(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Carbide Ball End Mill（R Precision：0.01～-0.01）
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
RSB230 Ball-End Mill for Resin Clear Cut
NS TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: Non-Coated
•With/Without Torsion: Available- Volume Discount
Days to Ship: 8 Days or more -
Long-Neck Ball End Mill (for Deep Ribs) NHB-2
NS TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: Non-Coated
•R Precision (µm): 0.01～-0.01
•With/Without Torsion: Available- Volume Discount
Days to Ship: 8 Days or more -
Aluminum Ball-End Mill (DLC Coating) ALB225-DLC
NS TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: DLC
•Work Material: Aluminum
•R Precision (µm): 0.01～-0.01- Volume Discount
Days to Ship: 8 Days or more -
NS TOOL
•Model: Bore
•Number Of Flutes (sheet): 3
•Coating: TiAlN
•R Precision (µm): 0.01～-0.01
•With/Without Torsion: Available- Volume Discount
Days to Ship: 8 Days or more -
NS TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: TiAlN
•With/Without Torsion: Available- Volume Discount
Days to Ship: 8 Days or more -
MSBH230 2-Flute Ball-End Mill for High-Hardness
NS TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: For High Hardness (Silicone-Based)
•With/Without Torsion: Available
•(γ) Neck Angle (°): 12- Volume Discount
Days to Ship: 8 Days or more -
MSBH345 3-Flute Ball-End Mill for High-Hardness
NS TOOL
•Model: Bore
•Number Of Flutes (sheet): 3
•Coating: For High Hardness (Silicone-Based)
•R Precision (µm): 0.01～-0.01
•Link Diameter (d) (mm): 6- Volume Discount
Days to Ship: 8 Days or more -
DHB Long Neck Ball End Mill for Copper Electrode / Aluminum / Plastic (for Deep Rib)
NS TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: Non-Coated
•R Precision (µm): 0.01～-0.01
•With/Without Torsion: Available- Volume Discount
Days to Ship: 8 Days or more -
MSB230 MUGEN-COATING 2-Flute Ball End Mill
NS TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: TiAlN
•With/Without Torsion: Available- Volume Discount
Days to Ship: 8 Days or more -
MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)
NS TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: TiAlN
•With/Without Torsion: Available
•(γ) Neck Angle (°): 15- Volume Discount
Days to Ship: 8 Days or more -
MSB230S MUGEN-COATING Short Ball End Mill
NS TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: TiAlN
•With/Without Torsion: Available
•(γ) Neck Angle (°): 9- Volume Discount
Days to Ship: 8 Days or more -
MRBTN230 MUGEN-COATING Long Tapered Neck Ball End Mill
NS TOOL
•Model: Tapered Neck Bore
•Number Of Flutes (sheet): 2
•Coating: TiAlN
•With/Without Torsion: Available
•(γ) Neck Angle 2 (°): 12°- Volume Discount
Days to Ship: 8 Days or more -
MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)
NS TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: TiAlN
•With/Without Torsion: Available
•(γ) Neck Angle (°): 12- Volume Discount
Days to Ship: 8 Days or more -
MSBL230 MUGEN-COATING Long Ball End Mill
NS TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: TiAlN
•R Precision (µm): 0.01～-0.01
•With/Without Torsion: Available- Volume Discount
Days to Ship: 8 Days or more -
MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels
NS TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: TiAlN
•With/Without Torsion: Available- Volume Discount
Days to Ship: 8 Days or more -
NS TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: Non-Coated
•R Precision (µm): 0.01～-0.01
•Overall Length (L) (mm): 35- Volume Discount
Days to Ship: 8 Days or more -
X Coated Miniature Ball-End Mill NCB-2X
NS TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: TiCN
•R Precision (µm): 0.01～-0.01
•Overall Length (L) (mm): 35- Volume Discount
Days to Ship: 8 Days or more -
NS TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: TiCN
•With/Without Torsion: Available
•(γ) Neck Angle (°): 9- Volume Discount
Days to Ship: 8 Days or more -
NS TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: Non-Coated
•R Precision (µm): 0.01～-0.01
•With/Without Torsion: Available- Volume Discount
Days to Ship: 8 Days or more -
Diamond Coating, Long-Neck Ball End Mill DCRB230
NS TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: Diamond Coat
•R Precision (µm): 0.01～-0.01
•With/Without Torsion: Available- Volume Discount
Days to Ship: 8 Days or more -
Ball End Mill for Copper Electrode / Aluminum / Plastic DB
NS TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: Non-Coated
•R Precision (µm): 0.01～-0.01
•With/Without Torsion: Available- Volume Discount
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| R Size(mm) |
| Model |
| Work Material |
| Flute Length (ℓ)(mm) |
| Number of Flutes(sheet) |
| Coating |
| Overall Length (L)(mm) |
| Length Under Neck (ℓ1)(mm) |
| Link Diameter (d)(mm) |
| R Precision(µm) |
| Processing Applications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL |
| Product Series | DHB Long Neck Ball End Mill for Copper Electrode / Aluminum / Plastic (for Deep Rib) | MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting) | MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing) | MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels | |||||||||||||||||
| Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
| R Size(mm) | 0.25 ～ 3 | 0.4 ～ 3 | 0.3 ～ 6 | 0.5 ～ 6 | 0.3 ～ 3 | 4 ～ 6 | 0.5 ～ 3 | 0.5 ～ 3 | 3.5 ～ 6 | 4 ～ 6 | 1.25 ～ 6 | 0.25 ～ 2 | 1.75 ～ 3 | 0.1 ～ 5 | 0.25 ～ 3 | 0.2 ～ 0.9 | 0.2 ～ 0.9 | 1 ～ 4 | 0.3 ～ 6 | 0.2 ～ 3 | 0.5 ～ 3 |
| Model | Long Neck Bore | Long Neck Bore | Bore | Bore | Bore | Bore | Bore | Long Neck Bore | Bore | Bore | Bore | Tapered Neck Bore | Long Neck Bore | Bore | Bore | Bore | Bore | Bore | Bore | Long Neck Bore | Bore |
| Work Material | Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | Aluminum[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Resin[○] | Aluminum[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[◎] |
| Flute Length (ℓ)(mm) | 1.5 ～ 30 | 0.6 ～ 6 | 0.45 ～ 24 | 1.5 ～ 20 | 0.6 ～ 6 | 12 ～ 20 | 1.5 ～ 10 | 1.5 ～ 9 | 10.5 ～ 20 | 8 ～ 12 | 2.5 ～ 12 | 0.5 ～ 4 | 2.8 ～ 6 | 0.5 ～ 25 | 0.5 ～ 6 | 0.8 ～ 3.6 | 0.8 ～ 3.6 | 3 ～ 13 | 0.45 ～ 24 | 0.3 ～ 6 | 2 ～ 12 |
| Number of Flutes(sheet) | 2 | 2 | 2 | 3 | 2 | 2 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Coating | Non-Coated | Non-Coated | DLC | TiAlN | TiAlN | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | TiCN | TiCN | Non-Coated | Diamond Coat | Non-Coated |
| Overall Length (L)(mm) | 50 ～ 130 | 45 ～ 120 | 60 ～ 120 | 60 ～ 120 | 35 ～ 45 | 90 ～ 100 | 60 ～ 80 | 50 ～ 110 | 80 ～ 110 | 60 | 60 ～ 110 | 50 ～ 110 | 60 ～ 120 | 70 ～ 200 | 50 ～ 60 | 35 | 35 | 60 ～ 90 | 60 ～ 120 | 45 ～ 120 | 45 ～ 80 |
| Length Under Neck (ℓ1)(mm) | 6 ～ 80 | 6 ～ 50 | 3 ～ 60 | - | 1.5 ～ 15 | - | - | 4 ～ 50 | - | - | - | 3 ～ 60 | 10 ～ 50 | - | 1.25 ～ 15 | - | - | - | 3 ～ 60 | 1 ～ 60 | - |
| Link Diameter (d)(mm) | 3 ～ 6 | 4 ～ 6 | 4 ～ 12 | 6 ～ 12 | 4 ～ 6 | 8 ～ 12 | 6 | 4 ～ 8 | 6 ～ 12 | 8 ～ 12 | 4 ～ 12 | 4 ～ 8 | 6 | 3 ～ 10 | 4 ～ 6 | 3 | 3 | 4 ～ 8 | 4 ～ 12 | 4 ～ 6 | 4 ～ 6 |
| R Precision(µm) | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 |
| Processing Applications | Curved Surface / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove |
Loading...
Configure
Specification/Dimensions
-
Metric / Inch
- metric
-
R Size(mm)
- 0.005
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.04
- 0.05
- R0.05
- 0.075
- 0.1
- R0.1
- 0.125
- 0.15
- R0.15
- 0.175
- 0.2
- R0.2
- 0.225
- 0.25
- R0.25
- 0.275
- 0.3
- R0.3
- 0.325
- 0.35
- R0.35
- 0.375
- 0.4
- R0.4
- 0.425
- 0.45
- R0.45
- 0.475
- 0.5
- R0.5
- 0.55
- R0.55
- 0.6
- R0.6
- 0.65
- R0.65
- 0.7
- R0.7
- 0.75
- R0.75
- 0.8
- R0.8
- 0.85
- R0.85
- 0.9
- R0.9
- 0.95
- R0.95
- 1
- R1
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- R1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- R2
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- R2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.55
- 2.6
- 2.65
- 2.7
- 2.75
- R2.75
- 2.8
- 2.85
- 2.9
- 2.95
- 3
- R3
- R 3.0
- 3.05
- 3.1
- 3.15
- 3.175
- 3.2
- 3.25
- R3.25
- 3.3
- 3.35
- 3.4
- 3.45
- 3.5
- R3.5
- 3.55
- 3.6
- 3.65
- 3.7
- 3.75
- R3.75
- 3.8
- 3.85
- 3.9
- 3.95
- 4
- R4
- 4.05
- 4.1
- 4.15
- 4.2
- 4.25
- R4.25
- 4.3
- 4.35
- 4.4
- 4.45
- 4.5
- R4.5
- 4.55
- 4.6
- 4.65
- 4.7
- 4.75
- 4.8
- 4.85
- 4.9
- 4.95
- 5
- R5
- 5.05
- 5.1
- 5.15
- 5.2
- 5.25
- 5.3
- 5.35
- 5.4
- 5.45
- 5.5
- R5.5
- 5.55
- 5.6
- 5.65
- 5.7
- 5.75
- 5.8
- 5.85
- 5.9
- 5.95
- 6
- R6
- 6.05
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.45
- 6.5
- 6.55
- 6.6
- 6.65
- 6.7
- 6.75
- 6.8
- 6.85
- 6.9
- 6.95
- 7
- 7.05
- 7.1
- 7.15
- 7.2
- 7.25
- 7.3
- 7.35
- 7.4
- 7.45
- 7.5
- 7.55
- 7.6
- 7.65
- 7.7
- 7.75
- 7.8
- 7.85
- 7.9
- 7.95
- 8
- 8.05
- 8.1
- 8.15
- 8.2
- 8.25
- 8.3
- 8.35
- 8.4
- 8.45
- 8.5
- 8.55
- 8.6
- 8.65
- 8.7
- 8.75
- 8.8
- 8.85
- 8.9
- 8.95
- 9
- 9..5
- 9.05
- 9.1
- 9.15
- 9.2
- 9.25
- 9.3
- 9.35
- 9.4
- 9.45
- 9.5
- 9.55
- 9.6
- 9.65
- 9.7
- 9.75
- 9.8
- 9.85
- 9.9
- 9.95
- 10
- 10.25
- 10.5
- 10.75
- 11
- 11.5
- 12
- 12.25
- 12.5
- 12.75
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 22
- 22.5
- 23
- 24
- 25
-
Model
- Bore
- Long Neck Bore
- Tapered Neck Bore
- Spherical Bore
-
Work Material
-
Flute Length (ℓ)(mm)
-
0.01～0.96
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.2
- 0.21
- 0.23
- 0.24
- 0.28
- 0.3
- 0.32
- 0.35
- 0.38
- 0.4
- 0.42
- 0.45
- 0.48
- 0.49
- 0.5
- 0.56
- 0.6
- 0.63
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.76
- 0.8
- 0.84
- 0.9
- 0.95
- 0.96
-
1～1.9
- 1
- 1.05
- 1.1
- 1.12
- 1.2
- 1.25
- 1.26
- 1.28
- 1.3
- 1.4
- 1.44
- 1.45
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
-
3～3.9
- 3
- 3.2
- 3.25
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.85
- 3.9
-
4～4.8
- 4
- 4.1
- 4.2
- 4.25
- 4.4
- 4.5
- 4.75
- 4.8
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.9
-
6～6.9
- 6
- 6.2
- 6.25
- 6.3
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.5
- 7
- 7.1
- 7.2
- 7.4
- 7.5
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.9
-
9～9.7
- 9
- 9.5
- 9.7
-
10～10.5
- 10
- 10.5
-
11～11.5
- 11
- 11.2
- 11.5
-
12～12.7
- 12
- 12.5
- 12.7
-
13～13.5
- 13
- 13.5
-
14～14.5
- 14
- 14.5
-
15
-
16～16.5
- 16
- 16.5
-
18
-
19
-
20
-
22
-
23
-
24
-
25
-
26
-
28
-
30
-
32
-
34
-
35
-
36
-
38
-
40
-
45
-
48
-
50
-
55
-
58
-
60
-
65
-
70
-
80
-
90
-
100
-
110
-
120
-
130
-
-
Number of Flutes(sheet)
-
Coating
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Link Diameter (d)(mm)
-
R Precision(µm)
-
Processing Applications
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- NS TOOL (21)
- Poulten&Graf (0)
- S&K (0)
- VAN HOORN (0)
- OSG (0)
- GUHRING (0)
- CREATE TOOL (0)
- ATOM (0)
- OKAZAKI (0)
- Nachi-Fujikoshi (0)
- UNION TOOL (0)
- DIJET (0)
- 7 LEADERS (0)
- KYOWASEIKO (0)
- ASAHI TOOLS (0)
- EIKOSHA (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy