(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.

All Categories

Applications

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Need Help?

Order/Quote

Order

Order

/ Order
/ Order

Part Number Checker

Catalog Request

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.

Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

MS3106 Series Circular Connector - MIL-Spec, Plug (DMS3106B-16S-5-P-Y)

Click this image to zoom it.

Move the mouse over the image to zoom

Volume Discount
Price Reduction
Lead Time Reduction

MISUMI

Japan Airlines electronics industry (JAE), Dai Ichi electronics industry (DDK) models used. International standard MIL-DTL-5015 connector that can be used in a wide variety of applications such as signals and power supply.

MIL
Solder
Silver-Plated

● MIL-DTL-5015 compliant (MIL-C-5015) connector.
● The mating components of the straight plug are the relay adapter and panel mounting receptacle.

· The MMS series does not support key position changes.
· Other companies' MS connectors can be fitted, but dimensions and
characteristics may vary depending on the manufacturer. Check components
carefully before use.
· Please note that parts can be mated with the waterproof model MS connectors /
cable clamps, but this will invalidate their waterproofing.
· The back shell of MMS connectors with shell sizes 14S, 24 and 28
cannot be disassembled. In addition, the insulator material is rubber.

Part Number

Configured Part Number is shown.

DMS3106B-16S-5-P-Y

Product specification
Part Numbers
Example
Standard Specifications

Specifications

MS3106-Series Straight Plug:Related Image

Factory Code	Model Number	Shell	Arrangement	Contact Shape	Number of Cores	Model Number	Factory Code	Model Number	Shell	Arrangement	Contact Shape	Number of Cores	Model Number
Factory Code	Model Number	Shell	Arrangement	Contact Shape	Number of Cores	Male P	Factory Code	Model Number	Shell	Arrangement	Contact Shape	Number of Cores	Female S
D	MS3106A	10SL	3	P Male (Pin) S Female (Socket)	3		D	MS3106A	10SL	3	P Male (Pin) S Female (Socket)	3	D/MS3106A10SL-3S
D	MS3106A	10SL	4		2		D	MS3106A	10SL	4		2	D/MS3106A10SL-4S
M	MS3106B Straight Plug	12S	3		2	MMS3106B-12S-3-P	M	MS3106B Straight Plug	12S	3		2	MMS3106B-12S-3-S
N		12S	3		2	N/MS3106B12S-3P	N		12S	3		2	N/MS3106B12S-3S
D		14S	1		3	D/MS3106B14S-1P	D		14S	1		3	D/MS3106B14S-1S
M			2		4	MMS3106B-14S-2-P	M			2		4	MMS3106B-14S-2-S
N			2		4	N/MS3106B14S-2P	N			2		4	N/MS3106B14S-2S
D			5		5	D/MS3106B14S-5P	D			5		5	D/MS3106B14S-5S
M			6		6	MMS3106B-14S-6-P	M			6		6	MMS3106B-14S-6-S
N			6		6	N/MS3106B14S-6P	N			6		6	N/MS3106B14S-6S
M			7		3	MMS3106B-14S-7-P	M			7		3	MMS3106B-14S-7-S
N			7		3	N/MS3106B14S-7P	N			7		3	N/MS3106B14S-7S
D			9		2	D/MS3106B14S-9P	D			9		2	D/MS3106B14S-9S
M		16S	1		7	MMS3106B-16S-1-P	M		16S	1		7	MMS3106B-16S-1-S
N			1		7	N/MS3106B16S-1P	N			1		7	N/MS3106B16S-1S
D			5		3	D/MS3106B16S-5P	D			5		3	D/MS3106B16S-5S
D			8		5	D/MS3106B16S-8P	D			8		5	D/MS3106B16S-8S
M		16	10		3	MMS3106B-16-10-P	M		16	10		3	MMS3106B-16-10-S
N		16	10		3	N/MS3106B16-10P	N		16	10		3	N/MS3106B16-10S
M		18	1		10	MMS3106B-18-1-P	M		18	1		10	MMS3106B-18-1-S
N			1		10	N/MS3106B18-1P	N			1		10	N/MS3106B18-1S
D			4		4	D/MS3106B18-4P	D			4		4	D/MS3106B18-4S
D			5		3	D/MS3106B18-5P	D			5		3	D/MS3106B18-5S
D			8		8	D/MS3106B18-8P	D			8		8	D/MS3106B18-8S
M			10		4	MMS3106B-18-10-P	M			10		4	MMS3106B-18-10-S
D			10		4	D/MS3106B18-10P	D			10		4	D/MS3106B18-10S
M			11		5	MMS3106B-18-11-P	M			11		5	MMS3106B-18-11-S
N			11		5	N/MS3106B18-11P	N			11		5	N/MS3106B18-11S
D			12		6	D/MS3106B18-12P	D			12		6	D/MS3106B18-12S
D			19		10	D/MS3106B18-19P	D			19		10	D/MS3106B18-19S
D			20		5	D/MS3106B18-20P	D			20		5	D/MS3106B18-20S
D			21		3	D/MS3106B18-21P	D			21		3	D/MS3106B18-21S
D			22		3	D/MS3106B18-22P	D			22		3	D/MS3106B18-22S
D		20	2		1	D/MS3106B20-2P	D		20	2		1	D/MS3106B20-2S
M			4		4	MMS3106B-20-4-P	M			4		4	MMS3106B-20-4-S
N			4		4	N/MS3106B20-4P	N			4		4	N/MS3106B20-4S
D			7		8	D/MS3106B20-7P	D			7		8	D/MS3106B20-7S
M			15		7	MMS3106B-20-15-P	M			15		7	MMS3106B-20-15-S
N			15		7	N/MS3106B20-15P	N			15		7	N/MS3106B20-15S
M			16		9	MMS3106B-20-16-P	M			16		9	MMS3106B-20-16-S
N			16		9	N/MS3106B20-16P	N			16		9	N/MS3106B20-16S
D			17		6	D/MS3106B20-17P	D			17		6	D/MS3106B20-17S
D			18		9	D/MS3106B20-18P	D			18		9	D/MS3106B20-18S
D			22		6	D/MS3106B20-22P	D			22		6	D/MS3106B20-22S
D			23		2	D/MS3106B20-23P	D			23		2	D/MS3106B20-23S
M			27		14	MMS3106B-20-27-P	M			27		14	MMS3106B-20-27-S
N			27		14	N/MS3106B20-27P	N			27		14	N/MS3106B20-27S
M			29		17	MMS3106B-20-29-P	M			29		17	MMS3106B-20-29-S
N			29		17	N/MS3106B20-29P	N			29		17	N/MS3106B20-29S

Factory Code	Model Number	Shell	Arrangement	Contact Shape	Number of Cores	Model Number	Factory Code	Model Number	Shell	Arrangement	Contact Shape	Number of Cores	Model Number
Factory Code	Model Number	Shell	Arrangement	Contact Shape	Number of Cores	Male P	Factory Code	Model Number	Shell	Arrangement	Contact Shape	Number of Cores	Female S
M	MS3106B Straight Plug	22	2	P Male (Pin) S Female (Socket)	3	MMS3106B-22-2-P	M	MS3106B Straight Plug	22	2	P Male (Pin) S Female (Socket)	3	MMS3106B-22-2-S
N			2		3	N/MS3106B22-2P	N			2		3	N/MS3106B22-2S
D			10		4	D/MS3106B22-10P	D			10		4	D/MS3106B22-10S
M			14		19	MMS3106B-22-14-P	M			14		19	MMS3106B-22-14-S
N			14		19	N/MS3106B22-14P	N			14		19	N/MS3106B22-14S
D			19		14	D/MS3106B22-19P	D			19		14	D/MS3106B22-19S
M			22		4	MMS3106B-22-22-P	M			22		4	MMS3106B-22-22-S
N			22		4	N/MS3106B22-22P	N			22		4	N/MS3106B22-22S
M			23		8	MMS3106B-22-23-P	M			23		8	MMS3106B-22-23-S
N			23		8	N/MS3106B22-23P	N			23		8	N/MS3106B22-23S
D			28		7	D/MS3106B22-28P	D			28		7	D/MS3106B22-28S
D		24	2		7	D/MS3106B24-2P	D		24	2		7	D/MS3106B24-2S
D			5		16	D/MS3106B24-5P	D			5		16	D/MS3106B24-5S
M			7		16	MMS3106B-24-7-P	M			7		16	MMS3106B-24-7-S
N			7		16	N/MS3106B24-7P	N			7		16	N/MS3106B24-7S
M			10		7	MMS3106B-24-10-P	M			10		7	MMS3106B-24-10-S
N			10		7	N/MS3106B24-10P	N			10		7	N/MS3106B24-10S
M			11		9	MMS3106B-24-11-P	M			11		9	MMS3106B-24-11-S
N			11		9	N/MS3106B24-11P	N			11		9	N/MS3106B24-11S
M			20		11	MMS3106B-24-20-P	M			20		11	MMS3106B-24-20-S
N			20		11	N/MS3106B24-20P	N			20		11	N/MS3106B24-20S
D			22		4	D/MS3106B24-22P	D			22		4	D/MS3106B24-22S
M			28		24	MMS3106B-24-28-P	M			28		24	MMS3106B-24-28-S
N			28		24	N/MS3106B24-28P	N			28		24	N/MS3106B24-28S
M		28	6		3	MMS3106B-28-6-P	M		28	6		3	MMS3106B-28-6-S
N			6		3	N/MS3106B28-6P	N			6		3	N/MS3106B28-6S
D			10		7	D/MS3106B28-10P	D			10		7	D/MS3106B28-10S
M			11		22	MMS3106B-28-11-P	M			11		22	MMS3106B-28-11-S
N			11		22	N/MS3106B28-11P	N			11		22	N/MS3106B28-11S
M			12		26	MMS3106B-28-12-P	M			12		26	MMS3106B-28-12-S
N			12		26	N/MS3106B28-12P	N			12		26	N/MS3106B28-12S
D			15		35	D/MS3106B28-15P	D			15		35	D/MS3106B28-15S
D			16		20	D/MS3106B28-16P	D			16		20	D/MS3106B28-16S
M			20		14	MMS3106B-28-20-P	M			20		14	MMS3106B-28-20-S
N			20		14	N/MS3106B28-20P	N			20		14	N/MS3106B28-20S
M			21		37	MMS3106B-28-21-P	M			21		37	MMS3106B-28-21-S
N			21		37	N/MS3106B28-21P	N			21		37	N/MS3106B28-21S
D		32A	10		54	D/MS3106B32A-10P	D		32A	10		54	D/MS3106B32A-10S
D		32	1		5	D/MS3106B32-1P	D		32	1		5	D/MS3106B32-1S
D			2		5	D/MS3106B32-2P	D			2		5	D/MS3106B32-2S
D			5		2	D/MS3106B32-5P	D			5		2	D/MS3106B32-5S
N			7		35	N/MS3106B32-7P	N			7		35	N/MS3106B32-7S
D			8		30	D/MS3106B32-8P	D			8		30	D/MS3106B32-8S
D			9		14	D/MS3106B32-9P	D			9		14	D/MS3106B32-9S
D			17		4	D/MS3106B32-17P	D			17		4	D/MS3106B32-17S
D			414		52	D/MS3106B32-414P	D			414		52	D/MS3106B32-414S
D		36	3		6	D/MS3106B36-3P	D		36	3		6	D/MS3106B36-3S
D			4		3	D/MS3106B36-4P	D			4		3	D/MS3106B36-4S
M			5		4	MMS3106B-36-5-P	M			5		4	MMS3106B-36-5-S
N			5		4	N/MS3106B36-5P	N			5		4	N/MS3106B36-5S
D			9		31	D/MS3106B36-9P	D			9		31	D/MS3106B36-9S
M			10		48	MMS3106B-36-10-P	M			10		48	MMS3106B-36-10-S
N			10		48	N/MS3106B36-10P	N			10		48	N/MS3106B36-10S
D			73		73	D/MS3106B36-73P	D			73		73	D/MS3106B36-73S

More Information

Shell Size	Coupling Screw A Screw
Shell Size	Coupling Screw A Screw	Effective Screw Length J ± 0.3	Total Length L or less	Outer Diameter ØQ ± 0.8	Cable Clamp Mounting V Screws	Screw Length W or more
10SL	5 / 8-24UNEF-2B	13.49	34.9	22.22	5 / 8-24UNEF-2A	9.53
12S	3 / 4-20UNEF-2B	13.5	42.8	25.4	5 / 8-24UNEF-2A	9.5
14S	7 / 8-20UNEF-2B	13.5	42.8	28.6	3 / 4-20UNEF-2A	9.5
16S	1-20UNEF-2B	13.5	42.8	31.8	7 / 8-20UNEF-2A	9.5
16	1-20UNEF-2B	18.3	52.4	31.8	7 / 8-20UNEF-2A	9.5
18	1-1 / 8-18UNEF-2B	18.3	52.4	34.1	1-20UNEF-2A	9.5
20	1-1 / 4-18UNEF-2B	18.3	55.6	37.3	1-3 / 16-18UNEF-2A	9.5
22	1-3 / 8-18UNEF-2B	18.3	55.6	40.5	1-3 / 16-18UNEF-2A	9.5
24	1-1 / 2-18UNEF-2B	18.3	58.7	43.7	1-7 / 16-18UNEF-2A	9.5
28	1-3/4-18UNS-2B	18.3	58.7	50.0	1-7 / 16-18UNEF-2A	9.5
32,32A	2-18UNS-2B	18.3	61.9	56.4	1-3/4-18UNS-2A	11.1
36	2-1/4-16UN-2B	18.3	61.9	62.7	2-18UNS-2A	12.7

: 30; 45; 60

Part Number
DMS3106B-16S-5-P-Y

Part Number	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Applicable pin/contact	Number of cores	Allowable Current (A)	Allowable Voltage (V)	Shell Size	Key Position Change	Key Position (Angle) (°C)	Peak Voltage DC	Peak Voltage AC	Note Current
	1 Piece(s)	Available	16 Days or more	10	Male (Plug)	3	13	500 ～ 700	16S	Y	215	700V	500V	-

Example

MIL Standard Compliant MS Connector

Common Specifications

Applicable Wire Size and Contact Size

Appropriate wire coating stripping length is the dimension of the contact solder hole length (L size) plus about 1 ~ 3 mm. Please note that the L dimension and D dimension of the male connector (pin) and the female connector (socket) are the same. When selecting the cable, please check if the cable fits into the inner diameter of the cable clamp.

Contact				Compatible Electric Wire Size
Contact Size	Solder Hole Diameter φD (mm)	Pin Contact Contacting Part Diameter φA (mm)	L (mm)	AWG	Conductor Section Area mm²
#16	1.85	1.6	6.4	16 ~ 20	1.25 or less
#12	2.95	2.4	9.5	12 ~ 14	3.5 or less
#8	5.31	3.6	12.7	8 ~ 10	8 or less
#4	8.45	5.7	15.9	4 ~ 6	22 or less
#0	11.91	9.1	15.9	0 ~ 2	50 or less

Electrical Properties

Contact Resistance	Contact Size	Test Current DC	Voltage Drop	Couple the male and the female side of the connector the same way as in operating conditions, send test current, measure using the voltage drop method and fulfill the value on the left.
	#16	20 A	21 mV or lower
	#12	35 A	20 mV or lower
	#8	60 A	12 mV or lower
	#4	110 A	10 mV or lower
	#0	200 A	10 mV or lower

Mechanical Properties

	Test Category Symbol			VAC (r.m.s.)
Thermal Shock	Low Temperature			High Temperature			Carry out 5 consecutive cycles, with the low temperature and high temperature on the left as 1 cycle. The time exposed to low and high temperature must be 30 minutes or more.
	-55 +0℃ -5℃			+125 +3℃ -0℃
	(1) There should be no cracks or damage in the connector. (2) After completion, the voltage resistance test should be satisfied.
Humidity Resistance	The following voltage resistance should be satisfied.						Expose the coupled connectors and panel mount to temperature 71±2°C and relative humidity 95±3% for 14 days, and then, without drying, perform the voltage resistance test in the left table for 5 minutes.
	INST			300
	A			750
	D			1,350
	E			1,875
	B			2,775
	C			4,500
Corrosion	(1) There should be no exposed metal or corrosion damaging the coupling or detachment of the connector. (2) Measurement of Contact Resistance						Expose for 48 hours to salt spray with concentration 5% and temperature 35°C; after that, wash under running water and dry for 12 hours in an air-circulating chamber at temperature of 38±3°C; finally, perform contact resistance and voltage resistance tests.
	Contact Size		Test Current		Voltage Drop (or Less)
	#16		20 A		35 mV
	#12		35		30
	#8		60		25
	#4		110		20
	#0		200		20
	(3) The voltage resistance in the following table should be satisfied.
	Test Category Symbol	VAC (r.m.s.)		Category Symbol		VAC (r.m.s.)
	INST	400		E		2,500
	A	1,000		B		3,500
	D	1,800		C		6,000

Environmental Properties

Single Contact Insertion and Removal Force	Contact Size	Average	Maximum	Minimum	Insertion and removal force is measured using a randomly extracted male and female. The average force should be at or below the average values shown on the left, and 96% of all values should be at or below the maximum values and at or above the minimum values.
	#16	0.95 kg	1.36 kg	0.11 kg
	#12	1.59	2.27	0.23
	#8	3.18	4.54	0.34
	#4	4.76	6.8	0.45
	#0	6.35	9.07	0.91
Contact Retention Force	Contact Size	Axial Load (kg)	Contact Size	Axial Load (kg)	It should withstand axial load in both directions as shown on the left.
	#16	4.5	#4	9.1
	#12	6.8	#0	11.3
	#8	9.1
Vibration	(1) There should be no current cut-off of 10 μsec or more during the test. (2) After completion, the voltage resistance test should be satisfied. (3) There should be no disconnection of the coupling, cracks, damage or looseness in any part.				Connect the wired connector and the panel mount by the usual method, and perform a vibration test using MIL-STD-1344. During the test, pass 100 mA current through the connector, inspect interruption of the current by a suitable method, and perform a voltage resistance test and visual inspection.
Impact	(1) After completion, the requirements for contact resistance should be satisfied. (2) There should be no cracks, damage or looseness in any part.				Apply acceleration of 50 G at a 90° angle to each axis direction to the wired and coupled connector and panel mount.
Service Life	(1) The requirements for contact resistance should be satisfied. (2) There should be no electrical or mechanical abnormalities.				Remove the coupling nut of the connector and insert and remove it 600 times at a speed not exceeding 500 times per 1 hour.

Contact Arrangement Table (by number of cores) View from the male (pin) connector coupling surface.

Arrangement No.

The left side is the shell size of the entire connector. The right side is the arrangement number of the contact. Together these compose the Arrangement Number.
Arrangement No.

Core Number Composition

The right side is the size of 1 contact. The left side is the number of contacts.
Core Number Composition

When ordering parts, please determine the voltage, current, number of cores, size, etc. from the table below, depending on the working environment.

Arrangement No.		Contact Shape	Contact Composition			Rated Current (A) (Note 1)	Insulation Resistance MΩ (or higher)	Rated Voltage (Note 2) (Note 3)		Test Category Symbol (Note 4)
Shell Size	Arrangement Number	Contact Shape	Total Number of Cores	Core Number Composition	Contact Size	Rated Current (A) (Note 1)	Insulation Resistance MΩ (or higher)	VDC or less Text shows Contact No.	VAC (r.m.s.) or less Text shows Contact No. Parentheses show voltage resistance / VAC (rms)	Test Category Symbol (Note 4)
10SL	3	P Male (Pin) S Female (Socket)	3	3	#16	13	5,000	700	500 (2000)	A
10SL	4		2	2
12S	3		2	2
14S	1		3	3
	2		4	4				250	200 (1000)	INST
	5		5	5
	6		6	6
	7		3	3				700	500 (2000)	A
	9		2	2
16S	1		7	7
	5		3	3
	8		5	5
16	10		3	3	#12	23
18	1		10	10	#16	13		BCFG-700, Others-250	BCFG-500 (2000), Others-200 (1000)	A (BCFG) INST (Others)
	4		4	4	#16	13		1,250	900 (2800)	D
	5		3	2	#12	23
	5		3	1	#16	13
	8		8	1	#12	23		700	500 (2000)	A
	8		8	7	#16	13
	10		4	4	#12	23
	11		5	5	#12	23
	12		6	6	#16	13
	19		10	10
	20		5	5
	21		3	3	#12	23
	22		3	3	#16	13		1,250	900 (2800)	D
20	2		1	1	#0	150		ABHG-1250, CDEF-700	ABHG-900 (2800), CDEF-500 (2000)	D (ABHG) A (CDEF)
	4		4	4	#12	23		700	500 (2000)	A
	7		8	8	#16	13
	15		7	7	#12	23
	16		9	2	#12	23
	16		9	7	#16	13
	17		6	5	#12	23
	17		6	1	#16	13
	18		9	3	#12	23
	18		9	6	#16	13
	22		6	3	#8	46
	22		6	3	#16	13
	23		2	2	#8	46
	27		14	14	#16	13
	29		17	17	#16	13
22	2		3	3	#8	46		1,250	900 (2800)	D
	10		4	4	#16	13		1,750	1250 (3500)	E
	14		19	19				700	500 (2000)	A
	19		14	14
	22		4	4	#8	46
	23		8	8	#12	23		H-1250, Others-700	H-900 (2800), Others-500 (2000)	D (H) A (Others)
	28		7	7				700	500 (2000)	A
24	2		7	7				1,250	900 (2800)	D
	5		16	16	#16	13		700	500 (2000)	A
	7		16	2	#12	23
	7		16	14	#16	13
	10		7	7	#8	46
	11		9	3	#8	46
	11		9	6	#12	23
	20		11	2	#12	23		1,250	900 (2800)	D
	20		11	9	#16	13
	22		4	4	#8	46
	28		24	24	#16	13		250	200 (1000)	INST
28	6	P Male (Pin) S Female (Socket)	3	3	#4	80	5,000	1,250	900 (2800)	D
	10		7	2	#4	80		G-1250, Others-700	G-900 (2800), 2 #8 46 Others-500 (2000)	D (G) A (Others)
				2	#8	46
				3	#12	13
	11		22	4	#12	13		700	500 (2000)	A
	11		22	18	#16	13
	12		26	26
	15		35	35
	16		20	20
	20		14	10	#12	23
	20		14	4	#16	13
	21		37	37	#16	13
32	1		5	2	#0	150		A-1750, Others-1250	A-1250 (3500), Others-900 (2800)	(A) D (Others)
	1		5	3	#12	23		A-1750, Others-1250	A-1250 (3500), Others-900 (2800)	(A) D (Others)
	2		5	3	#4	80		1,750	1250 (3500)	E
	2		5	2	#16	13		1,750	1250 (3500)	E
	5		2	2	#0	150		1,250	900 (2800)	D
	7		35	7	#12	23		ABhj-250, Others-700	ABhj-200 (1000), Others-500 (2000)	INST (ABhj) A (Others)
	7		35	28	#16	13		ABhj-250, Others-700	ABhj-200 (1000), Others-500 (2000)	INST (ABhj) A (Others)
	8		30	6	#12	23		700	500 (2000)	A
	8		30	24	#16	13		700	500 (2000)	A
	9		14	2	#4	80		1,250	900 (2800)	D
	9		14	12	#16	13		1,250	900 (2800)	D
32 A	10		54	54	#16	13		700	500 (2000)	A
32	17		4	4	#4	80		1,250	900 (2800)	D
32	414		52	52	#16	13		700	500 (2000)	A
36	3		6	3	#0	150		1,250	900 (2800)	D
	3		6	3	#12	23		1,250	900 (2800)	D
	4		3	3	#0	150		A-1250, BC-700	A-900 (2800), BC-500 (2000)	D (A) A (BC)
	5		4	4	#0	150		700	500 (2000)	A
	9		31	1	#4	80
				2	#8	46
				14	#12	23
				14	#16	13
	10		48	48
	73		73	73
48	5		100	1	#8	46
				9	#12	23
				90	#16	13

Note 1: Rated current is the value for single contacts when incorporated in the connector. Please note that the rated current does not change according to the voltage.
Note 2: Rather than the size of the contact or shell, rated voltage changes by arrangement of contacts.
Note 3: In some items, rated voltage diverges by each contact even when within the same connector.
Note 4: Properties will vary depending on the test category.

About Change in Mis-insertion Prevention Key Position (Angle)

Straight Connector

Outline Drawing

Shell Size	Coupling Screw A Screw	Size (mm)
Shell Size	Coupling Screw A Screw	Cable Entry φB ±0.3	Effective Screw Length J ±0.3	Total Length L or less	Outer Diameter Q ±0.8	Conduit Screw V Screw	Screw Length W or more
10SL	5/8-24UNEF-2B	9.6	13.49	34.9	22.22	5/8-24UNEF-2A	9.53
12S	3/4-20UNEF-2B	9.6	13.5	42.8	25.4	5/8-24UNEF-2A	9.5
14S	7/8-20UNEF-2B	12.5	13.5	42.8	28.6	3/4-20UNEF-2A	9.5
16S	1-20UNEF-2B	15.6	13.5	42.8	31.8	7/8-20UNEF-2A	9.5
16	1-20UNEF-2B	15.6	18.3	52.4	31.8	7/8-20UNEF-2A	9.5
18	1-1/8-18UNEF-2B	20.2	18.3	52.4	34.1	1-20UNEF-2A	9.5
20	1-1/4-18UNEF-2B	23.0	18.3	55.6	37.3	1-3/16-18UNEF-2A	9.5
22	1-3/8-18UNEF-2B	23.2	18.3	55.6	40.5	1-3/16-18UNEF-2A	9.5
24	1-1/2-18UNEF-2B	29.5	18.3	58.7	43.7	1-7/16-18UNEF-2A	9.5
28	1-3/4-18UNS-2B	29.8	18.3	58.7	50.0	1-7/16-18UNEF-2A	9.5
32	2-18UNS-2B	37.5	18.3	61.9	56.4	1-3/4-18UNS-2A	11.1
36	2-1/4-16UN-2B	43.8	18.3	61.9	62.7	2-18UNS-2A	12.7
48	3-16UN-2B	69.1	18.3	65.1	81.8	3-16UN-2A	15.9

Angled Connector

Outline Drawing

Shell Size	Coupling Screw A Screw	Size (mm)
Shell Size	Coupling Screw A Screw	Cable Entry B ±0.3	Effective Screw Length J ±0.3	Total Length L or less	M ±0.8	Outer Diameter Q ±0.8	U ±0.8	Conduit Screw V Screw	Screw Length W or more
12S	3/4-20UNEF-2B	9.6	13.5	50.8	41.7	25.4	25.4	5/8-24UNEF-2A	9.5
14S	7/8-20UNEF-2B	12.5	13.5	54.0	43.3	28.6	27.0	3/4-20UNEF-2A	9.5
16S	1-20UNEF-2B	15.6	13.5	60.3	48.0	31.8	28.6	7/8-20UNEF-2A	9.5
16	1-20UNEF-2B	15.6	18.3	65.1	52.8	31.8	28.6	7/8-20UNEF-2A	9.5
18	1-1/8-18UNEF-2B	18.6	18.3	68.3	54.4	34.1	32.1	1-20UNEF-2A	9.5
20	1-1/4-18UNEF-2B	23.0	18.3	77.0	60.7	37.3	33.7	1-3/16-18UNEF-2A	9.5
22	1-3/8-18UNEF-2B	23.2	18.3	77.0	60.7	40.5	33.3	1-3/16-18UNEF-2A	9.5
24	1-1/2-18UNEF-2B	28.0	18.3	86.5	67.1	43.7	34.9	1-7/16-18UNEF-2A	9.5
28	1-3/4-18UNS-2B	28.2	18.3	86.5	67.1	50.0	38.5	1-7/16-18UNEF-2A	9.5
32, 32A	2-18UNS-2B	35.9	18.3	95.2	71.8	56.4	46.4	1-3/4-18UNS-2A	11.1
36	2-1/4-16UN-2B	42.2	18.3	100.0	73.4	62.7	51.2	2-18UNS-2A	12.7
48	3-16UN-2B	65.9	18.3	125.4	86.5	81.8	59.1	3-16UN-2A	15.9

Relay Connector

Outline Drawing

Shell Size	Coupling Screw A Screw	Size (mm)
Shell Size	Coupling Screw A Screw	Effective Screw Length B or More	Total Length L or less	Length to Flange M +0.4 -0	Outer Diameter N or Less	Conduit Screw V Screw	Screw Length W or more
12S	3/4-20UNEF-2A	9.5	42.88	14.3	26.97	5/8-24UNEF-2A	25.4
14S	7/8-20UNEF-2A	9.5	42.88	14.3	29.36	3/4-20UNEF-2A	27.0
16S	1-20UNEF-2A	9.5	42.88	14.3	31.75	7/8-20UNEF-2A	28.6
16	1-20UNEF-2A	15.9	52.37	19.0	31.75	7/8-20UNEF-2A	28.6
18	1-1/8-18UNEF-2A	15.9	52.37	19.0	34.14	1-20UNEF-2A	32.1
20	1-1/4-18UNEF-2A	15.9	55.58	19.0	37.31	1-3/16-18UNEF-2A	33.7
22	1-3/8-18UNEF-2A	15.9	55.58	19.0	40.49	1-3/16-18UNEF-2A	33.3
24	1-1/2-18UNEF-2A	15.9	58.72	19.0	43.66	1-7/16-18UNEF-2A	34.9
28	1-3/4-18UNS-2A	15.9	58.72	19.0	50.01	1-7/16-18UNEF-2A	38.5
32, 32A	2-18UNS-2A	15.9	61.93	19.0	56.36	1-3/4UNS-2A	46.4
36	2-1/4-16UN-2A	15.9	61.93	19.0	62.71	2-18UNS-2A	51.2
48	3-16UN-2A	15.9	65.07	15.9	81.76	3-16UN-2A	59.1

Panel Mount

Outline Drawing

Shell Size	A Screw	Size (mm)
Shell Size	A Screw	B or more	K or less	L or less	M +0.79 -0	φN +0 -4.78	R ±0.13	S ±0.79	φT +0.25 -0.13
10SL	5/8-24UNEF-2A	9.53	2.1	21.9	14.28	15.9	18.26	25.4	3.05
12S	3/4-20UNEF-2A	9.52	2.4	24.3	14.27	19.86	20.62	27.79	3.05
14S	7/8-20UNEF-2A	9.52	2.4	24.3	14.27	23.01	23.01	30.18	3.05
16S	1-20UNEF-2A	9.52	2.4	24.3	14.27	24.61	24.61	32.54	3.05
16	1-20UNEF-2A	15.88	2.4	29.1	19.05	24.61	24.61	32.54	3.05
18	1-1/8-18UNEF-2A	15.88	3.0	28.6	19.05	26.97	26.97	34.92	3.05
20	1-1/4-18UNEF-2A	15.88	3.0	29.4	19.05	29.36	29.36	38.10	3.05
22	1-3/8-18UNEF-2A	15.88	3.0	29.4	19.05	31.75	31.75	41.28	3.05
24	1-1/2-18UNEF-2A	15.88	3.0	33.4	20.62	34.92	34.92	44.45	3.73
28	1-3/4-18UNS-2A	15.88	3.0	33.4	20.62	39.67	39.67	50.80	3.73
32, 32A	2-18UNS-2A	15.88	4.3	33.4	22.22	44.45	44.45	57.15	4.39
36	2-1/4-16UN-2A	15.88	4.3	33.4	22.22	49.23	49.23	63.50	4.39
48	3-16UN-2A	15.88	4.3	34.2	22.22	66.68	66.68	82.55	4.39

Current Capacity of Entire Connector

Rated current value per 1 contact varies depending on the size of the contact, but the current capacity that can flow safely through the connector varies depending on the total number of cores. The calculation method for 14-core or less and 15-core or more is different, so they are described separately.

(1) For 14-core or less

The rated current value per 1 contact at the time of connector incorporation is multiplied by the number of cores and then multiplied by the reduction factor in the figure below. The result is the allowable current of the entire connector.

■ Current Reduction Factor Table by Number of Cores

Total Number of Cores	1	2	3	4	5	6	7	8	9	10	11	12	13	14
Reduction Factor (%)	1	0.943	0.886	0.829	0.771	0.714	0.657	0.6	0.543	0.486	0.429	0.371	0.314	0.257

Example 1: For connectors with all contacts of the same size
Rated Current Value per 1 Contact x Number of Cores x Reduction Factor = Allowable Current of Entire Connector
13 A x 2 cores x 0.943 = 24.518 A
(When Arrangement Number is 12S-3)
Therefore, 24.518 A can be used for the entire connector.

Example 2: For connectors with contacts of different sizes
(Contact A Rated Current x Contact A Number of Cores + Contact B Rated Current x Contact B Number of Cores) x Reduction Factor (for the total number of cores) = Allowable Current of Entire Connector
(23 A x 2 cores + 13 A x 7 cores) x 0.543 = 74.391 A
(When Arrangement Number is 20-16)
Therefore, 74.391 A can be used for the entire connector.

(2) 15-core or more

The rated current value per 1 contact is multiplied by the number of cores and 20% of that value is the allowable current of the entire connector.

Example 1: For connectors with all contacts of the same size
Rated Current Value x Number of Cores x 20% = Allowable Current of Entire Connector
13 A x 17 cores x 0.2 = 44.2 A
(When Arrangement Number is 20-29)
Therefore, 44.2 A can be used for the entire connector.

Example 2: For connectors with contacts of different sizes
(Contact A Rated Current x Contact A Number of Cores + Contact B Rated Current x Contact B Number of Cores) x 20% = Allowable Current of Entire Connector
(23 A x 4 cores + 13 A x 18 cores) x 0.2 = 65.2 A
(When Arrangement Number is 28-11)
Therefore, 65.2 A can be used for the entire connector.

Soldering Method

Basic Information

Connector shape	Round Model	Connector series initials	M / N / O	MNO	MS
Application	Cable-to-cable	Wire connection method	Solder	Connection direction	Straight
IP Rating	N/A	Other Standards (MIL)	○	Connector Model	Straight Type
Detaching Method	Others

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Allowable Voltage(V)
200

250

500

700

900

1250

1750
Clear
Applicable pin/contact
- Male (Plug)
- Female (Socket)
Clear
Number of cores
1

2

3

4

5

6

7

8

9

10

11

14

16

17

19

20

22

24

26

30

31

35

37

48

52

54

73
Clear
Allowable Current(A)
13

23

46

80

150
Clear
Shell Size
12S

14S

16

16S

18

20

22

24

28

32

32A

36
Clear
Key Position Change
- N/A
- W
- X
- Y
- Z
Clear
Key Position (Angle)(°C)
35

45

70

80

90

110

120

125

145

170

180

215

235

240

250

265

270

280

290

325
Clear
CAD
- 2D
Clear

Days to Ship

All

Same day

8 Days or Less

11 Days or Less

12 Days or Less

16 Days or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

MS3102 Series Circular Connector - MIL-Spec, Flanged Panel Mount
MISUMI Days to Ship : Same day or more
MS3101 Series Circular Connector - MIL-Spec, Relay Adapter
MISUMI Days to Ship : Same day or more
MMS3106 Series Circular Connector - Waterproof, MIL-Spec, Plug
MISUMI Days to Ship : 8 Days or more
MS3102 Series Circular Connector - Waterproof, MIL-Spec, Bayonet, Panel Mount Receptacle
MISUMI Days to Ship : 8 Days or more
D/MS A/B Series Circular Connector - MIL-DTL-5015 Spec
DDK Days to Ship : Same day or more

Tech Support

Technical Support: Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com; Mon. - Fri. 8 a.m. - 6 p.m.; Technical Inquiry

Top of the page

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)

Contact Information: Contact Us

Inquiry Format

All Categories

Categories

Applications

Brands

How can we improve?

MS3106 Series Circular Connector - MIL-Spec, Plug (DMS3106B-16S-5-P-Y)

Specifications

More Information

Example

Basic Information

Configure

Specification/Dimensions

Allowable Voltage(V)

Applicable pin/contact

Number of cores

Allowable Current(A)

Shell Size

Key Position Change

Key Position (Angle)(°C)

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Tech Support

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)