(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
3-Flute, Short Type for Copper / Aluminum Alloy CA-ETS
OSG
With a wide chip pocket, which has been designed considering the sharpness and chip discharge, it realizes high efficiency machining of grooves and side faces.
Days to Ship: | 8 Days or more |
---|
4-Flute, Short Type for Copper / Aluminum Alloy / Plastic CRN-EMS
OSG
CrN coating and sharp blade shape enables precision finish of copper and copper alloy.
Days to Ship: | 8 Days or more |
---|
4-Flute, Short (Strong Heavy-Cutting Model / Uneven Lead Type) NEO-PHS
OSG
Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.
Days to Ship: | 8 Days or more |
---|
Diamond End Mill, 1-Blade, Short Type MDOS
OSG
Diamond sintered body and brazed tip type end mill. It demonstrates strength in machining nonferrous alloys and graphite.
Days to Ship: | 8 Days or more |
---|
Deep Engraving Compatible Type Multifunction FXS-HPE
OSG
Since it has a long shank, it enables high-efficiency machining even when working on wall grooves, with no concern required for interference.
Days to Ship: | 8 Days or more |
---|
C-CES4000 UT Coat, 4-Flute Square
UNION TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiCN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
CPS for Resin Processing, 2-Flute Square
UNION TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
CPR for Resin Processing, 2-Flute Long Neck Square
UNION TOOL
•Model: Long Neck Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Coating: Non-Coated
•Number Of Flutes (sheet): 2
•Shank Taper Angle Bta (°): 11°
Days to Ship: | 8 Days or more |
---|
MX230 MUGEN-COATING 2-Flute LEAD 30 End Mill
NS TOOL
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 2
Days to Ship: | 8 Days or more |
---|
MHR430 MUGEN-COATING 4-Flute Long Neck End Mill (for Deep Ribbing)
NS TOOL
•Model: Long Neck Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiAlN
•Number Of Flutes (sheet): 4
Days to Ship: | 8 Days or more |
---|
SAGCα SA Coated Carbide α Nick
S&K
[Features]
· With a unique roughing blade shape, heavy machining and high speed machining are possible
Days to Ship: | 10 Days or more |
---|
Carbide End Mill for Rib KRE-2
KYOWASEIKO
Lineup of blade diameters from φ0.2 to φ6 in 0.1 increments. Longer neck section for deep machining.
Days to Ship: | 10 Days or more |
---|
XAL Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Torsion/Short Model
MISUMI
The new "standard" square end mill with 45° spiral is available at an ultra-low price [C-Value]
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Torsion/Short Model
MISUMI
The new "standard" square end mill with 45° spiral is available at an ultra-low price [C-Value]
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model
MISUMI
The Misumi's original fine intermediate blade length is available at a reasonable price[C-Value]
Days to Ship: | 8 Days or more |
---|
XAC Series Carbide Square End Mill, 2-Flute/Short Model
MISUMI
Standard TiAlN coat [C-Value] series
Days to Ship: | 8 Days or more |
---|
XAC Series Carbide Square End Mill, 4-Flute/Short Model
MISUMI
Standard TiAlN coat [C-Value] series
Days to Ship: | 8 Days or more |
---|
XAC Series Carbide Square End Mill, 4-Flute/Long Model
MISUMI
User friendly TiAlN coated series with long blade length [C-Value]
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Stub Model
MISUMI
The short blade length of the blade diameter x 1.5 is capable of high speed and high feed machining
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Short Model
MISUMI
Thrusting in the Z direction, lateral driving and waging can be performed by this single unit
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/SR Flute Length
MISUMI
Can be used on rough surfaces. Intermediate blade length between short and regular
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Regular Model
MISUMI
Single unit capable of thrusting in the Z direction, lateral driving and waging.
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Long Model
MISUMI
A long blade length that's capable of processing deep standing walls in a single shot
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Long Shank, Short Model
MISUMI
A long shank type that exhibits power in deep sections of a workpiece
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Stub Model
MISUMI
The blade length type of 1.5 times the outer diameter that's capable of high-speed high feed machining
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/SR Flute Length Model
MISUMI
Can be used on rough surfaces. Intermediate blade length between short and regular
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Regular Model
MISUMI
Choose the 4-blade type for durability in any processing, such as grooving and side milling
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Long Model
MISUMI
A long blade with rigid form that prevents chattering
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Long Shank, Short Model
MISUMI
Popular long shank type is available at a reasonable price
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill for Shrinkage Fitting, 2-Flute/1D Flute Length (Stub) Model
MISUMI
In addition to the stock items, the outer diameter can be specified in 0.01 mm increments through additional processing
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model
MISUMI
A short blade length (stub) series that's ideal for high-speed machining
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model
MISUMI
In addition to the stock items, the outer diameter can be specified in 0.01 mm increments through additional processing
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model
MISUMI
2-blade regular size that can be used in a wide range of applications
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/3.5D Flute Length Model
MISUMI
Lineups of fine intermediate blade length between regular and long are available only in MISUMI.
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model
MISUMI
Compatible with Deep Engraving.
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill for Shrinkage Fitting, 4-Flute/1D Flute Length (Stub) Model
MISUMI
Shrink-Fit Chuck Supported Type
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 4-Flute/2.5D Flute Length Model
MISUMI
The fine intermediate blade length between short and regular that's unique to Misumi
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model
MISUMI
A standard regular size with high versatility
Days to Ship: | Same day or more |
---|
Show Stock Products
TSC Series Carbide Square End Mill, 4-Flute/3.5D Flute Length Model
MISUMI
The fine intermediate blade length between regular and long that's unique to Misumi
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide End Mill for Key Grooves, 2-Flute/Short Model
MISUMI
The standard key grooving end mills that are sorted by tolerance have been significantly reduced in price
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model
MISUMI
Excellent in general versatility, it is a 2D blade length type that can be used in a wide range of applications
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model
MISUMI
The 3D blade length type that produces a high-quality finish compatible with a wide range of machining areas
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model
MISUMI
The 2D blade length type with high versatility achieves high-precision processing including grooving
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model
MISUMI
Achieves both high levels of machining precision and reduction of processing time in side milling
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Long Neck Square End Mill, 4-Flute/Long Neck Model
MISUMI
Classic 4-blade long neck is available in extensive sizes and low price
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Specifications |
Flute Diameter (D)(φ) |
Work Material |
Flute Length (ℓ)(mm) |
Number of Flutes(sheet) |
Model |
Coating |
Link Diameter (d)(mm) |
Overall Length (L)(mm) |
Length Under Neck (ℓ1)(mm) |
Processing Applications |
Flute Shape |
Helix Angle (θ) |
|
|
| |||||||||||||||||||||||||||||||||||||||||||
Brand | OSG | OSG | OSG | OSG | OSG | UNION TOOL | UNION TOOL | UNION TOOL | NS TOOL | NS TOOL | S&K | KYOWASEIKO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
Product Series | 4-Flute, Short Type for Copper / Aluminum Alloy / Plastic CRN-EMS | 4-Flute, Short (Strong Heavy-Cutting Model / Uneven Lead Type) NEO-PHS | MHR430 MUGEN-COATING 4-Flute Long Neck End Mill (for Deep Ribbing) | XAL Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Torsion/Short Model | XAL Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Torsion/Short Model | XAL Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model | TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Stub Model | TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Short Model | TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/SR Flute Length | TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Regular Model | TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Long Model | TSC Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Spiral/Long Shank, Short Model | TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Stub Model | TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/SR Flute Length Model | TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Regular Model | TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Long Model | TSC Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Spiral/Long Shank, Short Model | TSC Series Carbide Square End Mill for Shrinkage Fitting, 2-Flute/1D Flute Length (Stub) Model | TSC Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model | TSC Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model | TSC Series Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model | TSC Series Carbide Square End Mill, 2-Flute/3.5D Flute Length Model | TSC Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model | TSC Series Carbide Square End Mill for Shrinkage Fitting, 4-Flute/1D Flute Length (Stub) Model | TSC Series Carbide Square End Mill, 4-Flute/2.5D Flute Length Model | TSC Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model | TSC Series Carbide Square End Mill, 4-Flute/3.5D Flute Length Model | TSC Series Carbide End Mill for Key Grooves, 2-Flute/Short Model | Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model | Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model | Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model | Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model | TSC Series Carbide Long Neck Square End Mill, 4-Flute/Long Neck Model | ||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||
Flute Diameter (D)(φ) | 3 ~ 20 | 3 ~ 12 | 3 ~ 25 | 6 ~ 12 | 10 ~ 14 | 1 ~ 20 | 0.3 ~ 12 | 0.5 ~ 6 | 0.1 ~ 12 | 1 ~ 10 | 5 ~ 25 | 0.2 ~ 6 | 1 ~ 12 | 2 ~ 20 | 1 ~ 20 | 1 ~ 20 | 2 ~ 20 | 3 ~ 12 | 1 ~ 12 | 1 ~ 20 | 3 ~ 16 | 1 ~ 20 | 2 ~ 20 | 2 ~ 20 | 1 ~ 16 | 3 ~ 16 | 1 ~ 20 | 2 ~ 20 | 2 ~ 22 | 0.5 ~ 12 | 0.5 ~ 20 | 0.1 ~ 20 | 0.2 ~ 20 | 0.5 ~ 12 | 1 ~ 12 | 2 ~ 12 | 1 ~ 16 | 1 ~ 20 | 1 ~ 16 | 2 ~ 14 | 0.2 ~ 12 | 0.2 ~ 12 | 1 ~ 20 | 1 ~ 12 | 1 ~ 6 |
Work Material | Aluminum[◎] / Copper[◎] / Resin[○] | Aluminum[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | Aluminum[◎] / Graphite[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | Aluminum[○] / Copper[◎] / Resin[◎] | Aluminum[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[○] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
Flute Length (ℓ)(mm) | 8 ~ 38 | 8 ~ 26 | 6 ~ 50 | 7 ~ 13 | 15 ~ 21 | 2.5 ~ 48 | 0.9 ~ 36 | 1 ~ 12 | 0.2 ~ 24 | 1.5 ~ 15 | 15 ~ 60 | 0.3 ~ 9 | 1.5 ~ 26 | 5 ~ 38 | 3 ~ 60 | 2.5 ~ 38 | 6 ~ 38 | 12 ~ 30 | 1.5 ~ 18 | 3 ~ 38 | 5 ~ 40 | 4 ~ 56 | 5 ~ 75 | 3.5 ~ 30 | 1.5 ~ 24 | 5 ~ 40 | 4 ~ 56 | 5 ~ 75 | 3.5 ~ 30 | 0.5 ~ 12 | 0.75 ~ 30 | 0.2 ~ 40 | 0.6 ~ 60 | 1.75 ~ 42 | 4 ~ 48 | 2 ~ 12 | 2.5 ~ 40 | 3 ~ 60 | 3.5 ~ 56 | 3 ~ 21 | 0.4 ~ 24 | 0.6 ~ 36 | 2 ~ 40 | 4 ~ 48 | 1.5 ~ 10 |
Number of Flutes(sheet) | 3 | 4 | 4 | 1 | 4 | 4 | 2 | 2 | 2 | 4 | 4 | 2 | 3 | 4 | 4 | 2 | 4 | 4 | 3 | 3 | 3 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 4 | 2 | 2 | 2 | 4 | 4 | 4 |
Model | Square | Square | Square | Square | Square | Square | Square | Long Neck Square | Square | Long Neck Square | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long Neck Square |
Coating | Non-Coated | CrN | TiAlN | Non-Coated | TiAlN | TiCN | Non-Coated | Non-Coated | TiAlN | TiAlN | TiAlN | Non-Coated | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | TiAlN | TiAlN | TiAlN | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) |
Link Diameter (d)(mm) | 6 ~ 20 | 6 ~ 12 | 6 ~ 25 | 6 ~ 12 | 8 ~ 12 | 4 ~ 20 | 3 ~ 12 | 3 ~ 6 | 4 ~ 12 | 4 ~ 10 | 6 ~ 25 | 4 ~ 6 | 4 ~ 12 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 6 ~ 12 | 6 ~ 12 | 4 ~ 20 | 6 ~ 16 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 6 ~ 16 | 6 ~ 16 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 4 ~ 12 | 4 ~ 20 | 3 ~ 20 | 3 ~ 20 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 16 | 4 ~ 20 | 6 ~ 16 | 6 ~ 16 | 3 ~ 12 | 3 ~ 12 | 4 ~ 20 | 4 ~ 12 | 4 ~ 6 |
Overall Length (L)(mm) | 50 ~ 105 | 70 ~ 140 | 50 ~ 120 | 50 ~ 75 | 130 ~ 160 | 45 ~ 110 | 45 ~ 100 | 38 ~ 120 | 45 ~ 80 | 50 ~ 150 | 60 ~ 140 | 40 ~ 120 | 45 ~ 100 | 45 ~ 125 | 45 ~ 130 | 40 ~ 105 | 40 ~ 105 | 50 ~ 90 | 60 ~ 100 | 60 ~ 110 | 60 ~ 110 | 60 ~ 130 | 60 ~ 150 | 80 ~ 200 | 60 ~ 110 | 60 ~ 110 | 60 ~ 130 | 60 ~ 150 | 80 ~ 200 | 40 ~ 65 | 40 ~ 105 | 35 ~ 110 | 40 ~ 130 | 45 ~ 95 | 45 ~ 100 | 40 ~ 65 | 45 ~ 105 | 45 ~ 130 | 45 ~ 120 | 45 ~ 75 | 35 ~ 75 | 40 ~ 85 | 40 ~ 110 | 45 ~ 100 | 40 ~ 100 |
Length Under Neck (ℓ1)(mm) | - | - | - | 12 ~ 24 | - | - | - | 2 ~ 63 | - | 4 ~ 80 | 22 ~ 55 | - | - | - | - | - | - | - | 14 ~ 68 | 18 ~ 73 | 22 ~ 78 | 26 ~ 92 | 30 ~ 112 | 30 ~ 140 | 14 ~ 74 | 22 ~ 78 | 26 ~ 92 | 30 ~ 112 | 30 ~ 140 | - | - | 17 ~ 73 | 23 ~ 92 | 26 ~ 65 | 29 ~ 76 | - | 20 ~ 73 | 23 ~ 92 | 26 ~ 88 | - | 17 ~ 45 | 23 ~ 55 | 17 ~ 73 | 29 ~ 70 | 4 ~ 50 |
Processing Applications | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting | Inclined Cutting |
Flute Shape | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Corner / With Lead | With Lead | With Lead | C Surface | Sharp Corner | With Lead | With Lead | Sharp Corner / With Lead | Sharp Corner | Sharp Corner | Sharp Corner | With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead |
Helix Angle (θ) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Without Torsion | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) / Powerful Helix (45° to 60°) |
Loading...
[4-75/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy