(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Rotary Shafts（Keyway：Keyway Option (Alteration)）
Basic Shape
-
Straight -
One End Stepped -
Both Ends Stepped -
Both Ends Double Stepped -
Hollow
-
Rotary Shafts - Retaining ring grooves on both ends.
MISUMI
New diameter sizes (13, 16, 17, 18 and 22) are added for h9 tolerance types. [3/31/23]
Straight Rotary Shafts - Retaining Ring Grooves on Both Ends are available in 1045 Carbon Steel or Equivalent and 304 Stainless Steeland 4137 Alloy Steel or Equivalent, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 2mm - 50mm
[Length range]15mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
MISUMI
New diameter sizes (13, 16, 17, 18 and 22) are added for h9 tolerance types. [3/31/23]
Straight Rotary Shafts are available in 1045 Carbon Steel or Equivalent and 304 Stainless Steeland 4137 Alloy Steel or Equivalent, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 2mm - 50mm
[Length range]15mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 7 Days or more -
Rotary Shafts - One end stepped and externally threaded.
MISUMI
New diameter sizes (13, 16, 17, 18 and 22) are added for h9 tolerance types. [3/31/23]
Straight Rotary Shafts - One End Stepped and Threaded are available in 1045 Carbon Steel or Equivalent and 304 Stainless Steeland 4137 Alloy Steel or Equivalent, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]15mm - 995mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 7 Days or more -
Rotary Shafts - One end internally threaded.
MISUMI
New diameter sizes (13, 16, 17, 18 and 22) are added for h9 tolerance types. [3/31/23]
Straight Rotary Shafts - One End Tapped are available in 1045 Carbon Steel or Equivalent and 304 Stainless Steeland 4137 Alloy Steel or Equivalent, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 4mm - 50mm
[Length range]15mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Rotary Shafts - Both ends stepped, internally threaded.
MISUMI
New diameter sizes (13, 16, 17, 18 and 22) are added for h9 tolerance types. [3/31/23]
Straight Rotary Shafts - Both Ends Stepped and Tapped are available in 1045 Carbon Steel or Equivalent and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]15mm - 998mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Rotary Shafts - Both ends stepped.
MISUMI
New diameter sizes (13, 16, 17, 18 and 22) are added for h9 tolerance types. [3/31/23]
Straight Rotary Shafts - Both Ends Stepped are available in 1045 Carbon Steel or Equivalent and 304 Stainless Steeland 4137 Alloy Steel or Equivalent, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]15mm - 996mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Rotary Shafts - Double stepped on both ends.
MISUMI
New diameter sizes (13, 16, 18 and 22) are available with SS material. [3/31/23]
Straight Rotary Shafts - Both Ends Double Stepped are available in 1045 Carbon Steel or Equivalent and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide or No Surface Treatment.
[Diameter range] 6mm - 30mm
[Length range]20mm - 992mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Spec Change
- Price Reduction
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Rotary Shafts - Hollow and straight.
MISUMI
Straight Hollow Rotary Shafts are available in 1045 Carbon Steel or Equivalent and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 10mm - 50mm
[Length range]20mm - 600mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- METRIC
- inCAD Components
Days to Ship: 12 Days or more -
Rotary Shafts - Both ends are internally threaded, sizes in inches.
MISUMI
Straight Rotary Shafts - Both Ends Tapped, Inch Measurements are available in 1045 Carbon Steel and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 0.25(1/4)in - 1.5 (1-1/2)in
[Length range]0.75in - 30in. Use the alteration overall Length in 0.01in increment.
Metric option is available, please click Here.- Lead Time Reduction
- INCH
Days to Ship: 10 Days or more -
Rotary Shafts - Both ends stepped, sizes in inches.
MISUMI
Straight Rotary Shafts - Both Ends Stepped, Inch Measurements are available in 1045 Carbon Steel and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 0.25(1/4)in - 1.5 (1-1/2)in
[Length range]0.75in - 29.5in. Use the alteration LKC to specify the length in 0.01in increment.
Metric option is available, please click Here.- Lead Time Reduction
- INCH
Days to Ship: 10 Days or more -
Rotary Shafts - Both ends stepped, with retaining ring groove.
MISUMI
New diameter sizes (13, 16, 18 and 22) are available with SS material. [3/31/23]
Straight Rotary Shafts - Both Ends Stepped with Retaining Ring Groove are available in 1045 Carbon Steel or Equivalent and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]20mm - 796mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Rotary Shafts - Both ends are internally threaded.
MISUMI
New diameter sizes (13, 16, 17, 18 and 22) are added for h9 tolerance types. [3/31/23]
Straight Rotary Shafts - Both Ends Tapped are available in 1045 Carbon Steel or Equivalent and 304 Stainless Steeland 4137 Alloy Steel or Equivalent, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 4mm - 50mm
[Length range]15mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Rotary Shafts - One end stepped, with both ends internally threaded.
MISUMI
New diameter sizes (13, 16, 17, 18 and 22) are added for h9 tolerance types. [3/31/23]
Straight Rotary Shafts - One End Stepped, Both Ends Tapped are available in 1045 Carbon Steel or Equivalent and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]15mm - 998mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 7 Days or more -
Rotary Shafts - Retaining ring grooves on both ends, sizes in inches.
MISUMI
Straight Rotary Shafts - Retaining Ring Grooves on Both Ends, Inch Measurements are available in 1045 Carbon Steel and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 0.13(1/80)in - 1.25 (1-1/4)in
[Length range]0.75in - 30in. Use the alteration overall Length in 0.01in increment.
Metric option is available, please click Here.- Lead Time Reduction
- INCH
Days to Ship: 10 Days or more -
MISUMI
Straight Rotary Shafts - One Threaded End, One Tapped End, Inch Measurements, Locknuts are available in 1045 Carbon Steel and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 0.25(1/4)in - 1.5 (1-1/2)in
[Length range]0.75in - 29in. Use the alteration LKC to specify the length in 0.01in increment.
Metric option is available, please click Here.- Lead Time Reduction
- INCH
Days to Ship: 10 Days or more -
MISUMI
Straight Rotary Shafts - One Threaded End, One Tapped End, Metric, Locknuts are available in 1045 Carbon Steel and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 0.25(1/4)in - 1.5 (1-1/2)in
[Length range]0.75in - 29in. Use the alteration LKC to specify the length in 0.01in increment.
Inch option is available, please click Here.- Lead Time Reduction
- INCH
Days to Ship: 10 Days or more -
Rotary Shafts - Both ends stepped and externally threaded.
MISUMI
New diameter sizes (13, 16, 17, 18 and 22) are added for h9 tolerance types. [3/31/23]
Straight Rotary Shafts - Both Ends Stepped and Threaded are available in 1045 Carbon Steel or Equivalent and 304 Stainless Steeland 4137 Alloy Steel or Equivalent, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]15mm - 990mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 7 Days or more -
Rotary Shafts - One end stepped, with snap ring groove.
MISUMI
New diameter sizes (13, 16, 18 and 22) are available with SS material. [3/31/23]
Straight Rotary Shafts - One End Stepped with Retaining Ring Groove are available in 1045 Carbon Steel or Equivalent and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]20mm - 798mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Rotary Shafts - One end stepped.
MISUMI
New diameter sizes (13, 16, 17, 18 and 22) are added for h9 tolerance types. [3/31/23]
Straight Rotary Shafts - One End Stepped are available in 1045 Carbon Steel or Equivalent and 304 Stainless Steeland 4137 Alloy Steel or Equivalent, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]15mm - 998mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 7 Days or more -
Rotary Shafts - Both ends stepped and one end externally threaded.
MISUMI
New diameter sizes (13, 16, 18 and 22) are available with SS material. [3/31/23]
Straight Rotary Shafts - Both Ends Stepped, One End Threaded are available in 1045 Carbon Steel or Equivalent and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]15mm - 995mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
MISUMI
Straight Rotary Shafts - Both Ends Stepped, One End Threaded, One End Tapped are available in 1045 Carbon Steel or Equivalent, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]15mm - 996mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Rotary Shafts - Straight, sizes in inches.
MISUMI
Rotary Shafts - Straight, Inch Measurements are available in 1045 Carbon Steel and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 0.13 (1/8)in - 1.5 (1-1/2)in
[Length range]0.75in - 30in. Use the alteration overall Length in 0.01in increment.
Metric option is available, please click Here.- Lead Time Reduction
- INCH
Days to Ship: 10 Days or more -
Rotary Shafts - One end is internally threaded, sizes in inches.
MISUMI
Straight Rotary Shafts - One Tapped End, Inch Measurements are available in 1045 Carbon Steel and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 0.25(1/4)in - 1.5 (1-1/2)in
[Length range]0.75in - 30in. Use the alteration overall Length in 0.01in increment.
Metric option is available, please click Here.- Lead Time Reduction
- INCH
Days to Ship: 10 Days or more -
Rotary Shafts - Both ends are externally threaded, sizes in inches.
MISUMI
Straight Rotary Shafts - Both Ends Threaded, Inch Measurements are available in 1045 Carbon Steel and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 0.25(1/4)in - 1.5 (1-1/2)in
[Length range]0.75in - 28in. Use the alteration LKC to specify the length in 0.01in increment.
Metric option is available, please click Here.- Lead Time Reduction
- INCH
Days to Ship: 10 Days or more -
Rotary Shafts - Both ends are externally threaded for metric locknuts, sizes in inches.
MISUMI
Straight Rotary Shafts - Both Ends Threaded, Metric, Locknuts are available in 1045 Carbon Steel and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 0.25(1/4)in - 1.5 (1-1/2)in
[Length range]0.75in - 28in. Use the alteration LKC to specify the length in 0.01in increment.
Inch option is available, please click Here.- Lead Time Reduction
- INCH
Days to Ship: 10 Days or more -
Rotary Shafts - Both ends stepped and externally threaded, sizes in inches.
MISUMI
Straight Rotary Shafts - Both Ends Stepped and Tapped, Inch Measurements are available in 1045 Carbon Steel and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 0.38(3/8)in - 1.5 (1-1/2)in
[Length range]0.75in - 29.5in. Use the alteration LKC to specify the length in 0.01in increment.
Metric option is available, please click Here.- Lead Time Reduction
- INCH
Days to Ship: 10 Days or more -
Rotary Shafts - Both ends internally threaded, one end stepped, sizes in inches.
MISUMI
Straight Rotary Shafts - One Stepped End, Both Ends Tapped, Inch Measurements are available in 1045 Carbon Steel and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 0.38(3/8)in - 1.5 (1-1/2)in
[Length range]0.75in - 29.75in. Use the alteration LKC to specify the length in 0.01in increment.
Metric option is available, please click Here.- Lead Time Reduction
- INCH
Days to Ship: 10 Days or more -
Rotary Shafts - One end stepped internally threaded, rear end externally threaded, sizes in inches.
MISUMI
Straight Rotary Shafts - One End Stepped and Tapped End, One End Threaded, Inch Measurements are available in 1045 Carbon Steel and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 0.38(3/8)in - 1.5 (1-1/2)in
[Length range]0.75in - 28in. Use the alteration LKC to specify the length in 0.01in increment.
Metric option is available, please click Here.- Lead Time Reduction
- INCH
Days to Ship: 10 Days or more -
MISUMI
Straight Rotary Shafts - One End Stepped and Tapped, One End Threaded, Metric, Locknut are available in 1045 Carbon Steel and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 0.38(3/8)in - 1.5 (1-1/2)in
[Length range]0.75in - 28in. Use the alteration LKC to specify the length in 0.01in increment.
Metric option is available, please click Here.- Lead Time Reduction
- METRIC
Days to Ship: 10 Days or more -
Rotary Axes - Configurable ends.
MISUMI
Straight Rotary Shafts with Selectable End Shape are available in 1045 Carbon Steel or Equivalent and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]20mm - 800mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Degreasing
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Rotary Shafts - One stepped end and internally threaded rear end.
MISUMI
New diameter sizes (13, 16, 17, 18 and 22) are added for h9 tolerance types. [3/31/23]
Straight Rotary Shaft - One-End Stepped, One-End Tapped are available in 1045 Carbon Steel or Equivalent and 304 Stainless Steel and 4137 Alloy Steel or Equivalent, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment .
[Diameter range] 6mm - 50mm
[Length range]15mm - 998mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option is available, please click Here.- Spec Expansion
- inCAD Components
Days to Ship: 7 Days or more -
Rotary Shafts - One end stepped and externally threaded, one end internally threaded.
MISUMI
New diameter sizes (13, 16, 17, 18 and 22) are added for h9 tolerance types. [3/31/23]
Straight Rotary Shafts - One End Stepped, One End Threaded, One End Tapped are available in 1045 Carbon Steel or Equivalent and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]15mm - 995mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option is available, please click Here.- Spec Expansion
- inCAD Components
Days to Ship: 7 Days or more -
Rotary Shafts - One end stepped and internally threaded, one end straight.
MISUMI
New diameter sizes (13, 16, 17, 18 and 22) are added for h9 tolerance types. [3/31/23]
Straight Rotary Shafts - One End Stepped and Tapped are available in 1045 Carbon Steel or Equivalent and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]15mm - 998mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option is available, please click Here.- Spec Expansion
- inCAD Components
Days to Ship: 7 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Basic Shape |
| Shaft Dia. D(mm) |
| Shaft Dia. D(inch) |
| End Shape (Left) |
| End Shape (Right) |
| Material |
| Heat Treatment |
| Surface Finish |
| Keyway |
| Shaft Dia. Tolerance (Metric Only) |
| Length L(inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Rotary Shafts - Both ends are internally threaded, sizes in inches. | Rotary Shafts - Both ends stepped, with retaining ring groove. | Rotary Shafts - One end stepped, with both ends internally threaded. | Rotary Shafts - Retaining ring grooves on both ends, sizes in inches. | Rotary Shafts - Both ends stepped and one end externally threaded. | Rotary Shafts - One end is internally threaded, sizes in inches. | Rotary Shafts - Both ends are externally threaded, sizes in inches. | Rotary Shafts - Both ends are externally threaded for metric locknuts, sizes in inches. | Rotary Shafts - Both ends stepped and externally threaded, sizes in inches. | Rotary Shafts - Both ends internally threaded, one end stepped, sizes in inches. | Rotary Shafts - One end stepped internally threaded, rear end externally threaded, sizes in inches. | Rotary Shafts - One stepped end and internally threaded rear end. | Rotary Shafts - One end stepped and externally threaded, one end internally threaded. | Rotary Shafts - One end stepped and internally threaded, one end straight. | |||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 9 Days or more | 7 Days or more | 7 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 10 Days or more | 12 Days or more | 10 Days or more | 10 Days or more | 9 Days or more | 9 Days or more | 7 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 7 Days or more | 9 Days or more | 7 Days or more | 9 Days or more | 9 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 7 Days or more | 7 Days or more | 7 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Basic Shape | Straight | Straight | One End Stepped | Straight | Both Ends Stepped | Both Ends Stepped | Both Ends Double Stepped | Hollow | Straight | Both Ends Stepped | Both Ends Stepped | Straight | One End Stepped | Straight | One End Stepped | One End Stepped | Both Ends Stepped | One End Stepped | One End Stepped | Both Ends Stepped | Both Ends Stepped | Straight | Straight | Both Ends Stepped | Both Ends Stepped | Both Ends Stepped | One End Stepped | Both Ends Stepped | Both Ends Stepped | Straight / One End Stepped / Both Ends Stepped | One End Stepped | One End Stepped | One End Stepped |
| Shaft Dia. D(mm) | 2 ～ 50 | 2 ～ 50 | 6 ～ 50 | 4 ～ 50 | 6 ～ 50 | 6 ～ 50 | 6 ～ 30 | 10 ～ 50 | - | - | 6 ～ 50 | 4 ～ 50 | 6 ～ 50 | - | - | - | 6 ～ 50 | 6 ～ 50 | 6 ～ 50 | 6 ～ 50 | 6 ～ 50 | - | - | - | - | - | - | - | - | 6 ～ 50 | 6 ～ 50 | 6 ～ 50 | 6 ～ 50 |
| Shaft Dia. D(inch) | - | - | - | - | - | - | - | - | 1 ～ 5/8 | 1 ～ 5/8 | - | - | - | 1 ～ 5/8 | 1 ～ 5/8 | 1 ～ 5/8 | - | - | - | - | - | 1 ～ 5/8 | 1 ～ 5/8 | 1 ～ 5/8 | 1 ～ 5/8 | 1 ～ 5/8 | 1 ～ 5/8 | 1 ～ 5/8 | 1 ～ 5/8 | - | - | - | - |
| End Shape (Left) | Retaining Ring Groove | No Machining | Threaded | Tapped | Tapped | No Machining | No Machining | No Machining | Tapped | No Machining | Retaining Ring Groove | Tapped | Tapped | Retaining Ring Groove | Threaded | Threaded | Threaded | Retaining Ring Groove | No Machining | No Machining | Tapped | No Machining | Tapped | Threaded | Threaded | Tapped | Tapped | Tapped | Tapped | No Machining / Tapped / Threaded / Retaining Ring Groove / Hex Hole / Tapped Holes | No Machining | Threaded | Tapped |
| End Shape (Right) | Retaining Ring Groove | No Machining | No Machining | No Machining | Tapped | No Machining | No Machining | No Machining | Tapped | No Machining | Retaining Ring Groove | Tapped | Tapped | Retaining Ring Groove | Tapped | Tapped | Threaded | No Machining | No Machining | Threaded | Threaded | No Machining | No Machining | Threaded | Threaded | Tapped | Tapped | Threaded | Threaded | No Machining / Tapped / Threaded / Retaining Ring Groove / Hex Hole / Tapped Holes | Tapped | Tapped | No Machining |
| Material | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel |
| Heat Treatment | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened |
| Surface Finish | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide | Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel |
| Keyway | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) |
| Shaft Dia. Tolerance (Metric Only) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | g6 (Ground) | g6 (Ground) | - | - | g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | - | - | - | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | g6 (Ground) | g6 (Ground) | - | - | - | - | - | - | - | - | g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) |
| Length L(inch) | - | - | - | - | - | - | - | - | 0.75 ～ 30 | 0.75 ～ 29.5 | - | - | - | 0.75 ～ 30 | 0.75 ～ 29 | 0.75 ～ 29 | - | - | - | - | - | 0.75 ～ 30 | 0.75 ～ 30 | 0.75 ～ 28 | 0.75 ～ 28 | 0.75 ～ 29.5 | 0.75 ～ 29.75 | 0.75 ～ 28 | 0.75 ～ 28 | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Metric / Inch
- metric
- inch
-
Shaft Dia. D(mm)
-
Shaft Dia. D(inch)
-
End Shape (Left)
-
No Machining -
Tapped -
Threaded -
Retaining Ring Groove -
D-Cut -
For Tension -
Hex Hole -
Tapped Holes
-
-
End Shape (Right)
-
No Machining -
Tapped -
Threaded -
Retaining Ring Groove -
D-Cut -
For Tension -
Hex Hole -
Tapped Holes
-
-
Material
- Steel
- Stainless Steel
-
Heat Treatment
- Not Hardened
- Hardened
-
Surface Finish
- None
- Black Oxide
- Electroless Nickel
-
Keyway
-
Shaft Dia. Tolerance (Metric Only)
-
Length L(inch)
[0.75-30/0.01inch Unit(s)]
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- 7 Days or Less
- 9 Days or Less
- 10 Days or Less
- 12 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy