(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Thin Section Four-Point Contact Ball Bearing - Sealed, JU Series
RBC BEARINGS
Features
• 52100 Steel
• Large Diameter
• Light Weight
• Small Cross Section
• Snap-Over Ball Separator
• JU Series
• Sealed
Days to Ship: | 7 Days or more |
---|
Deep Groove Ball Bearing - Single Row, Inch, 3000 Series
NICE BEARINGS
Semi-ground 3000 Series bearings are specially designed to provide a line of economical bearings for lighter loads than the 1600 Series bearings and speeds to approximately 2500 rpm. The 3000 Series bearings are dimensionally the same as the 1600 Series bearings, except for the precision of the inner ring.
The 3000 Series radial bearing is available open, single or doubled shielded, or single or double sealed. The double shielded and double sealed versions are grease packed as standard. Open and single closure bearings can be furnished with or without grease as desired.
Days to Ship: | 7 Days or more |
---|
Deep Groove Ball Bearings - Heat-resistant.
MISUMI
For complete product overview and details on Ball Bearing - Grease Filled, Heat Resistant Up To 230Deg.C (MISUMI) see the sections below:
Days to Ship: | 6 Days or more |
---|
Ball Bearings - Plastic, Double-Sealed.
MISUMI
For complete product overview and details on Plastic Ball Bearing - UHMW, PTFE, PEEK (MISUMI) see the sections below:
Days to Ship: | 6 Days or more |
---|
Ball Bearings - For Special Environments, Grease or Oil-Free.
MISUMI
New: Ceramic inner/outer ring material types are added. [August 2023]
Ceramic bearings suitable for non-magnetic, non-conductive, and corrosive environments
Days to Ship: | 8 Days or more |
---|
Ball Bearings - Low Particle Generation, Double-Sealed.
MISUMI
•Type : Ball
•Bearing Style : Double Shielded
•Load Direction : Radial
For complete product overview and details on Ball Bearing - Double Shielded, Greased, Dust Resistant (MISUMI) see the sections below:
Days to Ship: | Same day or more |
---|
Show Stock Products
Ball Bearings - Low Particle Generation, with Flange and Double Seals.
MISUMI
•Type : Ball
•Bearing Style : Double Shielded
•Load Direction : Radial
For complete product overview and details on Flanged Ball Bearing - Double Shielded, Greased, Dust Resistant (MISUMI) see the sections below:
Days to Ship: | Same day or more |
---|
Show Stock Products
Self-Aligning Ball Bearings - Open and Double-Row.
MISUMI
New: Width variations are added. [August 2023]
The self-aligning ability enables to tolerate mounting misalignment and deflection during rotation.
Days to Ship: | Same day or more |
---|
Show Stock Products
Deep Groove Ball Bearings - With retaining ring and double-sealed, stainless steel.
MISUMI
•Type : Ball
•Bearing Style : Double Shielded
•Load Direction : Radial
For complete product overview and details on Flanged Deep Groove Ball Bearing - Double Shielded, Stainless Steel (MISUMI) see the sections below:
Days to Ship: | Same day or more |
---|
Show Stock Products
Deep Groove Ball Bearings - Double-Sealed, Clearance Class C3.
MISUMI
For complete product overview and details on Deep Groove Ball Bearing - Double Shielded, C3 Clearance (MISUMI) see the sections below:
Days to Ship: | Same day or more |
---|
Show Stock Products
Deep Groove Ball Bearings - Contact Seals, Stainless Steel.
MISUMI
For complete product overview and details on Deep Groove Ball Bearing - Non-Contact Sealed, Contact Sealed, Stainless Steel (MISUMI) see the sections below:
Days to Ship: | 8 Days or more |
---|
Deep Groove Ball Bearings - Economical, Small, Double-Sealed.
MISUMI
Major overseas manufacturers' bearings equivalent to the domestic products in product quality. Please place order for these products if a large lot of bearings are required.
Days to Ship: | Same day or more |
---|
Show Stock Products
Angular Contact Ball Bearings - Universal Combination.
MISUMI
For complete product overview and details on Angular Contact Ball Bearing - Universal Combination, Precision Grade (MISUMI) see the sections below:
Days to Ship: | Same day or more |
---|
Show Stock Products
Deep Groove Ball Bearings - Economical Model, Small, Double-Sealed.
MISUMI
Major overseas manufacturers' bearings equivalent to the domestic products in product quality. Please place order for these products if a large lot of bearings are required.
Days to Ship: | Same day or more |
---|
Show Stock Products
Deep Groove Ball Bearings - Economical Model, Standard Size, Double-Sealed.
MISUMI
Major overseas manufacturers' bearings equivalent to the domestic products in product quality. Please place order for these products if a large lot of bearings are required.
Days to Ship: | Same day or more |
---|
Show Stock Products
Angular Contact Ball Bearings - Single Row.
MISUMI
For complete product overview and details on Large Angular Contact Ball Bearing - Single Row (MISUMI) see the sections below:
Days to Ship: | Same day or more |
---|
Show Stock Products
Large Size Deep Groove Ball Bearings - Stainless Steel, Single Row.
SPB-USA (Ezo)
Stainless Steel Bearings in sizes that are most used in a wide range of industries.[Features]-A wide variety of types with outer ring flange, thin-walled products, shields and seals.-JIS standard bearing-Larger Diameter Sizes[Application]-Can be used for various rotating parts such as machine parts (motors, etc.).
Days to Ship: | 8 Days or more |
---|
Large Size Deep Groove Ball Bearings - Double Sealed, Single Row.
SPB-USA (Ezo)
Bearings in sizes that are most used in a wide range of industries.[Features]-A wide variety of types with outer ring flange, thin-walled products, shields and seals.-JIS standard bearing-Larger Diameter Sizes[Application]-Can be used for various rotating parts such as machine parts (motors, etc.).
Days to Ship: | 8 Days or more |
---|
Thin Section Ball Bearing - Sealed
RBC BEARINGS
• Large Diameter
• Light Weight
• Small CrossSection
• Snap-Over Ball Separator
• Sealed
Days to Ship: | 7 Days or more |
---|
Thin Section Ball Bearing - Sealed, JHA Series
RBC BEARINGS
Features
• 52100 Steel
• Large Diameter
• Light Weight
• Small Cross Section
• Snap-Over Ball Separator
• Sealed
• JHA Series
Days to Ship: | 16 Days |
---|
Thin Section Four-Point Contact Ball Bearing - Sealed, JHA Series
RBC BEARINGS
Features
• 52100 Steel
• Large Diameter
• Light Weight
• Small Cross Section
• Snap-Over Ball Separator
• JHA Series
• Sealed
Days to Ship: | 9 Days or more |
---|
Thin Section Ball Bearing - Sealed, JU Series
RBC BEARINGS
Features
• 52100 Steel
• Large Diameter
• Light Weight
• Small Cross Section
• Snap-Over Ball Separator
• Sealed
• JU Series
Days to Ship: | 7 Days or more |
---|
Thin Section Angular Contact Ball Bearing - 440C Stainless Steel
RBC BEARINGS
Features
• 440C Stainless Steel
• Large Diameter
• Light Weight
• Small Cross Section
• Circular Pocket Ball Separator
Days to Ship: | 7 Days or more |
---|
Deep Groove Ball Bearing - Retaining Ring, Single Row, Inch, 7500 Series
NICE BEARINGS
The 7500 Series bearings are single row retainer type radial bearings, similar in construction to the 1600 Series bearings. They incorporate a highly effective single lip contact seal, with metal guard. The inner and outer rings are turned from chrome steel and after careful heat treatment the through hardened rings area accurately ground to close tolerances.
The 7500 Series bearings are recommended for applications requiring the accuracy of rotation and quiet performance of close tolerance precision grade bearings, and where a superior seal is required to retain lubricant and keep the bearing free from dust and dirt.
Normally double sealed (type DL), the 7500 Series bearings can be produced to order with seals on one side only (type SL) or without seals (type NL). Double sealed bearings are grease packed as standard; however, all types can be furnished with or without grease packing as desired. All types are provided with a snap ring groove, with the snap ring assembled on the bearing as an option.
Days to Ship: | 9 Days |
---|
Insert Ball Bearing - Single Row, Inch, 7600 Series
NICE BEARINGS
The 7600 Series bearings are single row retainer type radial bearings similar in construction to the 1600 Series bearings. They incorporate a highly efficient single lip contact seal with metal guard. The inner and outer rings are turned from chrome steel and after careful heat treatment the through hardened rings are accurately ground to close tolerances.The inner ring is extended and contains set screws whereas the 7500 Series bearing does not.
The 7600 Series bearings are recommended for applications requiring the accuracy of rotation and quiet performance of close limit precision grade bearings, and where a superior seal is required to retain lubricant and keep the bearing free from dust and dirt.
Normally double sealed (type DL), the 7600 Series bearings can be produced to order with seals on one side only (type SL) or without seals (type NL). Double sealed bearings are grease packed as standard; however, all types can be furnished with or without grease packing as desired. All types are provided with a snap ring groove, with the snap ring assembled on the bearing as an option.
Days to Ship: | 7 Days or more |
---|
Ball Bearing - Flanged, Single Row, Inch, Full Complement, FSRM Series
NICE BEARINGS
Features:
• Nominal Inch Dimensioned
• Flanged for Ease of Mounting
• Precision Machined and Heat Treated for Durability
• Zinc Plated for Corrosion Protection
• Full Complement Construction
• Designed for Light Loads and Speeds up to 1,200 RPM
Days to Ship: | 7 Days or more |
---|
Insert Ball Bearing - Flanged Housing, Single Row, Inch, 6900 Series
NICE BEARINGS
The 6900 Series bearing consists of a double sealed, semi-ground bearing with an extended inner ring. It is provided with two set screws and a flanged housing designed for flush mounting. Bearings are supplied assembled in the housing. Flanged and non-flanged units are available from stock.
The pressed steel flanged housing provides a secure yet inexpensive means for holding the bearing in place. Although these units are not of the self-aligning type, they will accommodate a limited amount of angular misalignment.
Days to Ship: | 9 Days or more |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Type |
Inner/Outer Ring Material |
Bearing Style |
Outer Ring Shape |
Precision |
I.D. d(Ø) |
O.D. D(Ø) |
Width B(mm) |
Basic Dynamic Load Rating(N) |
Specifications, Environment |
Load Direction |
Number of Raceway Ring Rows |
Size Standards |
Rolling Element Material |
|
|
| |||||||||||||||||||||||||
Brand | RBC BEARINGS | NICE BEARINGS | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | SPB-USA (Ezo) | SPB-USA (Ezo) | RBC BEARINGS | RBC BEARINGS | RBC BEARINGS | RBC BEARINGS | RBC BEARINGS | NICE BEARINGS | NICE BEARINGS | NICE BEARINGS | NICE BEARINGS |
Product Series | Thin Section Four-Point Contact Ball Bearing - Sealed, JU Series | Ball Bearings - For Special Environments, Grease or Oil-Free. | Ball Bearings - Low Particle Generation, with Flange and Double Seals. | Deep Groove Ball Bearings - With retaining ring and double-sealed, stainless steel. | Deep Groove Ball Bearings - Double-Sealed, Clearance Class C3. | Deep Groove Ball Bearings - Economical, Small, Double-Sealed. | Deep Groove Ball Bearings - Economical Model, Small, Double-Sealed. | Deep Groove Ball Bearings - Economical Model, Standard Size, Double-Sealed. | Large Size Deep Groove Ball Bearings - Stainless Steel, Single Row. | Large Size Deep Groove Ball Bearings - Double Sealed, Single Row. | Thin Section Four-Point Contact Ball Bearing - Sealed, JHA Series | Thin Section Angular Contact Ball Bearing - 440C Stainless Steel | Deep Groove Ball Bearing - Retaining Ring, Single Row, Inch, 7500 Series | Ball Bearing - Flanged, Single Row, Inch, Full Complement, FSRM Series | Insert Ball Bearing - Flanged Housing, Single Row, Inch, 6900 Series | ||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||
Days to Ship | 7 Days or more | 7 Days or more | 6 Days or more | 6 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 7 Days or more | 16 Days | 9 Days or more | 7 Days or more | 7 Days or more | 9 Days | 7 Days or more | 7 Days or more | 9 Days or more |
Specifications |
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||
Type | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Self-Aligning Ball | Ball | Ball | Ball | Ball | Angular Bearing (Single) | Ball | Ball | Angular Bearing (Single) | Ball | Ball | Ball | Ball | Ball | Ball | Angular Bearing (Single) | Ball | Ball | Ball | Ball |
Inner/Outer Ring Material | Steel | Steel | Stainless Steel | Resin | Stainless Steel | Stainless Steel | Stainless Steel | Steel | Stainless Steel | Steel | Stainless Steel | Steel | Steel | Stainless Steel | Stainless Steel | Steel | Stainless Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel | Steel | Steel | Steel | Steel |
Bearing Style | - | - | Double Shielded | Double Shielded | Double Shielded | Double Shielded | Double Shielded | Open Type | Double Shielded | Double Shielded | Rubber Seal Type | Double Shielded | Open Type | Double Shielded | Double Shielded | Open Type | Open Type / Double Shielded / Rubber Seal Type | Double Shielded | - | - | - | - | - | - | - | - | - |
Outer Ring Shape | - | Standard / Flanged | Standard | Standard | Standard | Standard | Flanged | Standard | With Retaining Ring | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | - | - | - | - | Grooved | Grooved | Flanged | Standard |
Precision | Class 0 (ABEC-1) | - | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 4 (ABEC-7) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | Class 0 (ABEC-1) | - | - | - | - |
I.D. d(Ø) | 101.6 (4") ~ 304.8 (12") | 6.4 (1/4") ~ 25.4 (1") | 10 ~ 30 | 4 ~ 20 | 4 ~ 20 | 3 ~ 20 | 3 ~ 8 | 10 ~ 20 | 10 ~ 40 | 10 ~ 50 | 10 ~ 40 | 3 ~ 8 | 10 ~ 50 | 2 ~ 8 | 10 ~ 25 | 10 ~ 50 | 10 ~ 50 | 10 ~ 12 | 50.8 (2") ~ 304.8 (12") | 44.5 (1-3/4") | 44.5 (1-3/4") | 101.6 (4") ~ 304.8 (12") | 50.8 (2") ~ 101.6 (4") | 12.7 (1/2") ~ 31.8 (1-1/4") | 12.7 (1/2") ~ 31.8 (1-1/4") | 6.4 (1/4") ~ 19.1 (3/4") | 9.7 (3/8") ~ 25.4 (1") |
O.D. D(Ø) | 120.7 (4-3/4") ~ 323.9 (12-3/4") | 17.5 (11/16") ~ 50.8 (2") | 22 ~ 62 | 13 ~ 47 | 13 ~ 47 | 6 ~ 47 | 6 ~ 22 | 30 ~ 52 | 22 ~ 68 | 26 ~ 110 | 26 ~ 80 | 8 ~ 24 | 26 ~ 80 | 5 ~ 22 | 15 ~ 52 | 26 ~ 90 | 26 ~ 80 | 26 ~ 28 | 66.8 (2-5/8") ~ 320.8 (12-5/8") | 47.8 (1-7/8") ~ 54.1 (2-1/8") | 47.8 (1-7/8") ~ 54.1 (2-1/8") | 120.7 (4-3/4") ~ 323.9 (12-3/4") | 47.8 (1-7/8") ~ 117.6 (4-5/8") | 44.5 (1-3/4") ~ 65.3 (2-9/16") | 44.5 (1-3/4") ~ 65.3 (2-9/16") | 17.5 (11/16") ~ 44.5 (1-3/4") | 23.1 (29/32") ~ 50.8 (2") |
Width B(mm) | - | 6.4 (1/4") ~ 14.5 (9/16") | 6 ~ 16 | 5 ~ 14 | 5 ~ 14 | 2.5 ~ 14 | 2.5 ~ 7 | 9 ~ 15 | 6 ~ 16 | 8 ~ 27 | 8 ~ 18 | 4 ~ 8 | 8 ~ 16 | 2.3 ~ 7 | 4 ~ 15 | 8 ~ 20 | 8 ~ 19 | 8 | - | - | - | - | 4.8 (3/16") | 16 (5/8") ~ 19.1 (3/4") | 16 (5/8") ~ 19.1 (3/4") | 8.1 (5/16") ~ 16 (5/8") | 17.5 (11/16") ~ 26.9 (1-1/16") |
Basic Dynamic Load Rating(N) | 6304 ~ 11664 | 1135 ~ 11543 | 1130 ~ 16500 | - | - | 177 ~ 12800 | 177 ~ 2799 | 5550 ~ 12700 | 2700 ~ 19500 | 4550 ~ 62000 | 3900 ~ 24800 | 560 ~ 4000 | 5300 ~ 26000 | 166 ~ 3333 | 680 ~ 11900 | 5350 ~ 41500 | 3860 ~ 22630 | 3860 ~ 4340 | 2492 ~ 6846 | 1557 ~ 1651 | 1202 ~ 1433 | 5739 ~ 8781 | 4271 ~ 13923 | 4560 ~ 23843 | 4560 ~ 23843 | 1468 ~ 6895 | 1335 ~ 6006 |
Specifications, Environment | - | - | Standard / Heat Resistance | Standard / Heat Resistance / Water Resistance / Non-magnetic / Dust Resistant | Standard / Heat Resistance / Water Resistance / Antirust / For Vacuum | Standard | Standard | Standard | Standard | Standard | Standard / Dust Resistant | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | - | - | - | - | - | - | - | - |
Load Direction | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial |
Number of Raceway Ring Rows | - | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Double Row | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | Single Track | - | - | - | - | - | Single Track | Single Track | Single Track | Single Track |
Size Standards | Inch Series | Inch Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series | Inch Series |
Rolling Element Material | Steel | Steel | Stainless Steel | Ceramics / Glass | Stainless Steel / Ceramics | Stainless Steel | Stainless Steel | Steel | Stainless Steel | Steel | Stainless Steel | Steel | Steel | Stainless Steel | Stainless Steel | Steel | Stainless Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel | Steel | Steel | Steel | Steel |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy