(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Carbide Square End Mill（Work Material：High-Hardness Steel ~ HRC55）
Search by specifying the lower class category
High Helix End Mills (Carbide)
Long Neck Square End Mills (Carbide)
Multi-Function Square End Mills (Carbide)
Roughing End Mills (Carbide)
Square End Mills (Carbide)
| Days to Ship |
|
|---|
-
OSG
General purpose type 4-flute end mill with FX coating for excellent heat resistance. Can be used for both high-speed and high-feed processing.
- Volume Discount
Days to Ship: 8 Days or more -
OSG
General purpose type 4-flute long blade end mill with FX coating for excellent heat resistance.
- Volume Discount
Days to Ship: 8 Days or more -
MHRH230 2-Flute Long Neck End Mill for High-Hardness
NS TOOL
•Model: Long Neck Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: For High Hardness (Silicone-Based)
•Number Of Flutes (sheet): 2- Volume Discount
Days to Ship: 8 Days or more -
SAGC2T SA Coated Carbide 2-Flute Short Blade
S&K
[Features]
· Machining is possible with a wide range of materials, from raw materials to hardened steel.
· A general-purpose 2-flute type with pin angle specification.- Volume Discount
Days to Ship: 8 Days or more -
VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Effective for processing deep parts due to extra long blade length
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Spec Expansion
- Price Reduction
Days to Ship: 8 Days or more -
GCT+ 4 Flutes Anti-Vibration Core Power
GCT
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Number Of Flutes (sheet): 4
•Coating: TiSiN
•Vibration Damping Proofing: Available- Volume Discount
Days to Ship: 8 Days or more -
2-Flute Stub Type ("Guts" Mill) WX-G-EDSS
OSG
Heavy duty type 2-flute end mill with reinforced bottom blade corner. Capable of heavy cutting thanks to its rigid short blade length. Enables reductions in lead time during mass production machining.
- Volume Discount
Days to Ship: 8 Days or more -
WXL-Coated 4-Flute Short WXL-EMS
OSG
[Features]
· With its WXL hard lubricating coating, this end mill offers effective cutting performance on a wide range of materials, including general steel, quenched steel and copper alloys.
Recommended for both wet-type and dry-type milling.- Volume Discount
Days to Ship: 8 Days or more -
4-Flute, Short (Vibration Proof Model, Multifunctional) UP-PHS
OSG
A multi-functional end mill which minimizes chatter to allow highly efficient machining of grooves and side walls.
- Volume Discount
Days to Ship: 8 Days or more -
WXL-Coated 2-Flute Long Neck Short Type (Deep Ribbed Type) WXL-LN-EDS
OSG
[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applications. Multiple variations available.- Volume Discount
Days to Ship: 8 Days or more -
C-CES2000 UT Coat, 2-Flute Square
UNION TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiCN
•Number Of Flutes (sheet): 2- Volume Discount
Days to Ship: 8 Days or more -
TSC Series Carbide Multi-Functional Square End Mill, 4-Flute, 45° Spiral/Short Model
MISUMI
For durability, choose the 4-blade type among the multi-functional machining series
- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more -
TSC Series Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model
MISUMI
Compatible with deeper side milling
- Volume Discount
- TS
- General Steel
- 4 Flutes
- L (Long)
Days to Ship: 8 Days or more -
TSC Series Carbide Radius End Mill for Countersink, 3-Flute/Short Model
MISUMI
A low blade flat type with the blade shape that's ideal for counter boring
- Volume Discount
- Price Reduction
- TS
- General Steel
- 3 Flutes
- S (Short)
Days to Ship: 8 Days or more -
XAC Series Carbide Roughing End Mill, Fine Pitch/Regular Model
MISUMI
Strongly compatible with the cost reduction of roughing with the limited special price for standard sizes [C-Value]
- Volume Discount
- TiAlN
- General Steel
- R (Regular)
Days to Ship: Same day or more Show Stock Products
-
TSC Series Carbide Roughing End Mill, Fine Pitch/Long Model
MISUMI
A single unit compatible with both the roughing and medium roughing
- Volume Discount
- TS
- General Steel
- 4 Flutes
- L (Long)
Days to Ship: 8 Days or more -
MISUMI
TS coated high-helix type with excellent oxidation resistance and hardness
- Volume Discount
- TS
- High-Hardness Steel
- Multi-Flutes （5 ~）
- R (Regular)
Days to Ship: Same day Show Stock Products
-
Nachi-Fujikoshi
The GS hard coating makes it ideal for ultra-high-speed machining of high-hardness materials.
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
Supports a wide range of applications from raw materials to high hardness steel.
- Volume Discount
Days to Ship: 8 Days or more -
OSG
A general-purpose 2-flute end mill which uses a high-toughness carbide alloy as its base material for excellent stability. Can be used for a wide range of work materials and enables highly reliable processing.
- Volume Discount
Days to Ship: 8 Days or more -
4-Flute, Short (Strong Heavy-Cutting Model / Uneven Lead Type) NEO-PHS
OSG
Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.
- Volume Discount
Days to Ship: 8 Days or more -
Deep Engraving Compatible Type Multifunction FXS-HPE
OSG
Since it has a long shank, it enables high-efficiency machining even when working on wall grooves, with no concern required for interference.
- Volume Discount
Days to Ship: 8 Days or more -
C-CES4000 UT Coat, 4-Flute Square
UNION TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiCN
•Number Of Flutes (sheet): 4- Volume Discount
Days to Ship: 8 Days or more -
MX230 MUGEN-COATING 2-Flute LEAD 30 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2- Volume Discount
Days to Ship: 8 Days or more -
MHR430 MUGEN-COATING 4-Flute Long Neck End Mill (for Deep Ribbing)
NS TOOL
•Model: Long Neck Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4- Volume Discount
Days to Ship: 8 Days or more -
SAGCα SA Coated Carbide α Nick
S&K
[Features]
· With a unique roughing blade shape, heavy machining and high speed machining are possible- Volume Discount
Days to Ship: 10 Days or more -
SPSED2A SP Series Square End Mill 2-Flute OK Coated
OKAZAKI
A 2-flute OK coated end mill which can be used for a wide range of machining applications, from raw materials to stainless steel.
- Volume Discount
Days to Ship: 8 Days or more -
Emphasis On Accuracy / Finished Surface 2-Blades Blade Pin Card 2FESM (Medium)
KYOCERA
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: For General Steel (AlCrN etc.)
•Number Of Flutes (sheet): 2- Volume Discount
Days to Ship: 8 Days or more -
Axel Mill, High Feed High Efficiency Type, 4MFK (Square Type)
KYOCERA
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: For General Steel (AlCrN etc.)
•Number Of Flutes (sheet): 4- Volume Discount
Days to Ship: 9 Days or more -
TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Stub Model
MISUMI
The short blade length of the blade diameter x 1.5 is capable of high speed and high feed machining
- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Days to Ship: 8 Days or more -
TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Short Model
MISUMI
Thrusting in the Z direction, lateral driving and waging can be performed by this single unit
- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Days to Ship: 8 Days or more -
TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/SR Flute Length
MISUMI
Can be used on rough surfaces. Intermediate blade length between short and regular
- Volume Discount
- TS
- General Steel
- 3 Flutes
- SR
Days to Ship: 8 Days or more -
TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Regular Model
MISUMI
Single unit capable of thrusting in the Z direction, lateral driving and waging.
- Volume Discount
- TS
- General Steel
- 3 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Long Model
MISUMI
A long blade length that's capable of processing deep standing walls in a single shot
- Volume Discount
- TS
- General Steel
- 3 Flutes
- L (Long)
Days to Ship: 8 Days or more -
TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Long Shank, Short Model
MISUMI
A long shank type that exhibits power in deep sections of a workpiece
- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Days to Ship: 8 Days or more -
TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Stub Model
MISUMI
The blade length type of 1.5 times the outer diameter that's capable of high-speed high feed machining
- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Days to Ship: 8 Days or more -
TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/SR Flute Length Model
MISUMI
Can be used on rough surfaces. Intermediate blade length between short and regular
- Volume Discount
- TS
- General Steel
- 4 Flutes
- SR
Days to Ship: 8 Days or more -
TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Regular Model
MISUMI
Choose the 4-blade type for durability in any processing, such as grooving and side milling
- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Long Model
MISUMI
A long blade with rigid form that prevents chattering
- Volume Discount
- Price Reduction
- TS
- General Steel
- 4 Flutes
- L (Long)
Days to Ship: 8 Days or more -
TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Long Shank, Short Model
MISUMI
Popular long shank type is available at a reasonable price
- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more -
TSC Series Carbide End Mill for Key Grooves, 2-Flute/Short Model
MISUMI
The standard key grooving end mills that are sorted by tolerance have been significantly reduced in price
- Volume Discount
- Price Reduction
- TS
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 8 Days or more -
TSC Series Carbide Long Neck Square End Mill, 3-Flute, 45° Spiral/Long Neck Model
MISUMI
A long neck type of multi-functional square that allows high feeding and has excellent durability
- Volume Discount
- TS
- General Steel
- 3 Flutes
Days to Ship: 8 Days or more -
MISUMI
The high precision high helical end mill for shrink fit holder is ideal for side finishing
- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- B (Stub)
Days to Ship: 8 Days or more -
TSC Series Carbide High-helical End Mill (Cutting Edge Deflection Accuracy of 5μm or less)
MISUMI
The high-precision side finishing type for machining raw materials such as carbon steel
- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- R (Regular)
Days to Ship: 8 Days or more -
TSC Series Carbide High-helical End Mill, multi-flute, 53° Spiral/Short Model
MISUMI
The strong helix of positive blade is ideal in the standing-wall finishing of raw materials
- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- S (Short)
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Flute Diameter (D)(φ) |
| Work Material |
| Flute Length (ℓ)(mm) |
| Number of Flutes(sheet) |
| Model |
| Coating |
| Link Diameter (d)(mm) |
| Overall Length (L)(mm) |
| Length Under Neck (ℓ1)(mm) |
| Processing Applications |
| Flute Shape |
| Helix Angle (θ) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | NS TOOL | S&K | MISUMI | GCT | OSG | OSG | OSG | OSG | UNION TOOL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Nachi-Fujikoshi | Nachi-Fujikoshi | OSG | OSG | OSG | UNION TOOL | NS TOOL | NS TOOL | S&K | OKAZAKI | KYOCERA | KYOCERA | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model) | 4-Flute, Short (Vibration Proof Model, Multifunctional) UP-PHS | WXL-Coated 2-Flute Long Neck Short Type (Deep Ribbed Type) WXL-LN-EDS | TSC Series Carbide Multi-Functional Square End Mill, 4-Flute, 45° Spiral/Short Model | TSC Series Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model | TSC Series Carbide Radius End Mill for Countersink, 3-Flute/Short Model | XAC Series Carbide Roughing End Mill, Fine Pitch/Regular Model | 4-Flute, Short (Strong Heavy-Cutting Model / Uneven Lead Type) NEO-PHS | MHR430 MUGEN-COATING 4-Flute Long Neck End Mill (for Deep Ribbing) | Emphasis On Accuracy / Finished Surface 2-Blades Blade Pin Card 2FESM (Medium) | Axel Mill, High Feed High Efficiency Type, 4MFK (Square Type) | TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Stub Model | TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Short Model | TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/SR Flute Length | TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Regular Model | TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Long Model | TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Long Shank, Short Model | TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Stub Model | TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/SR Flute Length Model | TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Regular Model | TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Long Model | TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Long Shank, Short Model | TSC Series Carbide End Mill for Key Grooves, 2-Flute/Short Model | TSC Series Carbide Long Neck Square End Mill, 3-Flute, 45° Spiral/Long Neck Model | TSC Series Carbide High-helical End Mill (Cutting Edge Deflection Accuracy of 5μm or less) | TSC Series Carbide High-helical End Mill, multi-flute, 53° Spiral/Short Model | |||||||||||||||||||
| Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Same day
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||
| Flute Diameter (D)(φ) | 2 ～ 30 | 3 ～ 30 | 0.1 ～ 3 | 0.5 ～ 20 | 1.5 ～ 25 | 3 ～ 20 | 1 ～ 12 | 1 ～ 30 | 3 ～ 12 | 0.2 ～ 5 | 0.1 ～ 20 | 1 ～ 20 | 1 ～ 12 | 3 ～ 16 | 6 ～ 20 | 6 ～ 20 | 16 | 1 ～ 20 | 2 ～ 20 | 9 ～ 12 | 3 ～ 25 | 10 ～ 14 | 1 ～ 20 | 0.1 ～ 12 | 1 ～ 10 | 5 ～ 25 | 1 ～ 25 | 0.2 ～ 16 | 3 ～ 16 | 1 ～ 12 | 1 ～ 20 | 3 ～ 16 | 1 ～ 20 | 2 ～ 20 | 2 ～ 20 | 1 ～ 16 | 3 ～ 16 | 1 ～ 20 | 2 ～ 20 | 2 ～ 22 | 2 ～ 14 | 1 ～ 6 | 3 ～ 12 | 3 ～ 12 | 1 ～ 12 |
| Work Material | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[◎] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[◎] | High-Hardness Steel ~ HRC55[◎] | High-Hardness Steel ~ HRC55[◎] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[◎] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[◎] | High-Hardness Steel ~ HRC55[◎] | High-Hardness Steel ~ HRC55[◎] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] | High-Hardness Steel ~ HRC55[○] |
| Flute Length (ℓ)(mm) | 6 ～ 45 | 12 ～ 67 | 0.08 ～ 4.5 | 1 ～ 45 | 6 ～ 120 | 8 ～ 45 | 1.5 ～ 18 | 2.5 ～ 45 | 8 ～ 26 | 0.3 ～ 7.5 | 0.15 ～ 48 | 3 ～ 38 | 4 ～ 48 | 8 ～ 32 | 16 ～ 38 | 25 ～ 65 | 40 | 3 ～ 38 | 10 ～ 56 | 19 ～ 26 | 6 ～ 50 | 15 ～ 21 | 2.5 ～ 48 | 0.2 ～ 24 | 1.5 ～ 15 | 15 ～ 60 | 2.5 ～ 45 | 0.4 ～ 32 | 4.5 ～ 48 | 1.5 ～ 18 | 3 ～ 38 | 5 ～ 40 | 4 ～ 56 | 5 ～ 75 | 3.5 ～ 30 | 1.5 ～ 24 | 5 ～ 40 | 4 ～ 56 | 5 ～ 75 | 3.5 ～ 30 | 3 ～ 21 | 1.5 ～ 13 | 4.5 ～ 18 | 10 ～ 30 | 2 ～ 24 |
| Number of Flutes(sheet) | 4 | 4 | 2 | 2 | 4 | 4 | 2 | 4 | 4 | 2 | 2 | 4 | 4 | 3 | 3 ～ 4 | 4 | 6 | 4 ～ 8 | 4 | 2 | 4 | 4 | 4 | 2 | 4 | 4 | 2 | 2 | 4 | 3 | 3 | 3 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | 4 | 2 | 3 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 |
| Model | Square | Square | Long Neck Square | Square | Square | Square | Square | Square | Square | Long Neck Square | Square | Square | Square | Square | Roughing | Roughing | Highly-Helical | Square | Square | Square | Square | Square | Square | Square | Long Neck Square | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long Neck Square | Highly-Helical | Highly-Helical | Highly-Helical |
| Coating | For General Steel (AlCrN etc.) | TiAlN | For High Hardness (Silicone-Based) | TiAlN | - | - | TiAlN | For General Steel (AlCrN etc.) | TiAlN | For General Steel (AlCrN etc.) | TiCN | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | TiAlN | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiCN | TiAlN | TiAlN | TiAlN | TiAlN | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) |
| Link Diameter (d)(mm) | 4 ～ 32 | 6 ～ 32 | 4 ～ 6 | 3 ～ 20 | 4 ～ 25 | 6 ～ 20 | 4 ～ 12 | 4 ～ 32 | 6 ～ 12 | 4 ～ 6 | 3 ～ 20 | 4 ～ 20 | 4 ～ 12 | 6 ～ 16 | 6 ～ 20 | 6 ～ 20 | 16 | 6 ～ 20 | 4 ～ 20 | 10 ～ 12 | 6 ～ 25 | 8 ～ 12 | 4 ～ 20 | 4 ～ 12 | 4 ～ 10 | 6 ～ 25 | 4 ～ 25 | 4 ～ 16 | 6 ～ 16 | 6 ～ 12 | 4 ～ 20 | 6 ～ 16 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 16 | 6 ～ 16 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 16 | 4 ～ 6 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 |
| Overall Length (L)(mm) | 40 ～ 125 | 50 ～ 145 | 45 ～ 100 | 50 ～ 115 | 60 ～ 250 | 50 ～ 100 | 40 ～ 75 | 40 ～ 125 | 60 ～ 100 | 45 ～ 120 | 38 ～ 110 | 60 ～ 110 | 45 ～ 100 | 50 ～ 110 | 57 ～ 104 | 100 ～ 150 | 110 | 50 ～ 100 | 50 ～ 125 | 70 ～ 75 | 50 ～ 120 | 130 ～ 160 | 45 ～ 110 | 45 ～ 80 | 50 ～ 150 | 60 ～ 140 | 45 ～ 120 | 45 ～ 90 | 60 ～ 110 | 60 ～ 100 | 60 ～ 110 | 60 ～ 110 | 60 ～ 130 | 60 ～ 150 | 80 ～ 200 | 60 ～ 110 | 60 ～ 110 | 60 ～ 130 | 60 ～ 150 | 80 ～ 200 | 45 ～ 75 | 50 ～ 100 | 50 ～ 75 | 60 ～ 100 | 60 ～ 100 |
| Length Under Neck (ℓ1)(mm) | - | - | 0.3 ～ 50 | - | - | - | - | - | - | 0.5 ～ 60 | - | 18 ～ 72 | 29 ～ 70 | - | - | 30 ～ 112 | - | - | - | - | - | - | - | - | 4 ～ 80 | 22 ～ 55 | - | - | - | 14 ～ 68 | 18 ～ 73 | 22 ～ 78 | 26 ～ 92 | 30 ～ 112 | 30 ～ 140 | 14 ～ 74 | 22 ～ 78 | 26 ～ 92 | 30 ～ 112 | 30 ～ 140 | - | 4 ～ 60 | - | - | 17 ～ 70 |
| Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting |
| Flute Shape | Sharp Corner | With Lead | With Lead | Sharp Corner | - | - | With Lead | Sharp Corner / With Lead | With Lead | With Lead | With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner | C Surface | Ultra-Small R | Ultra-Small R | With Lead | With Lead | Sharp Corner | With Lead | With Lead | With Lead | With Lead | With Lead | C Surface | Sharp Corner | Sharp Corner | With Lead | With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner | With Lead | Sharp Corner | Sharp Corner | Sharp Corner |
| Helix Angle (θ) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | - | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Weak Helix (15 to 25°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Weak Helix (15 to 25°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Metric / Inch
- metric
-
Flute Diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6H
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8H
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10H
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12H
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
Work Material
-
Flute Length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12
-
12～12.9
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.4
- 26.5
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.5
- 27.6
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.8
-
29～29.7
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.7
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.6
- 47
- 47.2
- 47.5
- 47.6
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57～57.5
- 57
- 57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60
-
62
-
63
-
64
-
65
-
66
-
67
-
70
-
72
-
75
-
76
-
78
-
80
-
82
-
83
-
85
-
90
-
95
-
100
-
103
-
106
-
110
-
112
-
115
-
120
-
125
-
130
-
150
-
200
[5-75/1mm Unit(s)]
-
-
Number of Flutes(sheet)
-
Model
- Square
- Roughing
- Long Neck Square
- Highly-Helical
-
Coating
-
Link Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
-
Flute Shape
-
Helix Angle (θ)
Narrow search by specifying Manufacturer
-
- NS TOOL (44)
- OSG (36)
- Nachi-Fujikoshi (34)
- KYOCERA (14)
- S&K (13)
- UNION TOOL (11)
- OKAZAKI (8)
- 7 LEADERS (6)
- ASAHI TOOLS (6)
- DIJET (5)
- Poulten&Graf (3)
- GCT (2)
- VAN HOORN (2)
- EIKOSHA (0)
- PROCHI (0)
- ATOM (0)
- KYOWASEIKO (0)
- TAIYO TOOL (0)
- SANDVIK (0)
- GUHRING (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy