(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
2-Flute, Miniature Short Type for Copper / Aluminum Alloy / Plastic CRN-EDS-3
OSG
The highly lubricating CrN coating exhibits excellent performance when machining copper alloy, aluminum alloy, and plastic. Ideal for fine processing of copper electrodes and IT parts made of copper alloy.
Days to Ship: | 8 Days or more |
---|
2-Flute, Long Type for Copper / Aluminum Alloy / Plastic CRN-EDL-4
OSG
The highly lubricating CrN coating exhibits excellent performance when machining copper alloy, aluminum alloy, and plastic. Provides a glossy and beautiful finished surface when used for copper electrode processing.
Days to Ship: | 8 Days or more |
---|
2-Flute, Long Type for Copper / Aluminum Alloy CA-RG-EDL
OSG
For copper and aluminum alloys. Good sharpness, and a special blade shape for preventing chatter and vibrations that allows a good finished surface to be achieved.
Days to Ship: | 8 Days or more |
---|
OSG
Original ultra-smooth new DLC coating prevents adhesion. Capable of high-speed and high-efficiency machining of aircraft aluminum parts, etc.
Days to Ship: | 8 Days or more |
---|
4-Flute, Extra-Long Type FX-MG-EXML
OSG
General purpose type 4-flute ultra-long blade end mill with FX coating for excellent heat resistance.
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
4-Flute, Short Type for Graphite DG-EMS
OSG
End mill with diamond coating dedicated for graphite.
Days to Ship: | 8 Days or more |
---|
OSG
General purpose type 4-flute end mill with FX coating for excellent heat resistance. Can be used for both high-speed and high-feed processing.
Days to Ship: | 8 Days or more |
---|
OSG
General-purpose 4-flute end mill in which high toughness carbide is used as the base material. Can be used for a wide range of work materials and enables highly reliable processing.
Days to Ship: | 7 Days or more |
---|
OSG
Blade length is 1.5 times the blade diameter, an ultra-short blade that is ideal for high speed machining with high speed machining centers.
Days to Ship: | 8 Days or more |
---|
4-Flute Stub Type ("Guts" Mill) WX-G-EMSS
OSG
Heavy duty type 4-flute end mill with reinforced bottom blade corner. Capable of high-speed and high-feed cutting thanks to its rigid short blade length. Enables reductions in lead time during mass production machining.
Days to Ship: | 8 Days or more |
---|
4-Flute, Slim Shank, Short Type FX-SS-EMS
OSG
Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.
Days to Ship: | 8 Days or more |
---|
OSG
General purpose type 4-flute long blade end mill with FX coating for excellent heat resistance.
Days to Ship: | 8 Days or more |
---|
4-Flute, Short Type for Copper / Aluminum Alloy / Plastic CRN-EMS
OSG
CrN coating and sharp blade shape enables precision finish of copper and copper alloy.
Days to Ship: | 8 Days or more |
---|
2-Flute Regular Type for Graphite GF-EDR
OSG
Adopts carbide alloy as the base material for extremely excellent wear resistance. Realizes a longer service life with graphite machining.
Days to Ship: | 8 Days or more |
---|
2-Flute Long Shank Regular Type for Graphite GF-LS-EDR
OSG
Adopts carbide alloy as the base material for extremely excellent wear resistance. Realizes a longer service life with graphite machining.
Days to Ship: | 8 Days or more |
---|
2-Flute Long Type for Graphite GF-EDL
OSG
Adopts carbide alloy as the base material for extremely excellent wear resistance. Realizes a longer service life with graphite machining.
Days to Ship: | 8 Days or more |
---|
4-Flute Regular Type for Graphite GF-EMR
OSG
Adopts carbide alloy as the base material for extremely excellent wear resistance. Realizes a longer service life with graphite machining.
Days to Ship: | 8 Days or more |
---|
4-Flute Long Shank Regular Type for Graphite GF-LS-EMR
OSG
Adopts carbide alloy as the base material for extremely excellent wear resistance. Realizes a longer service life with graphite machining.
Days to Ship: | 8 Days or more |
---|
4-Flute Long Type for Graphite GF-EML
OSG
Adopts carbide alloy as the base material for extremely excellent wear resistance. Realizes a longer service life with graphite machining.
Days to Ship: | 8 Days or more |
---|
Multi-Flute, Short (Uneven Lead) NEO-EMS
OSG
Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.
Days to Ship: | 8 Days or more |
---|
2-Flute, Long Neck, Short Type DLC-LN-EDS
OSG
Short-blade, long-neck type end mill with ultra-smooth DLC coating. Demonstrates its abilities when used with rolled aluminum alloys, etc., where welding is a problem.
Days to Ship: | 8 Days or more |
---|
2-Flute, Long Neck, Short Type FX-LN-EDS-6
OSG
End mill long neck type for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers.
Days to Ship: | 8 Days or more |
---|
WXL-Coated 2-Flute Long Neck Short Type (Deep Ribbed Type) WXL-LN-EDS
OSG
[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applications. Multiple variations available.
Days to Ship: | 8 Days or more |
---|
2-Flute, Long Neck, Short Type (Deep Rib Type) WX-LN-EDS
OSG
Ideal for rib groove machining or machining detailed components when there is a problem with interference, etc. Select the effective length according to the processing.
Days to Ship: | 8 Days or more |
---|
2-Flute, Long Neck, Short Type for Copper / Aluminum Alloy / Plastic CRN-LN-EDS
OSG
Short blade with long neck shape and high rigidity that enables high efficiency, high precision machining even with large blade exposure. Ideal for high-speed / high-precision machining of copper electrodes.
Days to Ship: | 8 Days or more |
---|
4-Flute, Long Neck, Short Type for Graphite DG-LN-EMS
OSG
End mill with diamond coating dedicated for graphite.
Days to Ship: | 8 Days or more |
---|
4-Flute, Long Neck, Short Type FX-LN-EMS-6
OSG
End mill long neck type for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers.
Days to Ship: | 8 Days or more |
---|
HLS4000, HM Coated 4-Flute Long Neck Square
UNION TOOL
•Model: Long Neck Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: For High Hardness (Silicone-Based)
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
C-CES2000S UT Coat, 2-Flute Square (Sharp Corner)
UNION TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: TiCN
•Number Of Flutes (sheet): 2
Days to Ship: | 10 Days or more |
---|
C-CES4000 UT Coat, 4-Flute Square
UNION TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiCN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
C-CES4000S UT Coat, 4-Flute Square (Sharp Corner)
UNION TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: TiCN
•Number Of Flutes (sheet): 4
Days to Ship: | 10 Days or more |
---|
CPRL for Resin Processing, 2-Flute Long Neck, Long Shank Square
UNION TOOL
•Model: Long Neck Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
•Shank Taper Angle Bta (°): 11°
Days to Ship: | 8 Days or more |
---|
CPR for Resin Processing, 2-Flute Long Neck Square
UNION TOOL
•Model: Long Neck Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
•Shank Taper Angle Bta (°): 11°
Days to Ship: | 8 Days or more |
---|
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MHRH230 2-Flute Long Neck End Mill for High-Hardness
NS TOOL
•Model: Long Neck Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: For High Hardness (Silicone-Based)
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
