(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
ANEX
•Standards for Tip Shape : Phillips (+) / Slotted (-)
•Phillips Tip Size (+) : No. 2
•Single Item / Set Classification : Single Item
•Shaft type : Round
•Magnet : None
For complete product overview and details on MINISTA 60, see the sections below:
Days to Ship: | 8 Days or more |
---|
Screw Removal Impact 7 Pc. Set
ANEX
[Features]
·Remove completely stripped Phillips screws, hexagon socket bolts, and setscrews by tapping them out.
·The sharp cutting edge bites into stripped screws.
·Impact driver (compact and lightweight type) that rotates when hit with a hammer.
·Non-slip elastomer resin handle.
·A 6.35 mm (1/4") socket wrench can also be attached.
Days to Ship: | 9 Days or more |
---|
Stubby Phosphorescent Screwdriver (Magnetic)
ANEX
[Features]
· Uses a special luminescent resin that glows in the dark. Screwdriver can be easily found even in dark places. (Emits light for 24 hours after being subjected to direct sunlight for 10 minutes)
· Made of martensitic special stainless steel (high strength stainless steel (550)).
Days to Ship: | 9 Days or more |
---|
"Superfit" ACR Heavy-Duty Screwdriver (Magnetic)
ANEX
•Standards for Tip Shape : Minus (-), Plus (+)
•Phillips Tip Size (+) : No. 1, No. 2, No. 3
•Single Item / Set Classification : Single Item
•Shaft type : Round
•Magnet : Included
•Shaft thru : Included
For complete product overview and details on Superfit ACR Heavy-Duty Screwdriver (Magnetic), see the sections below:
Days to Ship: | 9 Days or more |
---|
Stubby Phosphorescent Screwdriver (Stubby Type / Magnetic)
ANEX
[Features]
· Uses a special luminescent resin that glows in the dark. Screwdriver can be easily found even in dark places. (Emits light for 24 hours after being subjected to direct sunlight for 10 minutes)
· Martensitic special stainless steel (high strength stainless steel (550)).
Days to Ship: | 9 Days or more |
---|
Screwdrivers - Split Grip, Through-Hole, 9210
ANEX
•Standards for Tip Shape : Minus (-)
•Single Item / Set Classification : Single Item
•Shaft type : Round
•Magnet : None
•Shaft thru : Included
For complete product overview and details on Split Grip Screwdriver (Through), see the sections below:
Days to Ship: | 8 Days or more |
---|
ANEX
[Features]
· Convenient for dismantling clocks and spectacles, or rotating screws on precision devices, etc.
Days to Ship: | 8 Days or more |
---|
"Superfit" Precision Screwdriver
ANEX
[Features]
· Has a square cross-section to increase work efficiency.
· Soft grip is adopted.
Days to Ship: | 8 Days or more |
---|
Superfit Precision Hexalobular Screwdriver
ANEX
[Features]
· A high-strength type with an elastomer resin handle.
Days to Ship: | 8 Days or more |
---|
Superfit Precision Box Screwdriver
ANEX
[Features]
· A high-strength type with an elastomer resin handle.
Days to Ship: | 8 Days or more |
---|
ANEX
•Standards for Tip Shape : Combination, Hexagon
•Phillips Tip Size (+) : No. 1, No. 2, No. 3
•Single Item / Set Classification : Set Product
•Shaft type : Square
•Magnet : None
For complete product overview and details on Super Action Grip Screwdriver, see the sections below:
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Quick Ball 60 Ratchet Screwdriver (Magnetic)
ANEX
•Standards for Tip Shape : Phillips (+) / Slotted (-)
•Phillips Tip Size (+) : No. 2
•Single Item / Set Classification : Single Item
•Shaft type : Square
•Magnet : Included
For complete product overview and details on Quick Ball 60 Ratchet Screwdriver (Magnetic), see the sections below:
Days to Ship: | 8 Days or more |
---|
Screwdrivers - Offset Ratchet Type, 5-Bit/9-Bit, 425-B
ANEX
•Standards for Tip Shape : Combination, Phillips (+) / Slotted (-)
•Phillips Tip Size (+) : No. 1, No. 2, No. 3
•Single Item / Set Classification : Set Product
•Shaft type : Square
•Magnet : None
For complete product overview and details on Offset Ratchet Screwdriver, see the sections below:
Days to Ship: | 8 Days or more |
---|
ANEX
•Standards for Tip Shape : Minus (-), Plus (+)
•Phillips Tip Size (+) : No. 1, No. 2, No. 3
•Single Item / Set Classification : Single Item
•Shaft type : Square
•Magnet : None
For complete product overview and details on Impact Screwdriver Bit, see the sections below:
Days to Ship: | 8 Days or more |
---|
ANEX
[Features]
· It can be used to open small holes and as a tap holder in precision machining, building hobby items and many other applications.
Days to Ship: | 8 Days or more |
---|
Screwdriver with Anti-Drop Ring
ANEX
The cord does not tangle, even when the handle is turned by the rotating cap. With ring for attaching fall prevention cord. Ideal for work in high places.
Days to Ship: | 8 Days or more |
---|
"Compact Ratchet 52" (Straight Type)
ANEX
•Standards for Tip Shape : Combination
•Phillips Tip Size (+) : No. 1, No. 2, No. 3
•Single Item / Set Classification : Set Product
•Magnet : None
For complete product overview and details on Compact Ratchet 52 (Straight Type), see the sections below:
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 9 Days or more |
---|
Precision Pin Vise (Throughput Type)
ANEX
[Features]
· A pin vise resistant to wear with an iron cap and chuck.
Days to Ship: | 8 Days or more |
---|
Precision Pin Vise (Storable Type) with Drill
ANEX
[Features]
· A storage type pin vise ideal for drilling small holes and deburring.
Days to Ship: | 8 Days or more |
---|
Stepped Magnetic Catch MINI【2 Pieces Per Package】
ANEX
[Features]
· Firmly catches screws without dropping them due to the heavy duty magnet.
Days to Ship: | 9 Days or more |
---|
ANEX
[Features]
· Firmly catches screws without dropping them due to the heavy duty magnet.
Days to Ship: | 9 Days or more |
---|
ANEX
[Features]
· Ideal for removing watch strap spring bars (tongues).
Days to Ship: | 9 Days or more |
---|
Replacement Stubby Ratchet Screwdriver
ANEX
[Features]
· Rotates smoothly, with excellent workability.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Standards for Tip Shape |
Phillips Tip Size (+) |
Tip Size, Slotted (-) Blade Width (mm) B1 |
Shaft Length L (mm) |
Single Item / Set Classification |
Shaft Type |
Magnet |
Shaft Through |
Bolster |
Grip Type |
Tip Size, Slotted (-) Blade Thickness (mm) B2 |
(Box / Hexagonal / Ball Point) Two-sided Width Size (mm) |
(Box / Hexagonal / Ball Point) Two-sided Width Dimension (Inch) |
Brand | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | |||||||||||||||||||||||||
Days to Ship | 8 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 8 Days or more |
Standards for Tip Shape | Phillips (+) / Slotted (-) | - | Plus (+) | Plus (+) / Minus (-) | Minus (-) | Minus (-) | Phillips (+) / Slotted (-) / Others | Plus (+) | Torx | Box | Combination | Phillips (+) / Slotted (-) | Phillips (+) / Slotted (-) | Phillips (+) / Slotted (-) / Combination | Plus (+) | - | Plus (+) / Minus (-) | Combination | Plus (+) | Others | Others | Others | Others | Others | Phillips (+) / Slotted (-) |
Phillips Tip Size (+) | No. 2 | - | No. 2 | No. 2 / No. 3 | - | - | No.00 / No. 0 | No.000 | - | - | No. 1 / No. 2 / No. 3 | No. 1 / No. 2 / No. 3 | No. 2 | No. 1 / No. 2 / No. 3 | No. 2 | - | No. 2 | No. 1 / No. 2 / No. 3 | No. 0 | - | - | - | - | - | No. 2 |
Tip Size, Slotted (-) Blade Width (mm) B1 | 6 | - | - | 6 ~ 8 | 6 | 9.5 ~ 11 | 0.9 ~ 2.1 | - | - | - | 6 | 6 | 6 | 6 | - | - | 6 | 6 | - | - | - | - | - | - | 30 |
Shaft Length L (mm) | - | - | 100 | 100 ~ 150 | 35 | 150 ~ 200 | 10 ~ 24 | 75 | 30 | 40 | - | - | 95 | - | - | - | 100 | - | 50 | - | - | - | - | - | - |
Single Item / Set Classification | Single Item | - | Single Item | Single Item | Single Item | Single Item | Single Item / Set Product | Single Item | Single Item | Single Item | Set Product | Set Product | Single Item | Set Product | Single Item | Single Item | Single Item | Set Product | Single Item | Single Item | Set Product | Set Product | Single Item | Single Item | Single Item |
Shaft Type | Round | - | Round | Round | Round | Round | Round | Round | Round | Round | Square | Round | Square | Square | Square | - | Round | - | Round | Round | - | - | - | Round | Round |
Magnet | None | - | Included | Included | Included | None | None | None | None | None | None | None | Included | None | None | - | None | None | None | - | - | - | - | - | None |
Shaft Through | - | - | None | Included | None | Included | None | None | None | None | - | - | - | - | - | - | None | - | None | - | - | - | - | - | None |
Bolster | - | - | None | Attached | None | None | None | None | None | None | - | - | - | - | - | - | None | - | None | - | - | - | - | - | None |
Grip Type | Resin | - | Rubber | Rubber | Resin | Resin | Stainless | Rubber | Resin | Resin | Resin | Resin | Rubber | Stainless | - | Stainless | Rubber | Resin | Resin | - | - | - | - | - | Resin |
Tip Size, Slotted (-) Blade Thickness (mm) B2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 6 |
(Box / Hexagonal / Ball Point) Two-sided Width Size (mm) | - | - | - | - | - | - | - | - | - | 2 | 4 ~ 6 | - | - | 2.5 ~ 6 | - | - | - | 2.5 ~ 6 | - | - | - | - | - | - | - |
(Box / Hexagonal / Ball Point) Two-sided Width Dimension (Inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy