(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Large Head Locating Pins - Round or diamond shaped head, tapered tip and straight shank.
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Days to Ship: | Same day or more |
---|
Show Stock Products
Large Head Locating Pins - Round or diamond shaped head, tapered tip, straight shank.
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Days to Ship: | 7 Days or more |
---|
Large Head Locating Pins - Round or diamond shaped head, tapered tip, internally threaded shank.
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Days to Ship: | 7 Days or more |
---|
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Days to Ship: | 7 Days or more |
---|
Large Head Locating Pins - Round or diamond shaped head, tapered tip and internally threaded shank.
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Days to Ship: | Same day or more |
---|
Show Stock Products
Small Head Locating Pins - Round or diamond shaped head, tapered tip and straight shank.
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Days to Ship: | Same day or more |
---|
Show Stock Products
Large Head Locating Pins - Round or diamond shaped head with tapered tip and stepped shank.
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Days to Ship: | 9 Days or more |
---|
Large Head Locating Pins in Inches - Round or diamond head, tapered tip, straight shank.
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is selectable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
Days to Ship: | 25 Days or more |
---|
MISUMI
The dimensions of this model are in inches. The head is selectable between 4 tips: conical, R-point, spherical and flat. Available materials are tool steel and 304 stainless steel. Configurable values are P, L, B, H, T and E.
Days to Ship: | 10 Days or more |
---|
MISUMI
Has the head newly shaped (No Edge). Such reshaping prevents the located object from being damaged. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Days to Ship: | 10 Days or more |
---|
Large Head Locating Pins - Round or diamond shaped head, spherical tip, internally threaded shank.
MISUMI
Has the Sphere-shaped head with no edge. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Days to Ship: | 7 Days or more |
---|
Large Head Locating Pins - Round or diamond shaped head, spherical tip, straight shank.
MISUMI
Has the Sphere-shaped head with no edge. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Days to Ship: | 7 Days or more |
---|
Shoulder Locating Pins - Round or diamond shaped head, shank type and tip selectable.
MISUMI
Locating Pins with 3 types of tip shape selectable.
Days to Ship: | 10 Days or more |
---|
Large Head Locating Pins - Round or diamond shaped head, selectable tip type and straight shank.
MISUMI
Locating Pins with 3 types of tip shape selectable.
Days to Ship: | 7 Days or more |
---|
Large Head Locating Pins - Round head, tapered tip and straight shank, P/B/D/D/R/E/L configurable.
MISUMI
Has the head newly shaped (No Edge). Such reshaping prevents the located object from being damaged. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Days to Ship: | 10 Days or more |
---|
Small Diameter Straight Locating Pins - Tip type selectable.
MISUMI
Locating pins with �4 or less pin diameter. Selectable from 4 different tip shapes.
Days to Ship: | 9 Days or more |
---|
Show Stock Products
Large Head Locating Pins - Round head, flat tip, internally threaded shank.
MISUMI
Has the typically shaped head (Flat).
Days to Ship: | 7 Days or more |
---|
Large Head Locating Pins in Inches - Round or diamond head, ball point, straight shank.
MISUMI
The dimensions of this model are in inches. The head can be selected from round or diamond. P dimension is configurable, from 0.1875 to 0.625 in 0.0005 increments. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
Days to Ship: | 8 Days or more |
---|
Large Head Locating Pins - Round head, flat tip, straight shank.
MISUMI
Has the typically shaped head (Flat).
Days to Ship: | 7 Days or more |
---|
MISUMI
Shouldered Locating Pins with the taper-shaped head
Days to Ship: | 9 Days or more |
---|
Large Head Locating Pins - Round or diamond shaped head, spherical tip and straight shank.
MISUMI
Has the Sphere-shaped head with no edge. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Days to Ship: | 7 Days or more |
---|
MISUMI
Has the Sphere-shaped head with no edge. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Days to Ship: | 7 Days or more |
---|
MISUMI
Locating Pins with 3 types of tip shape selectable.
Days to Ship: | 7 Days or more |
---|
MISUMI
Locating Pins with 3 types of tip shape selectable.
Days to Ship: | 7 Days or more |
---|
MISUMI
•Shape: Large Head
•Head Dia. Tolerance: 0/-0.01
•Head Shape: Round
•Head Tip Shape: Round Tapered
•Shank Style: Tapped
Days to Ship: | 8 Days or more |
---|
Large Head Locating Pins - Round or diamond shaped head, tapered tip and externally threaded shank.
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Days to Ship: | 7 Days or more |
---|
Shoulder Locating Pins - Round or diamond shaped head, tapered tip and internally threaded shank.
MISUMI
Shouldered Locating Pins with the taper-shaped head
Days to Ship: | 7 Days or more |
---|
Large Head Locating Pins - Round head, selectable tip angle and type, externally threaded shank.
MISUMI
Locating Pins with 3 types of tip shape selectable.
Days to Ship: | 7 Days or more |
---|
Large Head Locating Pins in Inches - Round head, flat tip, straight shank.
MISUMI
The dimensions of this model are in inches. The head is round. P dimension is selectable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
Days to Ship: | 25 Days or more |
---|
Large Head Locating Pins - Round/diamond head, tapered tip, straight shank, selectable tolerances.
MISUMI
The straight shank is used for press fit. Head and shank diameter tolerance is selectable from m6, p6, g6, h7 or (0 to -0.01). Pin material is hardened Stainless Steel (35HRC). The P/L/B dimensions are configurable in high precision ranges.
Days to Ship: | 10 Days or more |
---|
MISUMI
Nonmagnetic (Aluminum) locating pins. Usable without magnetic effects to surroundings.
Days to Ship: | 10 Days or more |
---|
MISUMI
Has the Sphere-shaped head with no edge. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Days to Ship: | 7 Days or more |
---|
MISUMI
Shouldered Locating Pins with the taper-shaped head
Days to Ship: | 9 Days or more |
---|
Large Head Locating Pins - Round head, tapered tip and internally threaded shank.
MISUMI
•Shape: Large Head
•Head Dia. Tolerance: 0/-0.01
•Shank Dia. Tolerance: g6
•Head Shape: Round
•Head Tip Shape: Tapered
Days to Ship: | 9 Days or more |
---|
Shoulder Locating Pins - Round head, tapered tip, externally threaded shank.
MISUMI
Locating pin with a long conical part. The workpiece can be received by the collet and the base will not be damaged. Options available in tool steel or stainless steel, additionally hardened heat treatment and/or hard chrome surface treatment can be configured. Clamping is by means of press fit. External thread can be selected in sizes from M3 to M10.
Days to Ship: | 9 Days or more |
---|
Small Head Locating Pins - Round or diamond shaped head, with spherical tip and straight shank.
MISUMI
Has the Sphere-shaped head with no edge. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Days to Ship: | 7 Days or more |
---|
Small Head Locating Pins - Round head with flat tip and straight shank.
MISUMI
Has the typically shaped head (Flat).
Days to Ship: | 7 Days or more |
---|
Small Head Locating Pins - Round or diamond shaped head, tapered tip and internally threaded shank.
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Days to Ship: | 7 Days or more |
---|
MISUMI
Has the Sphere-shaped head with no edge. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Days to Ship: | Same day or more |
---|
Show Stock Products
Small Head Locating Pins in Inches - Round or diamond head, tapered tip, straight shank.
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is selectable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
Days to Ship: | 25 Days or more |
---|
Large Head Locating Pins - Round or diamond shaped head, tapered tip, externally threaded shank.
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Days to Ship: | 7 Days or more |
---|
Large Head Locating Pins - Round head, tapered tip, externally threaded shank.
MISUMI
Has the head newly shaped (No Edge). Such reshaping prevents the located object from being damaged. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Days to Ship: | 10 Days or more |
---|
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Days to Ship: | 10 Days or more |
---|
Small Head Locating Pins - Round head with flat tip and internally threaded shank.
MISUMI
Has the typically shaped head (Flat).
Days to Ship: | 7 Days or more |
---|
MISUMI
Has the head newly shaped (No Edge). Such reshaping prevents the located object from being damaged. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Days to Ship: | 10 Days or more |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Basic Shape |
Head Shape |
Head Tip Shape |
Drive |
Shank Style |
Material |
Heat Treatment |
Surface Finish |
Head Diameter(mm) |
Head Diameter(Inch) |
Head Dia. Tolerance |
Shank Diameter(mm) |
Shank Diameter(Inch) |
Shank Dia. Tolerance |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
Product Series | Large Head Locating Pins - Round or diamond shaped head, tapered tip and straight shank. | Large Head Locating Pins - Round or diamond shaped head, tapered tip, straight shank. | Large Head Locating Pins - Round or diamond shaped head, tapered tip, internally threaded shank. | Large Head Locating Pins - Round or diamond shaped head, tapered tip and internally threaded shank. | Small Head Locating Pins - Round or diamond shaped head, tapered tip and straight shank. | Large Head Locating Pins - Round or diamond shaped head with tapered tip and stepped shank. | Large Head Locating Pins in Inches - Round or diamond head, tapered tip, straight shank. | Large Head Locating Pins - Round or diamond shaped head, spherical tip, internally threaded shank. | Large Head Locating Pins - Round or diamond shaped head, spherical tip, straight shank. | Shoulder Locating Pins - Round or diamond shaped head, shank type and tip selectable. | Large Head Locating Pins - Round or diamond shaped head, selectable tip type and straight shank. | Large Head Locating Pins - Round head, tapered tip and straight shank, P/B/D/D/R/E/L configurable. | Small Diameter Straight Locating Pins - Tip type selectable. | Large Head Locating Pins - Round head, flat tip, internally threaded shank. | Large Head Locating Pins in Inches - Round or diamond head, ball point, straight shank. | Large Head Locating Pins - Round head, flat tip, straight shank. | Large Head Locating Pins - Round or diamond shaped head, spherical tip and straight shank. | Large Head Locating Pins - Round or diamond shaped head, tapered tip and externally threaded shank. | Shoulder Locating Pins - Round or diamond shaped head, tapered tip and internally threaded shank. | Large Head Locating Pins - Round head, selectable tip angle and type, externally threaded shank. | Large Head Locating Pins in Inches - Round head, flat tip, straight shank. | Large Head Locating Pins - Round/diamond head, tapered tip, straight shank, selectable tolerances. | Large Head Locating Pins - Round head, tapered tip and internally threaded shank. | Shoulder Locating Pins - Round head, tapered tip, externally threaded shank. | Small Head Locating Pins - Round or diamond shaped head, with spherical tip and straight shank. | Small Head Locating Pins - Round head with flat tip and straight shank. | Small Head Locating Pins - Round or diamond shaped head, tapered tip and internally threaded shank. | Small Head Locating Pins in Inches - Round or diamond head, tapered tip, straight shank. | Large Head Locating Pins - Round or diamond shaped head, tapered tip, externally threaded shank. | Large Head Locating Pins - Round head, tapered tip, externally threaded shank. | Small Head Locating Pins - Round head with flat tip and internally threaded shank. | ||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Days to Ship |
Same day or more
Show Stock Products | 7 Days or more | 7 Days or more | 7 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 9 Days or more | 25 Days or more | 10 Days or more | 10 Days or more | 7 Days or more | 7 Days or more | 10 Days or more | 7 Days or more | 10 Days or more |
9 Days or more
Show Stock Products | 7 Days or more | 8 Days or more | 7 Days or more | 9 Days or more | 7 Days or more | 7 Days or more | 7 Days or more | 7 Days or more | 8 Days or more | 7 Days or more | 7 Days or more | 7 Days or more | 25 Days or more | 10 Days or more | 10 Days or more | 7 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 7 Days or more | 7 Days or more | 7 Days or more |
Same day or more
Show Stock Products | 25 Days or more | 7 Days or more | 10 Days or more | 10 Days or more | 7 Days or more | 10 Days or more |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Basic Shape | Large Head | Large Head | Large Head | Small Head | Large Head | Small Head | Large Head / Small Head | Large Head | Shouldered | Large Head | Large Head | Large Head | Shouldered | Large Head | Large Head | Straight / With Air Vent | Large Head | Large Head | Large Head | Shouldered | Large Head | Small Head | Large Head | Large Head / Straight | Large Head | Large Head | Large Head / Small Head / Shouldered | Large Head | Large Head | Large Head | Large Head | Small Head | Shouldered | Large Head | Shouldered | Small Head | Small Head | Small Head | Large Head | Small Head | Large Head | Large Head | Large Head / Small Head | Small Head | Small Head |
Head Shape | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round | Round | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round / Diamond | Round | Round |
Head Tip Shape | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Round Tapered | Tapered / Taper R / Spherical / Flat | Round Tapered | Spherical | Spherical | Tapered / Taper R / R | Tapered / Taper R / R | Round Tapered | Tapered / Taper R / Spherical / Flat | Flat | Spherical | Flat | Tapered | Spherical | Spherical | Tapered / Taper R / R | Tapered / Taper R / R | Round Tapered | Tapered | Tapered | Taper R / R | Flat | Tapered | Tapered | Spherical | Tapered | Tapered | Tapered | Spherical | Flat | Tapered | Spherical | Round Tapered | Tapered | Round Tapered | Tapered | Flat | Round Tapered |
Drive | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None / Flathead Slot | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None |
Shank Style | Straight (Press-fit) | Straight (Press-fit) | Tapped | Tapped | Tapped | Straight (Press-fit) | - | - | Threaded | Threaded | Tapped | Straight (Press-fit) | Straight (Press-fit) / Tapped / Threaded | Straight (Press-fit) | Straight (Press-fit) | Straight (Press-fit) | Tapped | - | Straight (Press-fit) | Threaded | Straight (Press-fit) | Tapped | Threaded | Tapped | Tapped | Threaded | Tapped | Threaded | - | Straight (Press-fit) | Tapped | Tapped | Tapped | Tapped | Threaded | Straight (Press-fit) | Straight (Press-fit) | Tapped | Tapped | - | Threaded | Threaded | Notch | Tapped | Straight (Press-fit) |
Material | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Aluminum | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel |
Heat Treatment | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened / Immersion Quenching | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Immersion Quenching | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Immersion Quenching | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Immersion Quenching |
Surface Finish | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating | None | None | None / Hard Chrome Plating / Buffed Surface / Hard Chrome Plating + Buffed Surface | None / Hard Chrome Plating / Buffed Surface / Hard Chrome Plating + Buffed Surface | None / Hard Chrome Plating / Buffed Surface / Hard Chrome Plating + Buffed Surface | None / Black Oxide / Hard Chrome Plating | None / Black Oxide / Hard Chrome Plating | None / Hard Chrome Plating / Buffed Surface / Hard Chrome Plating + Buffed Surface | None | None / Hard Chrome Plating | None | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating / Buffed Surface / Hard Chrome Plating + Buffed Surface | None / Hard Chrome Plating | None / Black Oxide / Hard Chrome Plating | None / Black Oxide / Hard Chrome Plating | None | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Black Oxide / Hard Chrome Plating | None | None | Clear Anodize | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating / Buffed Surface / Hard Chrome Plating + Buffed Surface | None | None / Hard Chrome Plating | None / Hard Chrome Plating / Buffed Surface | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating / Buffed Surface / Hard Chrome Plating + Buffed Surface |
Head Diameter(mm) | 1.2 ~ 30 | 1 ~ 30 | 5 ~ 30 | 3 ~ 20 | 5.5 ~ 30 | 1 ~ 20 | 2 ~ 30 | - | 1 ~ 7 | 3.5 ~ 30 | 5 ~ 30 | 1 ~ 30 | 2.5 ~ 22 | 2.5 ~ 30 | 2 ~ 30 | - | 6.5 ~ 30 | - | 1.5 ~ 30 | 2 ~ 20 | 1.5 ~ 30 | 3 ~ 20 | 4 ~ 30 | 6 ~ 35 | 6 ~ 15 | 3 ~ 30 | 3 ~ 20 | 4 ~ 30 | - | 2.5 ~ 10 | 6.5 ~ 25 | 4 ~ 20 | 3 ~ 20 | 6.5 ~ 13 | 2 ~ 11 | 1 ~ 20 | 1.5 ~ 20 | 3 ~ 20 | 5.5 ~ 30 | - | 3.5 ~ 30 | 4 ~ 30 | 5 ~ 30 | 4 ~ 20 | 2 ~ 20 |
Head Diameter(Inch) | - | - | - | - | - | - | - | 1/2 ~ 9/16 | - | - | - | - | - | - | - | - | - | 0.1875 ~ 0.625 | - | - | - | - | - | - | - | - | - | - | 1/2 ~ 9/16 | - | - | - | - | - | - | - | - | - | - | 1/4 ~ 5/16 | - | - | - | - | - |
Head Dia. Tolerance | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 |
Shank Diameter(mm) | 1 ~ 20 | 1 ~ 20 | 5 ~ 20T | 5 ~ 20 | 5 ~ 20T | 2 ~ 20 | 6 ~ 20 | - | 2 ~ 4 | 3 ~ 20 | 5 ~ 20T | 1 ~ 20 | 2 ~ 20 | 2 ~ 20 | 2 ~ 20 | - | 6 ~ 20T | - | 1 ~ 20 | 3 ~ 20 | 1 ~ 20 | 5 ~ 20T | 3 ~ 20 | 6 ~ 20T | 5 ~ 10 | 3 ~ 20 | 5 ~ 20T | 3 ~ 20 | - | 2 ~ 8 | 6 ~ 16 | 6 ~ 20 | 5 ~ 20 | 6 ~ 10 | 3 ~ 10 | 2 ~ 20 | 2 ~ 20 | 5 ~ 20T | 5 ~ 20T | - | 3 ~ 20 | 3 ~ 20 | 6 ~ 20 | 6 ~ 20 | 3 ~ 20 |
Shank Diameter(Inch) | - | - | - | - | - | - | - | 1/2 ~ 5/16 | - | - | - | - | - | - | - | - | - | 1/2 ~ 5/16 | - | - | - | - | - | - | - | - | - | - | 1/2 ~ 5/16 | - | - | - | - | - | - | - | - | - | - | 1/2 ~ 5/16 | - | - | - | - | - |
Shank Dia. Tolerance | g6 ~ p6 | 0/-0.005 ~ h7 | g6 ~ h7 | g6 ~ h7 | g6 | m6 ~ p6 | g6 | 0/-0.01 | 0/-0.005 | 0/-0.005 ~ h7 | g6 ~ h7 | 0/-0.005 ~ h7 | g6 ~ m6 | m6 ~ p6 | 0/-0.005 ~ h7 | - | g6 ~ h7 | 0/-0.01 | 0/-0.005 ~ h7 | g6 | m6 ~ p6 | g6 | g6 | g6 | 0.012/0.007 ~ g6 | g6 | g6 | g6 | 0/-0.01 | g6 ~ h7 | g6 | g6 ~ h7 | g6 | g6 | g6 | 0/-0.005 ~ h7 | 0/-0.005 ~ h7 | g6 | g6 | 0/-0.01 | 0/-0.005 ~ h7 | g6 | g6 | g6 ~ h7 | 0/-0.005 ~ h7 |
Loading...
[0.036-0.109/0.001Inch Unit(s)][0.0935-0.6875/0.0005Inch Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy