(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
LSU Long Shank Ultra 30 End Mill AH10
ASAHI TOOLS
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: C Surface
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
SPSED2A SP Series Square End Mill 2-Flute OK Coated
OKAZAKI
A 2-flute OK coated end mill which can be used for a wide range of machining applications, from raw materials to stainless steel.
Days to Ship: | 8 Days or more |
---|
Emphasis On Accuracy / Finished Surface 2-Blades Blade Pin Card 2FESM (Medium)
KYOCERA
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: For General Steel (AlCrN etc.)
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
Axel Mill, High Feed High Efficiency Type, 4MFK (Square Type)
KYOCERA
•Model: Square
•Helix Angle (θ): Powerful Helix (45° to 60°)
•Flute Shape: With Lead
•Coating: For General Steel (AlCrN etc.)
•Number Of Flutes (sheet): 4
Days to Ship: | 9 Days or more |
---|
Carbide End Mill for Rib KRE-2
KYOWASEIKO
Lineup of blade diameters from φ0.2 to φ6 in 0.1 increments. Longer neck section for deep machining.
Days to Ship: | 10 Days or more |
---|
XAL Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Torsion/Short Model
MISUMI
The new "standard" square end mill with 45° spiral is available at an ultra-low price [C-Value]
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Torsion/Short Model
MISUMI
The new "standard" square end mill with 45° spiral is available at an ultra-low price [C-Value]
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model
MISUMI
The Misumi's original fine intermediate blade length is available at a reasonable price[C-Value]
Days to Ship: | 8 Days or more |
---|
XAC Series Carbide Square End Mill, 2-Flute/Short Model
MISUMI
Standard TiAlN coat [C-Value] series
Days to Ship: | 8 Days or more |
---|
XAC Series Carbide Square End Mill, 4-Flute/Short Model
MISUMI
Standard TiAlN coat [C-Value] series
Days to Ship: | 8 Days or more |
---|
XAC Series Carbide Square End Mill, 4-Flute/Long Model
MISUMI
User friendly TiAlN coated series with long blade length [C-Value]
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Stub Model
MISUMI
The short blade length of the blade diameter x 1.5 is capable of high speed and high feed machining
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Short Model
MISUMI
Thrusting in the Z direction, lateral driving and waging can be performed by this single unit
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/SR Flute Length
MISUMI
Can be used on rough surfaces. Intermediate blade length between short and regular
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Regular Model
MISUMI
Single unit capable of thrusting in the Z direction, lateral driving and waging.
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Long Model
MISUMI
A long blade length that's capable of processing deep standing walls in a single shot
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Long Shank, Short Model
MISUMI
A long shank type that exhibits power in deep sections of a workpiece
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Stub Model
MISUMI
The blade length type of 1.5 times the outer diameter that's capable of high-speed high feed machining
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/SR Flute Length Model
MISUMI
Can be used on rough surfaces. Intermediate blade length between short and regular
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Regular Model
MISUMI
Choose the 4-blade type for durability in any processing, such as grooving and side milling
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Long Model
MISUMI
A long blade with rigid form that prevents chattering
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Long Shank, Short Model
MISUMI
Popular long shank type is available at a reasonable price
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill for Shrinkage Fitting, 2-Flute/1D Flute Length (Stub) Model
MISUMI
In addition to the stock items, the outer diameter can be specified in 0.01 mm increments through additional processing
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model
MISUMI
A short blade length (stub) series that's ideal for high-speed machining
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model
MISUMI
In addition to the stock items, the outer diameter can be specified in 0.01 mm increments through additional processing
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model
MISUMI
2-blade regular size that can be used in a wide range of applications
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/3.5D Flute Length Model
MISUMI
Lineups of fine intermediate blade length between regular and long are available only in MISUMI.
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model
MISUMI
Compatible with Deep Engraving.
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill for Shrinkage Fitting, 4-Flute/1D Flute Length (Stub) Model
MISUMI
Shrink-Fit Chuck Supported Type
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 4-Flute/2.5D Flute Length Model
MISUMI
The fine intermediate blade length between short and regular that's unique to Misumi
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model
MISUMI
A standard regular size with high versatility
Days to Ship: | Same day or more |
---|
Show Stock Products
TSC Series Carbide Square End Mill, 4-Flute/3.5D Flute Length Model
MISUMI
The fine intermediate blade length between regular and long that's unique to Misumi
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide End Mill for Key Grooves, 2-Flute/Short Model
MISUMI
The standard key grooving end mills that are sorted by tolerance have been significantly reduced in price
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model
MISUMI
Excellent in general versatility, it is a 2D blade length type that can be used in a wide range of applications
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model
MISUMI
The 3D blade length type that produces a high-quality finish compatible with a wide range of machining areas
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model
MISUMI
The 2D blade length type with high versatility achieves high-precision processing including grooving
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model
MISUMI
Achieves both high levels of machining precision and reduction of processing time in side milling
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Long Neck Square End Mill, 4-Flute/Long Neck Model
MISUMI
Classic 4-blade long neck is available in extensive sizes and low price
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Long Neck Square End Mill, 3-Flute, 45° Spiral/Long Neck Model
MISUMI
A long neck type of multi-functional square that allows high feeding and has excellent durability
Days to Ship: | 8 Days or more |
---|
MISUMI
The high precision high helical end mill for shrink fit holder is ideal for side finishing
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide High-helical End Mill (Cutting Edge Deflection Accuracy of 5μm or less)
MISUMI
The high-precision side finishing type for machining raw materials such as carbon steel
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide High-helical End Mill, multi-flute, 53° Spiral/Short Model
MISUMI
The strong helix of positive blade is ideal in the standing-wall finishing of raw materials
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide High-helical End Mill, Multi-flute, 53° Spiral/Regular Model
MISUMI
Strong helix that exhibits power in sharpening corners
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Roughing End Mill, Fine Pitch/Short Model
MISUMI
Achieves long life and high-speed machining at the same time
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Roughing End Mill, Fine Pitch/Regular Model
MISUMI
The fine pitch achieves excellent surface roughness after machining
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Specifications |
Flute Diameter (D)(φ) |
Work Material |
Flute Length (ℓ)(mm) |
Number of Flutes(sheet) |
Model |
Coating |
Link Diameter (d)(mm) |
Overall Length (L)(mm) |
Length Under Neck (ℓ1)(mm) |
Processing Applications |
Flute Shape |
Helix Angle (θ) |
|
|
| |||||||||||||||||||||||||||||||||||||||||||
Brand | ASAHI TOOLS | OKAZAKI | KYOCERA | KYOCERA | KYOWASEIKO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
Product Series | Emphasis On Accuracy / Finished Surface 2-Blades Blade Pin Card 2FESM (Medium) | Axel Mill, High Feed High Efficiency Type, 4MFK (Square Type) | XAL Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Torsion/Short Model | XAL Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Torsion/Short Model | XAL Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model | TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Stub Model | TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Short Model | TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/SR Flute Length | TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Regular Model | TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Long Model | TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Long Shank, Short Model | TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Stub Model | TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/SR Flute Length Model | TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Regular Model | TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Long Model | TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Long Shank, Short Model | TSC Series Carbide Square End Mill for Shrinkage Fitting, 2-Flute/1D Flute Length (Stub) Model | TSC Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model | TSC Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model | TSC Series Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model | TSC Series Carbide Square End Mill, 2-Flute/3.5D Flute Length Model | TSC Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model | TSC Series Carbide Square End Mill for Shrinkage Fitting, 4-Flute/1D Flute Length (Stub) Model | TSC Series Carbide Square End Mill, 4-Flute/2.5D Flute Length Model | TSC Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model | TSC Series Carbide Square End Mill, 4-Flute/3.5D Flute Length Model | TSC Series Carbide End Mill for Key Grooves, 2-Flute/Short Model | Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model | Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model | Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model | Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model | TSC Series Carbide Long Neck Square End Mill, 4-Flute/Long Neck Model | TSC Series Carbide Long Neck Square End Mill, 3-Flute, 45° Spiral/Long Neck Model | TSC Series Carbide High-helical End Mill (Cutting Edge Deflection Accuracy of 5μm or less) | TSC Series Carbide High-helical End Mill, multi-flute, 53° Spiral/Short Model | TSC Series Carbide High-helical End Mill, Multi-flute, 53° Spiral/Regular Model | TSC Series Carbide Roughing End Mill, Fine Pitch/Short Model | TSC Series Carbide Roughing End Mill, Fine Pitch/Regular Model | |||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Flute Diameter (D)(φ) | 13 ~ 40 | 1 ~ 25 | 0.2 ~ 16 | 3 ~ 16 | 0.2 ~ 6 | 1 ~ 12 | 2 ~ 20 | 1 ~ 20 | 1 ~ 20 | 2 ~ 20 | 3 ~ 12 | 1 ~ 12 | 1 ~ 20 | 3 ~ 16 | 1 ~ 20 | 2 ~ 20 | 2 ~ 20 | 1 ~ 16 | 3 ~ 16 | 1 ~ 20 | 2 ~ 20 | 2 ~ 22 | 0.5 ~ 12 | 0.5 ~ 20 | 0.1 ~ 20 | 0.2 ~ 20 | 0.5 ~ 12 | 1 ~ 12 | 2 ~ 12 | 1 ~ 16 | 1 ~ 20 | 1 ~ 16 | 2 ~ 14 | 0.2 ~ 12 | 0.2 ~ 12 | 1 ~ 20 | 1 ~ 12 | 1 ~ 6 | 1 ~ 6 | 3 ~ 12 | 3 ~ 12 | 1 ~ 12 | 1 ~ 20 | 5 ~ 20 | 3 ~ 20 |
Work Material | General Steel[○] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] |
Flute Length (ℓ)(mm) | 20 ~ 50 | 2.5 ~ 45 | 0.4 ~ 32 | 4.5 ~ 48 | 0.3 ~ 9 | 1.5 ~ 26 | 5 ~ 38 | 3 ~ 60 | 2.5 ~ 38 | 6 ~ 38 | 12 ~ 30 | 1.5 ~ 18 | 3 ~ 38 | 5 ~ 40 | 4 ~ 56 | 5 ~ 75 | 3.5 ~ 30 | 1.5 ~ 24 | 5 ~ 40 | 4 ~ 56 | 5 ~ 75 | 3.5 ~ 30 | 0.5 ~ 12 | 0.75 ~ 30 | 0.2 ~ 40 | 0.6 ~ 60 | 1.75 ~ 42 | 4 ~ 48 | 2 ~ 12 | 2.5 ~ 40 | 3 ~ 60 | 3.5 ~ 56 | 3 ~ 21 | 0.4 ~ 24 | 0.6 ~ 36 | 2 ~ 40 | 4 ~ 48 | 1.5 ~ 10 | 1.5 ~ 13 | 4.5 ~ 18 | 10 ~ 30 | 2 ~ 24 | 2.5 ~ 45 | 10 ~ 38 | 15 ~ 45 |
Number of Flutes(sheet) | 2 | 2 | 2 | 4 | 2 | 3 | 4 | 4 | 2 | 4 | 4 | 3 | 3 | 3 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 4 | 2 | 2 | 2 | 4 | 4 | 4 | 3 | 4 ~ 6 | 4 ~ 6 | 4 ~ 6 | 4 ~ 6 | 4 | 3 ~ 4 |
Model | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long Neck Square | Long Neck Square | Highly-Helical | Highly-Helical | Highly-Helical | Highly-Helical | Roughing | Roughing |
Coating | Non-Coated | TiAlN | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | Non-Coated | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | TiAlN | TiAlN | TiAlN | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) |
Link Diameter (d)(mm) | 16 ~ 42 | 4 ~ 25 | 4 ~ 16 | 6 ~ 16 | 4 ~ 6 | 4 ~ 12 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 6 ~ 12 | 6 ~ 12 | 4 ~ 20 | 6 ~ 16 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 6 ~ 16 | 6 ~ 16 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 4 ~ 12 | 4 ~ 20 | 3 ~ 20 | 3 ~ 20 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 16 | 4 ~ 20 | 6 ~ 16 | 6 ~ 16 | 3 ~ 12 | 3 ~ 12 | 4 ~ 20 | 4 ~ 12 | 4 ~ 6 | 4 ~ 6 | 6 ~ 12 | 6 ~ 12 | 6 ~ 12 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 |
Overall Length (L)(mm) | 140 ~ 270 | 45 ~ 120 | 45 ~ 90 | 60 ~ 110 | 40 ~ 120 | 45 ~ 100 | 45 ~ 125 | 45 ~ 130 | 40 ~ 105 | 40 ~ 105 | 50 ~ 90 | 60 ~ 100 | 60 ~ 110 | 60 ~ 110 | 60 ~ 130 | 60 ~ 150 | 80 ~ 200 | 60 ~ 110 | 60 ~ 110 | 60 ~ 130 | 60 ~ 150 | 80 ~ 200 | 40 ~ 65 | 40 ~ 105 | 35 ~ 110 | 40 ~ 130 | 45 ~ 95 | 45 ~ 100 | 40 ~ 65 | 45 ~ 105 | 45 ~ 130 | 45 ~ 120 | 45 ~ 75 | 35 ~ 75 | 40 ~ 85 | 40 ~ 110 | 45 ~ 100 | 40 ~ 100 | 50 ~ 100 | 50 ~ 75 | 60 ~ 100 | 60 ~ 100 | 60 ~ 130 | 57 ~ 104 | 60 ~ 130 |
Length Under Neck (ℓ1)(mm) | 80 ~ 150 | - | - | - | - | - | - | - | - | - | - | 14 ~ 68 | 18 ~ 73 | 22 ~ 78 | 26 ~ 92 | 30 ~ 112 | 30 ~ 140 | 14 ~ 74 | 22 ~ 78 | 26 ~ 92 | 30 ~ 112 | 30 ~ 140 | - | - | 17 ~ 73 | 23 ~ 92 | 26 ~ 65 | 29 ~ 76 | - | 20 ~ 73 | 23 ~ 92 | 26 ~ 88 | - | 17 ~ 45 | 23 ~ 55 | 17 ~ 73 | 29 ~ 70 | 4 ~ 50 | 4 ~ 60 | - | - | 17 ~ 70 | 20 ~ 92 | 17 ~ 66 | 20 ~ 92 |
Processing Applications | Side Surface / Groove / Countersunk | Flat Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting |
Flute Shape | C Surface | Sharp Corner | Sharp Corner | With Lead | Sharp Corner | With Lead | With Lead | Sharp Corner / With Lead | Sharp Corner | Sharp Corner | Sharp Corner | With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | With Lead | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Ultra-Small R | Ultra-Small R |
Helix Angle (θ) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) / Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Weak Helix (15 to 25°) | Weak Helix (15 to 25°) |
Loading...
[4-75/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy