(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Gimbaled Mirror Holder (F55-30)

Gimbaled Mirror Holder F55-30
  • Volume Discount

This is a holder where mirrors, plate beam splitter and such elements are fixed, and can adjust the tilting of two axis. The center when rotating with a fine movement and the center of the mirror is always the same.

[Features]
• F50, F55
· This is a holder where mirrors, plate beam splitter, lens and such elements are fixed, and can finely adjust the tilting (θy, θz).
· If both θy, θz clamp can be tightened, fine movement of ±4°-6° is possible, and if the clamp is loosened, a rough movement of 360​​° is possible.
· Because it is a gimbal mechanism, the center of rotation for fine movement and rough movement is always the same as the center of the mirror.
· Standard rod that is attached is φ20, L=60mm, but the rod length can be changed. Screw holes of the holder is M6P=1, and rods of A40 to A42 can be used.
· Mirror Holder F50: Feed method is the A type micro meter head and the E type screw type.
· Horizontal operation type mirror holder F55: Own horizontal operation (the operation system is mounted in the horizontal direction) so can be operated without putting a hand to the optical axis, and close specification is possible.
• F52
· This is a holder where mirrors, plate beam splitter, lens and such elements are fixed, and can finely adjust the tilting (θy, θz) of the two axis.
· 2 axis tilt (θy, θz). Fine adjustment of ±2° or ±3° (F52) is possible.
· Because it is a gimbal mechanism, the center of rotation for fine movement and rough movement is always the same as the center of the mirror.
· Removing the element such as mirror and such are with the screw ring system, and has a resin ring for protection attached.

PDF

Part Number

Configured Part Number is shown.

F55-30

 

F50-30

 

F50-50

 

F50-80

Part Number
F55-30
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSUsed Mirror Diameter
(φ)
Types Height of Holder
(mm)
Effective Diameter
(φ)
Fine Movement Method
1 Piece(s)Available

29 Days or more

1030-53.527Micrometer Head

Loading...

  1. 1
 

Basic Information

Adjustment axis θyθz axis

Please check the type/dimensions/specifications of the part F55-30 in the Gimbaled Mirror Holder series.

Products like this...

Part Number
F50-25.4E
F50-30E
F50-50A
F50-50E
F52-25.4
F55-50
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSUsed Mirror Diameter
(φ)
Types Height of Holder
(mm)
Effective Diameter
(φ)
Fine Movement Method
1 Piece(s)Available

13 Days or more

1025.4-5322Feed screw (P=0.5mm)
1 Piece(s)Available

13 Days or more

1030-5327Feed screw (P=0.5mm)
1 Piece(s)Available

13 Days or more

1050-6347Micrometer Head
1 Piece(s)Available

13 Days or more

1050-6347Feed screw (P=0.5mm)
1 Piece(s)Available

13 Days or more

1025.4-5022.5Micrometer Head
1 Piece(s)Available

13 Days or more

1050-63.547Micrometer Head

Additional Products in this Category

Tech Support