(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.

All Categories

Categories

Applications

Brands

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products
Order/Quote

Part Number Checker

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.

    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Thread Mills - Carbide, Small Diameter, WH-VM-PNC, Planet Cutter Series

Thread Mills - Carbide, Small Diameter, WH-VM-PNC, Planet Cutter Series
  • Volume Discount

OSG

OSG

Planet cutter that can be used to make small female threaded M1 to M5 holes by milling. Ideal for preventing defects in workpieces with high added value and for tapping without pilot holes

PDF

Part Number

Configured Part Number is shown.

 
30
45
60
  1. 1
Part Number
WH-VM-PNC-0.72-0.25
WH-VM-PNC-0.91-0.25
WH-VM-PNC-1.05-0.3
WH-VM-PNC-1.2-0.35
WH-VM-PNC-1.3-0.35
WH-VM-PNC-1.5-0.4
WH-VM-PNC-1.9-0.45
WH-VM-PNC-2.4-0.5
WH-VM-PNC-3.1-0.7
WH-VM-PNC-4-0.8
WH-VM-PNC-UUNJ-3.2
Part NumberMinimum order quantityVolume DiscountDays to Ship Screw Types Pitch, Number of Threading
(mm) 		Work material Coating Type Outer Diameter
(mm) 		Blade Length
(mm) 		Length under neck
(mm) 		Shank diameter
(mm) 		Minimum Machining Diameter
(mm) 		Number of Screw Threads Coating Details Tool No.
1 Piece(s)Available

17 Days or more

Meter0.25Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Other0.720.252.753M11SS coating3900495
1 Piece(s)Available

17 Days or more

Meter0.25Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Other0.910.253.253M1.21SS coating3900496
1 Piece(s)Available

8 Days or more

Meter0.3Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Other1.050.33.83M1.41SS coating3900497
1 Piece(s)Available

8 Days or more

Meter0.35Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Other1.20.354.353M1.61SS coating3900498
1 Piece(s)Available

8 Days or more

Meter0.35Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Other1.30.354.853M1.7,M1.81SS coating3900499
1 Piece(s)Available

8 Days or more

Meter0.4Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]For High Hardness (Silicone Group)1.51.24.46M23WXL coated3900500
1 Piece(s)Available

8 Days or more

Meter0.45Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Other1.91.45.66M2.5, M2.63WXL coated3900501
1 Piece(s)Available

8 Days or more

Meter0.5Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Other2.41.56.56M33WXL coated3900502
1 Piece(s)Available

8 Days or more

Meter0.7Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Other3.12.18.76M43WXL coated3900503
1 Piece(s)Available

17 Days or more

Meter0.8Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Other42.410.86M53WXL coated3900504
1 Piece(s)Available

8 Days or more

Unified32Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Other3.22.49.16No.83WXL coated3900513

Loading...

  1. 1

Basic Information

Tool Material Type Carbide Tap Type Thread cutter Hole type For through hole / For blind hole
Coating Y/N Available L(mm) 40 Number of Grooves 3
Torsional Angle(°) 11

Configure

Clear All

11 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Screw Types

    • Meter
    • Unified

    Clear

  • Pitch, Number of Threading(mm)

    • 0.25
    • 0.3
    • 0.35
    • 0.4
    • 0.45
    • 0.5
    • 0.7
    • 0.8
    • 32

    Clear

  • Work material

    • Low-Carbon Steel (carbon alloy less than 0.25%)
    • Medium carbon steel (carbon content 0.25 to 0.45%)
    • High Carbon Steel (C with a content over 0.45%)
    • Alloy Steel (SCM)
    • Stainless steel (SUS)
    • Quenched and tempered steel (25 to 35 HRC)
    • Quenched and tempered steel (35 to 45 HRC)
    • Quenched and tempered steel (45 to 55 HRC)
    • High Hardness Steel (50-60 HRC)
    • Steel casting (SC)
    • Cast Iron (FC)
    • Ductile Cast Iron (FCD)
    • Brass cast iron (BsC)
    • Aluminum Rolled Material (AL)
    • Aluminum Alloy Casting (AC, ADC)
    • Magnesium Alloy (MC)
    • Zinc Alloy Casting (ZDC)
    • Titanium Alloy (Ti-6Al-4V, etc)
    • Nickel-based alloy (Inconel, etc.)
    • Thermosetting plastic (bakelite, phenol, etc.)
    • Thermoplastic plastic (vinyl chloride, nylon, etc.)

    Clear

  • Coating Type

    • For High Hardness (Silicone Group)
    • Other

    Clear

  • Outer Diameter(mm)

    • 0.72
    • 0.91
    • 1.05
    • 1.2
    • 1.3
    • 1.5
    • 1.9
    • 2.4
    • 3.1
    • 3.2
    • 4

    Clear

  • Blade Length(mm)

    • 0.25
    • 0.3
    • 0.35
    • 1.2
    • 1.4
    • 1.5
    • 2.1
    • 2.4

    Clear

  • Length under neck(mm)

    • 2.75
    • 3.25
    • 3.8
    • 4.35
    • 4.4
    • 4.85
    • 5.6
    • 6.5
    • 8.7
    • 9.1
    • 10.8

    Clear

  • Shank diameter(mm)

    • 3
    • 6

    Clear

  • Minimum Machining Diameter(mm)

    • No.8
    • M1
    • M1.2
    • M1.4
    • M1.6
    • M1.7,M1.8
    • M2
    • M2.5, M2.6
    • M3
    • M4
    • M5

    Clear

  • type

    • WH-VM-PNC(M)
    • WH-VM-PNC(U,UNJ)

    Clear

Days to Ship

    • All
    • 8 Days or Less
    • 17 Days or Less

    Clear

Specify Alterations

Additional Products in this Category

Tech Support

Technical Inquiry

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)

Contact Information
Contact Us

Inquiry Format

Go to Mobile site

Copyright © MISUMI Corporation All Rights Reserved.