(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Rectangular Connectors - MIL, Plug, Straight, PCB Installation, Lever Model (Part Numbers)

Rectangular Connectors - MIL, Plug, Straight, PCB Installation, Lever Model

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount
  • Price Reduction

Manufactured by Hirose Electric. Standard Connector for PCB Mounting.

  • UL
  • MIL
  • For Signal
  • Solder
  • Gold Plated
  • Lever Lock

● A versatile board connector with board mounting hole pitch of 2.54 mm that allows mounting on commercially available universal boards and the like.
● The direction of the pin is vertical with respect to the board surface.
● Since it has a lock mechanism when coupling, it can securely fix the connectors.
● UL No. E52653


Rated Current: 1A
Rated Voltage: 200V AC


· Please note that 50, 60 and 64-core models are available in 2 models with different polarity slot positions.
· The contact will be the male (pin) model only.

Specifications

MIL Connector PCB Straight Male Connector (Lever Model):Related Image

ModelNumber of CoresWeight
(g)
HIF3-6PA-2.54DSA7163.9
HIF3BD-10PA-2.54DSA71104.4
HIF3BA-14PA-2.54DSA71145.0
HIF3BA-16PA-2.54DSA71165.3
HIF3BA-20PA-2.54DSA71206.1
HIF3BA-26PA-2.54DSA71266.9
HIF3BA-30PA-2.54DSA71307.5
HIF3BA-34PA-2.54DSA71348.0
HIF3BA-40PA-2.54DSA71409.2
HIF3BA-50PA-2.54DSA715010.4
HIF3BB-50PA-2.54DSA715010.6
HIF3BA-60PA-2.54DSA716012.0
HIF3BB-60PA-2.54DSA716012.2
HIF3BA-64PA-2.54DSA716413.0
HIF3BB-64PA-2.54DSA716413.0

More Information

MIL Connector PCB Straight Male Connector (Lever Model):Related Image

MIL Connector PCB Straight Male Connector (Lever Model):Related Image
Part Number
HIF3-6PA-2.54DSA71
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHS
1 Piece(s)Available

6 Days or more

10

Loading...

  1. 1

Connection Method for Pressure Welding Type MIL Socket Connector

The MIL standard socket connector is a small and highly versatile connector used for connecting various input/output signals, such as solenoid valves and programmable controllers in FA and SCSI and IDE in computers. The pressure welding type, which can connect cables easily, is especially popular and used widely. Although it is desirable to use dedicated tools specified by the manufacturer in terms of reliability of cable connection for the pressure welding type, most dedicated tools specified by the manufacturer usually cost about fifty to one hundred thousand yen. This kind of expense is out of the question when manufacturing a small prototype. Here we introduce a method for simple pressure welding, which can be useful when manufacturing prototypes or simple jigs. However, after processing, please thoroughly check the finish and connection before use.
(1) First of all, select the cable. Flat cables (photo 1) with wire spacing of 1.27 mm pitch can be used. Types of flat cables include the bridge type, which is nearly all gray wires except for red and green, the intermittent bonded gray type, in which the flat portion turns to loose wires partway through, and the twisted-pair flat type which is intermittent bonded and resistant to wire twisting noise; there are also flat cables with shields and color types using a variety of colors.
(2) Once you have selected the cable, cut it straight with scissors. (Picture 2) If it is cut curved or diagonally, the conductor may not reach the blade of the contact. Then apply the cut cable to the uneven portion of the holding plate. (Picture 3)
(3) Next, considering the cable draw-out direction, position the ▼ mark of the connector so that it matches the first wire (if it is gray type match with the red line, if it is color type match with the brown line) and apply the edge portion of the connector to the cable. Press down firmly with a finger so that the cable is not aslant. (Picture 4)
(4) After that you only need to clamp and weld with a vise or simple pressure welding tool. (Picture 5) However, please perform the welding gradually and slowly. Also, if there is a lock lever as in the relay connector and the tool cannot be applied to the operation side, please use a wood block etc. so that there is always uniform force applied to the whole connector. Note that relay connector welding cannot be performed with a simple pressure welding tool.
(5) When the welding is complete, pull the connector out from the tool. (Picture 6) The strain relief is installed from the back of the connector so that the contact portion does not disconnect if force is applied to the cable during use. (Picture 7) Finally, check the conduction and the finished appearance of the pressure welding. (Picture 8)

Table of Possible Connectors for Pressure Welding

As well as MIL socket connectors, the simple pressure welding tool in the photos can be used for the following products.
Product Name Model
D-sub Connector
(EMI Pressure Welding Type)
FD*-*PF05 (Male)
FD*-*P05 (Male)
FD*-*S05 (Female)
Centronics Connector
General-purpose Pressure Welding Spring-lock Type
57F-30***-20S (Male)
57F-40***-20S (Female)
Centronics Connector
(EMI Pressure Welding Type)
57FE-30***-20N-D8 (Male)
57FE-40***-20N-D8 (Female)
FCN Pressure Welded Connector FCN-367J***-AU-F (Female)
MIL Socket Connector
Female Pressure Welding Contact Connector (without Lock)
HIF3**-**D-2.54R (Female)
79**-B500FL-3448
* Cannot be used for 60 / 64 core type. The type with 2 guide keys also cannot be used
MIL Socket Connector
Female Pressure Welding Contact Connector (with Lock)
XG4M-****-U
Caution: The attachment to hold the connector in place is not sold separately. When high reliability is required for the connection between the connector and the electrical wire, use a dedicated tool handled by the connector manufacturer.

Basic Information

Connector Shape Square Type M/N/O MIL Applicable pin/contact Male (Plug)
Cores 6 Application Cable-to-board Allowable Current(A) 1
Allowable Voltage(V) 200 Wire connection method Solder Connection direction Straight
IP Rating N/A Representative standards UL Polarity Guide / Slot(Pcs.) Central 1
Polarity Keyway / Key Attachment Portion(Pcs.) N/A Other Standards (MIL) Detaching Method Other

Additional Products in this Category

Complementary Products

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.