(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Spiral Point Taps - High Speed Steel, TiN Coated, TIN-POT (TIN-POT-OH1-M2X0.4)

Spiral Point Taps - High Speed Steel, TiN Coated, TIN-POT TIN-POT-OH1-M2X0.4
  • Volume Discount

Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.

PDF

Part Number

Configured Part Number is shown.

TIN-POT-OH1-M2X0.4

 
Part Number
TIN-POT-OH1-M2X0.4
Part NumberMinimum order quantityVolume DiscountDays to Ship Nominal Pitch, Number of Threading
(mm)
L
(mm)
Accuracy Length under neck
(mm)
Shank diameter
(mm)
Number of Grooves Thread Length
(mm)
Tool No.
1 Piece(s)Available

8 Days or more

M20.440OH1-321210803

Loading...

  1. 1

Basic Information

Screw Types Meter Chamfer threads 5P Tool Material Type Vanadium high-speed steel
Work material Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / High Carbon Steel (C with a content over 0.45%) / Alloy Steel (SCM) / Stainless steel (SUS) / Tool Steel (Before SKD Hardening) / Steel casting (SC) / Ductile Cast Iron (FCD) / Copper (Cu) / Brass (Bs) / Brass cast iron (BsC) / Bronze (Pb) / Aluminum Rolled Material (AL) / Aluminum Alloy Casting (AC, ADC) / Magnesium Alloy (MC) / Zinc Alloy Casting (ZDC) / Titanium Alloy (Ti-6Al-4V, etc) / Thermoplastic plastic (vinyl chloride, nylon, etc.) Tap Type Point tap Hole type For through hole
Coating Y/N Available Coating Type TiN

Please check the type/dimensions/specifications of the part TIN-POT-OH1-M2X0.4 in the Spiral Point Taps - High Speed Steel, TiN Coated, TIN-POT series.

Products like this...

Part Number
TIN-POT-OH1-M1.4X0.3
TIN-POT-OH1-M1.7X0.35
TIN-POT-OH1-M2.3X0.4
TIN-POT-OH2-M2.5X0.45
TIN-POT-OH2-M2.6X0.45
TIN-POT-OH2-M3.5X0.6
Part NumberMinimum order quantityVolume DiscountDays to Ship Nominal Pitch, Number of Threading
(mm)
L
(mm)
Accuracy Length under neck
(mm)
Shank diameter
(mm)
Number of Grooves Thread Length
(mm)
Tool No.
1 Piece(s)Available

8 Days or more

M1.40.334OH1-32910800
1 Piece(s)Available

8 Days or more

M1.70.3536OH1-321110802
1 Piece(s)Available

8 Days or more

M2.30.442OH1-321310805
1 Piece(s)Available

8 Days or more

M2.50.4544OH2-321410807
1 Piece(s)Available

8 Days or more

M2.60.4544OH2-321410809
1 Piece(s)Available

8 Days or more

M3.50.648OH220431310812

Additional Products in this Category

Tech Support