(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Locating Pins（Material：Stainless Steel Page3）
Basic Shape
-
Large Head -
Small Head -
Straight / With Air Vent -
Shouldered -
Screw Mount -
Flanged -
2-Stepped -
Straight
-
Shoulder Locating Pins - Round or diamond shaped head, tapered tip and straight shank.
MISUMI
Shouldered Locating Pins with the taper-shaped head
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Large Head Locating Pins - Round shaped head, flat tip with groove, externally threaded shank.
MISUMI
Thanks to the slot in the tip of this model, it can be easily installed with a screwdriver. Options available in stainless steel or carbon steel, additionally a hardened heat treatment and/or electrolytic nickel plating surface treatment can be configured. P/B dimensions configurable in 0.01mm intervals. Shank thread can be selected from M2 to M10.
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 7 Days or more -
Locating Pins - Round head, flat tip with screw mounting hole and straight shank.
MISUMI
This type of locating pin fixes the pin body with a screw. As the screw can be tightened from the top of the part, it can be used in places where screws cannot be used from the rear. Options available in tool steel or stainless steel, additionally a hardened heat treatment and/or hard chrome surface treatment can be configured.
- Volume Discount
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Eccentric Head Locating Pins - Flat tip with screw mounting hole, optional shank.
MISUMI
The straight shank is optional, the standard model has no shank. This type of locating pins can be used when the mounting location and positioning location have different hole positions. Options available in tool steel or stainless steel, additionally a hardened heat treatment and/or hard chrome surface treatment can be configured.
- Volume Discount
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Large Head Locating Pins - Triangular or round head, tapered tip and straight shank.
MISUMI
•Shape: Large Head
•Head Dia. Tolerance: 0/-0.01
•Shank Dia. Tolerance: m6
•Head Tip Shape: Tapered
•Shank Style: Straight (Press-fit)- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Small Head Locating Pins with Shoulder - Round head, selectable tip, straight shank.
MISUMI
Locating pins with �4 or less pin diameter. Head prevents pin from sliding out. Selectable from 3 different tip shapes.
[FY22 new product]
・Added material "Equivalent to W1-9 Tool Steel" as a standard option- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P, L and B dimensions are configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
Large Head Locating Pins in Inches - Round or diamond head, tapered tip, internally threaded shank.
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is selectable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- Volume Discount
- INCH
Days to Ship: 25 Days or more -
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
Large Head Locating Pins in Inches - Round head, flat tip, straight shank, configurable P dimension.
MISUMI
The dimensions of this model are in inches. The head is round. P dimension is configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
Large Head Locating Pins in Inches - Round or diamond head, tapered tip, externally threaded shank.
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 9 Days or more -
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P, L and B dimensions are configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
Small Head Locating Pins in Inches - Round or diamond head, tapered tip, straight shank.
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is selectable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- Volume Discount
- INCH
Days to Ship: 25 Days or more -
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
Inch Small Head Locating Pins - Round or diamond head, tapered tip, internally threaded shank.
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P, L and B dimensions are configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P, L and B dimensions are configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
Small Head Locating Pins in Inches - Round or diamond head, ball point, straight shank.
MISUMI
The dimensions of this model are in inches. The head can be selected from round or diamond. P dimension is configurable, from 0.0935 to 0.5 in 0.0005 increments. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P, L and B dimensions are configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
Inch Shoulder Locating Pins - Round or diamond head, straight shank, configurable P/L/B dimensions.
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P, L and B dimensions are configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
Inch Shoulder Locating Pins - Round or diamond head, tapered tip, internally threaded shank.
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is selectable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- Volume Discount
- INCH
Days to Ship: 25 Days or more -
MISUMI
The dimensions of this model are in inches. The head can be selected from round or diamond. The P dimension is configurable with values from 0.125 to 0.5155. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
MISUMI
Internally threaded bolts, available with round and diamond head, with configurable diameters and lengths. Options available in tool steel or stainless steel, additionally a hardened heat treatment can be configured.
- INCH
Days to Ship: 8 Days or more -
Large Head Locating Pins in Inches - Tapered and vented tip, externally threaded shank.
MISUMI
It has a groove along the pin, which is used to eliminate the vacuum when removing the pin. External threading configurable in sizes from #5-40 to 1/4-20. Options available in bearing steel or stainless steel. Selectable L dimension.
- Volume Discount
- INCH
Days to Ship: 16 Days or more -
Large Head Locating Pins in Inches - Tapered and round tip, straight shank.
MISUMI
Pilot pins are ideal in rotating mechanisms, their adjustment is by pressure. Options available in bearing steel or stainless steel. Dimension L selectable. P dimension configurable in 0.0005 increments.
- INCH
Days to Ship: 8 Days or more -
MISUMI
Pilot pins are ideal in rotating mechanisms, their adjustment is by internal thread. Options available in tool steel or stainless steel, additionally a hardened heat treatment can be configured. Dimension L selectable. P dimension configurable in 0.0005 intervals.
- INCH
Days to Ship: 8 Days or more -
MISUMI
Designed primarily to work with miniature components. Manufactured in resin with stainless steel core. Available with flat head, configurable diameter and length. Body material can be selected between phenolic or polyacetal. Configurable D and L dimensions.
- INCH
Days to Ship: 12 Days or more -
MISUMI
The externally threaded stem is held by a nut from the opposite side of the locating pin orientation. The pin material is hardened stainless steel (35HRC). P/L/B dimensions are configurable in high precision ranges.
- Spec Change
Days to Ship: 10 Days or more -
MISUMI
The internally threaded stem is held by screws from the opposite side of the locating pin orientation. The head and shank diameter tolerance is selectable from m6, p6, g6, h7 or (0 to -0.01). Pin material is hardened Stainless Steel (35HRC). The P/L/B dimensions are configurable in high precision ranges.
Days to Ship: 10 Days or more -
MISUMI
The straight shank is used for press fit and is selectable in m6 or p6 fit tolerances. The pin material is hardened stainless steel (35HRC). P/L/B dimensions are configurable in high precision ranges.
- Spec Change
Days to Ship: 10 Days or more -
MISUMI
The internally threaded stem is held by screws from the opposite side of the locating pin orientation. The pin material is hardened stainless steel (35HRC). P/L/B dimensions are configurable in high precision ranges.
- Spec Change
Days to Ship: 10 Days or more -
MISUMI
The externally threaded stem is held by a nut from the opposite side of the locating pin orientation. The head and shank diameter tolerance is selectable from m6, p6, g6, h7 or (0 to -0.01). Pin material is hardened Stainless Steel (35HRC). The P/L/B dimensions are configurable in high precision ranges.
Days to Ship: 10 Days or more -
MISUMI
The internally threaded stem is held by screws from the opposite side of the locating pin orientation. The head and shank diameter tolerance is selectable from m6, p6, g6, h7 or (0 to -0.01). Pin material is hardened Stainless Steel (35HRC). The P/L/B dimensions are configurable in high precision ranges.
Days to Ship: 10 Days or more -
Large Head Locating Pins - Round head, flat tip, straight shank (Hardened Stainless Steel).
MISUMI
The straight shank is used for press fit and is selectable in m6 or p6 fit tolerances. The pin material is hardened stainless steel (35HRC). P/L/B dimensions are configurable in high precision ranges.
- Spec Change
Days to Ship: 10 Days or more -
MISUMI
The externally threaded stem is held by a nut from the opposite side of the locating pin orientation. The pin material is hardened stainless steel (35HRC). P/L/B dimensions are configurable in high precision ranges.
- Spec Change
Days to Ship: 10 Days or more -
MISUMI
The internally threaded stem is held by screws from the opposite side of the locating pin orientation. The pin material is hardened stainless steel (35HRC). P/L/B dimensions are configurable in high precision ranges.
- Spec Change
Days to Ship: 10 Days or more -
MISUMI
Small head pin. The straight shank is used for press fit and is selectable in m6 or p6 fit tolerances. Pin material is hardened stainless steel (35HRC). P/L/B dimensions are configurable in high precision ranges.
- Spec Change
Days to Ship: 10 Days or more -
MISUMI
Small head pin. The internally threaded shank is held by screws from the opposite side of the locating pin orientation. Pin material is hardened stainless steel (35HRC). P/L/B dimensions are configurable in high precision ranges.
- Spec Change
Days to Ship: 10 Days or more -
Large Head Locating Pins - Round head, flat tip, straight shank.
MISUMI
Has the typically shaped head (Flat).
- Spec Change
- inCAD Components
Days to Ship: 9 Days or more -
Large Head Locating Pins - Round head, flat tip, internally threaded shank.
MISUMI
Has the typically shaped head (Flat).
- Spec Change
- inCAD Components
Days to Ship: 9 Days or more -
Large Head Side Locating Pins - Round head, flat tip, straight shank.
MISUMI
Has the typically shaped head (Flat).
- inCAD Components
Days to Ship: 10 Days or more -
Large Head Locating Pins - Round head, tapered tip and straight shank, P/B/D/D/R/E/L configurable.
MISUMI
Has the head newly shaped (No Edge). Such reshaping prevents the located object from being damaged. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
- Spec Change
- inCAD Components
Days to Ship: 10 Days or more -
MISUMI
Has the head newly shaped (No Edge). Such reshaping prevents the located object from being damaged. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
- Spec Change
- inCAD Components
Days to Ship: 10 Days or more -
Large Head Locating Pins - Round shaped head, tapered nylon tip and straight shank.
MISUMI
The straight shank is used for press fit. Nylon at the tip prevents scratching of the workpiece. Options available in tool steel or stainless steel, additionally configurable heat treatment: hardened. P, B and L parameters are configurable, D and shank tolerance are selectable.
- Spec Change
- inCAD Components
Days to Ship: 10 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Basic Shape |
| Head Shape |
| Head Tip Shape |
| Drive |
| Shank Style |
| Material |
| Heat Treatment |
| Surface Finish |
| Head Diameter(mm) |
| Head Diameter(Inch) |
| Head Dia. Tolerance |
| Shank Diameter(mm) |
| Shank Diameter(Inch) |
| Shank Dia. Tolerance |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Shoulder Locating Pins - Round or diamond shaped head, tapered tip and straight shank. | Large Head Locating Pins - Round shaped head, flat tip with groove, externally threaded shank. | Locating Pins - Round head, flat tip with screw mounting hole and straight shank. | Eccentric Head Locating Pins - Flat tip with screw mounting hole, optional shank. | Large Head Locating Pins - Triangular or round head, tapered tip and straight shank. | Small Head Locating Pins with Shoulder - Round head, selectable tip, straight shank. | Large Head Locating Pins in Inches - Round or diamond head, tapered tip, internally threaded shank. | Large Head Locating Pins in Inches - Round head, flat tip, straight shank, configurable P dimension. | Large Head Locating Pins in Inches - Round or diamond head, tapered tip, externally threaded shank. | Small Head Locating Pins in Inches - Round or diamond head, tapered tip, straight shank. | Inch Small Head Locating Pins - Round or diamond head, tapered tip, internally threaded shank. | Small Head Locating Pins in Inches - Round or diamond head, ball point, straight shank. | Inch Shoulder Locating Pins - Round or diamond head, straight shank, configurable P/L/B dimensions. | Inch Shoulder Locating Pins - Round or diamond head, tapered tip, internally threaded shank. | Large Head Locating Pins in Inches - Tapered and vented tip, externally threaded shank. | Large Head Locating Pins in Inches - Tapered and round tip, straight shank. | Large Head Locating Pins - Round head, flat tip, straight shank (Hardened Stainless Steel). | Large Head Locating Pins - Round head, flat tip, straight shank. | Large Head Locating Pins - Round head, flat tip, internally threaded shank. | Large Head Side Locating Pins - Round head, flat tip, straight shank. | Large Head Locating Pins - Round head, tapered tip and straight shank, P/B/D/D/R/E/L configurable. | Large Head Locating Pins - Round shaped head, tapered nylon tip and straight shank. | |||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 9 Days or more | 7 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 25 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 25 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 25 Days or more | 8 Days or more | 8 Days or more | 16 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 9 Days or more | 9 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||
| Basic Shape | Shouldered | Large Head | Screw Mount | Screw Mount | Large Head | Small Head / Shouldered | Large Head | Large Head | Large Head | Large Head | Large Head | Large Head | Large Head | Small Head | Small Head | Small Head | Small Head | Large Head | Small Head | Small Head | Large Head / Small Head / Shouldered | Small Head / Shouldered | Large Head / Small Head / Shouldered | Large Head / Small Head / Shouldered | Straight / With Air Vent | Screw Mount | Screw Mount | Straight / With Air Vent | Large Head | Large Head | Large Head | Large Head | Large Head | Large Head | Large Head | Large Head | Large Head | Small Head | Small Head | Large Head | Large Head | Large Head | Large Head | Large Head | Large Head |
| Head Shape | Round / Diamond | Round | Round | Round | Round / Triangle | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round | Round | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round | Round | Round / Diamond | Round / Diamond | Round | Round | Round | Round | Round | Round |
| Head Tip Shape | Tapered | Flat | Flat | Flat | Tapered | Tapered / Spherical / Flat | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Flat | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Spherical | Spherical | Spherical | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Flat | Tapered | Tapered | Spherical | Spherical | Spherical | Spherical | Flat | Flat | Flat | Tapered | Tapered | Flat | Flat | Flat | Round Tapered | Round Tapered | Tapered |
| Drive | None | Flathead Slot | With Screw Mount Hole | With Screw Mount Hole | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | Flathead Slot | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None |
| Shank Style | Straight (Press-fit) | Threaded | Straight (Press-fit) | Straight (Press-fit) | Straight (Press-fit) | Straight (Press-fit) | - | - | Tapped | Tapped | - | - | - | - | - | Tapped | Tapped | - | - | - | - | Tapped | Tapped | Tapped | - | - | Tapped | - | Threaded | Tapped | Straight (Press-fit) | Tapped | Threaded | Tapped | Straight (Press-fit) | Threaded | Tapped | Straight (Press-fit) | Tapped | Straight (Press-fit) | Tapped | Straight (Press-fit) | Straight (Press-fit) | Tapped | Straight (Press-fit) |
| Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Heat Treatment | Not Hardened / Hardened | Not Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened / Immersion Quenching | Not Hardened / Immersion Quenching | Not Hardened / Hardened |
| Surface Finish | None | None | None | None | None / Hard Chrome Plating | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None / Buffed Surface | None / Buffed Surface | None |
| Head Diameter(mm) | 1 ～ 20 | 3 ～ 15 | - | - | 2.5 ～ 13 | 1 ～ 3.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3.5 ～ 15 | 6.5 ～ 10 | 2.5 ～ 15 | 6.5 ～ 15 | 3.5 ～ 10 | 6.5 ～ 10 | 2.5 ～ 16 | 3.5 ～ 15 | 6.5 ～ 16 | 1 ～ 10 | 4 ～ 10 | 1.5 ～ 30 | 6.5 ～ 30 | 10 ～ 30 | 2 ～ 30 | 6 ～ 30 | 5.5 ～ 30 |
| Head Diameter(Inch) | - | - | - | - | - | - | 0.1875 ～ 0.625 | 0.1875 ～ 0.625 | 1/2 ～ 9/16 | 0.3125 ～ 0.625 | 0.156 ～ 0.6875 | 0.156 ～ 0.6875 | 0.156 ～ 0.6875 | 1/4 ～ 5/16 | 0.0935 ～ 0.5 | 0.1875 ～ 0.5 | 0.1875 ～ 0.5 | 0.1875 ～ 0.625 | 0.0935 ～ 0.5 | 0.0935 ～ 0.5 | 0.0935 ～ 0.5155 | 1/2 ～ 5/16 | 0.125 ～ 0.5155 | 0.125 ～ 0.5155 | 1/2 ～ 5/16 | 0.156 ～ 0.594 | 0.25 ～ 0.594 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Head Dia. Tolerance | 0/-0.01 | g6 | 0.02/0 | - | 0/-0.01 | 0/-0.01 ～ 0.005/0 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 ～ h7 | 0/-0.01 | 0/-0.01 | 0/-0.01 ～ h7 | 0/-0.01 ～ h7 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 ～ h7 | 0/-0.01 ～ h7 | 0/-0.01 | 0/-0.01 ～ h7 | 0/-0.01 ～ h7 | 0/-0.01 |
| Shank Diameter(mm) | 2 ～ 20 | - | 6 ～ 25 | 10 ～ 40 | 2 ～ 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3 ～ 8 | 6 ～ 8 | 2 ～ 8 | 6 ～ 8 | 3 ～ 8 | 6 ～ 8 | 2 ～ 8 | 3 ～ 8 | 6 ～ 8 | 3 ～ 10 | 6 ～ 10 | 1 ～ 20 | 6 ～ 20T | 6 ～ 20 | 2 ～ 20 | 6 ～ 20T | 5 ～ 20 |
| Shank Diameter(Inch) | - | - | - | - | - | - | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | - | 1/4 ～ 5/16 | 1/4 ～ 5/16 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shank Dia. Tolerance | m6 | - | g6 | ±0.2 ～ g6 | m6 | - | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | g6 | g6 ～ h7 | m6 ～ p6 | g6 | g6 ～ h7 | g6 ～ h7 | m6 ～ p6 | g6 | g6 | m6 ～ p6 | g6 | 0/-0.005 ～ h7 | g6 ～ h7 | m6 | 0/-0.005 ～ h7 | g6 ～ h7 | m6 ～ p6 |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Head Shape
-
Round -
Diamond -
Triangle
-
-
Head Tip Shape
-
Tapered -
Round Tapered -
Taper R -
R -
Spherical -
Flat -
Bullet Nose
-
-
Drive
-
None -
With Screw Mount Hole -
With Hex Socket -
With Wrench Hole -
Flathead Slot
-
-
Shank Style
-
Straight (Press-fit) -
Tapped -
Threaded -
Notch -
Set Screw Flat
-
-
Material
- Steel
- Stainless Steel
- Resin
- Aluminum
-
Heat Treatment
- Not Hardened
- Immersion Quenching
- Hardened
-
Surface Finish
- None
- Black Oxide
- Electroless Nickel
- Hard Chrome Plating
- Buffed Surface
- Hard Chrome Plating + Buffed Surface
- Clear Anodize
-
Metric / Inch
- metric
- inch
-
Head Diameter(mm)
-
Head Diameter(Inch)
[0.036-0.109/0.001Inch Unit(s)][0.0935-0.6875/0.0005Inch Unit(s)]
-
Head Dia. Tolerance
-
Shank Diameter(mm)
-
Shank Diameter(Inch)
-
Shank Dia. Tolerance
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 12 Days or Less
- 15 Days or Less
- 16 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy