(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Thrust Ball Bearing - Inch, 600 Series
NICE BEARINGS
The 600 Series bearing is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from hardenable strip steel and are carefully heat treated. These bearings may be plated or manufactured from stainless steel upon request.
The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore.
Features:
• Unground Thrust Bearing
• Easy To Use Inch Dimensions
• Moderate Loads
• Max Speed Range: 1000 - 1200 RPM
• Hardened Rings
• Full Complement of Balls
• Soft Steel Band Offers Ease of Installation
• Upper Ring is Free to Rotate and has Close Fit for Shafts
• Lower Ring is Fixed and has Shaft Clearance in the Bore
Days to Ship: | 7 Days or more |
---|
Thin Section Four-Point Contact Ball Bearing
RBC BEARINGS
The X-Type, or 4-point contact, ball bearing is ideal for moment loading. X-Type bearings are designed with gothic arch raceways creating 4 contact points between the balls and the raceways. This design is excellent for moment loading and reversing axial loading. The X-Type bearing can be used for other light loading conditions, but is not recommended in place of the C- or A-Type bearing for pure radial loads.
Days to Ship: | 7 Days or more |
---|
Deep Groove Ball Bearings - Single Row, Inch Sizes.
SPB-USA (Ezo)
Precision Bearings that are compact and lightweight because of their small diameter and thin wall type.[Features]-Small diameter standard bearing.・ Inch standard size product.・ Abundant variations.[Applications]-Ideal for machine parts (fan motors, encoders, stepping motors, etc.).
Days to Ship: | Same day or more |
---|
Show Stock Products
Thin Section Four-Point Contact Ball Bearing - Sealed
RBC BEARINGS
• Large Diameter
• Small CrossSection
• Snap-Over Ball Separator
• Sealed
Days to Ship: | 7 Days or more |
---|
Thin Section Angular Contact Ball Bearing
RBC BEARINGS
In applications with high axial loads the A-Type, angular contact ball bearing should be used. This bearing also works well in radial or combined radial-thrust applications. The A-Type bearing should never be used alone to support moment loads or reversing axial loading.
Days to Ship: | 7 Days or more |
---|
Deep Groove Ball Bearing - Single Row, Inch, Full Complement, RM Series
NICE BEARINGS
Features:
• Nominal Inch Dimensioned
• Precision Machined and Heat Treated for Long Life
• Zinc Plated for Corrosion Protection
• Full Complement Construction
• Designed for Light Loads and Speeds up to 1,200 RPM
Days to Ship: | 7 Days or more |
---|
RBC BEARINGS
The C-Type, radial contact ball bearing is designed with deep ball grooves to withstand high loads. Although this bearing is used primarily in applications with radial loads, it can withstand moderate axial loads, reversing axial loads, and moment loads.
Days to Ship: | 7 Days or more |
---|
Deep Groove Ball Bearing - Single Row, Inch, 1600 Series
NICE BEARINGS
Precision ground 1600 Series bearings are specially designed to provide a line of low cost yet high quality bearings for adaptation to a majority of precision bearing applications. They are made in easy to use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5000 rpm.
The 1600 Series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life.
The 1600 Series radial bearings are available open, single or doubled shielded, or single or double sealed. Double sealed and double shielded bearings are supplied grease packed as standard.
Days to Ship: | 7 Days or more |
---|
Insert Ball Bearing - Single Row, Inch, ER Series
NICE BEARINGS
Features:
• Exclusive, Heavy Duty “DL” Seal:
• Two Lubrication holes allow for regreasing:
• Two Knurled Cup point set screws offer excellent resistance to loosening under vibratory conditions:
• Fully ground, SAE 52100 chrome alloy steel races:
• Black oxide finish provides added corrosion resistance
Days to Ship: | 9 Days |
---|
Thin Section Four-Point Contact Ball Bearing - Sealed, JU Series
RBC BEARINGS
Features
• 52100 Steel
• Large Diameter
• Light Weight
• Small Cross Section
• Snap-Over Ball Separator
• JU Series
• Sealed
Days to Ship: | 7 Days or more |
---|
Thin Section Ball Bearing - 440C Stainless Steel
RBC BEARINGS
Features
• 440C Stainless Steel
• Large Diameter
• Light Weight
• Small Cross Section
• Snap-Over Ball Separator
Days to Ship: | 7 Days or more |
---|
Thin Section Four-Point Contact Ball Bearing - 440C Stainless Steel
RBC BEARINGS
Features
• 440C Stainless Steel
• Large Diameter
• Small Cross Section
• Snap-Over Ball Separator
Days to Ship: | 7 Days or more |
---|
Deep Groove Ball Bearing - Single Row, Inch, 3000 Series
NICE BEARINGS
Semi-ground 3000 Series bearings are specially designed to provide a line of economical bearings for lighter loads than the 1600 Series bearings and speeds to approximately 2500 rpm. The 3000 Series bearings are dimensionally the same as the 1600 Series bearings, except for the precision of the inner ring.
The 3000 Series radial bearing is available open, single or doubled shielded, or single or double sealed. The double shielded and double sealed versions are grease packed as standard. Open and single closure bearings can be furnished with or without grease as desired.
Days to Ship: | 7 Days or more |
---|
Insert Ball Bearing - Single Row, Inch, 7600 Series
NICE BEARINGS
The 7600 Series bearings are single row retainer type radial bearings similar in construction to the 1600 Series bearings. They incorporate a highly efficient single lip contact seal with metal guard. The inner and outer rings are turned from chrome steel and after careful heat treatment the through hardened rings are accurately ground to close tolerances.The inner ring is extended and contains set screws whereas the 7500 Series bearing does not.
The 7600 Series bearings are recommended for applications requiring the accuracy of rotation and quiet performance of close limit precision grade bearings, and where a superior seal is required to retain lubricant and keep the bearing free from dust and dirt.
Normally double sealed (type DL), the 7600 Series bearings can be produced to order with seals on one side only (type SL) or without seals (type NL). Double sealed bearings are grease packed as standard; however, all types can be furnished with or without grease packing as desired. All types are provided with a snap ring groove, with the snap ring assembled on the bearing as an option.
Days to Ship: | 7 Days or more |
---|
Thin Section Ball Bearing - Sealed
RBC BEARINGS
• Large Diameter
• Light Weight
• Small CrossSection
• Snap-Over Ball Separator
• Sealed
Days to Ship: | 7 Days or more |
---|
Thin Section Ball Bearing - Sealed, JHA Series
RBC BEARINGS
Features
• 52100 Steel
• Large Diameter
• Light Weight
• Small Cross Section
• Snap-Over Ball Separator
• Sealed
• JHA Series
Days to Ship: | 16 Days |
---|
Thin Section Four-Point Contact Ball Bearing - Sealed, JHA Series
RBC BEARINGS
Features
• 52100 Steel
• Large Diameter
• Light Weight
• Small Cross Section
• Snap-Over Ball Separator
• JHA Series
• Sealed
Days to Ship: | 9 Days or more |
---|
Thin Section Ball Bearing - Sealed, JU Series
RBC BEARINGS
Features
• 52100 Steel
• Large Diameter
• Light Weight
• Small Cross Section
• Snap-Over Ball Separator
• Sealed
• JU Series
Days to Ship: | 7 Days or more |
---|
Thin Section Angular Contact Ball Bearing - 440C Stainless Steel
RBC BEARINGS
Features
• 440C Stainless Steel
• Large Diameter
• Light Weight
• Small Cross Section
• Circular Pocket Ball Separator
Days to Ship: | 7 Days or more |
---|
Deep Groove Ball Bearing - Retaining Ring, Single Row, Inch, 7500 Series
NICE BEARINGS
The 7500 Series bearings are single row retainer type radial bearings, similar in construction to the 1600 Series bearings. They incorporate a highly effective single lip contact seal, with metal guard. The inner and outer rings are turned from chrome steel and after careful heat treatment the through hardened rings area accurately ground to close tolerances.
The 7500 Series bearings are recommended for applications requiring the accuracy of rotation and quiet performance of close tolerance precision grade bearings, and where a superior seal is required to retain lubricant and keep the bearing free from dust and dirt.
Normally double sealed (type DL), the 7500 Series bearings can be produced to order with seals on one side only (type SL) or without seals (type NL). Double sealed bearings are grease packed as standard; however, all types can be furnished with or without grease packing as desired. All types are provided with a snap ring groove, with the snap ring assembled on the bearing as an option.
Days to Ship: | 9 Days |
---|
Ball Bearing - Flanged, Single Row, Inch, Full Complement, FSRM Series
NICE BEARINGS
Features:
• Nominal Inch Dimensioned
• Flanged for Ease of Mounting
• Precision Machined and Heat Treated for Durability
• Zinc Plated for Corrosion Protection
• Full Complement Construction
• Designed for Light Loads and Speeds up to 1,200 RPM
Days to Ship: | 7 Days or more |
---|
Insert Ball Bearing - Flanged Housing, Single Row, Inch, 6900 Series
NICE BEARINGS
The 6900 Series bearing consists of a double sealed, semi-ground bearing with an extended inner ring. It is provided with two set screws and a flanged housing designed for flush mounting. Bearings are supplied assembled in the housing. Flanged and non-flanged units are available from stock.
The pressed steel flanged housing provides a secure yet inexpensive means for holding the bearing in place. Although these units are not of the self-aligning type, they will accommodate a limited amount of angular misalignment.
Days to Ship: | 9 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Type |
Inner/Outer Ring Material |
Bearing Style |
Outer Ring Shape |
Precision |
I.D. d(Ø) |
O.D. D(Ø) |
Width B(mm) |
Basic Dynamic Load Rating(N) |
Specifications, Environment |
Load Direction |
Number of Raceway Ring Rows |
Size Standards |
Rolling Element Material |
Brand | NICE BEARINGS | RBC BEARINGS | SPB-USA (Ezo) | RBC BEARINGS | RBC BEARINGS | NICE BEARINGS | RBC BEARINGS | NICE BEARINGS | NICE BEARINGS | RBC BEARINGS | RBC BEARINGS | RBC BEARINGS | NICE BEARINGS | NICE BEARINGS | RBC BEARINGS | RBC BEARINGS | RBC BEARINGS | RBC BEARINGS | RBC BEARINGS | NICE BEARINGS | NICE BEARINGS | NICE BEARINGS |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Deep Groove Ball Bearing - Single Row, Inch, Full Complement, RM Series | Thin Section Four-Point Contact Ball Bearing - Sealed, JU Series | Thin Section Four-Point Contact Ball Bearing - 440C Stainless Steel | Thin Section Four-Point Contact Ball Bearing - Sealed, JHA Series | Thin Section Angular Contact Ball Bearing - 440C Stainless Steel | Deep Groove Ball Bearing - Retaining Ring, Single Row, Inch, 7500 Series | Ball Bearing - Flanged, Single Row, Inch, Full Complement, FSRM Series | Insert Ball Bearing - Flanged Housing, Single Row, Inch, 6900 Series | ||||||||||||||
Days to Ship | 7 Days or more | 7 Days or more |
Same day or more
Show Stock Products | 7 Days or more | 7 Days or more | 7 Days or more | 7 Days or more | 7 Days or more | 9 Days | 7 Days or more | 7 Days or more | 7 Days or more | 7 Days or more | 7 Days or more | 7 Days or more | 16 Days | 9 Days or more | 7 Days or more | 7 Days or more | 9 Days | 7 Days or more | 9 Days or more |
Type | Thrust Bearing | Ball | Ball | Ball | Angular Bearing (Single) | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Angular Bearing (Single) | Ball | Ball | Ball |
Inner/Outer Ring Material | Steel | Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel | Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel | Steel | Steel | Steel |
Bearing Style | - | - | Open Type / Double Shielded / Rubber Seal Type | - | - | - | - | Open Type / Double Shielded / Rubber Seal Type / Single Shielded | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Outer Ring Shape | - | - | Standard / Flanged | - | - | Standard | - | Standard | - | - | - | - | Standard / Flanged | Grooved | - | - | - | - | - | Grooved | Flanged | Standard |
Precision | - | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | - | Class 0 (ABEC-1) | - | - | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | - | - | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | - | - | - |
I.D. d(Ø) | 6.4 (1/4") ~ 38.1 (1-1/2") | 44.5 (1-3/4") ~ 1016 (40") | 3.175/0.1250 ~ 15.875/0.6250 | 50.8 (2") ~ 304.8 (12") | 44.5 (1-3/4") ~ 1016 (40") | 4.8 (3/16") ~ 25.4 (1") | 44.5 (1-3/4") ~ 1016 (40") | 6.4 (1/4") ~ 31.8 (1-1/4") | 16 (5/8") ~ 49.3 (1-15/16") | 101.6 (4") ~ 304.8 (12") | 50.8 (2") ~ 101.6 (4") | 50.8 (2") ~ 101.6 (4") | 6.4 (1/4") ~ 25.4 (1") | 12.7 (1/2") ~ 31.8 (1-1/4") | 50.8 (2") ~ 304.8 (12") | 44.5 (1-3/4") | 44.5 (1-3/4") | 101.6 (4") ~ 304.8 (12") | 50.8 (2") ~ 101.6 (4") | 12.7 (1/2") ~ 31.8 (1-1/4") | 6.4 (1/4") ~ 19.1 (3/4") | 9.7 (3/8") ~ 25.4 (1") |
O.D. D(Ø) | 21.6 (27/32") ~ 65.8 (2-19/32") | 47.8 (1-7/8") ~ 1066.8 (42") | 9.525/0.3750 ~ 34.925/1.3750 | 66.8 (2-5/8") ~ 320.8 (12-5/8") | 47.8 (1-7/8") ~ 1066.8 (42") | 17.5 (11/16") ~ 50.8 (2") | 47.8 (1-7/8") ~ 1066.8 (42") | 17.5 (11/16") ~ 65.3 (2-9/16") | 47 (1-27/32") ~ 90.2 (3-35/64") | 120.7 (4-3/4") ~ 323.9 (12-3/4") | 47.8 (1-7/8") ~ 117.6 (4-5/8") | 47.8 (1-7/8") ~ 117.6 (4-5/8") | 17.5 (11/16") ~ 50.8 (2") | 44.5 (1-3/4") ~ 65.3 (2-9/16") | 66.8 (2-5/8") ~ 320.8 (12-5/8") | 47.8 (1-7/8") ~ 54.1 (2-1/8") | 47.8 (1-7/8") ~ 54.1 (2-1/8") | 120.7 (4-3/4") ~ 323.9 (12-3/4") | 47.8 (1-7/8") ~ 117.6 (4-5/8") | 44.5 (1-3/4") ~ 65.3 (2-9/16") | 17.5 (11/16") ~ 44.5 (1-3/4") | 23.1 (29/32") ~ 50.8 (2") |
Width B(mm) | 7.1 (9/32") ~ 16 (5/8") | 4.8 (3/16") | 3.967/0.1562 ~ 8.733/0.3438 | - | 4.8 (3/16") | 6.4 (1/4") ~ 14.5 (9/16") | 4.8 (3/16") | 6.4 (1/4") ~ 17.5 (11/16") | 31.8 (1-1/4") ~ 52.1 (2-3/64") | - | 4.8 (3/16") | 4.8 (3/16") | 6.4 (1/4") ~ 14.5 (9/16") | 16 (5/8") ~ 19.1 (3/4") | - | - | - | - | 4.8 (3/16") | 16 (5/8") ~ 19.1 (3/4") | 8.1 (5/16") ~ 16 (5/8") | 17.5 (11/16") ~ 26.9 (1-1/16") |
Basic Dynamic Load Rating(N) | 1299 ~ 8675 | 1202 ~ 108235 | 631 ~ 5999 | 2287 ~ 9097 | 4271 ~ 246610 | 1468 ~ 7727 | 1557 ~ 81434 | 2274 ~ 23843 | 6584 ~ 23354 | 6304 ~ 11664 | 1557 ~ 4538 | 1202 ~ 4854 | 1135 ~ 11543 | 4560 ~ 23843 | 2492 ~ 6846 | 1557 ~ 1651 | 1202 ~ 1433 | 5739 ~ 8781 | 4271 ~ 13923 | 4560 ~ 23843 | 1468 ~ 6895 | 1335 ~ 6006 |
Specifications, Environment | - | - | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Load Direction | Thrust | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial |
Number of Raceway Ring Rows | - | - | Single Track | - | - | Single Track | - | Single Track | Single Track | - | - | - | Single Track | Single Track | - | - | - | - | - | Single Track | Single Track | Single Track |
Size Standards | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series |
Rolling Element Material | Steel | Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel | Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel | Steel | Steel | Steel |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy