(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Junkosha Tubes & Tube Accessories
| Days to Ship |
|
|---|
-
Junkosha
By using a double tube with overlapped special resins that are flame resistant, sparks can be prevented. High flexibility, with excellent weather and water resistance.
[Features]
▪ Standard colors: black, red, blue, green, white, yellow, light beige, light red, light green (yellow, light beige, light red, light green with a 100-m roll only).
▪ The equipment can be implemented as a piping tube of spot welded equipment where noncombustible resin (exact UL94V-0) is used in the outer layer.
▪ By using the exclusively applied stripper (that comes with tube cutter), it is possible to insert the equipment into the Junlon one-touch fitting W series and it is also possible to detach the speedy outer layer that complies with the infixing.
▪ Moreover, the pitch of the infixing in the outer layer is displayed and the length of its detachment is easily visible.- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Polyurethane, for Barb Fitting, Junron UF, 25 Series
Junkosha
Mechanical strength, in particular wear resistance is excellent.
[Features]
· Excellent mechanical strengths (especially, pressure resistance and wear resistance).
· Product has superior low temperature and heat resistance properties.
· Temperature range of resin for continuous operation without load: -40°C ~ +80°C.
· Flexible and high impact resilience rate.
· No risk of poisonous substances being released.
· Minimum bending radius. Excellent workability.
· *If you need water resistance, use Junlon UF.- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Polyurethane, Soft, Junron UH, 30 Series
Junkosha
[Features]
· Excellent mechanical strengths (especially, pressure resistance and wear resistance).
· Product has superior low temperature and heat resistance properties.
· Temperature range of resin for continuous operation without load: -40°C ~ +80°C.
· Flexible and high impact resilience rate.
· No risk of poisonous substances being released.
· Minimum bending radius. Excellent workability.
Note: Use Junron UF when water resistance is required.- Volume Discount
Days to Ship: 8 Days or more -
Junkosha
Exhibits excellent durability against sparks and shocks generated from welding equipment. High flexibility, and with excellent weather and water resistance.
- Volume Discount
Days to Ship: 14 Days or more -
Junkosha
[Features]
· Product has superior low-temperature and heat-resistance properties.
· Non-load continuous operating temperature PFA < -65°C to +260°C, FEP < -65°C to +200°C.
· Inactive to most chemicals and solvents.
· Product has superior weather-resistance properties and does not deteriorate over time.
· Most substances are unlikely to adhere, and easy to remove if they do.
· Flame retardant.
· Superior electrical characteristics.
· No risk of poisonous substances being released.Days to Ship: 12 Days or more -
Tubing - PFA, Junflon Coil, FT Series
Junkosha
[Features]
·A fitting with a superior heat/low-temperature resistance.
· Non-load continuous operating temperatures: PFA < -65–260℃/FEP < -65–200℃.
· Inert to most of chemicals and solvents.
· This fitting has superior weather resistance and resistance to ageing.
· Adhesion-resistant and easy to keep clear.
· Flame retardant.
· Superior electrical characteristics.
· No risk of toxic substance elution.- Volume Discount
Days to Ship: 8 Days or more -
Tubing - PFA, Junflon Tube, TA Series
Junkosha
Excels in heat resistance and cold resistance. Inactive against most of chemicals and solvents. Highly weather resistant and does not deteriorate with time. Things are less likely to adhere on it, and will be easier to remove if they do.
Days to Ship: 13 Days or more -
Tubing - PFA, Junflon High-Barrier, TAH Series
Junkosha
A hybrid tube that uses a fluoropolymer PFA in the inner layer and the barrier properties of fluoropolymer in the outer layer. The wetted inner layer using semiconductor PFA, has high basic characteristics (purity, chemical/heat resistance, and antiadhesion) in semiconductor piping applications .
[Features]
· A fluoropolymer tube with superior barrier properties.
· A hybrid tube that uses fluoropolymer PFA in the inner layer and the barrier properties of fluoropolymer in the outer layer.
· The wetted inner layer using semiconductor PFA, has high basic characteristics (purity, chemical/heat resistance, and antiadhesion) in semiconductor piping applications .
· The barrier properties of the fluoropolymer is superior to the barrier properties of the acids (hydrochloric acid, nitric acid, etc.) and ammonia.
· Suppresses the permeation of acids in comparison to conventional PFA tubing.
· Reduces adverse environmental impacts on the wider environment.
· The transparency of the fluid can be maintained over a long period of time.
· The mechanical properties are equivalent to a conventional PFA tubing.
· This product is manufactured from raw material input to the molding and packaging in a consistently managed clean environment.- Volume Discount
Days to Ship: 14 Days or more -
Tubing - Nylon, Soft, Junron A, Control Tube, AC1 Series
Junkosha
Mechanical strength, in particular pressure resistance, wear resistance, flexural fatigue resistance is excellent. Excels in heat and low temperature resistance. High flexibility. Excels in oil resistance and chemical resistance (especially alkaline resistance). No risk of toxic substances being released.
- Volume Discount
Days to Ship: 14 Days or more -
Tubing - Nylon, Soft, Junron A, AS1 Series, Inch
Junkosha
Excellent mechanical strength, as well as pressure, wear resistance, and flexural fatigue resistance. Excels in heat and low temperature resistance. High flexibility. Excels in oil and chemical resistance (especially alkaline resistance). No risk of toxic substances being released.
- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Nylon, Soft, Junron A, AS1 Series, Metric
Junkosha
[Features]
· Excellent mechanical strengths (especially, pressure resistance, wear resistance and bending fatigue tolerance).
· Product has superior low temperature and heat resistance properties.
· Highly flexible.
· Product has superior oil resistance and chemical resistance properties (especially alkali resistance).
▪ No risk of toxic substances being released.
▪ It is light in weight and has excellent workability- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Nylon, Junron A, High-Pressure, AS2 Series
Junkosha
[Features]
· Excellent mechanical strength (pressure resistance, wear resistance, and bending fatigue tolerance).
· Highly flexible.
· Superior cold- and heat-resistance properties.
· Temperature range of resin for continuous operation without load: -40° to 93℃ with high flexibility.
· The product is highly oil and chemical resistant (displays high alkaline resistance in particular).
· No risk of poisonous substances being released.
· Lightweight and workable.- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Nylon, Super-Soft, Junron A, AS4 Series
Junkosha
[Features]
· Excellent mechanical strength (pressure resistance, wear resistance, and bending fatigue tolerance).
· Highly flexible.
· Superior cold- and heat-resistance properties.
· Temperature range of resin for continuous operation without load: -40° to 93℃ with high flexibility.
· The product is highly oil and chemical resistant (displays high alkaline resistance in particular).
· No risk of poisonous substances being released.
· Lightweight and workable.Days to Ship: 12 Days or more -
Tubing - Nylon, Coil, Junron AT, Female BSPT Fitting, FM Series
Junkosha
Features superior mechanical strength, including pressure, wear, and flexural fatigue resistance.
- Volume Discount
Days to Ship: 14 Days or more -
Tubing - Nylon, Coil, Junron AT, Male BSPT Fitting, FO Series
Junkosha
Features superior mechanical strength, including pressure, wear, and flexural fatigue resistance.
- Volume Discount
Days to Ship: 12 Days or more -
Tubing - Nylon, Coil, Junron AT, Female BSPT Fitting, M Series
Junkosha
Features superior mechanical strength, including pressure, wear, and flexural fatigue resistance.
- Volume Discount
Days to Ship: 12 Days or more -
Tubing - Nylon, Coil, Junron AT, Male BSPT Fitting, O Series
Junkosha
Features superior mechanical strength, including pressure, wear, and flexural fatigue resistance.
- Volume Discount
Days to Ship: 12 Days or more -
Tubing Accessories - Junron AT, Sleeve Fitting, S Series
Junkosha
Features superior mechanical strength, including pressure, wear, and flexural fatigue resistance.
- Volume Discount
Days to Ship: 14 Days or more -
Tubing - Nylon, Soft, Coil, Junron AT, AT1 Series
Junkosha
A soft or ultra-soft nylon tube is formed into a coil, producing superior spring properties. Mechanical strength, in particular pressure resistance, wear resistance, flexural fatigue resistance is excellent. Light with superior workability.
- Volume Discount
Days to Ship: 12 Days or more -
Tubing - Nylon, Super-Soft, Coil, Junron AT, AT4 Series
Junkosha
A soft or ultra-soft nylon tube is formed into a coil, producing superior spring properties. Mechanical strength, in particular pressure resistance, wear resistance, flexural fatigue resistance is excellent. Light with superior workability.
- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Polyurethane, Micro, Junron UF Series
Junkosha
Features superior mechanical strength, including wear resistance. Excels in heat and low-temperature resistance. Flexible, with high impact resilience.
- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Polyurethane, Soft, Water-Resistant, Junron UF, 25 Series
Junkosha
Excellent mechanical strength and wear resistance.
[Features]
· Excellent mechanical strength and pressure/wear resistance.
· Excellent performance at low and high temperatures.
· Resin continuous no-load operation temperature range: -40 ~ +80°C.
· Flexible and with a high impact resilience rate.
· No risk of poisonous substances being released.
· Minimal bending radius. Excellent workability.
· *For water resistance, please use Junlon UF.- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Polyurethane, Low-Friction, Junron UFL, 25L Series
Junkosha
Mechanical strength, and wear resistance in particular, is excellent. Excels in heat and low temperature resistance. Flexible, with high impact resilience.
Note: Use Junron UF when water resistance in particular is required.- Volume Discount
Days to Ship: 12 Days or more -
Tubing - Polyurethane, Super-Soft, Junron US, 15 Series
Junkosha
Features superior mechanical strength, including wear resistance. Excels in heat and low-temperature resistance. Flexible, with high impact resilience.
Note: Use Junron UF if water resistance is required.- Volume Discount
Days to Ship: 8 Days or more -
Tubing Accessories - Tube Cutter/Stripper Tool, Junron TS Series
Junkosha
[Features]
· The outer layer cover of SP4 sputter tubes can easily be delaminated by the insertion length of the Junlon one-touch fitting (W series).
· Tube cut mechanism means it can also be used as a tube cutter.- Volume Discount
Days to Ship: 12 Days or more -
Tubing Accessories - Tube Cutter/Stripper Tool, Junron TC Series
Junkosha
[Features]
· The outer layer cover of SP4 sputter tubes can easily be detached due to the insertion length of the Junlon one-touch W-series fitting.
· Also has a tube-cutting mechanism so you can use this as a tube cutter.- Volume Discount
Days to Ship: 12 Days or more -
Tubing - Fluoropolymer, Junron Hybrid, AP1 Series
Junkosha
The two-layer structure achieves higher levels of flexibility, kink resistance and wear resistance. Fluoride polymer for the inner layer provides superior repelling power against liquid chemicals. Layers are fully adhered because it is integrally molded.
- Volume Discount
Days to Ship: 12 Days or more -
Tubing - Fluoropolymer, UP1 Series
Junkosha
The 2-layer structure achieves higher levels of flexibility, kink resistance and wear resistance. Fluoride polymer for the inner layer provides superior repelling power against liquid chemicals. Layers are fully adhered because it uses integral molded.
- Volume Discount
Days to Ship: 12 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Type |
| Material |
| Cutting Service Usage |
| Color |
| O.D. [Distinction] |
| Applicable Fluid |
| O.D. D(Ø) |
| I.D. [Distinction] |
| I.D. d(Ø) |
| Number of Bores(per piece) |
| Material, Urethane |
| Material: Nylon |
| Material, Fluororesin |
| Operating Environment |
| O.D. (2nd Core) |
| O.D. (3rd Core) |
| O.D. (4th Core) |
| I.D. (2nd Core) |
| I.D. (3rd Core) |
| I.D. (4th Core) |
| Types of Related components |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha |
| Product Series | Tubing - Polyurethane, for Barb Fitting, Junron UF, 25 Series | Tubing - Nylon, Coil, Junron AT, Female BSPT Fitting, FM Series | Tubing - Nylon, Coil, Junron AT, Male BSPT Fitting, FO Series | Tubing - Nylon, Coil, Junron AT, Female BSPT Fitting, M Series | Tubing - Nylon, Coil, Junron AT, Male BSPT Fitting, O Series | Tubing - Polyurethane, Soft, Water-Resistant, Junron UF, 25 Series | Tubing Accessories - Tube Cutter/Stripper Tool, Junron TS Series | Tubing Accessories - Tube Cutter/Stripper Tool, Junron TC Series | ||||||||||||||||||||
| Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 14 Days or more | 12 Days or more | 8 Days or more | 13 Days or more | 14 Days or more | 14 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 14 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 14 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 8 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 12 Days or more |
| Type | Straight | Straight | Straight | Straight | Straight | Coil | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Related Components | Related Components | Related Components | Related Components | Related Components | Coil | Coil | Straight | Straight | Straight | Straight | Related Components | Related Components | Straight | Straight |
| Material | - | Urethane | Urethane | - | Fluororesin | Fluororesin | Fluororesin | Fluororesin | Nylon | Nylon | Nylon | Nylon | Nylon | - | - | - | - | - | Nylon | Nylon | Urethane | Urethane | Urethane | Urethane | - | - | Fluororesin | Fluororesin |
| Cutting Service Usage | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Color | Black / White / Red / Blue / Yellow / Green / Others | Blue | Black / Transparent (including non-white colors) / Red / Blue / Yellow / Green | White | Others | Others | Others | Others | Black | Black / Translucent White | Black / Translucent White / Red / Blue / Yellow / Green | Translucent White | Black / Translucent White | - | - | - | - | - | Orange | Black | Transparent (including non-white colors) | Black / White / Transparent (including non-white colors) / Red / Blue / Yellow / Green | Black / Translucent White / Blue | Black / Others | - | - | Translucent White | Translucent White |
| O.D. [Distinction] | ~6 ～ ~15 | ~4 ～ ~6 | ~4 ～ ~15 | ~6 ～ ~15 | ~6 ～ ~10 | ~4 ～ ~10 | ~10 | ~6 ～ ~30 | ~6 | ~4 ～ ~15 | ~4 ～ ~20 | ~4 ～ ~15 | ~6 ～ ~10 | - | - | - | - | - | ~8 ～ ~15 | ~4 ～ ~10 | ~2 ～ ~4 | ~4 ～ ~15 | ~4 ～ ~15 | ~4 ～ ~15 | - | - | ~4 ～ ~10 | ~4 ～ ~15 |
| Applicable Fluid | Water / Air | Water / Air | Air | Water / Air | Water / Air / Chemical / General Hydraulic Oil | Water / Air / Chemical / General Hydraulic Oil | Water / Air / Chemical / General Hydraulic Oil | Water / Air / Chemical | Water / Air / General Hydraulic Oil | Water / Air / General Hydraulic Oil | Water / Air / General Hydraulic Oil | Water / Air / General Hydraulic Oil | Water / Air / General Hydraulic Oil | - | - | - | - | - | Water / Air / General Hydraulic Oil | Water / Air / General Hydraulic Oil | Water / Air | Water / Air | Water / Air | Air | - | - | Water / Air / General Hydraulic Oil | Water / Air / General Hydraulic Oil |
| O.D. D(Ø) | 6 ～ 12 | 3.5 ～ 6 | 4 ～ 12 | 6 ～ 12 | 6 ～ 10 | 4 ～ 10 | 10 | 6 ～ 25.4 | 6 | 3.18 ～ 12.7 | 4 ～ 16 | 4 ～ 12 | 6 ～ 10 | - | - | - | - | - | 7.6 ～ 15 | 4 ～ 10 | 1.6 ～ 3.5 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | - | - | 4 ～ 10 | 4 ～ 12 |
| I.D. [Distinction] | ~4 ～ ~9 | ~2 ～ ~4 | ~3 ～ ~8 | ~4 ～ ~9 | ~4 ～ ~8 | ~2 ～ ~8 | ~8 | ~4 ～ ~30 | ~4 | ~3 ～ ~10 | ~3 ～ ~15 | ~3 ～ ~9 | ~4 ～ ~8 | - | - | - | - | - | ~6 ～ ~15 | ~3 ～ ~8 | 1 or Less ～ ~2 | ~3 ～ ~8 | ~3 ～ ~8 | ~3 ～ ~8 | - | - | ~3 ～ ~8 | ~3 ～ ~8 |
| I.D. d(Ø) | 4 ～ 9 | 2 ～ 3.5 | 2.5 ～ 8 | 4 ～ 9 | 4 ～ 8 | 2 ～ 8 | 8 | 3.95 ～ 22.2 | 4 | 2.36 ～ 9.56 | 2.5 ～ 13 | 2.5 ～ 9 | 4 ～ 7.5 | - | - | - | - | - | 6 ～ 12 | 2.5 ～ 7.5 | 0.8 ～ 2 | 2.5 ～ 8 | 2.5 ～ 8 | 2.5 ～ 8 | - | - | 2.5 ～ 8 | 2.5 ～ 8 |
| Number of Bores(per piece) | - | - | - | - | - | - | - | - | 1 ～ 12 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material, Urethane | - | Polyurethane | Polyurethane | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Polyurethane | Polyurethane | Polyurethane | Polyurethane | - | - | - | - |
| Material: Nylon | - | - | - | - | - | - | - | - | Soft Nylon | Soft Nylon | Soft Nylon | Pressure Resistant Nylon | Soft Nylon | - | - | - | - | - | Soft Nylon | Soft Nylon | - | - | - | - | - | - | - | - |
| Material, Fluororesin | - | - | - | - | Others | Others | Others | Others | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Others | Others |
| Operating Environment | Standard / Water Resistance / Weather Resistance | Standard / Heat Resistance / Abrasion Resistance / Low Temp. Resistance | Standard / Heat Resistance / Abrasion Resistance / Low Temp. Resistance | Standard / Water Resistance / Weather Resistance | Standard / Corrosion Resistant / Antistatic / Water Resistance / Heat Resistance / Oil Resistance / Low Temp. Resistance / Weather Resistance / Chemical Resistance | Standard / Corrosion Resistant / Antistatic / Water Resistance / Heat Resistance / Oil Resistance / Low Temp. Resistance / Weather Resistance / Chemical Resistance | Standard / Corrosion Resistant / Antistatic / Water Resistance / Heat Resistance / Oil Resistance / Low Temp. Resistance / Weather Resistance / Chemical Resistance | Standard / Corrosion Resistant / Water Resistance / Heat Resistance / Chemical Resistance | Standard / Pressure Resistance / Heat Resistance / Abrasion Resistance / Oil Resistance / Low Temp. Resistance / Chemical Resistance | Standard / Pressure Resistance / Heat Resistance / Abrasion Resistance / Oil Resistance / Low Temp. Resistance / Chemical Resistance | Standard / Pressure Resistance / Heat Resistance / Abrasion Resistance / Oil Resistance / Low Temp. Resistance / Chemical Resistance | Standard / Pressure Resistance / Heat Resistance / Abrasion Resistance / Oil Resistance / Low Temp. Resistance / Chemical Resistance | Standard / Pressure Resistance / Heat Resistance / Abrasion Resistance / Oil Resistance / Low Temp. Resistance / Chemical Resistance | - | - | - | - | - | Standard / Pressure Resistance / Abrasion Resistance | Standard | Standard / Heat Resistance / Abrasion Resistance / Low Temp. Resistance | Standard / Water Resistance / Heat Resistance / Abrasion Resistance / Low Temp. Resistance | Standard / Heat Resistance / Abrasion Resistance / Low Temp. Resistance | Standard / Heat Resistance / Abrasion Resistance / Low Temp. Resistance | - | - | Standard / Sputter Resistant / Water Resistance / Oil Resistance / Chemical Resistance | Standard / Water Resistance / Oil Resistance / Chemical Resistance |
| O.D. (2nd Core) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D. (3rd Core) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D. (4th Core) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| I.D. (2nd Core) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| I.D. (3rd Core) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| I.D. (4th Core) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Types of Related components | - | - | - | - | - | - | - | - | - | - | - | - | - | Fitting | Fitting | Fitting | Fitting | Sleeve | - | - | - | - | - | - | Tool for Peeling | Tube Cutter | - | - |
Loading...
Configure
Specification/Dimensions
-
Type
-
Straight
-
Flat
-
Coil
-
(Related Components) Tube Cutters
-
Related Components
-
Straight
-
Material
- Urethane
- Nylon
- Fluororesin
- Polyamide
- Fluororubber
- Silicon Rubber
- Polyolefin Resin
- Others
- PVC
- Polypropylene
-
Cutting Service Usage
- Yes
- No
-
Color
- Black
- White
- Translucent White
- Transparent (including non-white colors)
- Red
- Blue
- Yellow
- Green
- Orange
- Ocher
- Gray
- Multi Color
- Pink
- Others
- Brown
- Purple
- Silver
- Transparent Blue
-
O.D. [Distinction]
-
Applicable Fluid
- Water
- Air
- Chemical
- General Hydraulic Oil
- Thermal Media Oil
-
Metric / Inch
-
O.D. D(Ø)
- 0.090"
- 1/8"
- 5/32"
- 3/16"
- 0.205"
- 7/32"
- 1/4"
- 0.256"
- 5/16"
- 0.319"
- 3/8"
- 7/16"
- 0.441"
- 1/2"
- 17/32"
- 9/16"
- 0.579"
- 5/8"
- 11/16"
- 3/4"
- 13/16"
- 7/8"
- 1"
- 1-1/8"
- 1-1/4"
- 1-3/8"
- 1-1/2"
- 1-3/4"
- 2"
- 2-1/2"
- 3"
- 3-1/2"
- 1.6
- 1.7
- 1.8
- 10
- 10.2
- 10mm
- 11
- 11mm
- 12
- 12.2
- 12.5
- 12.7
- 12mm
- 13
- 13.5
- 13.5mm
- 13mm
- 14
- 14.2
- 14mm
- 15
- 16
- 16mm
- 17
- 18
- 18mm
- 2
- 2.5
- 20
- 22
- 23
- 24
- 25
- 25.4
- 26
- 28
- 29
- 3
- 3.17
- 3.18
- 3.2
- 3.5
- 34
- 35
- 4
- 4.5
- 4.76
- 42
- 47
- 48
- 4mm
- 5
- 5.95
- 52
- 57
- 5mm
- 6
- 6.35
- 62
- 7
- 7.6
- 7.85
- 7.94
- 7mm
- 8
- 8.2
- 8mm
- 9
- 9.53
- 9mm
-
I.D. [Distinction]
-
I.D. d(Ø)
-
Number of Bores(per piece)
-
Material, Urethane
-
Material: Nylon
-
Material, Fluororesin
-
Operating Environment
- Standard
- Clean Environment
- Corrosion Resistant
- Antistatic
- Sputter Resistant
- Mold Cooling
- Water Resistance
- Pressure Resistance
- For Vacuum
- Heat Resistance
- Abrasion Resistance
- Oil Resistance
- Low Temp. Resistance
- Weather Resistance
- Chemical Resistance
-
O.D. (2nd Core)
-
O.D. (3rd Core)
-
O.D. (4th Core)
-
I.D. (2nd Core)
-
I.D. (3rd Core)
-
I.D. (4th Core)
-
Types of Related components
Narrow search by specifying Manufacturer
-
- MISUMI (28)
- Chiyoda (33)
- USA Industrials (30)
- SMC (29)
- Junkosha (28)
- Nitta (22)
- Nihon Pisco (20)
- Iwata Manufacturing (10)
- Muromoto (8)
- CKD (2)
- Chukoh Chemical Industries (1)
- I.Field (1)
- Miruc Optical (1)
- Nichias (1)
- Trusco Nakayama (1)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy