(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

XAL Coated Carbide Long Neck Square End Mill, 2-Flute/Long Neck Model

XAL Coated Carbide Long Neck Square End Mill, 2-Flute/Long Neck Model
  • New Products
  • Volume Discount

The long-awaited long-neck type joins the popular XAL Series (C-Value)

XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model:Related Image
Part Number
XAL-EM2LB0.2-1
XAL-EM2LB0.2-1.5
XAL-EM2LB0.3-1
XAL-EM2LB0.3-2
XAL-EM2LB0.3-3
XAL-EM2LB0.3-4
XAL-EM2LB0.3-5
XAL-EM2LB0.4-2
XAL-EM2LB0.4-3
XAL-EM2LB0.4-4
XAL-EM2LB0.4-5
XAL-EM2LB0.4-6
XAL-EM2LB0.5-2
XAL-EM2LB0.5-4
XAL-EM2LB0.5-4-6
XAL-EM2LB0.5-6
XAL-EM2LB0.5-8
XAL-EM2LB0.5-10
XAL-EM2LB0.5-12
XAL-EM2LB0.5-15
XAL-EM2LB0.6-2
XAL-EM2LB0.6-4
XAL-EM2LB0.6-6
XAL-EM2LB0.6-8
XAL-EM2LB0.6-10
XAL-EM2LB0.6-12
XAL-EM2LB0.6-15
XAL-EM2LB0.7-2
XAL-EM2LB0.7-4
XAL-EM2LB0.7-6
XAL-EM2LB0.7-8
XAL-EM2LB0.8-4
XAL-EM2LB0.8-6
XAL-EM2LB0.8-8
XAL-EM2LB0.8-10
XAL-EM2LB0.8-12
XAL-EM2LB0.9-6
XAL-EM2LB0.9-8
XAL-EM2LB1-4
XAL-EM2LB1-6
XAL-EM2LB1-6-6
XAL-EM2LB1-8
XAL-EM2LB1-10
XAL-EM2LB1-12
XAL-EM2LB1-14
XAL-EM2LB1-16
XAL-EM2LB1-20
XAL-EM2LB1-25
XAL-EM2LB1-30
XAL-EM2LB1.2-6
XAL-EM2LB1.2-8
XAL-EM2LB1.2-10
XAL-EM2LB1.2-12
XAL-EM2LB1.2-16
XAL-EM2LB1.5-6
XAL-EM2LB1.5-8
XAL-EM2LB1.5-10
XAL-EM2LB1.5-12
XAL-EM2LB1.5-14
XAL-EM2LB1.5-16
Part NumberMinimum order quantityVolume DiscountDays to Ship Outer Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Length Under Neck (ℓ1)
(mm)
Geometry Figure Under Neck Diameter d1
(mm)
Effective Length (mm) Depends on Work Inclination Angle 30'
(mm)
Effective Length (mm) Depends on Work Inclination Angle 1°
(mm)
Effective Length (mm) Depends on Work Inclination Angle 2°
(mm)
Effective Length (mm) Depends on Work Inclination Angle 3°
(mm)
Length Under Neck (θ)
1 Piece(s)Available

8 Days or more

0.20.34501With Lead10.181.051.11.221.3710°
1 Piece(s)Available

8 Days or more

0.20.34501.5With Lead10.181.571.651.832.0610°
1 Piece(s)Available

8 Days or more

0.30.454501With Lead10.281.051.11.221.3710°
1 Piece(s)Available

8 Days or more

0.30.454502With Lead10.282.092.22.442.7510°
1 Piece(s)Available

8 Days or more

0.30.454503With Lead10.283.143.33.664.1210°
1 Piece(s)Available

8 Days or more

0.30.454504With Lead10.284.194.44.885.4910°
1 Piece(s)Available

8 Days or more

0.30.454505With Lead10.285.245.496.16.8710°
1 Piece(s)Available

8 Days or more

0.40.64502With Lead10.372.092.22.442.7510°
1 Piece(s)Available

8 Days or more

0.40.64503With Lead10.373.143.33.664.1210°
1 Piece(s)Available

8 Days or more

0.40.64504With Lead10.374.194.44.885.4910°
1 Piece(s)Available

8 Days or more

0.40.64505With Lead10.375.245.496.16.8710°
1 Piece(s)Available

8 Days or more

0.40.64506With Lead10.376.286.597.328.2410°
1 Piece(s)Available

8 Days or more

0.50.74502With Lead10.462.092.22.442.7510°
1 Piece(s)Available

8 Days or more

0.50.74504With Lead10.464.194.44.885.4910°
1 Piece(s)Available

8 Days or more

0.50.76504With Lead10.464.134.264.564.9115°
1 Piece(s)Available

8 Days or more

0.50.74506With Lead10.466.286.597.328.2410°
1 Piece(s)Available

8 Days or more

0.50.74508With Lead10.468.388.799.7610.9810°
1 Piece(s)Available

8 Days or more

0.50.745010With Lead10.4610.4710.9912.2113.7310°
1 Piece(s)Available

8 Days or more

0.50.745012With Lead10.4612.5713.1914.6516.4810°
1 Piece(s)Available

8 Days or more

0.50.745015With Lead10.4615.7116.4818.3120.610°
1 Piece(s)Available

8 Days or more

0.60.94502With Lead10.562.092.22.442.7510°
1 Piece(s)Available

8 Days or more

0.60.94504With Lead10.564.194.44.885.4910°
1 Piece(s)Available

8 Days or more

0.60.94506With Lead10.566.286.597.328.2410°
1 Piece(s)Available

8 Days or more

0.60.94508With Lead10.568.388.799.7610.9810°
1 Piece(s)Available

8 Days or more

0.60.945010With Lead10.5610.4710.9912.2113.7310°
1 Piece(s)Available

8 Days or more

0.60.945012With Lead10.5612.5713.1914.6516.4810°
1 Piece(s)Available

8 Days or more

0.60.945015With Lead10.5615.7116.4818.3120.610°
1 Piece(s)Available

8 Days or more

0.71.054502With Lead10.662.092.22.442.7510°
1 Piece(s)Available

8 Days or more

0.71.054504With Lead10.664.194.44.885.4910°
1 Piece(s)Available

8 Days or more

0.71.054506With Lead10.666.286.597.328.2410°
1 Piece(s)Available

8 Days or more

0.71.054508With Lead10.668.388.799.7610.9810°
1 Piece(s)Available

8 Days or more

0.81.24504With Lead10.764.194.44.885.4910°
1 Piece(s)Available

8 Days or more

0.81.24506With Lead10.766.286.597.328.2410°
1 Piece(s)Available

8 Days or more

0.81.24508With Lead10.768.388.799.7610.9810°
1 Piece(s)Available

8 Days or more

0.81.245010With Lead10.7610.4710.9912.2113.7310°
1 Piece(s)Available

8 Days or more

0.81.245012With Lead10.7612.5713.1914.6516.4810°
1 Piece(s)Available

8 Days or more

0.91.354506With Lead10.856.286.597.328.2410°
1 Piece(s)Available

8 Days or more

0.91.354508With Lead10.858.388.799.7610.9810°
1 Piece(s)Available

8 Days or more

11.54504With Lead10.954.194.44.885.4910°
1 Piece(s)Available

8 Days or more

11.54506With Lead10.956.286.597.328.2410°
1 Piece(s)Available

8 Days or more

11.56506With Lead10.956.196.396.847.3615°
1 Piece(s)Available

8 Days or more

11.54508With Lead10.958.388.799.7610.9810°
1 Piece(s)Available

8 Days or more

11.545010With Lead10.9510.4710.9912.2113.7310°
1 Piece(s)Available

8 Days or more

11.545012With Lead10.9512.5713.1914.6516.4810°
1 Piece(s)Available

8 Days or more

11.545014With Lead10.9514.6615.3917.0919.2210°
1 Piece(s)Available

8 Days or more

11.545016With Lead10.9516.7517.5819.5321.9710°
1 Piece(s)Available

8 Days or more

11.547020With Lead10.9520.9421.9824.4127.4610°
1 Piece(s)Available

8 Days or more

11.547025With Lead10.9526.1827.4730.51Not Applicable 10°
1 Piece(s)Available

8 Days or more

11.547030With Lead10.9531.4132.9736.62Not Applicable 10°
1 Piece(s)Available

8 Days or more

1.21.84506With Lead11.156.286.597.328.2410°
1 Piece(s)Available

8 Days or more

1.21.84508With Lead11.158.388.799.7610.9810°
1 Piece(s)Available

8 Days or more

1.21.845010With Lead11.1510.4710.9912.2113.7310°
1 Piece(s)Available

8 Days or more

1.21.845012With Lead11.1512.5713.1914.6516.4810°
1 Piece(s)Available

8 Days or more

1.21.845016With Lead11.1516.7517.5819.5321.9710°
1 Piece(s)Available

8 Days or more

1.52.34506With Lead11.456.286.597.328.2410°
1 Piece(s)Available

8 Days or more

1.52.34508With Lead11.458.388.799.7610.9810°
1 Piece(s)Available

8 Days or more

1.52.345010With Lead11.4510.4710.9912.2113.7310°
1 Piece(s)Available

8 Days or more

1.52.345012With Lead11.4512.5713.1914.6516.4810°
1 Piece(s)Available

8 Days or more

1.52.345014With Lead11.4514.6615.3917.0919.2210°
1 Piece(s)Available

8 Days or more

1.52.345016With Lead11.4516.7517.5819.5321.9710°

Loading...

Specifications

XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model:Related Image

Model Number
XAL-PEM2LB (Sharp Edge) / XAL-EM2LB (Standard)
Flute Diameter
D
Length Under Neck
1
Shank Diameter
d
Shank Diameter
d
StandardSharp EdgeBlade Length
Under Neck Diameter
d1
Overall Length
L
Under Neck Angle
θ
Actual Effective Length Depends on Work Inclination AngleFigure
30'
0.10.3-4No Standards0.20.0855010°0.310.330.370.411
0.5No Standards0.520.550.610.69
1No Standards1.051.11.221.37
0.20.5-4No Standards0.30.185010°0.520.550.610.691
11.051.11.221.37
1.51.571.651.832.06
2No Standards2.092.22.442.75
2.5No Standards2.622.753.053.43
3No Standards3.143.33.664.12
3.5No Standards3.663.854.274.81
4No Standards4.194.44.885.49
0.31-40.450.285010°1.051.11.221.371
1.5No Standards1.571.651.832.06
22.092.22.442.75
2.5No Standards2.622.753.053.43
33.143.33.664.12
44.194.44.885.49
55.245.496.16.87
6No Standards6.286.597.328.24
9No Standards9.429.8910.9812.36
0.41-4No Standards0.60.375010°1.051.11.221.371
22.092.22.442.75
266No Standards15°2.062.132.282.45
3-410°3.143.33.664.12
44.194.44.885.49
55.245.496.16.87
66.286.597.328.24
7No Standards7.337.698.549.61
8No Standards8.388.799.7610.98
9No Standards9.429.8910.9812.36
10No Standards10.4710.9912.2113.73
12No Standards12.5713.1914.6516.48
[ ! ]For shank diameter (d) specifications listed in blue, specify a blade diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
XAL-PEM2LB (Sharp Edge) / XAL-EM2LB (Standard)
Flute Diameter
D
Length Under Neck
1
Shank Diameter
d
Shank Diameter
d
StandardSharp EdgeBlade Length
Under Neck Diameter
d1
Overall Length
L
Under Neck Angle
θ
Actual Effective Length Depends on Work Inclination AngleFigure
30'
0.51-4No Standards0.70.465010°1.051.11.221.371
22.092.22.442.75
3No Standards3.143.33.664.12
44.194.44.885.49
46615°4.134.264.564.91
5-4No Standards10°5.245.496.16.87
66.286.597.328.24
7No Standards7.337.698.549.61
88.388.799.7610.98
9No Standards9.429.8910.9812.36
1010.4710.9912.2113.73
1212.5713.1914.6516.48
1515.7116.4818.3120.6
0.62-40.90.565010°2.092.22.442.751
3No Standards3.143.33.664.12
44.194.44.885.49
466No Standards15°4.134.264.564.91
6-410°6.286.597.328.24
7No Standards7.337.698.549.61
88.388.799.7610.98
1010.4710.9912.2113.73
1212.5713.1914.6516.48
1515.7116.4818.3120.6
18No Standards7018.8519.7821.9724.71
0.72-41.050.665010°2.092.22.442.751
44.194.44.885.49
66.286.597.328.24
88.388.799.7610.98
10No Standards10.4710.9912.2113.73
0.84-41.20.765010°4.194.44.885.491
66.286.597.328.24
88.388.799.7610.98
1010.4710.9912.2113.73
1212.5713.1914.6516.48
14No Standards14.6615.3917.0919.22
16No Standards16.7517.5819.5321.97
20No Standards7020.9421.9824.4127.46
24No Standards25.1326.3829.29Without Interference
0.94-4No Standards1.350.855010°4.194.44.885.491
66.286.597.328.24
88.388.799.7610.98
10No Standards10.4710.9912.2113.73
15No Standards15.7116.4818.3120.6
13-4No Standards1.50.955010°3.143.33.664.121
44.194.44.885.49
5No Standards5.245.496.16.87
66.286.597.328.24
66615°6.196.396.847.36
7-4No Standards10°7.337.698.549.61
88.388.799.7610.98
9No Standards9.429.8910.9812.36
1010.4710.9912.2113.73
1212.5713.1914.6516.48
1414.6615.3917.0919.22
1616.7517.5819.5321.97
18No Standards7018.8519.7821.9724.71
2020.9421.9824.4127.46
22No Standards23.0424.1826.85Without Interference
2526.1827.4730.51Without Interference
3031.4132.9736.62Without Interference
[ ! ]For shank diameter (d) specifications listed in blue, specify a blade diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
XAL-PEM2LB (Sharp Edge) / XAL-EM2LB (Standard)
Flute Diameter
D
Length Under Neck
1
Shank Diameter
d
Shank Diameter
d
StandardSharp EdgeBlade Length
Under Neck Diameter
d1
Overall Length
L
Under Neck Angle
θ
Actual Effective Length Depends on Work Inclination AngleFigure
30'
1.26-41.81.155010°6.286.597.328.241
88.388.799.7610.98
1010.4710.9912.2113.73
1212.5713.1914.6516.48
1616.7517.5819.5321.97
1.46-4No Standards2.11.355010°6.286.597.328.241
8No Standards8.388.799.7610.98
10No Standards10.4710.9912.2113.73
12No Standards12.5713.1914.6516.48
14No Standards14.6615.3917.0919.22
16No Standards16.7517.5819.5321.97
1.54-4No Standards2.31.455010°4.194.44.885.491
66.286.597.328.24
88.388.799.7610.98
1010.4710.9912.2113.73
1212.5713.1914.6516.48
1414.6615.3917.0919.22
1616.7517.5819.5321.97
187018.8519.7821.9724.71
2020.9421.9824.41Without Interference
25No Standards26.1827.4730.51Without Interference
30No Standards31.4132.97Without InterferenceWithout Interference
35No Standards10036.6538.46Without InterferenceWithout Interference
40No Standards41.8843.96Without InterferenceWithout Interference
45No Standards47.1249.45Without InterferenceWithout Interference
1.66-4No Standards2.41.555010°6.286.597.328.241
8No Standards8.388.799.7610.98
10No Standards10.4710.9912.2113.73
12No Standards12.5713.1914.6516.48
14No Standards14.6615.3917.0919.22
16No Standards16.7517.5819.5321.97
18No Standards7018.8519.7821.97Without Interference
20No Standards20.9421.9824.41Without Interference
26No Standards27.2228.5731.73Without Interference
1.86-4No Standards2.71.755010°6.286.597.328.241
8No Standards8.388.799.7610.98
10No Standards10.4710.9912.2113.73
12No Standards12.5713.1914.6516.48
14No Standards14.6615.3917.0919.22
16No Standards16.7517.5819.53Without Interference
18No Standards7018.8519.7821.97Without Interference
20No Standards20.9421.9824.41Without Interference
25No Standards26.1827.4730.51Without Interference
26-431.955010°6.286.597.328.241
88.388.799.7610.98
1010.4710.9912.2113.73
106615°10.3110.6511.412.27
12-410°12.5713.1914.6516.48
1414.6615.3917.0919.22
1616.7517.5819.53Without Interference
187018.8519.7821.97Without Interference
2020.9421.9824.41Without Interference
2526.1827.47Without InterferenceWithout Interference
3031.4132.97Without InterferenceWithout Interference
35No Standards10036.6538.46Without InterferenceWithout Interference
40No Standards41.8843.96Without InterferenceWithout Interference
50No Standards52.3554.95Without InterferenceWithout Interference
60No Standards62.83Without InterferenceWithout InterferenceWithout Interference
[ ! ]For shank diameter (d) specifications listed in blue, specify a blade diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
XAL-PEM2LB (Sharp Edge) / XAL-EM2LB (Standard)
Flute Diameter
D
Length Under Neck
1
Shank Diameter
d
Shank Diameter
d
StandardSharp EdgeBlade Length
Under Neck Diameter
d1
Overall Length
L
Under Neck Angle
θ
Actual Effective Length Depends on Work Inclination AngleFigure
30'
2.58-43.82.45010°8.388.799.7610.981
10No Standards10.4710.9912.2113.73
1212.5713.1914.65Without Interference
14No Standards14.6615.3917.09Without Interference
1616.7517.5819.53Without Interference
18No Standards7018.8519.78Without InterferenceWithout Interference
2020.9421.98Without InterferenceWithout Interference
2526.1827.47Without InterferenceWithout Interference
3031.4132.97Without InterferenceWithout Interference
40No Standards10041.88Without InterferenceWithout InterferenceWithout Interference
50No Standards52.35Without InterferenceWithout InterferenceWithout Interference
38-64.52.95010°8.388.799.7610.981
10No Standards10.4710.9912.2113.73
1212.5713.1914.6516.48
14No Standards7014.6615.3917.0919.22
1616.7517.5819.5321.97
18No Standards18.8519.7821.9724.71
2020.9421.9824.4127.46
2526.1827.4730.51Without Interference
3031.4132.9736.62Without Interference
4010041.8843.96Without InterferenceWithout Interference
45No Standards47.1249.45Without InterferenceWithout Interference
50No Standards52.3554.95Without InterferenceWithout Interference
412-663.85010°12.5713.1914.6516.481
1616.7517.5819.53Without Interference
207020.9421.9824.41Without Interference
25No Standards26.1827.47Without InterferenceWithout Interference
3031.4132.97Without InterferenceWithout Interference
35No Standards10036.6538.46Without InterferenceWithout Interference
4041.8843.96Without InterferenceWithout Interference
45No Standards47.1249.45Without InterferenceWithout Interference
50No Standards52.3554.95Without InterferenceWithout Interference
516-67.54.87010°16.7517.58Without InterferenceWithout Interference1
20No Standards20.9421.98Without InterferenceWithout Interference
2526.1827.47Without InterferenceWithout Interference
30No Standards31.41Without InterferenceWithout InterferenceWithout Interference
3510036.65Without InterferenceWithout InterferenceWithout Interference
40No Standards41.88Without InterferenceWithout InterferenceWithout Interference
5052.35Without InterferenceWithout InterferenceWithout Interference
620-695.870-Without InterferenceWithout InterferenceWithout InterferenceWithout Interference2
30Without InterferenceWithout InterferenceWithout InterferenceWithout Interference
40100Without InterferenceWithout InterferenceWithout InterferenceWithout Interference
50Without InterferenceWithout InterferenceWithout InterferenceWithout Interference
60Without InterferenceWithout InterferenceWithout InterferenceWithout Interference
[ ! ]>For shank diameter (d) specifications listed in blue, specify a blade diameter (D), shank length (ℓ1) and shank diameter (d).

More Information


The ideal length under neck can be selected for workpiece machining in deep areas.
The XAL coating with excellent lubricity delivers stable wear-resistant performance, especially when milling mild steel, giving improved shape accuracy to the machined objects.
[ ! ]The XAL coating does not have conductive properties. It cannot be used with conduction model tool setters.

XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model:Related Image
[ ! ]The actual effective length is a guideline. Confirm the actual measurement if concerned about interference with the workpiece.

Basic Information

Work Material General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy / Resin Number of Flutes(sheet) 2 Model Long Neck Square
Coating For General Steel (AlCrN etc.) Processing Applications Flat Surface / Side Surface / Groove / Inclined Cutting Helix Angle (θ) Standard Helix (30 to 40°)
Additional Classification Stocked Product Tolerance of OD(mm) 0 ~ -0.02 ● Inventory Product □ Manufacturer Product

Additional Products in this Category

Complementary Products

Tech Support