(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
UNION TOOL
•Model: Long Neck Radius
•Number Of Flutes (sheet): 4
•Helix Angle (Θ): Standard Helix (30 to 40°)
•Coating: For High Hardness (Silicone-Based)
•Maximum: Carbide End Mill Unimax Series, Vo.12, 2010 –
Days to Ship: | 8 Days or more |
---|
HLRS2000 HM Coated 2 Flute Long-Neck Radius
UNION TOOL
•Model: Long Neck Radius
•Number Of Flutes (sheet): 2
•Helix Angle (Θ): Standard Helix (30 to 40°)
•Coating: For High Hardness (Silicone-Based)
•Blade Diameter Tolerance (mm): 0~-0.015
Days to Ship: | 8 Days or more |
---|
Carbide End Mill, Phoenix, Long Neck, Tough Radius PHX-LN-CRE
OSG
Adopts an ultra-heat-resistant and ultra-hard WXS coating
Days to Ship: | 8 Days or more |
---|
Diamond Coated End Mill, 4-Flute Corner Radius, Type-N 6723
GUHRING
[Features]
· Diamond coated endmill suitable for graphite or plastic.
Days to Ship: | 10 Days or more |
---|
TSC Series Carbide Radius End Mill, 2-Flute/1.5D Flute Length (Stub) Model
MISUMI
Stub blade length with excellent edge rigidity
Days to Ship: | 8 Days or more |
---|
Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute/Long Model
MISUMI
The diamond coated radius shape that's ideal for shaping graphite [C-Value]
Days to Ship: | 8 Days or more |
---|
6-Flute, Unequal Lead, Corner R, Short NEO-CR-EMS
OSG
Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.
Days to Ship: | 8 Days or more |
---|
Power Radius End Mill MSXH440R
NS TOOL
•Model: Regular Type
•Number Of Flutes (sheet): 4
•Helix Angle (Θ): Standard Helix (30 to 40°)
•Coating: For High Hardness (Silicone-Based)
Days to Ship: | 8 Days or more |
---|
MHR430R MUGEN-COATING 4-Flute Long Neck Radius End Mill
NS TOOL
•Model: Long Neck Radius
•Number Of Flutes (sheet): 4
•Helix Angle (Θ): Standard Helix (30 to 40°)
•Coating: TiAlN
•(γ) Neck Angle (°): 12°
Days to Ship: | 8 Days or more |
---|
CBN End Mill (Small Diam., 2-Flute, Long-Neck Radius Type) CBN-LN-SXR
OSG
Blade uses a sintered CBN material.
Days to Ship: | 8 Days or more |
---|
CBN 2-Flute Corner Radius End Mill SBREF-2
KYOWASEIKO
Direct engraving of high-hardness materials and hardened steel. The cutting depth can be increased.
Days to Ship: | 10 Days or more |
---|
CBN 3-Flute Corner Radius End Mill SBREF-3
KYOWASEIKO
Direct engraving of high-hardness materials and hardened steel. Capable of high-efficiency machining at a high feed rate.
Days to Ship: | 10 Days or more |
---|
TSC Series Carbide Radius End Mill, 4-Flute/Stub Model, ±0.005 Radius Precision
MISUMI
A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Radius End Mill, 2-Flute/Short Model
MISUMI
Radius end mills are available at low prices [C-Value]
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Radius End Mill, 4-Flute/Short Model
MISUMI
The 4-blade type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes [C-Value]
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Radius End Mill, 2-Flute Stub Model
MISUMI
2-Blade Radius for Shrink-Fit Holder
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Radius End Mill, 2-Flute/Short Model
MISUMI
Rich variations that can be selected from the stock and manufactured products
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Radius End Mill, 2-Flute/Regular Model
MISUMI
Classic radius with regular blade length
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Radius End Mill, 4-Flute/Stub Model, ±0.02 Radius Precision
MISUMI
4-blade radius for shrink-fit that's capable of high feed
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Radius End Mill, 4-Flute/Stub Model, Regrinding
MISUMI
Stub blade length that's ideal for high-speed machining
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Radius End Mill, 4-Flute/Short Model
MISUMI
4-blade design that enables efficient machining
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Radius End Mill, 4-Flute/Regular Model
MISUMI
Classic radius with regular blade length
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Long Neck Radius End Mill, 2-Flute, Long Neck Model
MISUMI
Long neck radius that can be used as a ball and allows a large pick feed
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Long Neck Radius End Mill, 4-Flute/Long Neck Model
MISUMI
4-blade long neck radius that's capable of high feed
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Tapered Neck Radius End Mill, 2-Flute/Tapered Neck Model
MISUMI
High-Precision Tapered Neck Radius
Days to Ship: | 8 Days or more |
---|
Carbide Radius End Mill for Resin Machining, 2-Flute/Regular Model
MISUMI
Small radius type that prevents cutter marks on resin
Days to Ship: | 8 Days or more |
---|
Non-Coated TS Coated Carbide 0.1mm Unit Radius Designated End Mill
MISUMI
3 day delivery of add-on machining radius in 0.1 mm increments
Days to Ship: | 10 Days or more |
---|
Nachi-Fujikoshi
End mill for aluminum and copper alloys. Capable of rounding corners of grooves.
Days to Ship: | 8 Days or more |
---|
GS MILL Roughing Radius GSRE-R
Nachi-Fujikoshi
Ideal for high-efficiency roughing during contour machining and corner rounding of materials from steel to stainless steel.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
Ideal for deep corner rounding of molds and machine parts. High precision machining is possible even for deep engraving.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
Ideal for corner rounding and high-speed contour machining of molds and machine parts.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
Ideal for corner rounding and contour machining of molds and machine parts.
Days to Ship: | 8 Days or more |
---|
2-Flute, Corner R Short Type FX-CR-EDS-6
OSG
End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.
Days to Ship: | 8 Days or more |
---|
2-Flute, Corner R Short Type FX-CR-MG-EDS
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
Days to Ship: | 8 Days or more |
---|
2-Flute, Corner R Long Type FX-CR-MG-EDL
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
Days to Ship: | 8 Days or more |
---|
3-Flute, Short, Corner R Type for Copper / Aluminum Alloy CA-CR-ETS
OSG
Even with aluminum part machining requiring large volumes of cutting, the unique groove form simultaneously achieves superior chip discharge performance, large cutting depth and a high feed rate.
Days to Ship: | 8 Days or more |
---|
3-Flute, Multifunctional, Strong Model for Aluminum Alloy CA-PKE
OSG
High-rigidity recessed short blade that can be used for everything from roughing to finishing using various cutter paths.
Days to Ship: | 8 Days or more |
---|
4-Flute, Corner R, Long Type FX-CR-MG-EML
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
Days to Ship: | 8 Days or more |
---|
4-Flute, Unequal Lead, Corner R, Short, Strong Heavy-Cutting Model NEO-CR-PHS
OSG
Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.
Days to Ship: | 8 Days or more |
---|
2-Flute, Corner Radius, Long Shank, Short Type for Graphite DIA-LS-CRED
OSG
Thin vertical wall milling tool for graphite electrode. The step processing prevents chattering and chipping. A rounded blade is used for the shank side as well.
Days to Ship: | 8 Days or more |
---|
Heavy Duty Multi-Function DLC-PKE
OSG
Ultra-smooth DLC coating enables semi-dry processing as well as high speed processing of aluminum.
Days to Ship: | 8 Days or more |
---|
2-Flute/4-Flute Pencil-Neck / Long Neck Corner Radius Type DG-CPR
OSG
A dedicated graphite coating with excellent abrasion resistance.
Days to Ship: | 8 Days or more |
---|
Carbide End Mill WX Super Coat (High Precision Bull Nose) WXS-CPR
OSG
High-precision bull nose (radius) end mill for shape processing of molds. High-speed cutting of hardened steel is also possible thanks to the WXS coating with excellent heat resistance.
Days to Ship: | 8 Days or more |
---|
HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius
UNION TOOL
•Model: Long Neck Radius
•Number Of Flutes (sheet): 2
•Helix Angle (Θ): Standard Helix (30 to 40°)
•Coating: For High Hardness (Silicone-Based)
•Blade Diameter Tolerance (mm): 0~-0.01
Days to Ship: | 8 Days or more |
---|
NS TOOL
•Model: Regular Type
•Number Of Flutes (sheet): 2
•Helix Angle (Θ): Standard Helix (30 to 40°)
•Coating: Non-Coated
•R Precision (µm): 0.02~-0.02
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Specifications |
Flute Diameter (D)(φ) |
R Size(mm) |
Work Material |
Flute Length (ℓ)(mm) |
Number of Flutes(sheet) |
Model |
Overall Length (L)(mm) |
Link Diameter (d)(mm) |
Length Under Neck (ℓ1)(mm) |
Processing Applications |
Coating |
Helix Angle (Θ) |
R Precision(µm) |
Brand | UNION TOOL | UNION TOOL | OSG | GUHRING | MISUMI | MISUMI | OSG | NS TOOL | NS TOOL | OSG | KYOWASEIKO | KYOWASEIKO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | UNION TOOL | NS TOOL |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Carbide End Mill, Phoenix, Long Neck, Tough Radius PHX-LN-CRE | TSC Series Carbide Radius End Mill, 2-Flute/1.5D Flute Length (Stub) Model | Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute/Long Model | CBN End Mill (Small Diam., 2-Flute, Long-Neck Radius Type) CBN-LN-SXR | TSC Series Carbide Radius End Mill, 4-Flute/Stub Model, ±0.005 Radius Precision | TSC Series Carbide Radius End Mill, 4-Flute/Stub Model, ±0.02 Radius Precision | TSC Series Carbide Radius End Mill, 4-Flute/Stub Model, Regrinding | TSC Series Carbide Long Neck Radius End Mill, 2-Flute, Long Neck Model | TSC Series Carbide Long Neck Radius End Mill, 4-Flute/Long Neck Model | TSC Series Carbide Tapered Neck Radius End Mill, 2-Flute/Tapered Neck Model | Carbide Radius End Mill for Resin Machining, 2-Flute/Regular Model | Non-Coated TS Coated Carbide 0.1mm Unit Radius Designated End Mill | 3-Flute, Short, Corner R Type for Copper / Aluminum Alloy CA-CR-ETS | 3-Flute, Multifunctional, Strong Model for Aluminum Alloy CA-PKE | 4-Flute, Unequal Lead, Corner R, Short, Strong Heavy-Cutting Model NEO-CR-PHS | 2-Flute, Corner Radius, Long Shank, Short Type for Graphite DIA-LS-CRED | 2-Flute/4-Flute Pencil-Neck / Long Neck Corner Radius Type DG-CPR | Carbide End Mill WX Super Coat (High Precision Bull Nose) WXS-CPR | HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius | ||||||||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||
Flute Diameter (D)(φ) | 0.8 ~ 6 | 0.4 ~ 6 | 0.8 ~ 3 | 6 ~ 12 | 1 ~ 12 | 6 ~ 12 | 6 ~ 25 | 3 ~ 12 | 1 ~ 6 | 0.5 ~ 3 | 0.3 ~ 3 | 0.3 ~ 2 | 2 ~ 6 | 1 ~ 12 | 3 ~ 20 | 2 ~ 12 | 1 ~ 20 | 1 ~ 20 | 2 ~ 12 | 1 ~ 12 | 1 ~ 12 | 1 ~ 12 | 0.2 ~ 6 | 1 ~ 6 | 0.2 ~ 3 | 1 ~ 10 | 1 ~ 20 | 2 ~ 20 | 6 ~ 20 | 3 ~ 20 | 3 ~ 12 | 3 ~ 20 | 0.5 ~ 2.5 | 1 ~ 12 | 6 ~ 12 | 3 ~ 20 | 3 ~ 20 | 16 ~ 20 | 3 ~ 25 | 5 ~ 11 | 3 ~ 20 | 0.5 ~ 12 | 0.2 ~ 4 | 0.2 ~ 6 | 1 ~ 6 |
R Size(mm) | 0.05 ~ 1 | 0.05 ~ 1 | 0.1 ~ 0.5 | - | 0.1 ~ 3 | 0.5 ~ 3 | 0.3 ~ 5 | 0.3 ~ 3 | 0.05 ~ 1 | 0.05 ~ 0.5 | - | - | 0.2 ~ 0.5 | 0.1 ~ 3 | 0.1 ~ 3 | 0.2 ~ 3 | 0.1 ~ 3 | 0.1 ~ 3 | 0.3 ~ 1 | 0.1 ~ 3 | 0.1 ~ 3 | 0.1 ~ 3 | 0.05 ~ 1 | 0.05 ~ 1 | 0.05 ~ 0.5 | 0.2 | 0.1 ~ 3 | 0.2 ~ 3 | 0.5 ~ 4 | 0.2 ~ 2 | 0.2 ~ 2 | 0.2 ~ 3 | 0.1 | 0.1 ~ 3 | 0.5 ~ 3 | 0.2 ~ 3 | 0.5 ~ 3 | 0.5 ~ 3 | 0.2 ~ 5 | 0.3 ~ 1 | 0.5 ~ 3 | 0.1 ~ 1 | 0.05 ~ 0.5 | 0.05 ~ 1 | 0.2 ~ 2 |
Work Material | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Cast Iron[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] | - | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] | High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] | High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[○/◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] / Copper[◎] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | Graphite[◎] | Aluminum[◎] / Copper[○] / Resin[◎] | Graphite[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[◎] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎] |
Flute Length (ℓ)(mm) | 0.48 ~ 4.8 | 0.4 ~ 6 | 0.32 ~ 1.2 | 13 ~ 26 | 1.5 ~ 18 | 30 ~ 60 | 12 ~ 50 | 8 ~ 26 | 0.8 ~ 5 | 0.3 ~ 1.8 | 0.3 ~ 2 | 0.5 ~ 1.5 | 3 ~ 9 | 3 ~ 30 | 8 ~ 38 | 3 ~ 18 | 2 ~ 40 | 3 ~ 60 | 3 ~ 18 | 1.5 ~ 18 | 2 ~ 24 | 3 ~ 36 | 0.16 ~ 12 | 1.5 ~ 12 | 0.16 ~ 6 | 3 ~ 30 | 4 ~ 60 | 6 ~ 38 | 13 ~ 38 | 4.5 ~ 30 | 7.5 ~ 26 | 8 ~ 38 | 0.7 ~ 3.7 | 2.5 ~ 26 | 20 ~ 40 | 8 ~ 38 | 4.5 ~ 30 | 48 ~ 56 | 6 ~ 50 | 10 ~ 22 | 4.5 ~ 30 | 0.9 ~ 12 | 0.15 ~ 4 | 0.2 ~ 6 | 3 ~ 18 |
Number of Flutes(sheet) | 4 | 2 | 4 | 4 | 2 | 4 | 6 | 4 | 4 | 2 | 2 | 3 | 4 | 2 | 4 | 2 | 2 | 2 | 4 | 4 | 4 | 4 | 2 | 4 | 2 | 2 | 2 ~ 4 | 2 | 4 | 4 | 4 | 4 | 2 | 2 | 2 | 3 | 3 | 4 | 4 | 2 | 3 | 2 ~ 4 | 2 ~ 4 | 2 | 2 |
Model | Long Neck Radius | Long Neck Radius | Long Neck Radius | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Long Neck Radius | Long Neck Radius | Regular Type | High-Feed Radius | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Long Neck Radius | Long Neck Radius | Tapered Neck Radius | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Long Neck Radius | Long Neck Radius | Long Neck Radius | Regular Type |
Overall Length (L)(mm) | 50 ~ 120 | 50 ~ 120 | 50 | 57 ~ 83 | 40 ~ 75 | 150 ~ 200 | 50 ~ 120 | 60 ~ 80 | 50 ~ 110 | 45 ~ 50 | 50 ~ 60 | 50 | 50 | 50 ~ 75 | 50 ~ 100 | 35 ~ 60 | 40 ~ 110 | 45 ~ 125 | 35 ~ 60 | 40 ~ 75 | 40 ~ 75 | 45 ~ 85 | 40 ~ 100 | 40 ~ 100 | 40 ~ 100 | 50 ~ 80 | 40 ~ 125 | 40 ~ 100 | 50 ~ 100 | 60 ~ 200 | 45 ~ 75 | 50 ~ 125 | 50 | 40 ~ 110 | 90 ~ 110 | 50 ~ 105 | 50 ~ 125 | 140 ~ 160 | 50 ~ 120 | 100 ~ 180 | 50 ~ 125 | 50 ~ 150 | 50 ~ 80 | 50 ~ 100 | 45 ~ 60 |
Link Diameter (d)(mm) | 4 ~ 6 | 4 ~ 6 | 4 | 6 ~ 12 | 4 ~ 12 | 6 ~ 12 | 6 ~ 25 | 6 ~ 12 | 4 ~ 6 | 4 ~ 6 | 4 | 4 | 6 | 4 ~ 12 | 4 ~ 20 | 4 ~ 12 | 4 ~ 20 | 4 ~ 20 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 6 | 4 ~ 6 | 4 ~ 6 | 3 ~ 10 | 4 ~ 20 | 4 ~ 20 | 6 ~ 20 | 6 ~ 20 | 6 ~ 12 | 6 ~ 20 | 6 | 4 ~ 12 | 6 ~ 12 | 6 ~ 20 | 6 ~ 20 | 16 ~ 20 | 6 ~ 25 | 4 ~ 10 | 6 ~ 20 | 4 ~ 12 | 4 ~ 6 | 4 ~ 6 | 4 ~ 6 |
Length Under Neck (ℓ1)(mm) | 2 ~ 48 | 1 ~ 60 | 2 ~ 16.65 | 21 ~ 38 | 14 ~ 45 | 60 ~ 85 | - | - | 3 ~ 48 | 2.5 ~ 12 | - | - | - | - | - | - | 17 ~ 45 | 23 ~ 55 | - | 14 ~ 45 | 17 ~ 45 | 23 ~ 55 | 1 ~ 40 | 3 ~ 40 | 1 ~ 60 | - | - | - | - | 12 ~ - | - | - | 1.5 ~ 5 | - | - | - | - | - | - | - | - | 4 ~ 60 | 0.5 ~ 35 | 0.5 ~ 30 | - |
Processing Applications | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Groove / Inclined Cutting | - | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) |
Coating | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Diamond Coat | For High Hardness (Silicone-Based) | Diamond Coat | TiAlN | For High Hardness (Silicone-Based) | TiAlN | - | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated | For High Hardness (Silicone-Based) / Non-Coated | DLC | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | Non-Coated | TiAlN | TiAlN | Diamond Coat | DLC | Non-Coated | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated |
Helix Angle (Θ) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) |
R Precision(µm) | - | - | 0~-0.01 | - | ±0.01 ~ ±0.02 | ±0.02 | - | - | 0.005~-0.005 ~ 0.01~-0.01 | ±0.005 | - | - | ±0.005 | ±0.02 | ±0.02 | ±0.01 | ±0.01 ~ ±0.02 | ±0.01 ~ ±0.02 | ±0.02 | ±0.01 ~ ±0.02 | ±0.01 ~ ±0.02 | ±0.01 ~ ±0.02 | ±0.005 ~ ±0.01 | ±0.005 ~ ±0.01 | ±0.005 ~ ±0.01 | ±0.02 | ±0.02 | -0.032~-0.059 ~ -0.014~-0.028 | - | -0.032~-0.059 ~ -0.014~-0.028 | 0~-0.030 ~ 0~-0.015 | -0.032~-0.059 ~ -0.014~-0.028 | - | - | - | - | - | - | - | - | - | - | - | - | 0.02~-0.02 |
Loading...
[5-36/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy