(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Rectangular Connectors - D-Sub, Integrated Terminal Block, Screw and Press Terminals

Rectangular Connectors - D-Sub, Integrated Terminal Block, Screw and Press Terminals

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount

Phoenix Contact make. Hood with integrated screw model terminal that allows for repeated connecting with a single driver.

  • For Signal
  • PLC
  • EMI Countermeasure
  • RS422
  • RS232
  • Screw Type
  • Gold Plated
  • Screw Lock

●The screw model terminal block wire connection allows for the wire connections to be changed as many times as you like. Therefore, it is ideal for inspection jigs etc.
● The cable outlet can be angled either right or left depending on the mounting direction of the hood.


· For wire connection, confirm that the screws are securely tightened and mount the hood before use.
· #4-40 inch screws for fixing to mating component are installed as standard. Replace with the included M2.6 screws when using with M2.6 screws.

Specifications

Screw-lock/Press Contact D-sub Connector (with Integrated Terminal Block):Related Image

Model NumberNumber of CoresTypeWeight
g
SUBCON9M-SH9Male
(Pin)
45.4
SUBCON15M-SH1552.8
SUBCON25M-SH2570.4
SUBCON9F-SH9Female
(Socket)
44.9
SUBCON15F-SH1551.0
SUBCON25F-SH2569.0

More Information

Screw-lock/Press Contact D-sub Connector (with Integrated Terminal Block):Related Image

Screw-lock/Press Contact D-sub Connector (with Integrated Terminal Block):Related Image

Screw-lock/Press Contact D-sub Connector (with Integrated Terminal Block):Related Image

Specifications

ItemMaterials
Rated Voltage50 VAC / VDC or less
Rated CurrentAC / DC 0.1 or less
Compatible Cable Finished Outer DiameterØ10 mm or less
Connectable Core Wire SizeSingle Wire 0.14 ~ 1.5 mm2 / Stranded Wire 0.14 ~ 1.0 mm2 / AWG26 ~ 14
Screw Tightening Torque0.4 Nm (4 kgf.cm)
Operating Temperature Range-20°C ~ +75°C

Material / Finish
ItemMaterials
Finish
Connector InsulatorPETP ResinUL94V-0
PC BoardGlass Epoxy ResinUL94V-0
Terminal Block InsulatorPolyamide ResinUL94V-0
HoodABS ResinNickel-plated

Part Number
SUBCON9M-SH
SUBCON15M-SH
SUBCON25M-SH
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSApplicable pin/contact Cores
1 Piece(s)Available

8 Days or more

10Male (Plug)9
1 Piece(s)Available

8 Days or more

10Male (Plug)15
1 Piece(s)Available

8 Days or more

10Male (Plug)25

Loading...

  1. 1

Compatible Wire Size

Connector Type Compatible Wire Size
AWG Size Conductor Cross-Sectional Area (mm2)
Solder Connection Type Finer than 20 Less than 0.53
Pressure Weld Connection Type 1.27 mm Pitch 28 Flat Cable
High-density Solder Connection Type 22 ~ 28 0.08 ~ 0.32
Terminal Block Built in Type 14 ~ 26 2.0 ~ 1.5
High Current Type For 10A 16 ~ 12 0.3 ~ 1.25
For 20A 12 ~ 18 0.75 ~ 3.5
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.

Panel Size

Solder Connection / Pressure Weld Connection Type
● Dimension Table
Number of Cores A±0.15 B±0.2 C±0.2
High Current Type High-density type Others
- 15 9 24.99 20.6 12.0
3 26 15 33.32 28.8 12.0
5 44 25 47.04 42.6 12.0
8 62 37 63.50 59.0 12.0
- 78 50 61.11 56.6 15.2
Mounting holes for panel front and rear mounting are common.

Pressure Weld Connection Type

a. Dimensions when mounting the connector from panel front
● Dimension Table
Number of Cores A1 B1
9 24.99 22.00
15 33.32 30.30
25 47.04 44.00
37 63.05 60.50
b. Dimensions when mounting the connector from panel rear
● Dimension Table
Number of Cores A2 B2
9 24.99 20.20
15 33.32 28.60
25 47.04 42.50
37 63.05 59.20

Contact Arrangement Diagram

Shell Size Group E A B C D
Standard Type
High-density type

Basic Information

Connector Shape Square Type D/E/F Dsub Application Board to Cable
Allowable Current(A) 1 Allowable Voltage(V) 60 Wire connection method Screw-fastened
Connection direction Straight IP Rating N/A Detaching Method Others
Note Voltage DC 60V Note Voltage AC 60V

Additional Products in this Category

Complementary Products

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.