RSE230 End Mill for Resin Clear Cut
NS TOOL
•Model: Long Neck Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MSES230P MUGEN-COATING 2-Flute Sharp Edge Short End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MSEM230 MUGEN-COATING 2-Flute Medium End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MSE430 MUGEN-COATING 4-Flute End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MSE430P MUGEN-COATING 4-Flute Sharp Edge End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MSEM430 MUGEN-COATING 4-Flute Medium End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
MHR230 MUGEN-COATING 2-Flute Long Neck End Mill (for Deep Ribbing)
NS TOOL
•Model: Long Neck Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Flute Diameter (D)(φ) |
Work Material |
Flute Length (ℓ)(mm) |
Number of Flutes(sheet) |
Model |
Coating |
Link Diameter (d)(mm) |
Overall Length (L)(mm) |
Length Under Neck (ℓ1)(mm) |
Processing Applications |
Flute Shape |
Helix Angle (θ) |
Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | 2-Flute, Miniature Short Type for Copper / Aluminum Alloy / Plastic CRN-EDS-3 | 2-Flute, Long Type for Copper / Aluminum Alloy / Plastic CRN-EDL-4 | 4-Flute, Short Type for Copper / Aluminum Alloy / Plastic CRN-EMS | WXL-Coated 2-Flute Long Neck Short Type (Deep Ribbed Type) WXL-LN-EDS | 2-Flute, Long Neck, Short Type for Copper / Aluminum Alloy / Plastic CRN-LN-EDS | CPRL for Resin Processing, 2-Flute Long Neck, Long Shank Square | MHR230 MUGEN-COATING 2-Flute Long Neck End Mill (for Deep Ribbing) | ||||||||||||||||||||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 7 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Flute Diameter (D)(φ) | 0.5 ~ 3 | 1 ~ 3 | 3 ~ 12 | 3 ~ 20 | 3 ~ 30 | 3 ~ 12 | 4 ~ 12 | 2 ~ 30 | 2 ~ 10 | 3 ~ 16 | 3 ~ 12 | 8 ~ 12 | 3 ~ 30 | 3 ~ 12 | 2 ~ 12 | 2 ~ 12 | 2 ~ 12 | 2 ~ 12 | 2 ~ 12 | 2 ~ 12 | 6 ~ 25 | 0.5 ~ 6 | 0.5 ~ 2.5 | 0.2 ~ 5 | 0.1 ~ 6 | 0.5 ~ 12 | 1 ~ 6 | 1 ~ 6 | 1 ~ 6 | 0.2 ~ 12 | 1 ~ 20 | 1 ~ 12 | 0.5 ~ 4 | 0.5 ~ 6 | 0.5 ~ 12 | 0.5 ~ 12 | 0.5 ~ 11.9 | 0.1 ~ 3 | 0.1 ~ 6 | 0.1 ~ 12 | 0.5 ~ 12 | 1 ~ 12 | 1 ~ 12 | 1 ~ 20 | 0.1 ~ 6 |
Work Material | Aluminum[○] / Copper[◎] / Resin[◎] | Aluminum[○] / Copper[◎] / Resin[◎] | Aluminum[◎] / Copper[◎] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[○] / Graphite[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel – HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel – HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel – HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel – HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel – HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[○] / Copper[◎] / Resin[◎] | Graphite[◎] | Graphite[◎] | Graphite[◎] | Graphite[◎] | Graphite[◎] | Graphite[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | Aluminum[◎] / Copper[○] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel – HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[○] / Copper[◎] / Resin[◎] | Aluminum[○] / Graphite[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | Aluminum[○] / Copper[◎] / Resin[◎] | Aluminum[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] |
Flute Length (ℓ)(mm) | 1.5 ~ 8 | 4 ~ 15 | 12 ~ 40 | 8 ~ 38 | 20 ~ 112 | 20 ~ 90 | 8 ~ 24 | 6 ~ 45 | 6 ~ 22 | 4.5 ~ 24 | 4.5 ~ 18 | 20 ~ 30 | 12 ~ 67 | 8 ~ 26 | 10 ~ 65 | 10 ~ 65 | 20 ~ 130 | 10 ~ 65 | 10 ~ 65 | 20 ~ 130 | 12 ~ 50 | 0.7 ~ 9 | 0.7 ~ 3.7 | 0.3 ~ 7.5 | 0.15 ~ 9 | 0.7 ~ 18 | 2 ~ 12 | 1.5 ~ 9 | 1 ~ 6 | 0.3 ~ 36 | 2.5 ~ 48 | 2.5 ~ 26 | 1 ~ 8 | 1 ~ 12 | 1 ~ 24 | 1.5 ~ 36 | 2 ~ 47.6 | 0.08 ~ 4.5 | 0.3 ~ 50 | 0.15 ~ 24 | 2 ~ 48 | 2.5 ~ 30 | 2.5 ~ 30 | 4 ~ 80 | 0.15 ~ 9 |
Number of Flutes(sheet) | 2 | 2 | 2 | 3 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 2 | 2 | 2 | 4 | 4 | 4 | 6 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 2 |
Model | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long Neck Square | Long Neck Square | Long Neck Square | Long Neck Square | Long Neck Square | Long Neck Square | Long Neck Square | Long Neck Square | Square | Square | Square | Long Neck Square | Long Neck Square | Square | Square | Square | Long Neck Square | Long Neck Square | Square | Square | Square | Square | Square | Long Neck Square |
Coating | CrN | CrN | Non-Coated | DLC | TiAlN | Non-Coated | DG | For General Steel (AlCrN etc.) | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | CrN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN | DLC | TiAlN | For General Steel (AlCrN etc.) | TiAlN | CrN | DG | TiAlN | For High Hardness (Silicone-Based) | TiCN | TiCN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) | Non-Coated | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
Link Diameter (d)(mm) | 3 | 4 | 6 ~ 12 | 6 ~ 20 | 6 ~ 32 | 6 ~ 12 | 4 ~ 12 | 4 ~ 32 | 4 ~ 10 | 6 ~ 16 | 6 ~ 12 | 7 ~ 11 | 6 ~ 32 | 6 ~ 12 | 4 ~ 12 | 4 ~ 12 | 6 ~ 12 | 4 ~ 12 | 4 ~ 12 | 6 ~ 12 | 6 ~ 25 | 6 | 6 | 4 ~ 6 | 4 ~ 6 | 6 ~ 12 | 4 ~ 6 | 6 | 4 ~ 6 | 4 ~ 12 | 4 ~ 20 | 4 ~ 12 | 4 ~ 6 | 3 ~ 6 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 6 | 3 ~ 6 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 20 | 4 ~ 6 |
Overall Length (L)(mm) | 40 | 45 ~ 50 | 50 ~ 90 | 50 ~ 105 | 60 ~ 225 | 60 ~ 150 | 80 ~ 120 | 40 ~ 125 | 40 ~ 70 | 50 ~ 100 | 50 ~ 75 | 100 ~ 110 | 50 ~ 145 | 70 ~ 140 | 75 ~ 130 | 100 ~ 200 | 100 ~ 200 | 75 ~ 130 | 100 ~ 200 | 100 ~ 200 | 50 ~ 120 | 60 ~ 90 | 60 | 45 ~ 120 | 45 ~ 120 | 60 ~ 140 | 50 ~ 100 | 60 ~ 90 | 50 ~ 110 | 45 ~ 90 | 45 ~ 110 | 45 ~ 75 | 80 ~ 100 | 38 ~ 120 | 40 ~ 75 | 40 ~ 85 | 45 ~ 105 | 45 ~ 100 | 45 ~ 130 | 45 ~ 80 | 50 ~ 110 | 45 ~ 80 | 45 ~ 80 | 50 ~ 140 | 45 ~ 120 |
Length Under Neck (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 20 ~ 85 | 25 ~ 130 | 25 ~ 80 | 20 ~ 85 | 25 ~ 130 | 25 ~ 80 | - | 2.5 ~ 30 | 2.5 ~ 12.5 | 0.5 ~ 60 | 0.3 ~ 60 | 2.5 ~ 60 | 5 ~ 60 | 5 ~ 30 | 4 ~ 50 | - | - | - | 4 ~ 40 | 2 ~ 63 | - | - | - | 0.3 ~ 50 | 0.8 ~ 80 | - | - | - | - | - | 0.3 ~ 60 |
Processing Applications | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting |
Flute Shape | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Corner | Sharp Corner | Sharp Corner | With Lead | Sharp Corner | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Corner / With Lead | With Lead | Sharp Corner / With Lead | With Lead | With Lead | Sharp Corner / With Lead | With Lead | Sharp Corner | With Lead | Sharp Corner | Sharp Corner / With Lead | Sharp Corner / With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Corner | Sharp Corner | With Lead | With Lead | Sharp Corner | With Lead | With Lead |
Helix Angle (θ) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) |
Loading...
[4-60/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy