(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
EWB Round Bit Boring Head (High-Speed Finishing / Manual Balance Adjustment Mechanism Built-In)
DAISHOWASEIKI
[Features]
· The internal weight can be adjusted manually by turning the balance ring.
· Manual balance adjustment mechanism. 5 μm/φ scale precision diameter adjustment mechanism (EWB2-50 only).
Days to Ship: | 13 Days or more |
---|
EWN Boring Head Set (for Finishing / Round Bit Type)
DAISHOWASEIKI
•Use: Minor Diameter
•Minimum Processing Diameter: 1
•Oil Hole Presence: Included
•Feature: Three types of heads suitable for machining can be selected.
•Specification: Ultra-precision head that can be adjusted in microns makes small-diameter boring possible. Extensive carbide cutting tool series that can be used for quick small-diameter deep drilling.
Days to Ship: | 10 Days or more |
---|
Insert Holder For EWN Boring Head Replacement
DAISHOWASEIKI
[Features]
Combining the head and insert holder makes it possible to secure a cutting chip pocket.
Designed for improved cutting chip discharge.
For EWN head
Days to Ship: | 12 Days or more |
---|
RW Cartridge (for Through Holes) Cartridge Body
DAISHOWASEIKI
•Use: Minor Diameter
•Compatible Tip Shape: S (Square)
•Type: Through Hole A Type
•Description: The cartridges is a set of two and comes with one tip clamp screw wrench.
•Specification: Square tip, 4 corners are usable
Days to Ship: | 10 Days or more |
---|
RW Cartridge (for Blind Holes) Cartridge Body
DAISHOWASEIKI
•Use: Minor Diameter
•Compatible Tip Shape: C (80° Diamond)
•Type: For Blind Hole E Type
•Specification: 80° Diamond-shaped tip; 2 corners can be used
Days to Ship: | 8 Days or more |
---|
SW Cartridge (A-Type for Through Holes)
DAISHOWASEIKI
[Features]
· 4 corners of the tip can be used
Days to Ship: | 10 Days or more |
---|
SW Cartridge (E-Type for Blind Holes)
DAISHOWASEIKI
[Features]
· Compatible with flat seating surface machining
Days to Ship: | 10 Days or more |
---|
SW Boring Head (Rough Highly Rigid Type)
DAISHOWASEIKI
[Features]
· High-rigidity type for roughing. Center through.
Days to Ship: | 10 Days or more |
---|
TW Cartridge (E-Type for Blind Holes)
DAISHOWASEIKI
[Features]
· 80° diamond-shaped tip; 2 corners can be used
Days to Ship: | 8 Days or more |
---|
EZB-HP (Internal Diameter Processing)
KYOCERA
•Preferred Hand: Right Handed
•Material: PR1225
Days to Ship: | 8 Days or more |
---|
EZB-ST (Internal Diameter Processing)
KYOCERA
•Preferred Hand: Right Handed
•Material: PR1225
Days to Ship: | 8 Days or more |
---|
EZB-NB (Internal Diameter Processing)
KYOCERA
•Preferred Hand: Right Handed
•rε (mm): 0.05 ±0.015
•Material: PR1225
Days to Ship: | 8 Days or more |
---|
KYOCERA
For complete product overview and details on EZH-ST Sleeve see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Use: Pull
•Preferred Hand: Right Handed
•Dimension H (mm): 3.9
Days to Ship: | 10 Days or more |
---|
SVNS-N Type (No Side Stopper/No Stop Screw Specifications)
KYOCERA
•Preferred Hand: Right Handed
•Set Screw: -
•Clamp Screw: SB-3080TR
•Dimension L2 (mm): 45
•Wrench: LTW-10S
Days to Ship: | 10 Days or more |
---|
S...SVN-SN Type (without Side Stopper, Same Diameter Type)
KYOCERA
•Preferred Hand: Right Handed
•Set Screw: SP3×4
•Clamp Screw: SB-3080TR
•Compatible Tip: VNBR.... - ..VNBTR....- ...VNGR.... - ..VNFGR....- ..VNTR.... - ..
•Dimension F1 (mm): 4
Days to Ship: | 10 Days or more |
---|
VNBX-S Type (Inner Diameter Machined) [Corner R (rε) Flathead Tolerance]
KYOCERA
•Use: Minor Diameter
•Preferred Hand: Right Handed
•Dimension H (mm): 3.9
•Material: PR930
Days to Ship: | 10 Days or more |
---|
S...SVN-XN Type (Round Shank, Standard Type)
KYOCERA
•Preferred Hand: Right Handed
•Set Screw: SP3×4
•Clamp Screw: SB-3080TR
•Compatible Tip: VNBXR...
•Wrench: FT-10
Days to Ship: | 12 Days or more |
---|
S...SVN-SXN Type (Round Shank, Same Diameter Type)
KYOCERA
•Preferred Hand: Right Handed
•Set Screw: SP3×4
•Clamp Screw: SB-3080TR
•Compatible Tip: VNBXR...
•Dimension L2 (mm): 23
Days to Ship: | 12 Days or more |
---|
Small Bore Boring Twin Bar, Model STW (Round Shank for Horizontal Mount)
KYOCERA
•Preferred Hand: Right Handed
•Clamp Screw: SB-3080TR
•Compatible Tip: TWBR ○○○○○ - ○○○
•Dimension F2 (mm): -
•Dimension L2 (mm): -
Days to Ship: | 12 Days or more |
---|
Small Bore Boring Twin Bar S..-STW Model (Round Shank for Horizontal Mount)
KYOCERA
•Preferred Hand: Right Handed
•Clamp Screw: SB-3080TR
•Compatible Tip: TWBR ○○○○○ - ○○○
•Dimension T (mm): 3
•Wrench: LTW-10S
Days to Ship: | 11 Days or more |
---|
PSB-S Type (Internal Diameter Machining)
KYOCERA
An insert bar for small inner diameter boring.
Machining applications: Inner diameter / through hole
Reference corner radius (nose radius): 0.05
Days to Ship: | 7 Days or more |
---|
C/E-SCLC-A Type Carbide Anti-Vibration Bar (Inner Diameter / Back End Surface Machining)
KYOCERA
•Use: Minor Diameter
•Compatible Tip Shape: C (80° Diamond)
•Clearance Angle: 7°
•Clamp Shape: Screw On
•Protrusion Length d: ~7
Days to Ship: | 9 Days or more |
---|
S-SCLP-A Type Steel Bar (Inner Diameter, Inner End Surface Machining)
KYOCERA
•Use: Minor Diameter
•Compatible Tip Shape: C (80° Diamond)
•Clearance Angle: 11°
•Clamp Shape: Screw On
•Protrusion Length d: Up to 4
Days to Ship: | 8 Days or more |
---|
E-SCLP-A Carbide Anti-Vibration Bar (Inner Diameter/Inner Face Machining)
KYOCERA
•Use: Minor Diameter
•Compatible Tip Shape: C (80° Diamond)
•Clearance Angle: 11°
•Clamp Shape: Screw On
•Protrusion Length d: ~7
Days to Ship: | 10 Days or more |
---|
A-SDUC-AE Type Excellent Bar (Profiling)
KYOCERA
•Use: Inner Diameter Profile
•Compatible Tip Shape: D (55° Diamond)
•Clearance Angle: 7°
•Clamp Shape: Screw On
•Protrusion Length d: ~5.5
Days to Ship: | 10 Days or more |
---|
S-SDUC-A Type Steel Bar (Profile Machining)
KYOCERA
•Use: Inner Diameter Profile
•Compatible Tip Shape: D (55° Diamond)
•Clearance Angle: 7°
•Clamp Shape: Screw On
•Protrusion Length d: Up to 4
Days to Ship: | 8 Days or more |
---|
E-SDUC-A Carbide Anti-Vibration Bar (Profiling)
KYOCERA
•Use: Inner Diameter Profile
•Compatible Tip Shape: D (55° Diamond)
•Clearance Angle: 7°
•Clamp Shape: Screw On
•Protrusion Length d: ~7
Days to Ship: | 8 Days or more |
---|
A-SDZC-AE Excellent Bar (Boring)
KYOCERA
•Use: Pull
•Compatible Tip Shape: D (55° Diamond)
•Clearance Angle: 7°
•Clamp Shape: Screw On
•Protrusion Length d: ~5.5
Days to Ship: | 10 Days or more |
---|
S-SDZC-A Type Steel Bar (Draw Machining)
KYOCERA
•Use: Pull
•Compatible Tip Shape: D (55° Diamond)
•Clearance Angle: 7°
•Clamp Shape: Screw On
•Protrusion Length d: Up to 4
Days to Ship: | 12 Days or more |
---|
C...SJLC Type Carbide Anti-Vibration Bar (Inner Diameter / Back End Surface Machining)
KYOCERA
•Use: Minor Diameter
•Overall Length L1: 91
•Minimum Processing Diameter: 5.5
•Compatible Tip Shape: Others
•Clamp Shape: Screw On
Days to Ship: | 11 Days or more |
---|
A-STLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)
KYOCERA
•Use: Minor Diameter
•Compatible Tip Shape: T (Triangular)
•Clamp Shape: Screw On
•Protrusion Length d: ~5.5
•Oil Hole Presence: Included
Days to Ship: | 9 Days or more |
---|
KYOCERA
•Use: Minor Diameter
•Compatible Tip Shape: T (Triangular)
•Clearance Angle: 11°
•Clamp Shape: Screw On
•Protrusion Length d: Up to 4
Days to Ship: | 8 Days or more |
---|
S...STWP-E Type Excellent Bar (Profiling)
KYOCERA
•Use: Inner Diameter Profile
•Compatible Tip Shape: T (Triangular)
•Clamp Shape: Screw On
•Protrusion Length d: Up to 3
•θ: 0°
Days to Ship: | 10 Days or more |
---|
C...STZB Type Carbide Anti-Vibration Bar (Boring)
KYOCERA
•Use: Inner Diameter Profile
•Overall Length L1: 110
•Minimum Processing Diameter: 8.5
•Compatible Tip Shape: T (Triangular)
•Clamp Shape: Screw On
Days to Ship: | 11 Days or more |
---|
S-SVPC (B)-A Type Steel Bar (Undercutting and Profiling)
KYOCERA
•Use: Inner Diameter Profile
•Compatible Tip Shape: V (35° Diamond)
•Clearance Angle: 5°
•Clamp Shape: Screw On
•Protrusion Length d: Up to 4
Days to Ship: | 10 Days or more |
---|
E-SVPC (B)-A Type Carbide Vibration-Free Bar (Undercutting and Profiling)
KYOCERA
•Use: Inner Diameter Profile
•Compatible Tip Shape: V (35° Diamond)
•Clearance Angle: 5°
•Clamp Shape: Screw On
•Preferred Hand: Right Handed
Days to Ship: | 12 Days or more |
---|
A-SVZC (B)-AE Type Excellent Bar (Drawing)
KYOCERA
•Use: Pull
•Compatible Tip Shape: V (35° Diamond)
•Clamp Shape: Screw On
•Protrusion Length d: ~5.5
•Oil Hole Presence: Included
Days to Ship: | 10 Days or more |
---|
S-SVZC (B)-A Type Steel Bar (Drawing)
KYOCERA
•Use: Pull
•Compatible Tip Shape: V (35° Diamond)
•Clamp Shape: Screw On
•Protrusion Length d: Up to 4
•Standard corner Dimension R (rε): 0.4
Days to Ship: | 11 Days or more |
---|
S/A-SWUB (P)-AE Type Excellent Bar (Inner Diameter Machining)
KYOCERA
•Use: Minor Diameter
•Compatible Tip Shape: W (Hexagonal)
•Clamp Shape: Screw On
•Protrusion Length d: ~5.5
•Dimension S (mm): -
Days to Ship: | 8 Days or more |
---|
S-SWUB (P)-A Type Steel Bar (Inner Diameter Machining)
KYOCERA
•Use: Minor Diameter
•Compatible Tip Shape: W (Hexagonal)
•Clamp Shape: Screw On
•Protrusion Length d: Up to 4
•Dimension S (mm): -
Days to Ship: | 8 Days or more |
---|
S...SSKP Type (Inner Diameter Machining)
KYOCERA
•Use: Minor Diameter
•Overall Length L1: 180
•Minimum Processing Diameter: 20
•Compatible Tip Shape: S (Square)
•Clamp Shape: Screw On
Days to Ship: | 12 Days or more |
---|
S...CSKP Type (Inner Diameter Machining)
KYOCERA
•Use: Minor Diameter
•Compatible Tip Shape: S (Square)
•Clamp Shape: Clamp On
•Preferred Hand: Right Handed
•Protrusion Length d: Up to 3
Days to Ship: | 12 Days or more |
---|
S...CTUP Type (Inner Diameter Machining)
KYOCERA
•Use: Minor Diameter
•Compatible Tip Shape: T (Triangular)
•Clamp Shape: Clamp On
•Protrusion Length d: Up to 3
•θ: 0°
Days to Ship: | 10 Days or more |
---|
SRCP-B Type (Inner Diameter Machined)
KYOCERA
•Use: Minor Diameter
•Compatible Tip Shape: R (Round)
•Clamp Shape: Screw On
Days to Ship: | 12 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Applicable Tip Shape |
Minimum Processing Diameter |
Use |
Preferred Hand |
Clamp Shape |
Overall Length L1 |
Clearance Angle |
Link Diameter |
Protrusion Length (L/D) |
Oil Hole Presence |
Brand | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | EWB Round Bit Boring Head (High-Speed Finishing / Manual Balance Adjustment Mechanism Built-In) | VNBX-S Type (Inner Diameter Machined) [Corner R (rε) Flathead Tolerance] | Small Bore Boring Twin Bar, Model STW (Round Shank for Horizontal Mount) | Small Bore Boring Twin Bar S..-STW Model (Round Shank for Horizontal Mount) | C/E-SCLC-A Type Carbide Anti-Vibration Bar (Inner Diameter / Back End Surface Machining) | S-SCLP-A Type Steel Bar (Inner Diameter, Inner End Surface Machining) | E-SCLP-A Carbide Anti-Vibration Bar (Inner Diameter/Inner Face Machining) | C...SJLC Type Carbide Anti-Vibration Bar (Inner Diameter / Back End Surface Machining) | A-STLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining) | E-SVPC (B)-A Type Carbide Vibration-Free Bar (Undercutting and Profiling) | S/A-SWUB (P)-AE Type Excellent Bar (Inner Diameter Machining) | ||||||||||||||||||||||||||||||||||
Days to Ship | 13 Days or more | 10 Days or more | 12 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 11 Days or more | 7 Days or more | 9 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 12 Days or more | 11 Days or more | 9 Days or more | 8 Days or more | 10 Days or more | 11 Days or more | 10 Days or more | 12 Days or more | 10 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 12 Days or more | 10 Days or more | 12 Days or more |
Applicable Tip Shape | T (Triangular) | - | T (Triangular) | S (Square) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) / D (55° Diamond) | - | C (80° Diamond) | - | - | - | - | - | - | - | - | - | - | - | - | - | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | D (55° Diamond) | D (55° Diamond) | D (55° Diamond) | D (55° Diamond) | D (55° Diamond) | Others | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | V (35° Diamond) | V (35° Diamond) | V (35° Diamond) | V (35° Diamond) | W (Hexagonal) | W (Hexagonal) | S (Square) | S (Square) | T (Triangular) | R (Round) |
Minimum Processing Diameter | 1 | 1 | - | 25 ~ 125 | 25 ~ 125 | 20 ~ 175 | 20 ~ 175 | 20 ~ 148 | 25 | 2 ~ 6 | 2 ~ 7.5 | 2.5 ~ 7.5 | - | 4 ~ 5 | - | - | 1 ~ 4 | - | - | - | - | 4 | 14 ~ 27 | 12 ~ 27 | 14 ~ 27 | 14 ~ 23 | 14 ~ 32 | 14 ~ 32 | 14 ~ 32 | 14 ~ 32 | 5.5 | 10 ~ 22 | 8 ~ 27 | 20 ~ 25 | 8.5 | 14 ~ 40 | 14 ~ 31 | 16 ~ 40 | 16 ~ 40 | 6 ~ 22 | 6 ~ 22 | 20 | 20 ~ 27 | 27 ~ 50 | 20 ~ 32 |
Use | Minor Diameter | Minor Diameter | Minor Diameter | Minor Diameter | Minor Diameter | Minor Diameter | Minor Diameter | Minor Diameter | Minor Diameter | - | - | - | - | Pull | - | - | Minor Diameter | - | - | - | - | Minor Diameter | Minor Diameter | Minor Diameter | Minor Diameter | Inner Diameter Profile | Inner Diameter Profile | Inner Diameter Profile | Pull | Pull | Minor Diameter | Minor Diameter | Minor Diameter | Inner Diameter Profile | Inner Diameter Profile | Inner Diameter Profile | Inner Diameter Profile | Pull | Pull | Minor Diameter | Minor Diameter | Minor Diameter | Minor Diameter | Minor Diameter | Minor Diameter |
Preferred Hand | - | - | - | - | - | - | - | - | - | Right Handed | Right Handed | Right Handed | - | Right Handed | Right Handed | Right Handed | Right Handed | Right Handed | Right Handed | Right Handed | Right Handed | Left Handed | Right Handed / Left Handed | Right Handed / Left Handed | Right Handed / Left Handed | Right Handed / Left Handed | Right Handed / Left Handed | Right Handed / Left Handed | Right Handed / Left Handed | Right Handed / Left Handed | Right Handed / Left Handed | Right Handed / Left Handed | Right Handed / Left Handed | Left Handed | Right Handed / Left Handed | Right Handed / Left Handed | Right Handed | Right Handed / Left Handed | Right Handed / Left Handed | Right Handed / Left Handed | Right Handed / Left Handed | Right Handed | Right Handed | Right Handed / Left Handed | Right Handed / Left Handed |
Clamp Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Screw On | Screw On | Screw On | Screw On | Screw On | Screw On | Screw On | Screw On | Screw On | Screw On | Screw On | Screw On | Screw On | Screw On | Screw On | Screw On | Screw On | Screw On | Screw On | Screw On | Clamp On | Clamp On | Screw On |
Overall Length L1 | - | - | - | - | - | - | - | - | - | 32 ~ 66.1 | 27.3 ~ 74.2 | 32 ~ 74.2 | 80 ~ 135 | 30.8 ~ 39.8 | 125 ~ 150 | 90 ~ 100 | 26.5 ~ 39.8 | 80 ~ 180 | 90 ~ 125 | 85 ~ 150 | 80 ~ 125 | 60 | 120 ~ 300 | 140 ~ 250 | 90 ~ 300 | 140 ~ 200 | 140 ~ 250 | 105 ~ 300 | 140 ~ 250 | 140 ~ 250 | 91 | 120 ~ 200 | 100 ~ 250 | 200 ~ 220 | 110 | 140 ~ 250 | 160 ~ 300 | 150 ~ 250 | 150 ~ 250 | 100 ~ 200 | 100 ~ 200 | 180 | 160 ~ 180 | 180 ~ 315 | 125 ~ 150 |
Clearance Angle | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 7° | 11° | 11° | 7° | 7° | 7° | 7° | 7° | - | - | 11° | - | - | 5° | 5° | 5° / 7° | 5° / 7° | 5° / 11° | 5° / 11° | - | - | - | - |
Link Diameter | 50 ~ 63.5 | - | - | - | - | - | - | - | - | 2 ~ 6 | 1.7 ~ 7 | 2 ~ 7 | - | - | - | - | - | - | - | - | - | 3.8 | 12 ~ 25 | 10 ~ 25 | 12 ~ 25 | 10 ~ 20 | 10 ~ 25 | 10 ~ 25 | 10 ~ 25 | 10 ~ 25 | 4 | 8 ~ 20 | 6 ~ 25 | 16 ~ 20 | 6 | 10 ~ 32 | 10 ~ 25 | 12 ~ 32 | 12 ~ 32 | 8 ~ 20 | 8 ~ 20 | 16 | 16 ~ 20 | 20 ~ 40 | - |
Protrusion Length (L/D) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ~7 | Up to 4 | ~7 | ~5.5 | Up to 4 | ~7 | ~5.5 | Up to 4 | ~7 | ~5.5 | Up to 4 | Up to 3 | ~7 | Up to 4 | ~7 | ~5.5 | Up to 4 | ~5.5 | Up to 4 | Up to 3 | Up to 3 | Up to 3 | - |
Oil Hole Presence | Included | Included | - | None | None | None | None | Included | None | - | - | - | - | - | - | - | - | - | - | - | - | - | Included | None | Included | Included | None | Included | Included | None | None | Included | None | None | None | None | Included | Included | None | Included / None | None | None | None | None | None |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy