(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.

All Categories

Categories

Applications

Brands

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products
Order/Quote

Part Number Checker

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 p.m. 11/23/2024 to 5:00 p.m. (CST) 11/24/2024. We apologize for the inconvenience.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.

    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Plastic Plates - PEEK, Holes Optional

Plastic Plates - PEEK, Holes Optional

MISUMI

MISUMI

If finish-machined, these plate become more convenient.

  • inCAD Components

PDFP.2019-3108

Part Number

Configured Part Number is shown.

■Standard Type
PEEK Plates:Related Image

■Pre-Drilled Type
PEEK Plates:Related Image
・Materials
Type[ M ]GradeColorOperating Ambient Temperature
PKAStandardAsh Brown-50~250°C
PKAHSlidingBlack
PKCAElectrical ConductivityBlackAmbient Temp. ~ 250°C
[ ! ]The material is not filled with glass fiber.
[ M ] Material: PEEK

Specifications

■Standard Type
Part Number-A-B-T
Circular SawingPKA-300-200-5
Guaranteed Perpendicularity of Circular SawingPKANTQ-200.5-100.5-10
4-Side Milling etc.PKA4FN-150.5-100.3-15
6-Surface Milling etc.PKA6FMM-100.3-90.5-10.5
Upper-Lower Surface Milling etc.PKA2FQ-80-50-5

■Pre-drilled Type
Part Number-A-B-T-F-G-Screw Nominal Dia.-L
PKA2H
PKCA2H		-
-		50
150		-
-		25
120		-
-		8
10		-
-		F34
F80		-
-		G10
G60		-
-		N4
M8
-
L8
■Standard Type
Part NumberDimension Range by MaterialABT
TypeFinish SelectionT Dimension ToleranceA, B Dimension Tolerance
PKA
PKAH
PKCA		Standard
Sliding
Conductive		Circular Sawing1 mm IncrementSelection
—Not AvailableNot AvailablePKA20–50020–4001235810
20–25020–150   162025
PKAH20–30020–2005810   
PKCA  10   
20–25020–150   1620 
Guaranteed Perpendicularity of Circular Sawing (NT)0.1 mm IncrementSelection
NTNot Available
Q
N
M		T5, 8, 10
0+0.3
±0.2
-0.3–0		T16, 20
0+0.4
±0.3
-0.4–0		T25
0+0.5
±0.4
-0.5–0		PKA20–30020–2005810   
20–25020–150   162025
PKAH20–30020–2005810   
PKCA  10   
20–25020–150   1620 
4-Side Milling etc. (4F)0.1 mm IncrementSelection
4FNot AvailableQ 0+0.2
N ±0.1
M -0.2–0		PKA10–30010–2005810   
10–25010–150   162025
PKAH10–30010–2005810   
PKCA  10   
10–25010–150   1620 
6-Surface Milling etc. (6F)0.1 mm Increment0.1 mm Increment
6FQ 0+0.2
N ±0.1
NM -0.2–0		Q 0+0.2
N ±0.1
M -0.2–0		PKA10–30010–2005–9
10–25010–1509.1–24
PKAH10–30010–2005–9
PKCA10–30010–2009.1–10
10–25010–15010.1–19
Upper-Lower Surface Milling etc.1 mm Increment0.1 mm Increment
2FQ 0+0.2
N ±0.1
NM -0.2–0		Not AvailablePKA20–25020–1505–24
PKAH5–9
PKCA9.1–19
• Dimension Tolerance of A and B
A, BA, B Dimension Tolerance
Unit: mm
~99±0.5
100~250±0.75
251~±1.0

• T Dimension Tolerance, Rate of Camber and Torsion
TT Dimension ToleranceRates of Camber and Torsion
PKAPKAHPKCAper 1,000mm
1+0.1~+0.5---
2, 3±0.3---
5, 8, 100~+1.10~+1.10~+1.11.2% or Less
16, 200~+1.7-0~+1.70.8% or Less
25--

Precision Guarantee
FinishWidth ParallelismPerpendicularity of Reference Plane
per 100mm
Guaranteed Perpendicularity of Circular Saw Cuts (NT)0.10.1
4-Side Milling etc. (4F)
6-Surface Milling etc. (6F)
[ ! ]Reference plane stickers are attached to 4-side milled plates.
■Pre-drilled Type
Part NumberABT Dimension Range by MaterialTFG
TypeT Dimension ToleranceNo. of Holes
PKA
PKAH
PKCA		Standard
Sliding
Conductive		Circular Sawing1 mm Increment Selection0.5 mm Increment
Not Available2H
(Horizontal)
2HL
(Vertical)
4H
6H		20–30020–200PKA5810   6–291.5
(2H, 4H)
4.5–295.5
(2HL)
6–145.5
(6H)		4.5–195.5
(2H)
6–191.5
(2HL, 4H, 6H)
PKAH
PKCA  10   
20–25020–150PKA   1620256–241.5
(2H, 4H)
4.5–245.5
(2HL)
6–120.5
(6H)		4.5–145.5
(2H)
6–141.5
(2HL, 4H, 6H)
PKCA   1620 
Upper-lower Surface Milling etc.1 mm Increment 0.1 mm Increment0.5 mm Increment
2FQ 0+0.2
2FN ±0.1
2FM -0.2–0		2H
(Horizontal)
2HL
(Vertical)
4H
6H		20–25020–150PKA5–246–241.5
(2H, 4H)
4.5–245.5
(2HL)
6–120.5
(6H)		4.5–145.5
(2H)
6–141.5
(2HL, 4H, 6H)
PKAH5–9
PKCA9.1–19
 
