(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 p.m. 11/23/2024 to 5:00 p.m. (CST) 11/24/2024. We apologize for the inconvenience.
Rectangular Connectors - MR, Plug
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
Manufactured by Honda Tsushin Kogyo, Ltd. High-density MR Male Connector.
- For Signal
- Connection between Boards
- PLC
- Solder
- Silver-Plated
Rated Current: 3 A or less
Rated Voltage: 300 VAC or less
Applicable Electric Wire Size: AWG22 or less, or 0.08 mm2 ~ 0.2 mm2
· Mating counterpart is an MR connector socket (female).
· It cannot be combined with products of other manufacturers.
· This product is not waterproof.
(i)Caution
- 【We highly recommend using Industrial Network Cables】
1.Customizable RJ45 Industrial Ethernet Cable Assembly
2.M12-RJ45 Industrial Network Cables
3.M12-M12 Industrial Network Cables
Part Number
Configured Part Number is shown.
Specifications
| Model | Number of Cores | Weight (g) |
| MR-8M | 8 | 3.2 |
| MR-16M | 16 | 5.2 |
| MR-20M | 20 | 5.8 |
| MR-25M | 25 | 7.0 |
| MR-34M | 34 | 8.6 |
| MR-50M | 50 | 12.0 |
More Information
| Part Number |
|---|
| MR-8M |
| MR-16M |
| MR-20M |
| MR-25M |
| MR-34M |
| MR-50M |
Loading...
Material / Finish
| Item | Materials | Finish |
|---|---|---|
| Insulator | Diallyl Phthalate Resin | Blue |
| Male Contact | Brass | Silver Plating |
| Female Contact | Phosphor Bronze | Silver Plating |
| Hood | ABS Resin | Gray |
| Spring-lock | Stainless Steel | - |
| Fixing Bracket | Zinc Die-cast | Zinc Uni-chrome Plated |
Connector x Hood Combination Table
| Hood Connector |
Straight | For Vertical and Horizontal Dual-use | Straight Relay | |
|---|---|---|---|---|
| MR- * L+ | MR- * LW+ | MR- * LK2+ | ||
| Male | ○ | ○ | ○ | |
| Female | ○ | ○ | ○ | |
Hood x Hood Combination Chart
| Hood | Straight | For Vertical and Horizontal Dual-use | Straight Relay | |
|---|---|---|---|---|
| MR- * L+ | MR- * LW+ | MR- * LK2+ | ||
| Straight | MR- * L+ | x | x | ○ |
| For Vertical and Horizontal Dual-use | MR- * LW+ | x | x | ○ |
| Straight Relay | MR- * LK2+ | ○ | ○ | x |
・Connectors can be coupled if they have the same core numbers and are a combination of male <--> female.
Contact Arrangement ◆Male (Pin)
* Female (socket) would have the right and left reversed. (View from the connector cable connection side.)
Compatible Wire
| AWG | mm2 | |
|---|---|---|
| Size | 28 ~ 24 | 0.08 ~ 0.2 |
(Please make sure that the finished OD of the cable is equal to or smaller than the cable clamp ID of the hood)
Electrical Properties
| Item | Characteristics | Conditions |
|---|---|---|
| Rated Current | 3 A or less | Allowable current of single contact after coupling |
| Rated Voltage | 300 VAC or less | Allowable voltage within operating temperature range |
| Contact Resistance | 5 mΩ or less | Measured at 1 ADC |
| Insulation Resistance | 1,000 MΩ or more | Measured at 500 VDC |
| Peak Voltage | 1,000 VAC | No insulation breakdown after 1 min of application |
| Operating Temperature Range | -40°C ~ +105°C | - |
Mechanical Properties
| Item | Characteristics | Conditions |
|---|---|---|
| Extraction Force Per Single Core | Insertion Force: 300 g or less, Extraction Force: 50 g or more | 0.6±0.01 measured with flat steel gauge |
| Vibration Resistance | No cracks or looseness after testing | Tested at 1.5 mm Amplitude, 10 Hz ~ 55 Hz Vibration Frequency, Acceleration Speed of 15 G |
| Impact Resistance | No abnormalities or cracks in any parts | Tested at Acceleration Speed of 50 G |
| Insertion and Removal Durability | Contact resistance is 10 mΩ /1 ADC | Measured after being inserted/extracted 1,000 times |
Environmental Properties
| Item | Characteristics | Conditions |
|---|---|---|
| Temperature Resistance | No abnormalities or cracks in any parts | Measured after being tested at -55°C ~ +85°C |
| Humidity Resistance | 1,000 MΩ Insulation Resistance / 500 VDC, Peak Voltage 1,000 VAC / min |
Measured at 90 ~ 95% Humidity, 96 H Duration and 40°C Temperature |
| Corrosion Resistance | With no significant corrosion and 10 mΩ / 1 ADC or less contact resistance | Measured after being tested in 5% salt water for 48 hours |
Basic Information
| Connector Shape | Square Type | Connector Series Initials | M / N / O | M/N/O | MR |
|---|---|---|---|---|---|
| Applicable pin/contact | Male (Plug) | Application | Board to Cable | Allowable Current(A) | 3 |
| Allowable Voltage(V) | AC300 | Connection direction | Straight | IP Rating | N/A |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Rectangular Connectors - Crimp Terminals, Board to Cable, Straight
- Rectangular Connectors - Pedestal for Relay, Single-Lever, Han, Waterproof
- Rectangular Connectors - D-Sub, EMI-Shielded, Resin Hood, General Purpose
- Rectangular Connectors - D-Sub, Plug to Socket Convertible
- Rectangular Connectors - IEEE1284 Half-Pitch, Plug, Panel-Mount Installation, Press-Fit
- Rectangular Connectors - Han, Straight, Single-Lever Hood, Waterproof
- Rectangular Connectors - Serial I/O, 125V, 2.00 mm Pitch, Relay Connection
- [Ilme Insert]CDD 10 A/250 V High Density Crimp Type
Complementary Products
-
Rectangular Connectors - Plug-to-Socket, MR Series
Honda Tsushin Kogyo Days to Ship : Same day or more
-
Rectangular Connectors - Plastic Housing, MR Series
Honda Tsushin Kogyo Days to Ship : Same day or more
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy