(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
NB01/CE01 Series Circular Connector - M12, Bayonet, Waterproof (NB0106A-24-10-P-DBSS)
- Volume Discount
Solder model and easily workable crimp models available for use without tools.
- UL
- JIS
- IP67
- Vibration-Resistant
- Solder
- Caulking
- Bayonet Lock
● Straight plugs capable of connecting with panel mount receptacles and relay adapters.
● The special spring structure allows the secure fitting to be easily confirmed by a half twist of the bayonet lock.
● It has a waterproof fitting structure class IP67, which makes it suitable for use in places exposed to water or oil.
· The crimp model (CE0106A) contact is sold separately.
· The cable outlet is not designed to hold the cable.
· Use in combination with a waterproof cable clamp.
· Straight plugs cannot be fitted with one another.
· CE01 series are DDK products sold with Misumi model numbers.
Part Number
Configured Part Number is shown.
NB0106A-24-10-P-DBSS
Specifications
| Wire Connection Type | Arrangement No. | Contact Shape | Cable Drawing Out Direction | Number of Cores | Shell Size | Contact Size |
| NB0106A Solder Connection CE0106A Crimp Connection | 18-1 | P Male (Pin) S Female (Socket) | DBSS (Straight) | 10 | 18 | #16 |
| 18-11 | 5 | 18 | #12 | |||
| 20-15 | 7 | 20 | #12 | |||
| 20-29 | 17 | 20 | #16 | |||
| 22-14 | 19 | 22 | #16 | |||
| 22-22 | 4 | 22 | #8 | |||
| 22-23 | 8 | 22 | #12 | |||
| 24-10 | 7 | 24 | #8 | |||
| 24-28 | 24 | 24 | #16 | |||
| 28-21 | 37 | 28 | #16 | |||
| CE0106A Crimp Connection | 18-19A | 19 | 18 | #20 | ||
| 20-30A | 30 | 20 | #20 | |||
| 24-52A | 52 | 24 | #20 | |||
| 28-73A | 73 | 28 | #20 |
More Information
| Part Number |
|---|
| NB0106A-24-10-P-DBSS |
Loading...
Protection Circuit Connection Structural Diagram
About Compatible Products
NB01 connectors, CE01 connectors, and JL05 connectors are compatible with each other.Combination Method
Material / Finish
| Item | Materials | Finish |
|---|---|---|
| Shell (Body) | Aluminum Alloy | Black Chromate Treatment |
| Insulator | Polyester Resin | UL94V-0, Gray |
| Contact | Copper Alloy | Silver Plating |
| O-ring | Nitrile Rubber | Black |
| Coupling Nut | Aluminum Alloy | Black Chromate Treatment |
| Earth Lug | Steel Alloy | Silver Plating |
| Rear Gasket for Flange | Chloroprene Rubber | Black |
Electrical and Mechanical Properties, Compatible Wires
| Item | Characteristics | |||||||
|---|---|---|---|---|---|---|---|---|
| Rated Current | Contact Size | #20 | #16 | #12 | #8 | |||
| Maximum Value per 1 Piece | 5 A | 13 A | 23 A | 46 A | ||||
| Rated Voltage | Rating Classification | AC (r.m.s) | DC | |||||
| INST | 200 | 250 | ||||||
| A | 500 | 700 | ||||||
| D | 900 | 1,250 | ||||||
| Peak Voltage | INST | 1,000 VAC (r.m.s) 1 minute | ||||||
| A | 2,000 VAC (r.m.s) 1 minute | |||||||
| D | 2,800 VAC (r.m.s) 1 minute | |||||||
| Insulation Resistance | 5,000 MΩ or more at 500 VDC | |||||||
| Contact Resistance | Contact Size | #20 | #16 | #12 | #8 | |||
| mΩ or less | 8 | 4 | 2 | 0.6 | ||||
| Operating Temperature Range | -55°C ~ +125°C | |||||||
| Waterproofing | IP67 Equivalent | |||||||
| Humidity | Relative Humidity 95% or less | |||||||
| Service Life | 500 Insertions and Removals | |||||||
| NB01 (Solder Type) Compatible Wires (Note 2) |
Contact Size | #16 | #12 | #8 | ||||
| Conductor Cross-sectional Area | 0.75 mm2 or less | 3.5 mm2 or less | 8 mm2 or less | |||||
| AWG Size | 18 or less | 12 or less | 8 or less | |||||
(Note 1) Rated voltage and voltage resistance are shown with rating classification symbols (INST, A; D). Refer as well to the table below.
Contact Arrangement Diagram
| Number of Contacts | 4 | 5 | 7 | 7 | 8 |
|---|---|---|---|---|---|
| Arrangement No. | 22-22 | 18-11 | 20-15 | 24-10 | 22-23 |
| Contact Size | #8 | #12 | #12 | #8 | #12 |
| Contact Arrangement (Note 1) (Note 2) |
 |
 |
 |
 |
 |
| Rating Classification | A | A | A | A | D (4), A (Others) |
| Number of Contacts | 10 | 17 | 19 | 19 | 24 |
|---|---|---|---|---|---|
| Arrangement No. | 18-1 | 20-29 | 18-19A | 22-14 | 24-28 |
| Contact Size | #16 | #16 | #20 | #16 | #16 |
| Contact Arrangement (Note 1) (Note 2) |
 |
 |
 |
 |
 |
| Rating Classification | A (3, 5, 6, 8), INST (Others) |
A | INST | A | INST |
| Number of Contacts | 30 | 37 | 52 | 73 |
| Arrangement No. | 20-30A | 28-21 | 24-52A | 28-73A |
| Contact Size | #20 | #16 | #20 | #20 |
| Contact Arrangement (Note 1) (Note 2) |
 |
 |
 |
 |
| Rating Classification | INST | A | INST | INST |
|---|
(Note 1) View from the male (pin) connector coupling surface.
(Note 2) The ○ in the arrangement table shows the earth terminals (for protection of terminal connections).
Panel Cut Size Drawing
| Compatible Shell Size |
φA ±0.5 |
φB +0.2 -0 |
C ±0.13 |
Mounting Screws (Reference) | Rear Mounting Panel Thickness Limit |
|
|---|---|---|---|---|---|---|
| Inch Screws | Metric Screws | |||||
| 18 | 30.2 | 3.3 | 26.97 | #4-40 | M3 | 3.0 or less |
| 20 | 34.9 | 3.3 | 29.36 | #4-40 | M3 | |
| 22 | 36.6 | 3.3 | 31.75 | #4-40 | M3 | |
| 24 | 39.7 | 4.3 | 34.92 | #6-32 | M4 | |
| 28 | 46.1 | 4.3 | 39.67 | #6-32 | M4 | |
Basic Information
| Connector shape | Round Model | Application | Cable-to-cable | Connection direction | Straight |
|---|---|---|---|---|---|
| IP Rating | Yes | Representative standards | UL | Other Standards (JIS) | ○ |
| Detaching Method | Others |
Specification/Dimensions
-
A/B/C
- CE01
-
Allowable Voltage(V)
-
MNO
- NB01
-
Applicable pin/contact
- Male (Plug)
- Female (Socket)
-
Number of cores
-
Allowable Current(A)
-
Wire connection method
- Solder
- Crimping
-
Shell Size
-
CAD
- 2D
Days to Ship
-
- All
- 8 Days or Less
- 16 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- MS3108 Series Circular Connector - M12, Angled, Waterproof, Plug
- NCS Series Circular Connector - Flanged Panel Mount
- PRC03 Straight Plug (One-touch Lock)
- PLT Series Circular Connector - Receptacle, Plug
- NWPC Series Circular Connector - Waterproof, Metal
- 25AA Series Circular Connector - Power, Resin
- NT Series Circular Connector - Waterproof, Oilproof
- THB399Y Series Circular Connector - Waterproof, Y-Splitter, Relay
Complementary Products
-
MS3102 Series Circular Connector - MIL-Spec, Flanged Panel Mount
MISUMI Days to Ship : Same day or more
-
NCS Series Circular Connector - Threaded, Metal
Nanaboshi Electric Manufacturing Days to Ship : Same day or more
-
NB01/CE01 Series Circular Connector - M12, Bayonet, Waterproof, Panel Mount, Receptacle
MISUMI Days to Ship : 6 Days or more
-
MS Series Circular Connector - Waterproof, MIL-Spec, Bayonet, Flanged Panel Mount
MISUMI Days to Ship : 16 Days or more
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy