(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Misumi Original Multi-Functional Hood (Part Numbers)

Misumi Original Multi-Functional Hood

One-touch and jack-screw-model combined use is possible


● It can support a jack screw in addition to the standard one-touch lever (Jack screws corresponding to number of connector screws are included in package).
● Straight and angled models are available.
● Wiring is easy thanks to cables with diameter thinness 35% that of conventional cables.
● By taking advantage of the free alteration / custom number, customized connection changes and mark tube printing etc. can be performed.



· The jack screw model cannot be coupled with the panel-mount that is attached to the panels with screws.
· The cable supports a 30V rating.
· Sheath peeling length can be designated as alteration service only for those with terminals or mark tubes.

Wiring and Wire Color Page >>Click here
*HUC / HAUC / HBUC >>Click here
HUJ / HAUJ / HBUJ >>Click here
HU >>Click here
Component Page >>Click here

Specifications

Misumi Original Multi-Functional Hood:Related Image

Connector TypeShape Specification TypeOutline Image Drawing (Unit: mm)Cable TypeNumber of CoresSpecified Length (m)
SHPM
With EMI Countermeasure Plastic Hood
One-Touch Type at Shipping
Jack Screws
Included


SHPMJS
With EMI Countermeasure Plastic Hood
Jack Screw Type at Shipping
Parts for One-Touch Function
Included

Misumi Original
H
(Male)
Misumi Original Multi-Functional Hood:Related ImageMisumi Original Multi-Functional Hood:Related Image140.2
~

50
(Can be specified by 0.1m
increments)
20
26
36
50
68
HH
(Male / Male)
Misumi Original Multi-Functional Hood:Related Image14
20
26
36
50
68
HY
(Male / Y Terminal)
with Pin No.
Insertion Mark Tube
Misumi Original Multi-Functional Hood:Related Image14
20
26
36
50
68
HT
(Male / Loose Wires)
with Pin No.
Insertion Mark Tube
Misumi Original Multi-Functional Hood:Related Image14
20
26
36
50
68
HU
(Male / Fusion)
Misumi Original Connection
HUC
(Male / Fusion)
Staggered Connection
HUJ
(Male / Fusion)
Inline Connection
Misumi Original Multi-Functional Hood:Related Image141
~
50
(Can be specified by 0.1m
increments)
20
26
36
50
68


Misumi Original Multi-Functional Hood:Related Image

Connector TypeShape Specification TypeMating Surface and Wiring DirectionOutline Image Drawing
(Unit: mm)
Cable TypeNumber of
Cores
Specified Length (m)
SHPM
With EMI Countermeasure Plastic Hood
One-Touch Type at Shipping
Jack Screws
Included



SHPMJS
With EMI Countermeasure Plastic
Hood
Jack Screw Type at Shipping

Parts
for One-Touch Function Included
Misumi Original
HA
(Male)
Misumi Original Multi-Functional Hood:Related ImageMisumi Original Multi-Functional Hood:Related ImageMisumi Original Multi-Functional Hood:Related Image140.2
~
50
Can be specified by 0.1m
increments
20
26
HB
(Male)
Misumi Original Multi-Functional Hood:Related Image36
50
68
HAH
(Male / Male)
Misumi Original Multi-Functional Hood:Related ImageMisumi Original Multi-Functional Hood:Related Image14
20
26
HBH
(Male / Male)
Misumi Original Multi-Functional Hood:Related Image36
50
68
HAY
(Male / Y Terminal)
with Pin No.
Insertion Mark Tube



HBY
(Male / Y Terminal)
with Pin No.
Insertion Mark Tube
Misumi Original Multi-Functional Hood:Related ImageMisumi Original Multi-Functional Hood:Related Image14
20
26
Misumi Original Multi-Functional Hood:Related Image36
50
68
HAT
(Male / Loose Wires)
with Pin No.
Insertion Mark Tube



HBT
(Male / Loose Wires)
with Pin No.
Insertion Mark Tube
Misumi Original Multi-Functional Hood:Related ImageMisumi Original Multi-Functional Hood:Related Image14
20
26
Misumi Original Multi-Functional Hood:Related Image36
50
68
HAUC
(Male / Fusion)
Staggered Connection

HAUJ
(Male / Fusion)
Inline Connection

HBUC
(Male / Fusion)
Staggered Connection

HBUJ
(Male / Fusion)
Inline Connection
Misumi Original Multi-Functional Hood:Related ImageMisumi Original Multi-Functional Hood:Related Image141
~
50
(Can be specified by
0.1 m increments)
20
26
Misumi Original Multi-Functional Hood:Related Image36
50
68
(Note) Drawing shows view from the insertion side of the connector for the mating surface and wiring direction.

Specified Length (m)~ 0.91 ~ 44.1 ~ 50
Tolerance+20mm+50mm+ 3% of Specified Length
* The tolerance of the specified length is as described above.
Part Number
Part NumberMinimum order quantityVolume DiscountDays to Ship Connector shape Hood screw CN2 Number of cores Cable Wiring (CN1 connector) Connector 2 Details Specified Length
(m)
Remark Mark Tube

Loading...

  1. 1

Compatible Manufacturers and Series Names

Manufacturer Name Series Name
AMP CHAMP 50
Hirose Electric Co., Ltd. DXM (Note)
Japan Aviation Electronics Industry, Ltd. TX10
Honda Tsushin Kogyo Co., Ltd. NPC
DDK Ltd. DHA
Fujitsu Limited 240R Type
Yamaichi Electronics Co., Ltd. NCS/NCP

(Note) Please note that these are not compatible with the DX Series by Hirose Electric Co., Ltd.

Contact Arrangement Diagram


Connector x Hood Combination Table

EMI Countermeasure Plastic Hood One-touch Lock EMI Countermeasure Metal Hood One-touch Lock EMI Countermeasure Plastic Hood Screw Fastening General-purpose Plastic Hood Screw Fastening General-purpose Plastic Hood One-touch Lock
103** -3210-00 103** -A200-00 103** -52S0-00S 103** -52A0-008 103** -52F0-008
Male Pressure Welding Type Connector 101** -6000EL ○ (Except 68-core) ○ (Except 68-core) ○ (Except 68-core)
Female Solder Type Connector 101** -3000PE x x
Pressure Welding Type Panel Mount 102** -0200EL x x x x x

○ = Combination available x = Combination unavailable

・Connectors can be coupled if they have the same core numbers and are a combination of male <--> female.

Compatible Wire

Type AWG
Pressure Welding Type Male Connector AWG28 stranded wires or 0.08 mm2 stranded wires (Coating OD 0.70 mm or less) and navy fixed type cables can be used.
* Flat cables cannot be used. (Note)
Solder Type Male Connector AWG24 ~ 30 or 0.2 mm2 ~ 0.05 mm2 (Flat cables cannot be used.)* Pay attention to the finished OD of the cables.
Pressure Welding Type Panel Mount (Female) AWG28 or 0.08 mm2, 1.27 mm Pitch Flat Cables (Loose wires cannot be used.)*

Rating

Item Specification Conditions
Current 0.5 A or less Allowable current between coupled contacts
Voltage 150 VAC / 200 VDC or less Refers to the maximum DC or AC voltage (effective value) that can be continuously applied under the rated ambient temperature
Ambient Temperature -55°C ~ +85°C Refers to the temperature range that can be used continuously under maximum load conditions

Electrical Properties

Item Characteristics Conditions
Contact Resistance Initial value of 35 mΩ or less
For contact after mechanical testing or environmental testing increased resistance value must be 25 mΩ or less
Includes bulk resistance of contacts. 1.5 mA resistance measured current and 20 mV release voltage based on the voltage-drop testing method.
(Based on combination with half pitch connectors by Sumitomo 3M)
Insulation Resistance 500 MΩ or more Apply 500 VDC between the adjoining contacts and measure the resistance after 1 min.
Voltage Resistance No arc dielectric breakdown Apply 500 VAC between the adjoining contacts for 1 min.
Leakage current is 1 mA at the time of measurement.

Mechanical Properties

Item Characteristics Conditions
Contact Retention Force 1 kg or more
(Pressure welding type panel mount is 0.8 kg or more)
Measure the contact retention force when tension is applied at the speed of 5 mm / min between the connector body and the installed contact.
Insertion and Extraction Force Per Single Pole ・ Insertion Force: 150 g or less
/ Extraction Force: 40 g or more
The total insertion / removal force for plug / panel mount insertion / removal applied to a single pole is adopted as the single-pole insertion / removal force. (Based on combination with plugs by Sumitomo 3M) Insertion / Extraction speed is 5 mm / min.
Vibration Test 1) 1 μsec or less instantaneous disconnection
2) Meets electrical & mechanical properties
10 ~ 55 HZ, insertion & extraction for 1 min, 1.52 mm amplitude or 10 G in XYZ directions for 2 hours each
Impact Test 1) 1 μsec or less instantaneous disconnection
2) Meets electrical & mechanical properties
50 G, 11 msec XYZ directions, 3 times each (18 times total)
MIL-STD-202E201A
Solvent Resistance 1) Indication is clear
2) Meets the electrical & mechanical properties
3 min of ultrasonic cleaning in Freon 1-1-1 Trichloroethane solvent
MIL-STD-202E213B
Durability 1) Meets the electrical & mechanical properties
However, initial values at insertion and extraction must be ±20%
50 times of insertion and extraction (Speed at 360 ~ 600 times / hr.)
MIL-STD-202E215

Environmental Resistance Properties

Item Test Conditions Standards Compliance
Humidity Test 10 Cycles (-10°C ~ +65°C, 95% RH) MIL-STD-202E106D
Salt Spray Test 35°C, 5% concentration, 48 hr. MIL-STD-202E101D
Thermal Shock Test 5 Cycles of -55°C --> +25°C --> +85°C --> +25°C MIL-STD-202E107D
Humidity Test (Regulated Temperature) 40°C, 95% RH, 96 hr. MIL-STD-202E103D
High Temperature Life Test 85°C, 1,000 hr., rated current x 110% rated current MIL-STD-202E108D
H2S Gas Concentration 3±1 PPM, 40°C, 70 ~ 85% RH, 96 hr. JEIDA-25-1974 (Except for Solder Plug)

Basic Information

Connector type IEEE Connector manufacturer Misumi Processing method Pressure Welding
Cable shape Round Hood EMI Protection Plastic CN1 Male
Cable Rated Voltage(V) 30 Shield 2 Layer Cable Standard (UL / CSA) UL
Cable Color Black Twisted pair Included AWG 28
Cable Type SB Connector Anchoring Method One-touch

Additional Products in this Category

Complementary Products

Tech Support