(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
The 3D blade length type that produces a high-quality finish compatible with a wide range of machining areas
Part Number
Configured Part Number is shown.
Part Number |
---|
SN-SEC-EM2R6-[23-42/1]-18 |
SN-SEC-EM2R8-[29-46/1]-24 |
SN-SEC-EM2R10-[35-50/1]-30 |
SN-SEC-EM2R12-[41-55/1]-36 |
SN-SEC-PEM2R6-[23-42/1]-18 |
SN-SEC-PEM2R8-[29-46/1]-24 |
SN-SEC-PEM2R10-[35-50/1]-30 |
SN-SEC-PEM2R12-[41-55/1]-36 |
SNR-SEC-EM2R6-[23-42/1]-[5-18/1] |
SNR-SEC-EM2R8-[29-46/1]-[5-24/1] |
SNR-SEC-EM2R10-[35-50/1]-[5-30/1] |
SNR-SEC-EM2R12-[41-55/1]-[5-36/1] |
SNR-SEC-PEM2R6-[23-42/1]-[5-18/1] |
SNR-SEC-PEM2R8-[29-46/1]-[5-24/1] |
SNR-SEC-PEM2R10-[35-50/1]-[5-30/1] |
SNR-SEC-PEM2R12-[41-55/1]-[5-36/1] |
Loading...
Model Number
SEC-EM2R (Standard) / SEC-PEM2R (Sharp Edge)
Outer Diameter D |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
0.2 | 0.6 | 40 | 3 | 1 | ● |
0.4 | 1.2 | 40 | 3 | 1 | ● |
0.5 | 1.5 | 40 | 3 | 1 | ● |
0.8 | 2.4 | 40 | 3 | 1 | ● |
1 | 3 | 45 | 4 | 1 | ● |
1.2 | 3.6 | 45 | 4 | 1 | ● |
1.5 | 4.5 | 45 | 4 | 1 | ● |
1.8 | 5.4 | 45 | 4 | 1 | ● |
1.91 ~ 1.99 | 6 | 45 | 4 | 1 | □ (Standard Only) |
2 | 6 | 45 | 4 | 1 | ● |
2.25 ~ 2.49 | 7.5 | 45 | 4 | 1 | □ (Standard Only) |
2.5 | 7.5 | 45 | 4 | 1 | ● |
2.81 ~ 2.99 | 9 | 45 | 6 | 1 | □ (Standard Only) |
3 | 9 | 45 | 6 | 1 | ● |
3.01 ~ 3.49 | 10.5 | 45 | 6 | 1 | □ (Standard Only) |
3.5 | 10.5 | 45 | 6 | 1 | ● |
3.51 ~ 3.99 | 12 | 50 | 6 | 1 | □ (Standard Only) |
4 | 12 | 50 | 6 | 1 | ● |
4.51 ~ 4.99 | 15 | 55 | 6 | 1 | □ (Standard Only) |
5 | 15 | 55 | 6 | 1 | ● |
5.51 ~ 5.99 | 18 | 60 | 6 | 1 | □ (Standard Only) |
6 | 18 | 60 | 6 | 2 | ● |
7.01 ~ 7.99 | 24 | 70 | 8 | 1 | □ (Standard Only) |
8 | 24 | 70 | 8 | 2 | ● |
9.01 ~ 9.99 | 30 | 80 | 10 | 1 | □ (Standard Only) |
10 | 30 | 80 | 10 | 2 | ● |
11.01 ~ 11.99 | 36 | 85 | 12 | 1 | □ (Standard Only) |
12 | 36 | 85 | 12 | 2 | ● |
[ ! ]Outer diameters of manufactured products are designated in 0.01 mm increments
For Cutting Conditions, Refer to >>Click here.
● A general-purpose 2-flute end mill for a wide range of applications.
● Delivers a finish with very good working surface roughness after machining.
Work Material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Square |
---|---|---|---|---|---|
Coating | Non-Coated | Helix Angle (θ) | Standard Helix (30 to 40°) | Tolerance of OD(mm) | 0 ~ -0.02 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy