(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Rectangular Connectors - MIL, Socket, Press-Fit, without Lock, 1.27 mm Pitch (7960-B500FL-3448)
- Volume Discount
1.27 mm Pitch Flat Cable and Batch Crimp
- UL
- MIL
- For Signal
- Connection between Boards
- Solenoid Valve
- PLC
- Pressure Welding
- Gold Plated
● Lead-free solder for environmental considerations.
● A standard MIL connector compliant with MIL specifications (MIL-C-83503) and with UL acquisition.
● UL No. E68080
● UL No. E45587 (Strain Relief)
| Rated Current | Rated Voltage | Connection Resistance | Insulation Resistance | Withstand Voltage | Operating Temperature |
| 1A | AC250V | Below 20 mΩ | 1000 MΩ or more | 1,000 VAC r.m.s / 1 min. | -55°C – 105°C |
· Compatible Wire Size: AWG28 or 0.08 mm2 Stranded 1.27 mm Pitch Flat Cables, Fusion Cable
(i)Caution
- 【We highly recommend using Industrial Network Cables】
1.Customizable RJ45 Industrial Ethernet Cable Assembly
2.M12-RJ45 Industrial Network Cables
3.M12-M12 Industrial Network Cables
Part Number
Configured Part Number is shown.
7960-B500FL-3448
Specifications
| Model | Number of Cores | Weight g |
| 7910-B500FL-3448 | 10 | 2.00 |
| 7914-B500FL-3448 | 14 | 2.59 |
| 7916-B500FL-3448 | 16 | 2.88 |
| 7920-B500FL-3448 | 20 | 3.48 |
| 7926-B500FL-3448 | 26 | 4.36 |
| 7930-B500FL-3448 | 30 | 4.96 |
| 7934-B500FL-3448 | 34 | 5.54 |
| 7940-B500FL-3448 | 40 | 6.43 |
| 7950-B500FL-3448 | 50 | 7.89 |
| 7950-B700FL-3448 | 50 | 7.91 |
| 7960-B500FL-3448 | 60 | 9.39 |
| 7964-B500FL-3448 | 64 | 9.99 |
More Information
[ M ]Material / Finish
| Item | Materials | Finish |
| Contact | Copper Alloy | Nickel Plating Gold Base Plating |
| Body | Glass Reinforced Polyester | UL94V-0, Gray |
| Cover | Glass-filled Polyester | |
| Strain Relief | Polyester |
Loading...
Connection Method for Pressure Welding Type MIL Socket Connector
The MIL standard socket connector is a small and highly versatile connector used for connecting various input/output signals, such as solenoid valves and programmable controllers in FA and SCSI and IDE in computers. The pressure welding type, which can connect cables easily, is especially popular and used widely. Although it is desirable to use dedicated tools specified by the manufacturer in terms of reliability of cable connection for the pressure welding type, most dedicated tools specified by the manufacturer usually cost about fifty to one hundred thousand yen. This kind of expense is out of the question when manufacturing a small prototype. Here we introduce a method for simple pressure welding, which can be useful when manufacturing prototypes or simple jigs. However, after processing, please thoroughly check the finish and connection before use.
(1) First of all, select the cable. Flat cables (photo 1) with wire spacing of 1.27 mm pitch can be used. Types of flat cables include the bridge type, which is nearly all gray wires except for red and green, the intermittent bonded gray type, in which the flat portion turns to loose wires partway through, and the twisted-pair flat type which is intermittent bonded and resistant to wire twisting noise; there are also flat cables with shields and color types using a variety of colors.
(2) Once you have selected the cable, cut it straight with scissors. (Picture 2) If it is cut curved or diagonally, the conductor may not reach the blade of the contact. Then apply the cut cable to the uneven portion of the holding plate. (Picture 3)
(3) Next, considering the cable draw-out direction, position the ▼ mark of the connector so that it matches the first wire (if it is gray type match with the red line, if it is color type match with the brown line) and apply the edge portion of the connector to the cable. Press down firmly with a finger so that the cable is not aslant. (Picture 4)
(4) After that you only need to clamp and weld with a vise or simple pressure welding tool. (Picture 5) However, please perform the welding gradually and slowly. Also, if there is a lock lever as in the relay connector and the tool cannot be applied to the operation side, please use a wood block etc. so that there is always uniform force applied to the whole connector. Note that relay connector welding cannot be performed with a simple pressure welding tool.
(5) When the welding is complete, pull the connector out from the tool. (Picture 6) The strain relief is installed from the back of the connector so that the contact portion does not disconnect if force is applied to the cable during use. (Picture 7) Finally, check the conduction and the finished appearance of the pressure welding. (Picture 8)
Table of Possible Connectors for Pressure Welding
As well as MIL socket connectors, the simple pressure welding tool in the photos can be used for the following products.
| Product Name | Model |
|---|---|
| D-sub Connector (EMI Pressure Welding Type) |
FD*-*PF05 (Male) FD*-*P05 (Male) FD*-*S05 (Female) |
| Centronics Connector General-purpose Pressure Welding Spring-lock Type |
57F-30***-20S (Male) 57F-40***-20S (Female) |
| Centronics Connector (EMI Pressure Welding Type) |
57FE-30***-20N-D8 (Male) 57FE-40***-20N-D8 (Female) |
| FCN Pressure Welded Connector | FCN-367J***-AU-F (Female) |
| MIL Socket Connector Female Pressure Welding Contact Connector (without Lock) |
HIF3**-**D-2.54R (Female) 79**-B500FL-3448 * Cannot be used for 60 / 64 core type. The type with 2 guide keys also cannot be used |
| MIL Socket Connector Female Pressure Welding Contact Connector (with Lock) |
XG4M-****-U |
Caution: The attachment to hold the connector in place is not sold separately. When high reliability is required for the connection between the connector and the electrical wire, use a dedicated tool handled by the connector manufacturer.
Basic Information
| Connector Shape | Square Type | Connector Series Initials | M / N / O | M/N/O | MIL |
|---|---|---|---|---|---|
| Applicable pin/contact | Female (Socket) | Application | Board to Cable | Allowable Current(A) | 1 |
| Allowable Voltage(V) | 250 | Wire connection method | Pressure Welding | Connection direction | Straight |
| IP Rating | N/A | Representative standards | UL | Polarity Guide / Slot(Pcs.) | Central 1 |
| Other Standards (MIL) | ○ | Detaching Method | Otheｒ |
Please check the type/dimensions/specifications of the part 7960-B500FL-3448 in the Rectangular Connectors - MIL, Socket, Press-Fit, without Lock, 1.27 mm Pitch series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| 7910-B500FL-3448 |
| 7914-B500FL-3448 |
| 7916-B500FL-3448 |
| 7920-B500FL-3448 |
| 7926-B500FL-3448 |
| 7930-B500FL-3448 |
Additional Products in this Category
- Rectangular Connectors - D-Sub, Solder/Machine Contact, EMI-Shielded
- Rectangular Connectors - D-Sub, PCB Installation, Solder and Press Terminals
- Rectangular Connectors - MIL, Extension, Press-Fit
- Rectangular Connectors - MR, Socket
- Rectangular Connectors - MR, Straight, Hooded
- Rectangular Connectors - IEEE1284 Half-Pitch, EMI-Shielded, Plastic Hood
- Rectangular Connectors - Han, Straight, Dual-Lever Hood, Waterproof
- Rectangular Connectors - Side Lever, Double Lock Base, Hood, Size 4
Complementary Products
-
Rectangular Connectors - MIL, Plug, Straight, PCB Installation, Box Model
MISUMI Days to Ship : 6 Days or more
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy