(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Cermet End Mill (for Bottom Finishing) FX-MCF
OSG
Cermet base material + FX coating end mill for bottom finish. Provides a mirror finish at astoundingly high speeds.
Days to Ship: | 8 Days or more |
---|
6-Flute, Unequal Lead, Corner R, Short NEO-CR-EMS
OSG
Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.
Days to Ship: | 8 Days or more |
---|
MHR430R MUGEN-COATING 4-Flute Long Neck Radius End Mill
NS TOOL
•Model: Long Neck Radius
•Number Of Flutes (sheet): 4
•Helix Angle (Θ): Standard Helix (30 to 40°)
•Coating: TiAlN
•(γ) Neck Angle (°): 12°
Days to Ship: | 8 Days or more |
---|
GS MILL Roughing Radius GSRE-R
Nachi-Fujikoshi
Ideal for high-efficiency roughing during contour machining and corner rounding of materials from steel to stainless steel.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
Excellent in fracture resistance and is ideal for corner radius and contour machining of high hardness material.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
Ideal for deep corner rounding of molds and machine parts. High precision machining is possible even for deep engraving.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
Ideal for corner rounding and high-speed contour machining of molds and machine parts.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
Ideal for corner rounding and contour machining of molds and machine parts.
Days to Ship: | 8 Days or more |
---|
2-Flute, Corner R Short Type FX-CR-EDS-6
OSG
End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.
Days to Ship: | 8 Days or more |
---|
2-Flute, Corner R Short Type FX-CR-MG-EDS
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
Days to Ship: | 8 Days or more |
---|
2-Flute, Corner R Long Type FX-CR-MG-EDL
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
Days to Ship: | 8 Days or more |
---|
Carbide End Mill, Phoenix (High Feed Bull Nose) PHX-CRT
OSG
Corner radius type with a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.
Days to Ship: | 8 Days or more |
---|
Carbide Ultra FX End Mill (Positive Corner Radius Type Multifunction) FX-CR-MG-EHS
OSG
The highly sharp, positive cutting blade prevents the occurrence of work-hardening. Supports various cutter paths due to the rounded corners.
Days to Ship: | 8 Days or more |
---|
4-Flute, Corner R, Long Type FX-CR-MG-EML
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
Days to Ship: | 8 Days or more |
---|
4-Flute, Unequal Lead, Corner R, Short, Strong Heavy-Cutting Model NEO-CR-PHS
OSG
Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.
Days to Ship: | 8 Days or more |
---|
WX21 Carbide End Mill (Super Radius) WX-CRE
OSG
A new type of radius end mill that achieves high-efficiency rough machining of molds. Capable of direct high-performance engraving of hardened steel.
Days to Ship: | 8 Days or more |
---|
Heavy Duty Multi-Function FXS-PKE
OSG
In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.
Days to Ship: | 8 Days or more |
---|
Carbide Ultra FX Super End Mill (Strong Type Multifunction HS Shank) FXS-HS-PKE
OSG
Ideal for high-efficiency machining of pocket engraving with the minimum required blade length and strong torsion. Overall tool length which fits shrink-fit and HSK types perfectly.
Days to Ship: | 8 Days or more |
---|
WX21 Carbide End Mill, 4-Blade Short Rounded Corner High-Strength Heavy Cutting Type WX-CR-PHS
OSG
Next generation high torsion radius end mill with great chip discharge performance and high blade rigidity. Supports a wide range of cutter passes including ramping and profile processing in addition to normal 2D machining.
Days to Ship: | 8 Days or more |
---|
Carbide Ultra FX Super End Mill (Corner Radius Short Type) FXS-CR-EMS
OSG
Radius end mill for high-speed processing with high rigidity. High speed machining of hardened steel is also possible.
Days to Ship: | 8 Days or more |
---|
For Use with Vertical Walls, Multifunctional FXS-MFE
OSG
Capable of high-efficiency, high-precision machining of wide standing walls using step cutting
Days to Ship: | 8 Days or more |
---|
MSRS230 MUGEN-COATING 2-Flute Radius End Mill
NS TOOL
•Model: Regular Type
•Number Of Flutes (sheet): 2
•Helix Angle (Θ): Standard Helix (30 to 40°)
•Coating: TiAlN
•(γ) Neck Angle (°): 9°
Days to Ship: | 8 Days or more |
---|
MSTNR230 MUGEN-COATING Long Tapered Neck Radius End Mill
NS TOOL
•Model: Tapered Neck Radius
•Number Of Flutes (sheet): 2
•Helix Angle (Θ): Standard Helix (30 to 40°)
•Coating: TiAlN
•R Precision (µm): 0.005~-0.005
Days to Ship: | 8 Days or more |
---|
MHR230R MUGEN-COATING 2-Flute Long Neck Radius End Mill
NS TOOL
•Model: Long Neck Radius
•Number Of Flutes (sheet): 2
•Helix Angle (Θ): Standard Helix (30 to 40°)
•Coating: TiAlN
•(γ) Neck Angle (°): 12°
Days to Ship: | 8 Days or more |
---|
MSRS430 MUGEN-COATING 4-Flute Radius End Mill
NS TOOL
•Model: Regular Type
•Number Of Flutes (sheet): 4
•Helix Angle (Θ): Standard Helix (30 to 40°)
•Coating: TiAlN
•R Precision (µm): 0.01~-0.01
Days to Ship: | 8 Days or more |
---|
SAGVR2T SA Coated Carbide Radius 2-Flute
S&K
[Features]
· Ideal for corner rounding or cutting curved surfaces.
· Can also be used to prevent chipped corners.
Days to Ship: | 10 Days or more |
---|
SAGVR2LS SA Coated Carbide Radius 4-Flute Long Shank
S&K
[Features]
· Suitable for corner rounding or cutting curved surfaces.
· A long shank type which allows for machining in deep sections.
· Finished surfaces can be improved and high-efficiency machining is possible.
Days to Ship: | 10 Days or more |
---|
SAGVR2LS SA Coated Carbide Radius 2-Flute Long Shank
S&K
Suitable for corner rounding or cutting curved surfaces. The long shank allows for machining in deep sections.
[Features]
· A long shank type which allows for machining in deep sections.
Days to Ship: | 10 Days or more |
---|
SCD2A End Mill with Corner R, 2-Flute, OK Coated
OKAZAKI
The adoption of a long shank allows for corner rounding in deep sections.
Days to Ship: | 12 Days or more |
---|
SCE4A Ultra-Strong Radius, 4-Flute, OK Coated
OKAZAKI
A multi-function type end mill that is capable of groove milling and side milling as well as profiling.
Days to Ship: | 12 Days or more |
---|
Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length) (with Rounded Corners)
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Days to Ship: | 10 Days or more |
---|
Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (with Rounded Corners)
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Days to Ship: | 8 Days or more |
---|
End Mill with 2 Carbide Flutes and Corner Radius KSRA-2
KYOWASEIKO
Small diameter size with TiAlN coating. φ3 shank.
Days to Ship: | 10 Days or more |
---|
End Mill with 4 Carbide Flutes and Corner Radius KSRA-4
KYOWASEIKO
Small diameter size with 4-flute blade and TiAlN coating. φ3 shank.
Days to Ship: | 10 Days or more |
---|
TiAlN Coat, Carbide Long Neck Radius End Mill, 2 Flutes
VAN HOORN
•Model: Long Neck Radius
•Number Of Flutes (sheet): 2
•Coating: TiAlN
•Overall Length (L) (mm): 64
•Cutting Edge Accuracy: g7
Days to Ship: | 8 Days or more |
---|
TiAlN Coat, Carbide Long Neck Radius End Mill, 4 Flutes
VAN HOORN
•Model: Long Neck Radius
•Number Of Flutes (sheet): 4
•Coating: TiAlN
•Overall Length (L) (mm): 64
•Link Diameter (d) (mm): 6
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Flute Diameter (D)(φ) |
R Size(mm) |
Work Material |
Flute Length (ℓ)(mm) |
Number of Flutes(sheet) |
Model |
Overall Length (L)(mm) |
Link Diameter (d)(mm) |
Length Under Neck (ℓ1)(mm) |
Processing Applications |
Coating |
Helix Angle (Θ) |
R Precision(µm) |
Brand | OSG | OSG | NS TOOL | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | NS TOOL | NS TOOL | NS TOOL | NS TOOL | S&K | S&K | S&K | OKAZAKI | OKAZAKI | DIJET | DIJET | KYOWASEIKO | KYOWASEIKO | VAN HOORN | VAN HOORN |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Carbide Ultra FX End Mill (Positive Corner Radius Type Multifunction) FX-CR-MG-EHS | 4-Flute, Unequal Lead, Corner R, Short, Strong Heavy-Cutting Model NEO-CR-PHS | Carbide Ultra FX Super End Mill (Strong Type Multifunction HS Shank) FXS-HS-PKE | WX21 Carbide End Mill, 4-Blade Short Rounded Corner High-Strength Heavy Cutting Type WX-CR-PHS | Carbide Ultra FX Super End Mill (Corner Radius Short Type) FXS-CR-EMS | Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length) (with Rounded Corners) | Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (with Rounded Corners) | |||||||||||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 12 Days or more | 12 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more |
Flute Diameter (D)(φ) | 6 ~ 20 | 6 ~ 25 | 1 ~ 6 | 6 ~ 20 | 6 ~ 20 | 3 ~ 20 | 3 ~ 12 | 3 ~ 20 | 0.5 ~ 2.5 | 1 ~ 12 | 6 ~ 12 | 1 ~ 5 | 6 ~ 12 | 16 ~ 20 | 3 ~ 25 | 2 ~ 13 | 3 ~ 20 | 6 ~ 12 | 6 | 6 ~ 25 | 10 | 1 ~ 5 | 0.2 ~ 3 | 0.2 ~ 6 | 6 ~ 12 | 3 ~ 20 | 6 ~ 25 | 6 ~ 25 | 4 ~ 12 | 4 ~ 12 | 6 ~ 10 | 3 ~ 20 | 0.5 ~ 3 | 1 ~ 3 | 0.1 ~ 2.5 | 0.4 ~ 2 |
R Size(mm) | 0.1 ~ 0.4 | 0.3 ~ 5 | 0.05 ~ 1 | 0.5 ~ 4 | 0.2 ~ 2 | 0.2 ~ 2 | 0.2 ~ 2 | 0.2 ~ 3 | 0.1 | 0.1 ~ 3 | 0.5 ~ 3 | 0.3 ~ 1 | 0.2 | 0.5 ~ 3 | 0.2 ~ 5 | 0.5 ~ 3 | 0.2 ~ 3 | 0.5 ~ 1 | 0.3 | 0.2 ~ 3 | 0.5 | 0.1 ~ 1.5 | 0.05 ~ 0.5 | 0.05 ~ 1 | 0.1 ~ 3 | 0.5 ~ 5 | 0.3 ~ 8 | 0.3 ~ 8 | 0.2 ~ 2 | 0.5 ~ 2 | 0.5 | 0.2 ~ 1 | - | - | 0.03 ~ 0.2 | 0.05 ~ 0.2 |
Work Material | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Cast Iron[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[◎] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Titanium[○] |
Flute Length (ℓ)(mm) | 0.9 ~ 3.2 | 12 ~ 50 | 0.8 ~ 5 | 13 ~ 38 | 13 ~ 38 | 4.5 ~ 30 | 7.5 ~ 26 | 8 ~ 38 | 0.7 ~ 3.7 | 2.5 ~ 26 | 20 ~ 40 | 2 ~ 10 | 13 ~ 26 | 48 ~ 56 | 6 ~ 50 | 0.8 ~ 5.5 | 5 ~ 30 | 9 ~ 18 | 13 | 15 ~ 50 | 15 | 2 ~ 10 | 0.15 ~ 2.5 | 0.15 ~ 9 | 12 ~ 24 | 10 ~ 45 | 20 ~ 75 | 20 ~ 75 | 12 ~ 36 | 8 ~ 24 | 21 ~ 34 | 8 ~ 38 | 1.5 ~ 10 | 3 ~ 10 | 0.2 ~ 3 | 0.6 ~ 3 |
Number of Flutes(sheet) | 4 | 6 | 4 | 4 | 6 ~ 8 | 4 | 4 | 4 | 2 | 2 | 2 | 3 | 4 | 4 | 4 | 3 ~ 4 | 4 | 4 | 4 | 6 ~ 8 | 4 | 2 | 2 | 2 | 4 | 2 | 4 | 2 | 2 | 4 | 4 | 4 | 2 | 4 | 2 | 4 |
Model | Regular Type | Regular Type | Long Neck Radius | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Tapered Neck Radius | Long Neck Radius | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Long Neck Radius | Long Neck Radius |
Overall Length (L)(mm) | 90 ~ 160 | 50 ~ 120 | 50 ~ 110 | 50 ~ 100 | 50 ~ 100 | 60 ~ 200 | 45 ~ 75 | 50 ~ 125 | 50 | 40 ~ 110 | 90 ~ 110 | 60 ~ 70 | 90 ~ 110 | 140 ~ 160 | 50 ~ 120 | 60 ~ 110 | 60 ~ 160 | 50 ~ 80 | 60 | 90 ~ 180 | 130 | 60 ~ 70 | 50 ~ 110 | 45 ~ 110 | 80 ~ 110 | 50 ~ 115 | 120 ~ 230 | 120 ~ 230 | 70 ~ 110 | 70 ~ 110 | 60 ~ 90 | 60 ~ 125 | 60 | 60 | 64 | 64 |
Link Diameter (d)(mm) | 6 ~ 20 | 6 ~ 25 | 4 ~ 6 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 6 ~ 12 | 6 ~ 20 | 6 | 4 ~ 12 | 6 ~ 12 | 6 | 6 ~ 12 | 16 ~ 20 | 6 ~ 25 | 6 ~ 12 | 6 ~ 20 | 6 ~ 12 | 6 | 6 ~ 25 | 8 | 4 ~ 6 | 4 ~ 6 | 4 ~ 6 | 6 ~ 12 | 6 ~ 20 | 6 ~ 25 | 6 ~ 25 | 6 ~ 12 | 6 ~ 12 | 6 ~ 10 | 6 ~ 20 | 3 | 3 | 4 ~ 6 | 6 |
Length Under Neck (ℓ1)(mm) | 9 ~ 30 | - | 3 ~ 48 | - | - | 12 ~ - | - | - | 1.5 ~ 5 | - | - | 4 ~ 15 | - | - | - | 5 ~ 24 | 9 ~ 60 | - | - | - | - | - | 1 ~ 60 | 0.5 ~ 48 | - | - | - | - | - | 15 ~ 42 | - | - | - | - | 0.2 ~ 25 | 2 ~ 8 |
Processing Applications | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Groove | Flat Surface / Side Surface / Groove | Side Surface | Side Surface / Groove | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | - | - |
Coating | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
Helix Angle (Θ) | No Helix/ None | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | No Helix/ None | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | - | - |
R Precision(µm) | - | - | 0.005~-0.005 ~ 0.01~-0.01 | - | - | -0.032~-0.059 ~ -0.014~-0.028 | 0~-0.030 ~ 0~-0.015 | -0.032~-0.059 ~ -0.014~-0.028 | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.005~-0.005 ~ 0.01~-0.01 | 0.005~-0.005 | 0.005~-0.005 ~ 0.01~-0.01 | 0.01~-0.01 | 0~+0.04 | 0~+0.04 | 0~+0.04 | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy