(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Days to Ship: | 7 Days or more |
---|
Large Head Locating Pins - Round or diamond shaped head with tapered tip and stepped shank.
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Days to Ship: | 9 Days or more |
---|
Shoulder Locating Pins - Round or diamond shaped head, tapered tip and internally threaded shank.
MISUMI
Shouldered Locating Pins with the taper-shaped head
Days to Ship: | 10 Days or more |
---|
Small Head Locating Pins - Round or diamond shaped head, with spherical tip and straight shank.
MISUMI
Has the Sphere-shaped head with no edge. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Days to Ship: | 7 Days or more |
---|
Small Head Locating Pins - Round or diamond shaped head, tapered tip and straight shank.
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Days to Ship: | Same day or more |
---|
Show Stock Products
Small Head Locating Pins - Round head with flat tip and straight shank.
MISUMI
Has the typically shaped head (Flat).
Days to Ship: | 7 Days or more |
---|
Small Head Locating Pins - Round or diamond shaped head with tapered tip and straight shank.
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Days to Ship: | 7 Days or more |
---|
Small Head Locating Pins - Round or diamond shaped head, tapered tip and internally threaded shank.
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Days to Ship: | 7 Days or more |
---|
MISUMI
Small head pin. The internally threaded shank is held by screws from the opposite side of the locating pin orientation. Pin material is hardened stainless steel (35HRC). P/L/B dimensions are configurable in high precision ranges.
Days to Ship: | 10 Days or more |
---|
Small Head Locating Pins - Round or diamond shaped head, spherical tip and straight shank.
MISUMI
Has the Sphere-shaped head with no edge. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Days to Ship: | 7 Days or more |
---|
MISUMI
Has the Sphere-shaped head with no edge. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Days to Ship: | 7 Days or more |
---|
Inch Shoulder Locating Pins - Round or diamond head, tapered tip, straight shank.
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is selectable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
Days to Ship: | 25 Days or more |
---|
MISUMI
Has the Sphere-shaped head with no edge. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Days to Ship: | 7 Days or more |
---|
Small Head Locating Pins - Plastic, round head and selectable tip, straight shank with metal center.
MISUMI
Locating pins with �4 or less pin diameter. Selectable from 4 different tip shapes.
Days to Ship: | 10 Days or more |
---|
MISUMI
This is of the Sphere-shaped head with no edge.
Days to Ship: | 9 Days or more |
---|
Small Head Locating Pins - Round head, flat tip and internally threaded shank.
MISUMI
Has the typically shaped head (Flat).
Days to Ship: | 7 Days or more |
---|
Small Head Locating Pins in Inches - Round or diamond head, ball point, straight shank.
MISUMI
The dimensions of this model are in inches. The head can be selected from round or diamond. P dimension is configurable, from 0.0935 to 0.5 in 0.0005 increments. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
Days to Ship: | 8 Days or more |
---|
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P, L and B dimensions are configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
Days to Ship: | 8 Days or more |
---|
MISUMI
Internally threaded bolts, available with round and diamond head, with configurable diameters and lengths. Options available in tool steel or stainless steel, additionally a hardened heat treatment can be configured.
Days to Ship: | 8 Days or more |
---|
Small Diameter Locating Pins - Spring loaded, straight shank, round head.
MISUMI
Small Dia. Pin Units with spring-retained stroking pins.
Days to Ship: | 12 Days or more |
---|
MISUMI
Small head pin. The straight shank is used for press fit and is selectable in m6 or p6 fit tolerances. Pin material is hardened stainless steel (35HRC). P/L/B dimensions are configurable in high precision ranges.
Days to Ship: | 10 Days or more |
---|
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Days to Ship: | 10 Days or more |
---|
MISUMI
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Days to Ship: | 9 Days or more |
---|
Small Head Locating Pins - Round head with flat tip and internally threaded shank.
MISUMI
Has the typically shaped head (Flat).
Days to Ship: | 7 Days or more |
---|
MISUMI
Has the head newly shaped (No Edge). Such reshaping prevents the located object from being damaged. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Days to Ship: | 10 Days or more |
---|
MISUMI
Has the head newly shaped (No Edge). Such reshaping prevents the located object from being damaged. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Days to Ship: | 10 Days or more |
---|
Shoulder Locating Pins - Round head with flat tapered tip and straight shank.
MISUMI
Shouldered Locating Pins with the taper-shaped head
Days to Ship: | 9 Days or more |
---|
Small Head Locating Pins - Round head, flat tip and straight shank.
MISUMI
Has the typically shaped head (Flat).
Days to Ship: | 7 Days or more |
---|
Shoulder Locating Pins - Round or diamond shaped head, tapered tip and externally threaded shank.
MISUMI
Shouldered Locating Pins with the taper-shaped head
Days to Ship: | 9 Days or more |
---|
Small Head and Diameter Locating Pins - Round head, selectable tip and straight shank.
MISUMI
Locating pins with �4 or less pin diameter. Selectable from 4 different tip shapes.
Days to Ship: | 9 Days or more |
---|
Small Head Locating Pins - Plastic, selectable head and tip, straight shank.
MISUMI
Resin locating pins with small head. Used to avoid possible scratches. Tip type is selectable in 3 different options: conical, spherical or flat. The head shape is selectable between round or diamond. Different materials available such as polyacetal, MC nylon and PEEK. Configurable L/P/B dimensions.
Days to Ship: | 8 Days or more |
---|
Small Head Locating Pins - Polyacetal, round head and selectable tip, internally threaded shank.
MISUMI
Plastic Locating Pins which prevent workpiece damages.
Days to Ship: | 8 Days or more |
---|
Small Head Locating Pins with Shoulder - Round head, selectable tip, straight shank.
MISUMI
Locating pins with �4 or less pin diameter. Head prevents pin from sliding out. Selectable from 3 different tip shapes.
[FY22 new product]
・Added material "Equivalent to W1-9 Tool Steel" as a standard option
Days to Ship: | 9 Days or more |
---|
Small Head Locating Pins in Inches - Round or diamond head, tapered tip, straight shank.
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is selectable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
Days to Ship: | 25 Days or more |
---|
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
Days to Ship: | 8 Days or more |
---|
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P, L and B dimensions are configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
Days to Ship: | 8 Days or more |
---|
Inch Small Head Locating Pins - Round or diamond head, tapered tip, internally threaded shank.
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
Days to Ship: | 8 Days or more |
---|
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P, L and B dimensions are configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
Days to Ship: | 8 Days or more |
---|
Inch Shoulder Locating Pins - Round or diamond head, straight shank, configurable P dimension.
MISUMI
The dimensions of this model are in inches. The head can be selected from round or diamond. The P dimension is configurable with values from 0.0935 to 0.5155. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
Days to Ship: | 8 Days or more |
---|
Inch Shoulder Locating Pins - Round or diamond head, straight shank, configurable P/L/B dimensions.
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P, L and B dimensions are configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
Days to Ship: | 8 Days or more |
---|
Inch Shoulder Locating Pins - Round or diamond head, tapered tip, internally threaded shank.
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is selectable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
Days to Ship: | 25 Days or more |
---|
MISUMI
The dimensions of this model are in inches. The head can be selected from round or diamond. The P dimension is configurable with values from 0.125 to 0.5155. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
Days to Ship: | 8 Days or more |
---|
Small Diameter, Small Head Locating Pins - Spherical tip and straight shank.
MISUMI
Designed primarily to work with miniature components. Available with spherical head, configurable diameters and lengths. Options available in spring steel or stainless steel, additionally a hardened heat treatment can be configured. Configurable D/L/P/P/B sizes.
Days to Ship: | 12 Days or more |
---|
Small Head Locating Pins - Round head and straight shank.
MISUMI
The straight shank is used for press fit. Options available in 304 and 420 stainless steel, additionally configurable heat treatment: hardened. Configurable D, P and L parameters. RC alteration is available to make a rounding at the shank end.
Days to Ship: | 9 Days or more |
---|
Small Head Locating Pins - Spherical shaped head with straight and smooth shank.
MISUMI
The straight shank is used for press fit. Options available in 304 and 420 stainless steel, additionally configurable heat treatment: hardened. Configurable P and L parameters. M2 or M3 internal thread depending on the outside diameter of the shank.
Days to Ship: | 9 Days or more |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Basic Shape |
Head Shape |
Head Tip Shape |
Drive |
Shank Style |
Material |
Heat Treatment |
Surface Finish |
Head Diameter(mm) |
Head Diameter(Inch) |
Head Dia. Tolerance |
Shank Diameter(mm) |
Shank Diameter(Inch) |
Shank Dia. Tolerance |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||
Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
Product Series | Large Head Locating Pins - Round or diamond shaped head with tapered tip and stepped shank. | Shoulder Locating Pins - Round or diamond shaped head, tapered tip and internally threaded shank. | Small Head Locating Pins - Round or diamond shaped head, with spherical tip and straight shank. | Small Head Locating Pins - Round or diamond shaped head, tapered tip and straight shank. | Small Head Locating Pins - Round head with flat tip and straight shank. | Small Head Locating Pins - Round or diamond shaped head with tapered tip and straight shank. | Small Head Locating Pins - Round or diamond shaped head, tapered tip and internally threaded shank. | Small Head Locating Pins - Round or diamond shaped head, spherical tip and straight shank. | Inch Shoulder Locating Pins - Round or diamond head, tapered tip, straight shank. | Small Head Locating Pins - Plastic, round head and selectable tip, straight shank with metal center. | Small Head Locating Pins - Round head, flat tip and internally threaded shank. | Small Head Locating Pins in Inches - Round or diamond head, ball point, straight shank. | Small Diameter Locating Pins - Spring loaded, straight shank, round head. | Small Head Locating Pins - Round head with flat tip and internally threaded shank. | Shoulder Locating Pins - Round head with flat tapered tip and straight shank. | Small Head Locating Pins - Round head, flat tip and straight shank. | Shoulder Locating Pins - Round or diamond shaped head, tapered tip and externally threaded shank. | Small Head and Diameter Locating Pins - Round head, selectable tip and straight shank. | Small Head Locating Pins - Plastic, selectable head and tip, straight shank. | Small Head Locating Pins - Polyacetal, round head and selectable tip, internally threaded shank. | Small Head Locating Pins with Shoulder - Round head, selectable tip, straight shank. | Small Head Locating Pins in Inches - Round or diamond head, tapered tip, straight shank. | Inch Small Head Locating Pins - Round or diamond head, tapered tip, internally threaded shank. | Inch Shoulder Locating Pins - Round or diamond head, straight shank, configurable P dimension. | Inch Shoulder Locating Pins - Round or diamond head, straight shank, configurable P/L/B dimensions. | Inch Shoulder Locating Pins - Round or diamond head, tapered tip, internally threaded shank. | Small Diameter, Small Head Locating Pins - Spherical tip and straight shank. | Small Head Locating Pins - Spherical shaped head with straight and smooth shank. | |||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Days to Ship | 7 Days or more | 9 Days or more | 10 Days or more | 7 Days or more |
Same day or more
Show Stock Products | 7 Days or more | 7 Days or more | 7 Days or more | 10 Days or more | 7 Days or more | 7 Days or more | 25 Days or more | 7 Days or more | 10 Days or more | 9 Days or more | 7 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 10 Days or more | 10 Days or more | 9 Days or more | 7 Days or more | 10 Days or more | 10 Days or more | 9 Days or more | 7 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 25 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 25 Days or more | 8 Days or more | 12 Days or more | 9 Days or more | 9 Days or more |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Basic Shape | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head | Small Head |
Head Shape | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round | Round | Round | Round | Round / Diamond | Round | Round | Round | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round | Round |
Head Tip Shape | Tapered | Tapered | Tapered | Spherical | Tapered | Flat | Tapered | Tapered | Tapered | Spherical | Spherical | Round Tapered | Spherical | Spherical | Spherical | Flat | Spherical | Spherical | Round Tapered | Spherical | Tapered | Tapered | Tapered | Flat | Round Tapered | Round Tapered | Tapered | Flat | Tapered | Tapered / Taper R / Spherical / Flat | Tapered / Spherical / Flat | Spherical / Flat | Tapered / Spherical / Flat | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Spherical | Spherical | Spherical |
Drive | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None |
Shank Style | Tapped | - | Tapped | Straight (Press-fit) | Straight (Press-fit) | Straight (Press-fit) | Straight (Press-fit) | Tapped | Tapped | Straight (Press-fit) | Tapped | - | Tapped | Straight (Press-fit) | Notch | Tapped | - | - | Tapped | Straight (Press-fit) | Straight (Press-fit) | Notch | Set Screw Flat | Tapped | Straight (Press-fit) | Tapped | Straight (Press-fit) | Straight (Press-fit) | Threaded | Straight (Press-fit) | Straight (Press-fit) | Tapped | Straight (Press-fit) | - | - | - | Tapped | Tapped | - | - | Tapped | Tapped | - | Straight (Press-fit) | Tapped |
Material | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Resin | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Resin | Resin | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Stainless Steel |
Heat Treatment | Not Hardened / Hardened | Not Hardened / Hardened | Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Immersion Quenching | Not Hardened / Immersion Quenching | Not Hardened / Hardened | Not Hardened / Hardened | Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened |
Surface Finish | None / Hard Chrome Plating | None / Hard Chrome Plating | Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating | None | None / Hard Chrome Plating / Buffed Surface / Hard Chrome Plating + Buffed Surface | None / Hard Chrome Plating | None | None / Hard Chrome Plating | None | None / Hard Chrome Plating | None / Hard Chrome Plating | None | None | None | None | None | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating / Buffed Surface / Hard Chrome Plating + Buffed Surface | None / Hard Chrome Plating / Buffed Surface | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None |
Head Diameter(mm) | 3 ~ 20 | 2 ~ 30 | 4 ~ 20 | 1 ~ 20 | 1 ~ 20 | 1.5 ~ 20 | 1 ~ 20 | 3 ~ 20 | 4 ~ 10 | 1 ~ 20 | 3 ~ 20 | - | 4 ~ 20 | 1 ~ 2.9 | 5 ~ 30 | 4 ~ 20 | - | - | - | - | 1 ~ 10 | 5 ~ 30 | 5 ~ 30 | 4 ~ 20 | 2 ~ 20 | 4 ~ 20 | 1 ~ 20 | 1 ~ 20 | 2 ~ 20 | 0.5 ~ 2.99 | 1 ~ 10 | 3 ~ 25 | 1 ~ 3.5 | - | - | - | - | - | - | - | - | - | - | 1 ~ 4 | 2.5 ~ 4 |
Head Diameter(Inch) | - | - | - | - | - | - | - | - | - | - | - | 1/2 ~ 5/16 | - | - | - | - | 0.0935 ~ 0.5 | 0.0935 ~ 0.5 | 0.125 ~ 0.5155 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/4 ~ 5/16 | 0.0935 ~ 0.5 | 0.0935 ~ 0.5 | 0.1875 ~ 0.5 | 0.1875 ~ 0.5 | 0.0935 ~ 0.5155 | 0.0935 ~ 0.5155 | 1/2 ~ 5/16 | 0.125 ~ 0.5155 | 0.036 ~ 0.109 | - | - |
Head Dia. Tolerance | 0/-0.01 ~ h7 | 0/-0.01 | 0/-0.01 | 0/-0.01 ~ h7 | 0/-0.01 | 0/-0.01 ~ h7 | 0/-0.01 ~ h7 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 ~ h7 | 0/-0.01 | 0/-0.01 | h6 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 ~ h7 | 0/-0.01 ~ h7 | 0/-0.01 ~ h7 | 0/-0.01 ~ h7 | h6 | 0/-0.01 | 0/-0.01 ~ 0.005/0 | 0/-0.05 | 0/-0.3 | 0/-0.01 ~ 0.005/0 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 |
Shank Diameter(mm) | 5 ~ 20 | 6 ~ 20 | 6 ~ 20T | 2 ~ 20 | 2 ~ 20 | 2 ~ 20 | 2 ~ 20 | 5 ~ 20T | 6 ~ 10 | 2 ~ 20 | 5 ~ 20T | - | 6 ~ 20 | - | 6 ~ 20 | 6 ~ 20T | - | - | - | 5 | 3 ~ 10 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 3 ~ 20 | 6 ~ 20T | 2 ~ 20 | 2 ~ 20 | 3 ~ 20 | 0.51 ~ 3 | 2 ~ 10 | 6 ~ 25 | - | - | - | - | - | - | - | - | - | - | - | 2 ~ 6 | 5 ~ 6 |
Shank Diameter(Inch) | - | - | - | - | - | - | - | - | - | - | - | 1/2 ~ 5/16 | - | - | - | - | 1/2 ~ 5/16 | 1/2 ~ 5/16 | 1/2 ~ 5/16 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/2 ~ 5/16 | 1/2 ~ 5/16 | 1/2 ~ 5/16 | 1/2 ~ 5/16 | 1/2 ~ 5/16 | 1/2 ~ 5/16 | 1/2 ~ 5/16 | 1/2 ~ 5/16 | 1/2 ~ 5/16 | - | - | - |
Shank Dia. Tolerance | g6 ~ h7 | g6 | g6 | 0/-0.005 ~ h7 | m6 ~ p6 | 0/-0.005 ~ h7 | 0/-0.005 ~ h7 | g6 | g6 | m6 ~ p6 | g6 | 0/-0.01 | g6 ~ h7 | m6 | g6 | g6 | 0/-0.01 | 0/-0.01 | 0/-0.01 | - | m6 ~ p6 | g6 | g6 | g6 ~ h7 | 0/-0.005 ~ h7 | g6 ~ h7 | 0/-0.005 ~ h7 | m6 ~ p6 | g6 | 0/-0.01 ~ 0.005/0 | m6 | 0/-0.3 | - | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | m6 ~ p6 | g6 |
Loading...
[0.036-0.109/0.001Inch Unit(s)][0.0935-0.5155/0.0005Inch Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy