Connector assembly is performed in the following order.
(1) Pass the cable through the cord bushing and connector body, and then solder to the insulator unit contact.
(2) After soldering the wire to the connector, crimp the clamp brackets attached to the connector with the crimp tool (HR10A-TC-02) or pliers.
(3) Fit the insulator unit screw part into the connector body. (Use a wrench and tighten to the values shown in the table.) When tightening the connector body, loosen the D part first so that the solder connection part is not placed under stress.
(4) Tighten the fastening screw so that its tip touches one of the two bosses on the clamp bracket. Note that the fastening screw is fixed with tightening torque of 0.3 N⋅m (3 kgf⋅cm).
(5) Finally, cover the the cord bushing with the connector body.
(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
HR10 Series Circular Connector - One-Touch Lock, Relay Adapter (Part Numbers)
- Volume Discount
Manufactured by Hirose Electric. Connector With A Simple and Smart Design.
- For Signal
- Sensor
- Solder
- Nickel-Plated
- One-Touch Lock
● It connects to straight plugs.
● One touch attachment/detachment by simply holding the straight plug's outer ring and pulling.
· Relay adapters cannot be fitted with one another.
Part Number
Configured Part Number is shown.
HR10A-7J-4P73
Specifications
| Model | Number of Cores | Type | Weight g |
| HR10A-7J-4P73 | 4 | Male (Pin) | 5.8 |
| HR10A-7J-6P73 | 6 | 6.8 | |
| HR10A-10J-10P73 | 10 | 13.8 | |
| HR10A-10J-12P73 | 12 | 13.8 | |
| HR10A-7J-4S73 | 4 | Female (Socket) | 6.8 |
| HR10A-7J-6S73 | 6 | 6.9 | |
| HR10A-10J-10S73 | 10 | 13.8 | |
| HR10A-10J-12S73 | 12 | 13.9 |
More Information
Loading...
Characteristics
| Item | Contents |
|---|---|
| Rated Current | 2 A or lower |
| Rated Voltage | 14-core: 150 VAC / 200 VDC, Other: 100 VAC / 140 VDC |
| Peak Voltage | 300 VAC or less (500 VAC or less for 4-core) / 1 minute |
| Insulation Resistance | 1,000 MΩ or more / 100 VDC |
| Contact Resistance | 10 mΩ or less / 1 ADC |
| Compatible Wire Size | AWG26 or below Loose Wires or 0.15 mm2 or less Loose Wires |
* For applicable wire size, cable finished outer diameter should be within cable clamp inner diameter.
Material / Finish
| Item | Materials | Finish |
|---|---|---|
| Body Shell | Zinc Alloy | Satin Nickel Plated |
| Pin Contact | Brass | Silver Plating |
| Socket Contact | Phosphor Bronze | Silver Plating |
| Insulator | Polyamide Resin | Black |
Contact Arrangement Diagram
Connection Work Method (Relay type can be done by the same method.)
| Number of Cores | Wrench Spacing (mm) | D Dimension (mm) | Wrench Tightening Force |
|---|---|---|---|
| 4.6 | 7.5 | 10 | 1.5 N・m (15 kgf・cm) |
| 10.12 | 9.5 | 16 | 1.5 N・m (15 kgf・cm) |
Connector Insertion and Removal Method
Basic Information
| Connector shape | Round Model | Connector series initials | G / H / I | GHI | HR10 |
|---|---|---|---|---|---|
| Application | Cable-to-cable | Allowable Current(A) | 2 | Allowable Voltage(V) | 100 / 140 |
| Wire connection method | Solder | Connection direction | Straight | IP Rating | N/A |
| Detaching Method | One-touch | Peak Voltage DC | 140V | Peak Voltage AC | 100V |
Please check the type/dimensions/specifications of the part HR10A-7J-4P73 in the HR10 Series Circular Connector - One-Touch Lock, Relay Adapter series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| HR10A-10J-10S73 |
| HR10A-10J-12P73 |
| HR10A-10J-12S73 |
| HR10A-7J-4S73 |
| HR10A-7J-6P73 |
| HR10A-7J-6S73 |
Additional Products in this Category
- MS3101 Series Circular Connector - MIL-Spec, Relay Adapter
- CE05/JL04V Series Circular Connector - Waterproof, MIL-Spec, Flanged Panel Mount, Receptacle
- NCS Series Circular Connector - Conduit
- PRC05 Series Circular Connector - One-Touch Lock, Panel Mount
- 25AA Series Circular Connector - Power, Resin
- NT Series Circular Connector - Waterproof, Oilproof
- JL04V Series Circular Connector - TÜV
- XLR Series Small Circular Connector - Flanged Panel Mount
Complementary Products
-
CE01/NB01 Series Circular Connector - Waterproof, Bayonet, Crimp Terminals
MISUMI Days to Ship : 6 Days or more
-
MS Series Circular Connector - M12, Bayonet One-Touch Lock, Waterproof, Plug
MISUMI Days to Ship : 11 Days or more
-
MMS3101 Series Circular Connector - Waterproof, MIL-Spec, Relay Adapter
MISUMI Days to Ship : 8 Days or more
-
CE05/JL04V Series Circular Connector - Waterproof, MIL-Spec, Plug
MISUMI Days to Ship : 8 Days or more
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy