(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Dedicated Crimpers for Coaxial Connectors. (Part Numbers)

Dedicated Crimpers for Coaxial Connectors.

Click this image to zoom it.

Move the mouse over the image to zoom

  • Dedicated Crimpers for Coaxial Connectors.
  • Dedicated Crimpers for Coaxial Connectors.
  • Volume Discount

Die-Mounting Model Crimping Tool that Supports Various Coaxial Connectors


● Tool used when contact connection and cable fixing are crimp model

· Select a compatible tool upon checking the compatible tool chart shown below.
· Crimp after adjusting the crimp strength.
· There is no calibration for the die mounting model tool.
· In the case of separation model dies, the mounting screws are included with the dies.

Specifications

Dedicated Crimpers for Coaxial Connectors.:Related Image

■Separation Type Dies
Model NumberTypeWeight
(g)
SW-BNC-ADies55
HT-3363FMTool Body450
* Purchase the respective tool body and dies.

■Die Set Type
Model NumberWeight
(g)
CR-56-0908254.5
50-1113351
50-0203349
50-8281531.5
DL801F5-YB500
DL801G-YB500

More Information

Dedicated Crimpers for Coaxial Connectors.:Related Image

Dedicated Crimpers for Coaxial Connectors.:Related Image

Compatible Tool Chart
Model NumberCrimping ToolCable Crimping Part HEX SizeContact Crimping Part HEX Size
HT-3363FM + SW-BNC-ACR-56-090850-020350-111350-8281DL801F5-YBDL801G-YB
050-1391A      4.521.69
050-1391D     4.52 
050-1391N      5.411.69
050-1392A      5.411.69
050-1392N      5.411.69
051-7501      5.41 
050-1372      8.23 
050-1371      8.231.69
050-1393N      5.41 
050-1395N-3DV      5.41 
051-NE53B      5.41 
MF70P1-NR501     5.41 
MF70P1-NR509      4.52 
MF70P1-NS501     5.411.72
MF70P1-NS509      4.521.72
050-J605A      5.411.69
050-JZ27C      4.521.69
050-J605B-3DV      5.411.69
MF70J1-NS501     5.411.72
MF70J1-NS509      4.521.72
MF70J1-AS501     5.411.72
MF70J1-AS509      4.521.72
MF70J1-FS501     5.411.72
MF70J1-FS509      4.521.72
088-0040G    3.25Not Required: Solder Connection
089-FZ01A-NI    3.25
089-J503A-NI      5.41
MF78P1-NS501     5.41
MF78P1-NS509      3.25
MF78P1-NR5      3.25
088-1021G    3.25
089-K604A-NI    3.25
088-4021G    3.25
MF78J1-NS501     5.41
MF78J1-NS509      3.25
MF78J1-BR5      3.25
MF78J1-BS501     5.41
MF78J1-BS509      3.25
MF78J1-ES5      3.25
MF78J1-FS5      3.25
088-5021G    3.25
080-HZ39J      3.250.7
MF91P1-NS5      3.25Not Required:
Solder Connection
MF91P1-NR5      3.25
080-RG35A    3.25
MF91J1-NS5      3.25
MF91J1-NR5      3.25
MF91J1-BS5      3.25
080-0060BJ      3.85
MF73P1-NS5     5.411.72
MF73P1-NR5     5.41 
MF73J1-NS5      5.412.54
MF73J1-DS5      5.412.54
MF73J1-FS5      5.412.54

Die Size Chart
HEX Size List
(mm)0.71.071.691.722.543.253.53.854.525.416.488.23
(inch).028.042.067.068.100.128.137.152.178.213.255.324
SW-BNC-A         
CR-56-0908         
50-1113         
50-0203         
50-8281          
DL801F5-YB      
DL801G-YB       
Part Number
50-0203
50-1113
50-8281
CR-56-0908
DL801F5-YB
DL801G-YB
Part NumberMinimum order quantityVolume DiscountDays to Ship
1 Piece(s)Available

8 Days or more

1 Piece(s)Available

8 Days or more

1 Piece(s)Available

8 Days or more

1 Piece(s)Available

8 Days or more

1 Piece(s)Available

8 Days or more

1 Piece(s)Available

8 Days or more

Loading...

  1. 1

BNC Connector

BNC Connector Connection Method

Soldering Method

BNC Connector Connection Method

Cable End Treatment Dimensions (Soldered)

Cable End Treatment Symbol A B C
H-1 5.5 2.5 3.0
H-2 6.5 2.5 4.0
H-3 6.6 2.2 3.0
H-4 7.0 3.8 3.2
H-5 7.2 3.2 3.0
H-6 7.5 4.5 3.0
H-7 7.5 3.0 3.0
H-8 8.5 2.4 3.0
H-9 9.0 2.5 3.0
H-10 10.8 4.8 3.0
H-11 10.5 4.5 3.5
H-12 10.8 4.8 3.0
H-13 11.5 5.2 3.0
H-14 13.0 10.6 2.4
H-15 13.5 8.5 (Note 1) 5.0
H-16 15.0 10.0 (Note 2) 5.0
H-17 12.5 6.0 3.0
H-18 7.8 2.3 4.0
(Unit: mm)
(Note 1) Adjust by cutting the length of the shield to 5 mm.
(Note 2) Adjust by cutting the length of the shield to 6 mm.

Crimping Method 1

(For 050-JZ27C, please refer to crimping method 2)
Crimping Method 1

Cable End Treatment Dimensions (Crimped)

Cable End Treatment Symbol A B C
C-1 9.5 1.5 6.0
C-2 7.5 3.5 4.0
C-3 7.0 4.0 4.0
C-4 7.5 8.5 2.5
C-5 7.5 1.5 2.5

Crimping Method 2

For 050-JZ27C
Crimping Method 2

Basic Information

Applicable Type Coaxial Connector Applicable Type Coaxial Connector Product Classification Crimping Tool

Additional Products in this Category

Complementary Products

Tech Support