Vernier Calipers（Maximum Measuring Length (Adjustment Range)：201 ~ 300）

• 

  Centerline Caliper - Vernier, Round Hole Pitch, RM-DX

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the pitch between holes of the same diameter.
  · Capable of measuring pitches "between 2 equal-diameter holes" and from end surface to hole

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Vernier Caliper - With Scale, Silver Coated, THN

  Trusco Nakayama

  [Features]
  · Vernier integrated type, with a scale that is easier to read.
  · Silver finish.
  [Applications]
  · Exterior measurements, interior measurements, step measurements, depth measurements.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Vernier Caliper - Long Jaw Type for Large Diameters, LSM

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring diameters for spheres, pipes, etc.
  · Ideal for diameter measurement of large bore pipes, etc.

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Vernier Caliper - Fine Adjustment, Long Jaw Type, SCML

  NAKAMURASEISAKU

  [Features]
  · Reads the inside and outside measurement with high precision.
  · "Fine feed" provides high accuracy.
  · Vernier calibers that come in a vast variety of sizes.
  · Long jaw-type SCM

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Vernier Caliper - Standard Model, Stainless Steel, GVC

  NIIGATASEIKI

  •Model: Standard Calipers
  •Display Method: Vernier (Analog)
  •Depth Bar W/WO: Included
  •Dimension I (mm): 3.7
  •Dimension J (mm): 2±0.3

  • Volume Discount

  Days to Ship:	9 Days or more

• 

  Vernier Caliper - Fine Adjustment, M Type

  NIIGATASEIKI

  •Model: Standard Calipers
  •Display Method: Vernier (Analog)
  •Depth Bar W/WO: Included
  •Minimum Read Value (mm): 0.02

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Dial Caliper - Carbide-Tipped Measuring Face, DVC-2

  NIIGATASEIKI

  •Model: Standard Calipers
  •Display Method: Dial
  •Depth Bar W/WO: Included
  •Impermeability: Not Included
  •With / Without measurement data output terminal: Not Included

  • Volume Discount

  Days to Ship:	12 Days or more

• 

  Dial Caliper - Standard Model, Carbide-Tipped, DVC-W

  NIIGATASEIKI

  •Model: Standard Calipers
  •Display Method: Dial
  •Depth Bar W/WO: Included
  •Impermeability: Not Included
  •With / Without measurement data output terminal: Not Included

  • Volume Discount

  Days to Ship:	9 Days or more

• 

  Vernier Caliper - Standard Model, Stainless Steel

  SINWASOKUTEI

  Standard calipers.
  [Features]
  · Standard type and easy to use.
  [Applications]
  · Ideal for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Vernier Caliper - Standard, Flat Head, PITA

  NAKAMURASEISAKU

  [Features]
  · 21st century standard calipers, Pita calipers.
  · "Flat head" enables easy measurement from any corner.
  · PITA15: The main scale grooves on the top and bottom scales reduce diffuse reflection on the surface with the scale markings.
  · Because the green color is easy on the eyes, they don't get tired.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Dial Caliper - Shock Resistant, DMK-J

  NAKAMURASEISAKU

  [Features]
  · Rack and pinion type caliper.
  · The improved shock resistance allows use with no concerns.
  · Pointer needle 1 revolution 1 mm.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · Used for on-site measurements of precision machining.

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  [Kanon] Centerline Caliper E-RX

  NAKAMURASEISAKU

  [Features]
  · The pitch of circular holes can be measured by direct reading.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For measuring at various machining sites.

  • Volume Discount

  Days to Ship:	11 Days or more

• 

  Centerline Caliper - Vernier, Offset Type, RM-2

  NAKAMURASEISAKU

  [Features]
  · Ideal for pitch measurement of holes with different diameters.
  · Round hole pitch calipers of “offset type," with main scale probe moving vertically.
  · Since the measuring element of the main scale moves vertically, it possible to measure not only same-diameter holes but also the pitch between different diameter holes.

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Vernier Caliper - Long Jaw Type for Narrow Spaces, ROBA

  NAKAMURASEISAKU

  [Features]
  · The length of the inside and outside jaws is larger than that of the standard product.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For internal/external measurements in narrow/deep places.

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Vernier Caliper - Short Jaw Type, SBM

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring machining steps within holes.
  · "Short-leg jaw" is shaped to make measuring the stepped sections in holes easier.
  · Has a short jaw ideal for measurement for deep hole groove processing

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Digital Caliper - High-Speed, LCD Type, TDN

  Trusco Nakayama

  [Features]
  · Features a high-speed model LCD.
  · Digital display for clear viewing.
  · With hold function.
  · Comes with complete inspection tables.
  [Applications]
  · Exterior measurements, interior measurements, step measurements, depth measurements.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Vernier Caliper - Rapid Scale, GVC-KD

  NIIGATASEIKI

  •Model: Standard Calipers
  •Display Method: Vernier (Analog)
  •Depth Bar W/WO: Included
  •Minimum Read Value (mm): 0.05
  •Feature: · Main scale contains 1 mm increment graduations for easy visualization, as well as step graduations. · Values can be instantly obtained with cumulative number +2 mm point graduations. · By including decimal number graduations from the sub

  • Volume Discount

  Days to Ship:	11 Days or more

Loading...