T DimensionPre-drilled Hole Nominal Dia.
Through HoleCounterbore HoleThreaded Insert
NZML
5~73
4
5
6
8
10		-34    (Threaded Insert Length)
Select from
Table 1
8, 9345  34568 
10~15 456 3456810
16~25 45683456810
[ ! ]Dimension F Specification Range: For 2H and 4H, d(d1)+2.5≤F≤A-d(d1)-5; for 2HL, d(d1)/2+2.5≤F≤A-d(d1)/2-2.5;
for 6H, d(d1)+2.5≤F≤(A-d(d1)-5)/2.
[ ! ]Dimension G Specification Range: For 2H, d(d1)/2+2.5≤G≤B-d(d1)/2-2.5; for 2HL, 4H and 6H, d(d1)+2.5≤G≤B-d(d1)-5.
(d for through hole and threaded insert, d1 for counterbore)
[ ! ]For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).
• Dimension Tolerance of A and B
A, BA, B Dimension Tolerance
Unit: mm
~99±0.5
100~250±0.75
251~±1.0

• T Dimension Tolerance, Rate of Camber and Torsion
TT Dimension ToleranceRates of Camber and Torsion
PKAPKAHPKCAper 1,000mm
5, 8, 100~+1.10~+1.10~+1.11.2% or Less
16, 200~+1.7-0~+1.70.8% or Less
25--

Alterations

PEEK Plates:Related Image
PEEK Plates:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
45
60
  1. 1
Part Number
PKA2FM2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FM2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FM2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2FN2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FN2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FN2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2FQ2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FQ2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FQ2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2H-[20-300/1]-[20-200/1]-[5,​8,​10,​16,​20,​25]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2H-[20-300/1]-[20-200/1]-[5,​8,​10,​16,​20,​25]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2H-[20-300/1]-[20-200/1]-[5,​8,​10,​16,​20,​25]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKAH2H-[20-300/1]-[20-200/1]-[5,​8,​10]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKAH2H-[20-300/1]-[20-200/1]-[5,​8,​10]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKAH2H-[20-300/1]-[20-200/1]-[5,​8,​10]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-Z[3,​4,​5,​6]
PKCA2H-[20-300/1]-[20-200/1]-[10,​16,​20]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKCA2H-[20-300/1]-[20-200/1]-[10,​16,​20]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKCA2H-[20-300/1]-[20-200/1]-[10,​16,​20]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-Z[3,​4,​5,​6,​8]
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSGrade Color Hole Machining Finishing Method T Dimension Tolerance AB Dimension Tolerance A
(mm) 		B
(mm) 		Counterbored Hole Nominal Dia. [Z] F
(mm) 		G
(mm) 		T
(mm) 		Threaded Insert Nominal Dia. [M] Through Hole Nominal Dia. [N]
1 Piece(s)

10 Days or more

10StandardGray Brown2HUpper-lower Surface MilledN(±0.1)-20 ～ 25020 ～ 150-6 ～ 241.54.5 ～ 145.55 ～ 243 ～ 10-
1 Piece(s)

10 Days or more

10StandardGray Brown2HUpper-lower Surface MilledN(±0.1)-20 ～ 25020 ～ 150-6 ～ 241.54.5 ～ 145.55 ～ 24-3 ～ 10
1 Piece(s)

10 Days or more

10StandardGray Brown2HUpper-lower Surface MilledN(±0.1)-20 ～ 25020 ～ 1503 ～ 106 ～ 241.54.5 ～ 145.55 ～ 24--
1 Piece(s)

10 Days or more

10StandardGray Brown2HUpper-lower Surface MilledM(0/-0.2)-20 ～ 25020 ～ 150-6 ～ 241.54.5 ～ 145.55 ～ 243 ～ 10-
1 Piece(s)

10 Days or more

10StandardGray Brown2HUpper-lower Surface MilledM(0/-0.2)-20 ～ 25020 ～ 150-6 ～ 241.54.5 ～ 145.55 ～ 24-3 ～ 10
1 Piece(s)

10 Days or more

10StandardGray Brown2HUpper-lower Surface MilledM(0/-0.2)-20 ～ 25020 ～ 1503 ～ 106 ～ 241.54.5 ～ 145.55 ～ 24--
1 Piece(s)

10 Days or more

10StandardGray Brown2HUpper-lower Surface MilledQ(+0.2/0)-20 ～ 25020 ～ 150-6 ～ 241.54.5 ～ 145.55 ～ 243 ～ 10-
1 Piece(s)

10 Days or more

10StandardGray Brown2HUpper-lower Surface MilledQ(+0.2/0)-20 ～ 25020 ～ 150-6 ～ 241.54.5 ～ 145.55 ～ 24-3 ～ 10
1 Piece(s)

10 Days or more

10StandardGray Brown2HUpper-lower Surface MilledQ(+0.2/0)-20 ～ 25020 ～ 1503 ～ 106 ～ 241.54.5 ～ 145.55 ～ 24--
1 Piece(s)

10 Days or more

10StandardGray Brown2HCircular Sawing--20 ～ 30020 ～ 200-6 ～ 291.54.5 ～ 195.55 ～ 253 ～ 10-
1 Piece(s)

10 Days or more

10StandardGray Brown2HCircular Sawing--20 ～ 30020 ～ 200-6 ～ 291.54.5 ～ 195.55 ～ 25-3 ～ 10
1 Piece(s)

10 Days or more

10StandardGray Brown2HCircular Sawing--20 ～ 30020 ～ 2003 ～ 106 ～ 291.54.5 ～ 195.55 ～ 25--
1 Piece(s)

10 Days or more

10SlidingBlack2HCircular Sawing--20 ～ 30020 ～ 200-6 ～ 291.54.5 ～ 195.55 ～ 103 ～ 10-
1 Piece(s)

10 Days or more

10SlidingBlack2HCircular Sawing--20 ～ 30020 ～ 200-6 ～ 291.54.5 ～ 195.55 ～ 10-3 ～ 10
1 Piece(s)

10 Days or more

10SlidingBlack2HCircular Sawing--20 ～ 30020 ～ 2003 ～ 66 ～ 291.54.5 ～ 195.55 ～ 10--
1 Piece(s)

10 Days or more

10ConductiveBlack2HCircular Sawing--20 ～ 30020 ～ 200-6 ～ 291.54.5 ～ 195.510 ～ 203 ～ 10-
1 Piece(s)

10 Days or more

10ConductiveBlack2HCircular Sawing--20 ～ 30020 ～ 200-6 ～ 291.54.5 ～ 195.510 ～ 20-3 ～ 10
1 Piece(s)

10 Days or more

10ConductiveBlack2HCircular Sawing--20 ～ 30020 ～ 2003 ～ 86 ～ 291.54.5 ～ 195.510 ～ 20--

Loading...

  1. 1

More Information

[ ! ]Properties >>P.953
 

Basic Information

Material PEEK Material PEEK

Configure

Clear All

18 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Grade

    • Standard
    • Conductive
    • Sliding

    Clear

  • Color

    • Black
    • Gray Brown

    Clear

  • Finishing Method

    • 4-Side Milled
    • 6-surface Milled
    • Circular Sawing
    • Guaranteed Perpendicularity of Circular Sawing
    • Upper-lower Surface Milled

    Clear

  • T Dimension Tolerance

    • M(0/-0.2)
    • N(±0.1)
    • Q(+0.2/0)

    Clear

  • AB Dimension Tolerance

    • M(0/-0.2)
    • N(±0.1)
    • Q(+0.2/0)

    Clear

  • A(mm)

     [20-300/1mm Unit(s)]

    Clear

  • B(mm)

     [20-200/1mm Unit(s)]

    Clear

  • Counterbored Hole Nominal Dia. [Z]

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10

    Clear

  • F(mm)

     [6-291.5/0.5mm Unit(s)]

    Clear

  • G(mm)

     [4.5-195.5/0.5mm Unit(s)]

    Clear

  • T(mm)

    • 1
    • 2
    • 3
    • 5
    • 8
    • 10
    • 16
    • 20
    • 25

     [5-24/0.1mm Unit(s)]

    Clear

  • Threaded Insert Nominal Dia. [M]

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10

    Clear

  • Through Hole Nominal Dia. [N]

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10

    Clear

  • type

    • PKA
    • PKA#H
    • PKA2F#
    • PKA2F##H
    • PKA4F#
    • PKA6F##
    • PKAH
    • PKAH#H
    • PKAH2F#
    • PKAH2F##H
    • PKAH4F#
    • PKAH6F##
    • PKAHNT#
    • PKANT#
    • PKCA
    • PKCA#H
    • PKCA2F#
    • PKCA2F##H
    • PKCA4F#
    • PKCA6F##
    • PKCANT#

    Clear

  • Hole Machining

    • No Drilling Alteration
    • 2H
    • 2HL
    • 4H
    • 6H

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 6 Days or Less
    • 10 Days or Less

    Clear

Specify Alterations

Additional Products in this Category

Complementary Products

Tech Support

Technical Support
Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.
Technical Inquiry

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)

Contact Information
Contact Us

Inquiry Format

Go to Mobile site

Copyright © MISUMI Corporation All Rights Reserved.