(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Rectangular Connectors - MIL, Socket, Press-Fit, without Lock, 1.27 mm Pitch (Part Numbers)

Rectangular Connectors - MIL, Socket, Press-Fit, without Lock, 1.27 mm Pitch
  • Volume Discount

1.27 mm Pitch Flat Cable and Batch Crimp

  • UL
  • MIL
  • For Signal
  • Connection between Boards
  • Solenoid Valve
  • PLC
  • Pressure Welding
  • Gold Plated

● Lead-free solder for environmental considerations.
● A standard MIL connector compliant with MIL specifications (MIL-C-83503) and with UL acquisition.
● UL No. E68080
● UL No. E45587 (Strain Relief)


Rated CurrentRated VoltageConnection ResistanceInsulation ResistanceWithstand VoltageOperating Temperature
1AAC250VBelow 20 mΩ1000 MΩ or more1,000 VAC r.m.s / 1 min.-55°C – 105°C
  

· Compatible Wire Size: AWG28 or 0.08 mm2 Stranded 1.27 mm Pitch Flat Cables, Fusion Cable

Specifications

MIL Press-fit Female Connector (Without Lock):Related Image

ModelNumber of CoresWeight
g
7910-B500FL-3448102.00
7914-B500FL-3448142.59
7916-B500FL-3448162.88
7920-B500FL-3448203.48
7926-B500FL-3448264.36
7930-B500FL-3448304.96
7934-B500FL-3448345.54
7940-B500FL-3448406.43
7950-B500FL-3448507.89
7950-B700FL-3448507.91
7960-B500FL-3448609.39
7964-B500FL-3448649.99

More Information

MIL Press-fit Female Connector (Without Lock):Related Image

[ M ]Material / Finish
ItemMaterialsFinish
ContactCopper AlloyNickel Plating Gold Base Plating
BodyGlass Reinforced PolyesterUL94V-0, Gray
CoverGlass-filled Polyester
Strain ReliefPolyester
Part Number
7910-B500FL-3448
7914-B500FL-3448
7916-B500FL-3448
7920-B500FL-3448
7926-B500FL-3448
7930-B500FL-3448
7934-B500FL-3448
7940-B500FL-3448
7950-B500FL-3448
7960-B500FL-3448
Part NumberMinimum order quantityVolume DiscountDays to Ship Cores Polarity Keyway / Key Attachment Portion
(Pcs.)
1 Piece(s)Available

8 Days or more

10N/A
1 Piece(s)Available

6 Days or more

14Single Side 1
1 Piece(s)Available

8 Days or more

16Left and Right Each 1
1 Piece(s)Available

8 Days or more

20Left and Right Each 1
1 Piece(s)Available

8 Days or more

26Left and Right Each 1
1 Piece(s)Available

8 Days or more

30Left and Right Each 1
1 Piece(s)Available

8 Days or more

34Left and Right Each 1
1 Piece(s)Available

8 Days or more

40Left and Right Each 1
1 Piece(s)Available

8 Days or more

50Left and Right Each 1
1 Piece(s)Available

8 Days or more

60Left and Right Each 1

Loading...

  1. 1

Connection Method for Pressure Welding Type MIL Socket Connector

The MIL standard socket connector is a small and highly versatile connector used for connecting various input/output signals, such as solenoid valves and programmable controllers in FA and SCSI and IDE in computers. The pressure welding type, which can connect cables easily, is especially popular and used widely. Although it is desirable to use dedicated tools specified by the manufacturer in terms of reliability of cable connection for the pressure welding type, most dedicated tools specified by the manufacturer usually cost about fifty to one hundred thousand yen. This kind of expense is out of the question when manufacturing a small prototype. Here we introduce a method for simple pressure welding, which can be useful when manufacturing prototypes or simple jigs. However, after processing, please thoroughly check the finish and connection before use.
(1) First of all, select the cable. Flat cables (photo 1) with wire spacing of 1.27 mm pitch can be used. Types of flat cables include the bridge type, which is nearly all gray wires except for red and green, the intermittent bonded gray type, in which the flat portion turns to loose wires partway through, and the twisted-pair flat type which is intermittent bonded and resistant to wire twisting noise; there are also flat cables with shields and color types using a variety of colors.
(2) Once you have selected the cable, cut it straight with scissors. (Picture 2) If it is cut curved or diagonally, the conductor may not reach the blade of the contact. Then apply the cut cable to the uneven portion of the holding plate. (Picture 3)
(3) Next, considering the cable draw-out direction, position the ▼ mark of the connector so that it matches the first wire (if it is gray type match with the red line, if it is color type match with the brown line) and apply the edge portion of the connector to the cable. Press down firmly with a finger so that the cable is not aslant. (Picture 4)
(4) After that you only need to clamp and weld with a vise or simple pressure welding tool. (Picture 5) However, please perform the welding gradually and slowly. Also, if there is a lock lever as in the relay connector and the tool cannot be applied to the operation side, please use a wood block etc. so that there is always uniform force applied to the whole connector. Note that relay connector welding cannot be performed with a simple pressure welding tool.
(5) When the welding is complete, pull the connector out from the tool. (Picture 6) The strain relief is installed from the back of the connector so that the contact portion does not disconnect if force is applied to the cable during use. (Picture 7) Finally, check the conduction and the finished appearance of the pressure welding. (Picture 8)

Table of Possible Connectors for Pressure Welding

As well as MIL socket connectors, the simple pressure welding tool in the photos can be used for the following products.
Product Name Model
D-sub Connector
(EMI Pressure Welding Type)
FD*-*PF05 (Male)
FD*-*P05 (Male)
FD*-*S05 (Female)
Centronics Connector
General-purpose Pressure Welding Spring-lock Type
57F-30***-20S (Male)
57F-40***-20S (Female)
Centronics Connector
(EMI Pressure Welding Type)
57FE-30***-20N-D8 (Male)
57FE-40***-20N-D8 (Female)
FCN Pressure Welded Connector FCN-367J***-AU-F (Female)
MIL Socket Connector
Female Pressure Welding Contact Connector (without Lock)
HIF3**-**D-2.54R (Female)
79**-B500FL-3448
* Cannot be used for 60 / 64 core type. The type with 2 guide keys also cannot be used
MIL Socket Connector
Female Pressure Welding Contact Connector (with Lock)
XG4M-****-U
Caution: The attachment to hold the connector in place is not sold separately. When high reliability is required for the connection between the connector and the electrical wire, use a dedicated tool handled by the connector manufacturer.

Basic Information

Connector Shape Square Type Connector Series Initials M / N / O M/N/O MIL
Applicable pin/contact Female (Socket) Application Board to Cable Allowable Current(A) 1
Allowable Voltage(V) 250 Wire connection method Pressure Welding Connection direction Straight
IP Rating N/A Representative standards UL Polarity Guide / Slot(Pcs.) Central 1
Other Standards (MIL) Detaching Method Other

Additional Products in this Category

Complementary Products

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.