(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Also available in a high-hardness steel machining version
Part Number
Configured Part Number is shown.
Part Number |
---|
SEC-HR-1 |
SEC-HR-1.5 |
SEC-HR-2 |
SEC-HR-2.5 |
SEC-HR-3 |
SEC-HR-3.5 |
SEC-HR-4 |
SEC-HR-4.5 |
SEC-HR-5 |
SEC-HR-5.5 |
SEC-HR-6 |
SEC-HR-6.5 |
SEC-HR-7 |
SEC-HR-7.5 |
SEC-HR-8 |
SEC-HR-8.5 |
SEC-HR-9 |
SEC-HR-9.5 |
SEC-HR-10 |
Loading...
Model Number | Chamfer Length T | Blade Length ℓ | Overall Length L | Shank Diameter d | Number of Flutes | |
Flute Diameter D | ||||||
SEC-HR (Non-coated) TSC-XHR (For high-hardness steel machining) | 1 | 0.3 | 12 | 50 | 1 | 4 |
1.5 | 0.4 | 16 | 50 | 1.5 | 4 | |
2 | 0.5 | 18 | 50 | 2 | 4 | |
2.5 | 0.5 | 20 | 50 | 2.5 | 4 | |
3 | 0.5 | 27 | 60 | 3 | 4 | |
3.5 | 0.5 | 27 | 60 | 3.5 | 4 | |
4 | 0.5 | 27 | 60 | 4 | 4 | |
4.5 | 0.5 | 30 | 70 | 4.5 | 6 | |
5 | 0.5 | 30 | 70 | 5 | 6 | |
5.5 | 0.8 | 30 | 80 | 5.5 | 6 | |
6 | 0.8 | 30 | 80 | 6 | 6 | |
6.5 | 0.8 | 35 | 80 | 7 | 6 | |
7 | 0.8 | 35 | 80 | 7 | 6 | |
7.5 | 0.8 | 35 | 80 | 8 | 6 | |
8 | 0.8 | 35 | 80 | 8 | 6 | |
8.5 | 1 | 40 | 90 | 9 | 6 | |
9 | 1 | 40 | 90 | 9 | 6 | |
9.5 | 1 | 40 | 90 | 10 | 6 | |
10 | 1 | 40 | 90 | 10 | 6 |
Shank type | End Mill Shank | Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Copper | Groove Shape | Straight |
---|---|---|---|---|---|
Base-Blade Availability | None | Tool Material Type | Carbide |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy