(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
Locating Pins（Shank Dia. Tolerance：m6）
Technical Information【LOCATING PINS】
Basic Shape
-
Large Head -
Small Head -
Straight / With Air Vent -
Shouldered -
Screw Mount -
Flanged -
2-Stepped -
Straight
-
Large Head Locating Pins - Round or diamond shaped head, tapered tip and straight shank.
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
- Volume Discount
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Large Head Locating Pins - Round head, flat tip and straight shank configurable P/L/B dimensions.
MISUMI
Has the typically shaped head (Flat).
- Volume Discount
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Large Head Locating Pins - Round or diamond shaped head, tapered tip, straight shank.
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
- Spec Change
- inCAD Components
Days to Ship: 7 Days or more -
Large Head Locating Pins - Round or diamond shaped head, tapered tip, internally threaded shank.
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
- Spec Change
- inCAD Components
Days to Ship: 7 Days or more -
Shoulder Locating Pins - Round or diamond shaped head, shank type and tip selectable.
MISUMI
Locating Pins with 3 types of tip shape selectable.
- Spec Change
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Large Head Locating Pins - Round head, bullet tip and straight shank.
MISUMI
The B dimension is shortened and the insertion guide is reshaped to Bullet Nose in order to facilitate insertion/removal of workpieces. This product is Compact Type enabling the L dimension to be shortened also.
- Spec Change
- inCAD Components
Days to Ship: 10 Days or more -
Small Head Locating Pins - Round or diamond shaped head, tapered tip and straight shank.
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
- Volume Discount
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 7 Days or more -
MISUMI
The straight shank is used for press fit and is selectable in m6 or p6 fit tolerances. The pin material is hardened stainless steel (35HRC). P/L/B dimensions are configurable in high precision ranges.
- Spec Change
Days to Ship: 10 Days or more -
Large Head Locating Pins - Round or diamond shaped head, spherical tip, straight shank.
MISUMI
Has the Sphere-shaped head with no edge. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
- Spec Change
- inCAD Components
Days to Ship: 7 Days or more -
Straight Locating Pins - Round head with tapered, flat tip and straight shank.
MISUMI
Straight, Tapered-shaped Locating Pins with the angle selectable[FY21 new product]・Configurable D dimension can be specified in increments of 0.01mm (new product type)
- Spec Change
- inCAD Components
Days to Ship: 8 Days or more -
Shoulder Locating Pins - Large or Small Head, with flat conical tip and internally threaded shank.
MISUMI
Shouldered Locating Pins with the taper-shaped head
- Spec Change
- inCAD Components
Days to Ship: 9 Days or more -
Large Head Locating Pins - Round or diamond shaped head, spherical tip and straight shank.
MISUMI
Has the Sphere-shaped head with no edge. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
- Volume Discount
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 7 Days or more -
Small Head Locating Pins - Round or diamond shaped head, spherical tip and straight shank.
MISUMI
Has the Sphere-shaped head with no edge. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
- Volume Discount
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 7 Days or more -
Small Diameter Shoulder Locating Pins - Round head, selectable tip and straight shank.
MISUMI
Locating pins with �4 or less pin diameter. Selectable from 4 different tip shapes.
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
- Spec Change
- inCAD Components
Days to Ship: 7 Days or more -
Straight Locating Pins - Round head with spherical tip and straight shank.
MISUMI
Straight, Tapered-shaped Locating Pins with the angle selectable[FY21 new product]・Configurable D dimension can be specified in increments of 0.01mm (new product type)
- Spec Change
- inCAD Components
Days to Ship: 7 Days or more -
Large Head Locating Pins - Round/diamond head, tapered tip, straight shank, selectable tolerances.
MISUMI
The straight shank is used for press fit. Head and shank diameter tolerance is selectable from m6, p6, g6, h7 or (0 to -0.01). Pin material is hardened Stainless Steel (35HRC). The P/L/B dimensions are configurable in high precision ranges.
Days to Ship: 10 Days or more -
Large Head Locating Pins - Round head, flat tip, straight shank.
MISUMI
Has the typically shaped head (Flat).
- Spec Change
- inCAD Components
Days to Ship: 7 Days or more -
Large Head Locating Pins - Round head, tapered tip, straight shank.
MISUMI
Has the head newly shaped (No Edge). Such reshaping prevents the located object from being damaged. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
- Spec Change
- inCAD Components
Days to Ship: 10 Days or more -
Large Head Locating Pins - Round head, selectable tip and straight shank, resin.
MISUMI
Selectable material locating pins: Polyacetal, MC nylon, CDR2 nylon and peek. Tapered, spherical or flat tip. Straight shank with m6 tolerances. P, L and B parameters configurable, D is selectable.
- inCAD Components
Days to Ship: 8 Days or more -
Shoulder Locating Pins - Round or diamond shaped head, tapered tip and straight shank.
MISUMI
Shouldered Locating Pins with the taper-shaped head
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Large Head Locating Pins - Round or diamond shaped head, selectable tip type and straight shank.
MISUMI
Locating Pins with 3 types of tip shape selectable.
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 7 Days or more -
Large Head Locating Pins - Triangular or round head, tapered tip and straight shank.
MISUMI
•Shape: Large Head•Head Dia. Tolerance: 0/-0.01•Shank Dia. Tolerance: m6•Head Tip Shape: Tapered•Shank Style: Straight (Press-fit)
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
MISUMI
The internally threaded stem is held by screws from the opposite side of the locating pin orientation. The head and shank diameter tolerance is selectable from m6, p6, g6, h7 or (0 to -0.01). Pin material is hardened Stainless Steel (35HRC). The P/L/B dimensions are configurable in high precision ranges.
Days to Ship: 10 Days or more -
Large Head Locating Pins - Round head, flat tip, straight shank (Hardened Stainless Steel).
MISUMI
The straight shank is used for press fit and is selectable in m6 or p6 fit tolerances. The pin material is hardened stainless steel (35HRC). P/L/B dimensions are configurable in high precision ranges.
- Spec Change
Days to Ship: 10 Days or more -
Large Head Locating Pins - Round or diamond shaped head, spherical tip, internally threaded shank.
MISUMI
Has the Sphere-shaped head with no edge. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
- Spec Change
- inCAD Components
Days to Ship: 7 Days or more -
Large Head Locating Pins - Round head, tapered tip and straight shank, P/B/D/D/R/E/L configurable.
MISUMI
Has the head newly shaped (No Edge). Such reshaping prevents the located object from being damaged. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
- Spec Change
- inCAD Components
Days to Ship: 10 Days or more -
Small Head Locating Pins - Round or diamond shaped head with tapered tip and straight shank.
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
- Spec Change
- inCAD Components
Days to Ship: 7 Days or more -
Small Head Locating Pins - Round head with flat tip and straight shank.
MISUMI
Has the typically shaped head (Flat).
- Spec Change
- inCAD Components
Days to Ship: 7 Days or more -
Small Head Locating Pins - Round head, flat tip and straight shank.
MISUMI
Has the typically shaped head (Flat).
- Volume Discount
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 7 Days or more -
Small Head Locating Pins - Plastic, round head and selectable tip, straight shank with metal center.
MISUMI
Locating pins with �4 or less pin diameter. Selectable from 4 different tip shapes.
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Small Head Locating Pins - Plastic, selectable head and tip, straight shank.
MISUMI
Resin locating pins with small head. Used to avoid possible scratches. Tip type is selectable in 3 different options: conical, spherical or flat. The head shape is selectable between round or diamond. Different materials available such as polyacetal, MC nylon and PEEK. Configurable L/P/B dimensions.
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Locating Pins with Shoulder - Round head, tapered tip, straight shank.
MISUMI
Locating pin with a long conical part. The workpiece can be received by the collet and the base will not be damaged. Options available in tool steel or stainless steel, additionally hardened heat treatment and/or hard chrome surface treatment can be configured. Clamping is by means of press fit.
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
MISUMI
The straight shank is used for press fit and is selectable in m6 or p6 fit tolerances. The pin material is hardened stainless steel (35HRC). P/L/B dimensions are configurable in high precision ranges.
- Spec Change
Days to Ship: 10 Days or more -
MISUMI
The externally threaded stem is held by a nut from the opposite side of the locating pin orientation. The head and shank diameter tolerance is selectable from m6, p6, g6, h7 or (0 to -0.01). Pin material is hardened Stainless Steel (35HRC). The P/L/B dimensions are configurable in high precision ranges.
Days to Ship: 10 Days or more -
MISUMI
The internally threaded stem is held by screws from the opposite side of the locating pin orientation. The head and shank diameter tolerance is selectable from m6, p6, g6, h7 or (0 to -0.01). Pin material is hardened Stainless Steel (35HRC). The P/L/B dimensions are configurable in high precision ranges.
Days to Ship: 10 Days or more -
Large Head Locating Pins - Round/diamond head, ball tip, straight shank, selectable tolerances.
MISUMI
The straight shank is used for press fit. Head and shank diameter tolerance is selectable from m6, p6, g6, h7 or (0 to -0.01). Pin material is hardened Stainless Steel (35HRC). The P/L/B dimensions are configurable in high precision ranges.
Days to Ship: 10 Days or more -
MISUMI
The externally threaded stem is held by a nut from the opposite side of the locating pin orientation. The head and shank diameter tolerance is selectable from m6, p6, g6, h7 or (0 to -0.01). Pin material is hardened Stainless Steel (35HRC). The P/L/B dimensions are configurable in high precision ranges.
Days to Ship: 10 Days or more -
MISUMI
Small head pin. The straight shank is used for press fit and is selectable in m6 or p6 fit tolerances. Pin material is hardened stainless steel (35HRC). P/L/B dimensions are configurable in high precision ranges.
- Spec Change
Days to Ship: 10 Days or more -
Large Head Locating Pins - Round or diamond shaped head, tapered tip, externally threaded shank.
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
- Spec Change
- inCAD Components
Days to Ship: 7 Days or more -
Large Head Locating Pins - Round or diamond shaped head, spherical tip, externally threaded shank.
MISUMI
Has the Sphere-shaped head with no edge. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
- Spec Change
- inCAD Components
Days to Ship: 7 Days or more -
Large Head Locating Pins - Round head, flat tip, externally threaded shank.
MISUMI
Has the typically shaped head (Flat).
- Spec Change
- inCAD Components
Days to Ship: 7 Days or more -
Large Head Locating Pins - Round head, flat tip, internally threaded shank.
MISUMI
Has the typically shaped head (Flat).
- Spec Change
- inCAD Components
Days to Ship: 7 Days or more -
Large Head Side Locating Pins - Round head, flat tip, straight shank.
MISUMI
Has the typically shaped head (Flat).
- inCAD Components
Days to Ship: 10 Days or more -
MISUMI
Has the head newly shaped (No Edge). Such reshaping prevents the located object from being damaged. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
- Spec Change
- inCAD Components
Days to Ship: 10 Days or more
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Head Shape
-
Round -
Diamond -
Triangle
-
-
Head Tip Shape
-
Tapered -
Round Tapered -
Taper R -
R -
Spherical -
Flat -
Bullet Nose
-
-
Drive
-
None -
With Screw Mount Hole -
With Hex Socket -
With Wrench Hole -
Flathead Slot
-
-
Shank Style
-
Straight (Press-fit) -
Tapped -
Threaded -
Notch -
Set Screw Flat
-
-
Material
- Steel
- Stainless Steel
- Resin
- Aluminum
-
Heat Treatment
- Not Hardened
- Immersion Quenching
- Hardened
-
Surface Finish
- None
- Black Oxide
- Electroless Nickel
- Hard Chrome Plating
- Buffed Surface
- Hard Chrome Plating + Buffed Surface
- Clear Anodize
-
Metric / Inch
- metric
-
Head Diameter(mm)
-
Head Diameter(Inch)
-
Head Dia. Tolerance
-
Shank Diameter(mm)
-
Shank Diameter(Inch)
-
Shank Dia. Tolerance
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
- 13 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy