(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
C-CRS UT Coated 2-Flute Radius
UNION TOOL
•Model: Regular Type
•Number Of Flutes (sheet): 2
•Coating: TiCN
Days to Ship: | 9 Days or more |
---|
XAL Series Carbide Radius End Mill, 3-Flute, 45° Torsion/Regular Model
MISUMI
3-blade 45° helix radius that's resistant to chattering is available at an affordable price [C-Value]
Days to Ship: | 8 Days or more |
---|
2-Flute, Corner R Long Type FX-CR-MG-EDL
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
Days to Ship: | 8 Days or more |
---|
3-Flute, Short, Corner R Type for Copper / Aluminum Alloy CA-CR-ETS
OSG
Even with aluminum part machining requiring large volumes of cutting, the unique groove form simultaneously achieves superior chip discharge performance, large cutting depth and a high feed rate.
Days to Ship: | 8 Days or more |
---|
HLRS2000 HM Coated 2 Flute Long-Neck Radius
UNION TOOL
•Model: Long Neck Radius
•Number Of Flutes (sheet): 2
•Helix Angle (Θ): Standard Helix (30 to 40°)
•Coating: For High Hardness (Silicone-Based)
•Blade Diameter Tolerance (mm): 0~-0.015
Days to Ship: | 8 Days or more |
---|
NS TOOL
•Model: Regular Type
•Number Of Flutes (sheet): 2
•Helix Angle (Θ): Standard Helix (30 to 40°)
•Coating: Non-Coated
•R Precision (µm): 0.02~-0.02
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Radius End Mill (for Shrinkage Fitting), 3-Flute, 45° Spiral/Stub Model
MISUMI
Further suppresses chattering using the shrink-fit holder
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Radius End Mill, 3-Flute, 45° Spiral/Stub Model
MISUMI
A popular multi-functional square with stub blade length
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Radius End Mill, 3-Flute, 45° Spiral/Short Model
MISUMI
A short blade length that allows plunging without chattering
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Radius End Mill, 3-Flute, 45° Spiral/Regular Model
MISUMI
Resistant to chattering, it has improved durability and excellent cutting performance
Days to Ship: | 8 Days or more |
---|
DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute/Regular Flute Length Model
MISUMI
The radius-equipped type prevents cutter marks and also shows effectiveness in improving the surface roughness
Days to Ship: | 8 Days or more |
---|
Carbide Radius End Mill for Aluminum Machining, 3-Flute/Regular Flute Length Model
MISUMI
Radius type that's also effective in preventing cutter marks
Days to Ship: | 8 Days or more |
---|
VAC Series Carbide 2-Flute Radius End Mill
MISUMI
[Features]
·Cutting edge radius also reinforced cutting edge rigid
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Days to Ship: | 8 Days or more |
---|
VAC Series Carbide 4-Flute Uneven Lead Radius End Mill
MISUMI
[Features]
·Suppresses chattering with unequal lead and unequal flutes
·Stable machining is possible while maintaining finished surface accuracy
·Cutting edge radius also reinforced cutting edge rigid
·Can process heat-treated steel up to 50HRC
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Days to Ship: | 8 Days or more |
---|
VAC Series Carbide 2-Flute Long Neck Radius End Mill
MISUMI
[Features]
·Effective for deep cutting due to long neck type
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Cutting edge radius also reinforced cutting edge rigid
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Days to Ship: | 8 Days or more |
---|
VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill
MISUMI
[Features]
·Effective for deep cutting due to long neck type
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Cutting edge radius also reinforced cutting edge rigid
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
End mill for aluminum and copper alloys. Capable of rounding corners of grooves.
Days to Ship: | 8 Days or more |
---|
2-Flute, Corner R, Short Type GX-CR-EDS-SF
OSG
Carbide mushroom-shaped end mill with rounded corners developed for shrink-fit types.
Days to Ship: | 8 Days or more |
---|
2-Flute, Corner R Short Type CBN-CR-EDS
OSG
Excellent for machining high-hardness materials
Days to Ship: | 8 Days or more |
---|
2-Flute, Corner R Short Type FX-CR-EDS-6
OSG
End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.
Days to Ship: | 8 Days or more |
---|
2-Flute, Corner R Short Type FX-CR-MG-EDS
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
Days to Ship: | 8 Days or more |
---|
New DLC Coating Carbide End Mill, 2-Flute Short Type for Aluminum Alloy DLC-AIR-EDS
OSG
End mill for aluminum alloy based on the concept of ultra-high speed machining. Ideal for high-efficiency processing of large aluminum parts for aircrafts, etc.
Days to Ship: | 8 Days or more |
---|
3-Flute, for Aluminum Alloy CA-MFE-SF
OSG
Streak generation is suppressed by rounding the shank end face
Days to Ship: | 8 Days or more |
---|
Carbide End Mill, Phoenix (High Feed Bull Nose) PHX-CRT
OSG
Corner radius type with a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.
Days to Ship: | 8 Days or more |
---|
Carbide End Mill, Phoenix (Deep Feeder Radius) PHX-DFR
OSG
Adopts an ultra-heat-resistant and ultra-hard WXS coating
Days to Ship: | 8 Days or more |
---|
3-Flute, Multifunctional, Strong Model for Aluminum Alloy CA-PKE
OSG
High-rigidity recessed short blade that can be used for everything from roughing to finishing using various cutter paths.
Days to Ship: | 8 Days or more |
---|
2-Flute, Corner Radius, Long Shank, Short Type for Graphite DIA-LS-CRED
OSG
Thin vertical wall milling tool for graphite electrode. The step processing prevents chattering and chipping. A rounded blade is used for the shank side as well.
Days to Ship: | 8 Days or more |
---|
WX21 Carbide End Mill (Super Radius) WX-CRE
OSG
A new type of radius end mill that achieves high-efficiency rough machining of molds. Capable of direct high-performance engraving of hardened steel.
Days to Ship: | 8 Days or more |
---|
Heavy Duty Multi-Function DLC-PKE
OSG
Ultra-smooth DLC coating enables semi-dry processing as well as high speed processing of aluminum.
Days to Ship: | 8 Days or more |
---|
2-Flute/4-Flute Pencil-Neck / Long Neck Corner Radius Type DG-CPR
OSG
A dedicated graphite coating with excellent abrasion resistance.
Days to Ship: | 8 Days or more |
---|
Carbide End Mill WX Super Coat (High Precision Bull Nose) WXS-CPR
OSG
High-precision bull nose (radius) end mill for shape processing of molds. High-speed cutting of hardened steel is also possible thanks to the WXS coating with excellent heat resistance.
Days to Ship: | 8 Days or more |
---|
Phoenix Pencil Neck Deep Feeder Radius PHX-PC-DFR
OSG
Adopts an ultra-heat-resistant and ultra-hard WXS coating
Days to Ship: | 8 Days or more |
---|
Long-Neck Deep Feeder Radius PHX-LN-DFR
OSG
Adopts an ultra-heat-resistant and ultra-hard WXS coating
Days to Ship: | 8 Days or more |
---|
HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius
UNION TOOL
•Model: Long Neck Radius
•Number Of Flutes (sheet): 2
•Helix Angle (Θ): Standard Helix (30 to 40°)
•Coating: For High Hardness (Silicone-Based)
•Blade Diameter Tolerance (mm): 0~-0.01
Days to Ship: | 8 Days or more |
---|
SSR200 CBN Super Speed Radius End Mill
NS TOOL
•Model: Regular Type
•Number Of Flutes (sheet): 2
•Helix Angle (Θ): No Helix/ None
•Coating: Non-Coated
•R Precision (µm): 0.005~-0.005
Days to Ship: | 8 Days or more |
---|
MSRS230 MUGEN-COATING 2-Flute Radius End Mill
NS TOOL
•Model: Regular Type
•Number Of Flutes (sheet): 2
•Helix Angle (Θ): Standard Helix (30 to 40°)
•Coating: TiAlN
•(γ) Neck Angle (°): 9°
Days to Ship: | 8 Days or more |
---|
MSTNR230 MUGEN-COATING Long Tapered Neck Radius End Mill
NS TOOL
•Model: Tapered Neck Radius
•Number Of Flutes (sheet): 2
•Helix Angle (Θ): Standard Helix (30 to 40°)
•Coating: TiAlN
•R Precision (µm): 0.005~-0.005
Days to Ship: | 8 Days or more |
---|
MHRH230R MUGEN-COATING PREMIUM 2-Flute Long Neck Radius End Mill for Hardened Steels
NS TOOL
•Model: Long Neck Radius
•Number Of Flutes (sheet): 2
•Helix Angle (Θ): Standard Helix (30 to 40°)
•Coating: For High Hardness (Silicone-Based)
•R Precision (µm): 0.005~-0.005
Days to Ship: | 8 Days or more |
---|
CBN End Mill (Small Diam., 2-Flute, Corner Radius End Mill) CBN-SXR
OSG
The rounded 3D shape makes it resistant to chipping.
Days to Ship: | 8 Days or more |
---|
CBN End Mill (Small Diam., 2-Flute, Long-Neck Radius Type) CBN-LN-SXR
OSG
Blade uses a sintered CBN material.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Specifications |
Flute Diameter (D)(φ) |
R Size(mm) |
Work Material |
Flute Length (ℓ)(mm) |
Number of Flutes(sheet) |
Model |
Overall Length (L)(mm) |
Link Diameter (d)(mm) |
Length Under Neck (ℓ1)(mm) |
Processing Applications |
Coating |
Helix Angle (Θ) |
R Precision(µm) |
|
|
|
| |||||||||||||||||||||||||||||||||||||
Brand | UNION TOOL | MISUMI | OSG | OSG | UNION TOOL | NS TOOL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Nachi-Fujikoshi | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | UNION TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | OSG | OSG |
Product Series | XAL Series Carbide Radius End Mill, 3-Flute, 45° Torsion/Regular Model | 3-Flute, Short, Corner R Type for Copper / Aluminum Alloy CA-CR-ETS | TSC Series Carbide Radius End Mill (for Shrinkage Fitting), 3-Flute, 45° Spiral/Stub Model | TSC Series Carbide Radius End Mill, 3-Flute, 45° Spiral/Stub Model | TSC Series Carbide Radius End Mill, 3-Flute, 45° Spiral/Short Model | TSC Series Carbide Radius End Mill, 3-Flute, 45° Spiral/Regular Model | DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute/Regular Flute Length Model | Carbide Radius End Mill for Aluminum Machining, 3-Flute/Regular Flute Length Model | VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill | New DLC Coating Carbide End Mill, 2-Flute Short Type for Aluminum Alloy DLC-AIR-EDS | 3-Flute, Multifunctional, Strong Model for Aluminum Alloy CA-PKE | 2-Flute, Corner Radius, Long Shank, Short Type for Graphite DIA-LS-CRED | 2-Flute/4-Flute Pencil-Neck / Long Neck Corner Radius Type DG-CPR | Carbide End Mill WX Super Coat (High Precision Bull Nose) WXS-CPR | HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius | MHRH230R MUGEN-COATING PREMIUM 2-Flute Long Neck Radius End Mill for Hardened Steels | CBN End Mill (Small Diam., 2-Flute, Corner Radius End Mill) CBN-SXR | CBN End Mill (Small Diam., 2-Flute, Long-Neck Radius Type) CBN-LN-SXR | ||||||||||||||||||||||
Days to Ship | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Specifications |
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||
Flute Diameter (D)(φ) | 3 ~ 6 | 3 ~ 12 | 6 ~ 12 | 3 ~ 20 | 0.4 ~ 6 | 1 ~ 6 | 3 ~ 12 | 3 ~ 12 | 3 ~ 12 | 3 ~ 20 | 2 ~ 12 | 2 ~ 12 | 1 ~ 12 | 1.5 ~ 12 | 0.4 ~ 12 | 1 ~ 12 | 2 ~ 20 | 10 ~ 20 | 3 ~ 6 | 0.5 ~ 2.5 | 1 ~ 12 | 12 ~ 25 | 18 ~ 22 | 1 ~ 5 | 6 ~ 20 | 3 ~ 20 | 5 ~ 11 | 2 | 3 ~ 20 | 0.5 ~ 3 | 0.2 ~ 3 | 2 ~ 12 | 4 ~ 16 | 0.2 ~ 6 | 0.2 ~ 2 | 1 ~ 5 | 0.2 ~ 3 | 0.2 ~ 0.9 | 0.5 ~ 3 | 0.5 ~ 3 |
R Size(mm) | 0.3 ~ 2 | 0.2 ~ 2 | 0.5 ~ 3 | 0.2 ~ 3 | 0.05 ~ 1 | 0.2 ~ 2 | 0.3 ~ 1 | 0.5 ~ 1 | 0.3 ~ 2 | 0.2 ~ 2 | 0.2 ~ 1 | 0.2 ~ 1 | 0.1 ~ 3 | 0.2 ~ 3 | 0.1 ~ 1 | 0.2 ~ 1 | 0.2 ~ 3 | 0.5 ~ 1 | 0.2 ~ 2 | 0.1 | 0.1 ~ 3 | 1 ~ 3 | 1 | 0.3 ~ 1 | 1.5 ~ 3 | 0.5 ~ 3 | 0.3 ~ 1 | 0.5 | 0.5 ~ 3 | 0.1 ~ 0.2 | 0.05 ~ 0.5 | 0.5 ~ 2 | 1 ~ 3 | 0.05 ~ 1 | 0.02 ~ 0.5 | 0.1 ~ 1.5 | 0.05 ~ 0.5 | 0.05 ~ 0.2 | 0.05 ~ 0.5 | 0.05 ~ 0.5 |
Work Material | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Cast Iron[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] | Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] | Aluminum[◎] / Copper[◎] / Resin[○] | Graphite[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Cast Iron[◎] | Aluminum[◎] / Copper[○] / Resin[◎] | Graphite[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Copper[◎] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] |
Flute Length (ℓ)(mm) | 10 ~ 15 | 16 ~ 38 | 20 ~ 40 | 8 ~ 38 | 0.4 ~ 6 | 3 ~ 18 | 4.5 ~ 18 | 4.5 ~ 18 | 5 ~ 26 | 5 ~ 56 | 5 ~ 36 | 5 ~ 36 | 2.5 ~ 30 | 4 ~ 30 | 0.6 ~ 18 | 1.5 ~ 30 | 6 ~ 38 | 10 ~ 20 | 3 ~ 6 | 0.7 ~ 3.7 | 2.5 ~ 26 | 14 ~ 27 | 18 ~ 22 | 2 ~ 10 | 12 ~ 40 | 4.5 ~ 30 | 10 ~ 22 | 0.8 | 4.5 ~ 30 | 0.9 ~ 4.5 | 0.15 ~ 2.5 | 3 ~ 18 | 6 ~ 24 | 0.2 ~ 6 | 0.08 ~ 1.2 | 2 ~ 10 | 0.15 ~ 2.5 | 0.15 ~ 0.7 | 0.3 ~ 1.8 | 0.3 ~ 1.8 |
Number of Flutes(sheet) | 2 | 3 | 2 | 3 | 2 | 2 | 3 | 3 | 3 | 3 | 3 | 3 | 2 | 4 | - | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 2 | 3 | 3 | 2 | 2 | 3 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
Model | Regular Type | Regular Type | Regular Type | Regular Type | Long Neck Radius | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Long Neck Radius | Long Neck Radius | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Long Neck Radius | Long Neck Radius | Long Neck Radius | Long Neck Radius | Long Neck Radius | Regular Type | Regular Type | Tapered Neck Radius | Long Neck Radius | Regular Type | Long Neck Radius |
Overall Length (L)(mm) | 45 ~ 50 | 60 ~ 100 | 90 ~ 110 | 50 ~ 105 | 50 ~ 120 | 45 ~ 60 | 40 ~ 65 | 60 ~ 100 | 60 ~ 100 | 60 ~ 130 | 40 ~ 80 | 40 ~ 80 | 50 ~ 130 | 50 ~ 150 | 40 ~ 100 | 50 ~ 110 | 40 ~ 100 | 32 ~ 58 | 45 ~ 50 | 50 | 40 ~ 110 | 90 ~ 110 | 51 ~ 60 | 60 ~ 70 | 80 ~ 150 | 50 ~ 125 | 100 ~ 180 | 60 | 50 ~ 125 | 50 ~ 100 | 50 ~ 80 | 60 ~ 220 | 70 ~ 175 | 50 ~ 100 | 48 ~ 53 | 60 ~ 70 | 50 ~ 110 | 45 ~ 50 | 45 ~ 50 | 45 ~ 50 |
Link Diameter (d)(mm) | 6 | 6 ~ 12 | 6 ~ 12 | 6 ~ 20 | 4 ~ 6 | 4 ~ 6 | 6 ~ 12 | 6 ~ 12 | 6 ~ 12 | 6 ~ 20 | 4 ~ 12 | 4 ~ 12 | 6 ~ 12 | 6 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 20 | 6 ~ 12 | 6 | 6 | 4 ~ 12 | 12 ~ 25 | 10 ~ 12 | 6 | 6 ~ 20 | 6 ~ 20 | 4 ~ 10 | 6 | 6 ~ 20 | 4 | 4 ~ 6 | 6 ~ 20 | 4 ~ 16 | 4 ~ 6 | 4 | 4 ~ 6 | 4 ~ 6 | 4 | 4 ~ 6 | 4 ~ 6 |
Length Under Neck (ℓ1)(mm) | - | - | - | - | 1 ~ 60 | - | - | 14 ~ 68 | 18 ~ 70 | 26 ~ 92 | 23 ~ 50 | 23 ~ 50 | - | - | 2 ~ 50 | 4 ~ 50 | - | - | - | 1.5 ~ 5 | - | 40 ~ 56 | - | 4 ~ 15 | - | - | - | 5 | - | 4 ~ 60 | 0.5 ~ 35 | 10 ~ 160.8 | 20 ~ 120 | 0.5 ~ 30 | 0.5 ~ 10 | - | 1 ~ 60 | 0.5 ~ 8 | 1.5 ~ 6 | 2.5 ~ 12 |
Processing Applications | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) | Thrust (Z-Feed) |
Coating | TiCN | For General Steel (AlCrN etc.) | TiAlN | Non-Coated | For High Hardness (Silicone-Based) | Non-Coated | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | DLC | Non-Coated | - | - | - | - | DLC | For General Steel (AlCrN etc.) | Non-Coated | TiAlN | TiAlN | DLC | Non-Coated | TiAlN | For High Hardness (Silicone-Based) | Non-Coated | Diamond Coat | TiAlN | DLC | Non-Coated | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated | TiAlN | TiAlN | For High Hardness (Silicone-Based) | - | - |
Helix Angle (Θ) | - | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | - | - | - | - | Standard Helix (30 to 40°) | No Helix/ None | No Helix/ None | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | No Helix/ None | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | No Helix/ None | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | No Helix/ None | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | - | Standard Helix (30 to 40°) |
R Precision(µm) | - | ±0.02 | - | - | - | 0.02~-0.02 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.02 | ±0.01 ~ ±0.02 | - | - | - | - | -0.032~-0.059 ~ -0.014~-0.028 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.005~-0.005 | 0.005~-0.005 ~ 0.01~-0.01 | 0.005~-0.005 | 0.005~-0.005 | - | ±0.005 |
Loading...
[5-56/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy