25
- 16.637
- 17
- 17.25
- 17.462
- 18
- 18.25
- 18.288
- 19
- 19.25
- 19.75
- 20
- 20.75
- 21
- 21.25
- 21.75
- 22
- 22.25
- 22.75
- 23
- 23.75
- 24
- 24.25
- 24.75
- 25
- 25.25
- 25.40(1)
- 25.654
- 26
- 26.25
- 26.75
- 27
- 27.25
- 28
- 28.25
- 28.75
- 29
- 29.25
- 29.75
- 30
- 30.5
- 31
- 31.5
- 31.75
- 32
- 32.5
- 32.75
- 33
- 33.25
- 33.5
- 34
- 34.5
- 35
- 35.25
- 36
- 37
- 38
- 38.25
- 38.5
- 39
- 40
- 41
- 42
- 42.25
- 42.5
- 43
- 43.5
- 43.75
- 44.5
- 45
- 45.5
- 45.75
- 46
- 46.5
- 47
- 48
- 48.5
- 49
- 49.5
- 50
- 51
- 51.5
- 52
- 53
- 53.5
- 54
- 54.5
- 55
- 56
- 57
- 58
- 59
- 59.5
- 60
- 61
- 61.5
- 62
- 63
- 63.5
- 63.75
- 64
- 65
- 67
- 67.5
- 67.75
- 68
- 69
- 70
- 71.5
- 71.75
- 72
- 73
- 74
- 75
- 76
- 77
- 77.5
- 78
- 79
- 80
- 81.5
- 82
- 83
- 84
- 84.5
- 85
- 86
- 87
- 88
- 90
- 90.5
- 91
- 92
- 93
- 95
- 97
- 98
- 98.75
- 100
- 102
- 103
- 104
- 106
- 107.75
- 108
- 109
- 114
- 115
- 118
- 120
- 121
- 122
- 127
- 130
- 132
- 150
- 176
- 190
- 192
-
Inner/Outer Ring Material
- Steel
- Stainless Steel
-
Outer Ring
- With Outer Ring
- No Outer Ring
-
Precision (JIS)
- Class 0
- Class 4
- Class 5
-
Number of Raceway Ring Rows
-
Size Standards
-
Specifications
-
Rolling Element Material
-
Outer Ring Type
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy