(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
The price of the low-cost classic XAL Series has been further reduced. [C-Value]
Part Number
Configured Part Number is shown.
XAL-PEM2S7
Loading...
Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | Standards Y/N | ||
Outer Diameter D |
|||||||
Standard | Sharp Edge | ||||||
XAL-EM2S (Standard) XAL-PEM2S (Sharp Edge) |
0.1 | 0.2 | 40 | 3 | 1 | ● | No Standards |
0.2 | 0.4 | 40 | 3 | 1 | ● | ● | |
0.3 | 0.6 | 40 | 3 | 1 | ● | ● | |
0.4 | 0.8 | 40 | 3 | 1 | ● | ● | |
0.5 | 1 | 40 | 3 | 1 | ● | ● | |
0.6 | 1.2 | 40 | 3 | 1 | ● | No Standards | |
0.7 | 1.4 | 40 | 3 | 1 | ● | No Standards | |
0.8 | 1.6 | 40 | 3 | 1 | ● | ● | |
1 | 2 | 40 | 4 | 1 | ● | ● | |
1.2 | 2.4 | 40 | 4 | 1 | ● | ● | |
1.3 | 2.6 | 40 | 4 | 1 | ● | No Standards | |
1.5 | 3 | 40 | 4 | 1 | ● | ● | |
1.8 | 3.6 | 40 | 4 | 1 | No Standards | ● | |
2 | 4 | 40 | 4 | 1 | ● | ● | |
2.5 | 5 | 40 | 4 | 1 | No Standards | ● | |
3 | 6 | 45 | 6 | 1 | ● | ● | |
3.5 | 7 | 45 | 6 | 1 | No Standards | ● | |
4 | 8 | 45 | 6 | 1 | ● | ● | |
4.5 | 9 | 50 | 6 | 1 | No Standards | ● | |
5 | 10 | 45 | 6 | 1 | ● | ● | |
5.5 | 11 | 50 | 6 | 1 | No Standards | ● | |
6 | 12 | 45 | 6 | 2 | ● | ● | |
7 | 14 | 60 | 8 | 1 | ● | ● | |
8 | 16 | 55 | 8 | 2 | ● | ● | |
9 | 18 | 70 | 10 | 1 | ● | ● | |
10 | 20 | 65 | 10 | 2 | ● | ● | |
11 | 22 | 75 | 12 | 1 | No Standards | ● | |
12 | 24 | 75 | 12 | 2 | ● | ● | |
14 | 28 | 80 | 12 | 1 | ● | No Standards | |
16 | 32 | 105 | 16 | 2 | ● | ● | |
20 | 40 | 110 | 20 | 2 | ● | ● |
● Competitive pricing with significant price breaks on larger quantities.
● The XAL coating provides excellent lubrication and delivers stable wear-resistant performance.This is apparent especially when milling raw materials, giving improved shape accuracy to the machined objects.
● 2-flute end mill can be used in a wide variety of applications.
● The XAL coating is non-conductive. Cannot be used with conduction model tool setters.
Work Material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Square |
---|---|---|---|---|---|
Coating | For General Steel (AlCrN etc.) | Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting | Helix Angle (θ) | Standard Helix (30 to 40°) |
Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 | ● Inventory Product □ Manufacturer Product | ● |
Please check the type/dimensions/specifications of the part XAL-PEM2S7 in the XAL Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model series.
Part Number |
---|
XAL-EM2S0.3 |
XAL-EM2S0.4 |
XAL-EM2S0.5 |
XAL-EM2S0.6 |
XAL-PEM2S8 |
XAL-PEM2S9 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy