(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Plastic Plates - Polyacetal, Holes Optional

Plastic Plates - Polyacetal, Holes Optional

If finish-machined, these plate become more convenient.

  • inCAD Components

(i)Caution

  • Following a change in material standards, the 6-mm plate thickness (T dimension) of the PACA type has an updated T dimension tolerance (+0 mm or more).Orders have been suspended due to the possibility of it becoming the same standard as the 9-mm T dimension as a result of the change.If a T dimension of 6 mm is required, select PACA2F, the upper-lower surface finished product as the recommended alternative.The PACA type's 6-mm T dimension will have its standards integrated with the 9-mm T dimension going forward.
  • Please check the content on our website as the PDF does not contain the most up-to-date information.
Polyacetal Plates:Related Image
・Materials
[ M ] Material: Polyacetal
Type[ M ]GradeColorOperating Ambient Temperature
PAAStandardWhite-45~95°C
PABABlack
PACAElectric ConductivityOcherAmbient Temperature: ~ 80°C

Specifications

■Pre-drilled Type
Part Number-A-B-T-F-G-Screw Nominal Dia.-L
PABA4H
PABA4H
-
-
400
500
-
-
325
300
-
-
15
10
-
-
F300
F300
-
-
G200
G200
-
-
Z6
M5

-

L7.5
■Standard Type
Part Number-A-B-T
PAA
PAANTQ
PAA4FN
PAA6FMM
PAA2FQ
-
-
-
-
-
300
200.5
150.5
100.3
80
-
-
-
-
-
200
100.5
100.3
90.5
50
-
-
-
-
-
40
10
15
10.5
5
• Circular Sawing
• Guaranteed Perpendicularity of Circular Saw Cuts
• 4-side Milling
• 6-surface Milling
• Upper-lower Surface Milling
Dimension Tolerance of A and B
TA, BA, B Dimension Tolerance
Unit: mm
5~30~99±0.5
100~250±0.75
251~±1.0
40~60~3000~+5
TT Dimension ToleranceRates of Camber and Torsion
per 1,000mm
5~12+0.2~+1.51.0% or Less
15~30+0.3~+2.50.5% or Less
35~500~+3.0
60~70+0.5~+3.5
80~100+0.5~+5.0

T Dimension Tolerance, Rate of Camber and Torsion
Precision Guarantee
FinishWidth ParallelismPerpendicularity of Reference Plane
per 100mm
Guaranteed Perpendicularity of Circular Saw Cuts (NT)0.10.1
4-side Milling (4F)
6-surface Milling (6F)
[ ! ]Reference plane stickers are attached to 4-side milled plates.
■Standard Type
Part NumberT Dimension Range by MaterialABT
TypeFinishT Dimension ToleranceA, B Dimension Tolerance
PAA (Standard White)
PABA (Standard Black)
PACA (Conductive Grade)
Circular Sawing1mm IncrementSelection
-Not availableNot availablePAA20~50020~4005, 6, 8, 10, 12, 15, 20, 25, 30
40~30040~30040, 50, 60
PABA20~50020~4005, 6, 8, 10, 12, 15, 20, 25, 30
PACA20~50020~4006, 9, 12, 19, 25
Guaranteed Perpendicularity of Circular Sawing (NT)0.5mm IncrementSelection
NTNot available T5, 6, 8, 9, 10T12, 15, 19, 20T25, 30PAA
PABA
20~50020~4005, 6, 8, 10, 12, 15, 20, 25, 30
Q0~+0.30~+0.40~+0.5
N±0.2±0.3±0.4
M-0.3~0-0.4~0-0.5~0PACA20~50020~4006, 9, 12, 19, 25
4-side Milling (4F)0.1mm IncrementSelection
4FNot availableQ 0~+0.2
N ±0.1
M -0.2~0
PAA
PABA
10~40010~2005, 6, 8, 10, 12, 15, 20, 25, 30
PACA10~40010~2006, 9, 12, 19, 25
6-surface Milling (6F)0.1mm Increment0.1mm Increment
6FQ 0~+0.2
N ±0.1
M -0.2~0
Q 0~+0.2
N ±0.1
M -0.2~0
PAA
PABA
10~40010~2005~29
PACA10~40010~2005~24
Upper-lower Surface Milling (2F)1mm Increment0.1mm Increment
2FQ 0~+0.2
N ±0.1
M -0.2~0
Not availablePAA
PABA
20~40020~2505~29
PACA20~40020~2505~24
[ ! ]T40, 50 and 60 may have steps on cut surfaces.
[ ! ]For T0.5, 1.0, 1.5, 2.0, see P.973.
■Pre-drilled Type
Part NumberABT Dimension Range by MaterialTFG
TypeT Dimension ToleranceNumber of Holes
PAA (Standard White)
PABA (Standard Black)
PACA (Conductive Grade)
Circular Sawing1mm Increment Selection0.5mm Increment
Not available2H (Horizontal)
2HL (Vertical)
4H
6H
20~50020~400PAA
PABA
5, 6, 8, 10, 12, 15, 20, 25, 306~491.54.5~395.5
(2H)
6~391.5
(2HL, 4H, 6H)
(2H, 4H)
4.5~395.5
(2HL)
6~245.5
PACA6, 9, 12, 19, 25(6H)
Upper-lower Surface Milling (2F)1mm Increment T Dimension Configurable: 0.1mm Increment0.5mm Increment
2FQ 0~+0.2
2FN ±0.1
2FM -0.2~0
2H (Horizontal)
2HL (Vertical)
4H
6H
20~40020~250PAA
PABA
5~296~391.54.5~245.5
(2H)
6~241.5
(2HL, 4H, 6H)
(2H, 4H)
4.5~395.5
(2HL)
6~195.5
PACA5~24(6H)
 
T DimensionPre-drilled Hole Nominal Dia.
Through HoleCounterbore HoleThreaded Insert
NZML
53
4
5
6
8
10
-34    Select from Table 1
Selectable
6, 73    3456  
8345  3456  
9 456 34568 
10, 11 456 3456810
12~14 456 3456810
15~30 45683456810
[ ! ]Dimension F Specification Range: For 2H and 4H, d(d1)+2.5≤F≤A-d(d1)-5; for 2HL, d(d1)/2+2.5≤F≤A-d(d1)/2-2.5; for 6H, d(d1)+2.5≤F≤(A-d(d1)-5)/2.
[ ! ]Dimension G Specification Range: For 2H, d(d1)/2+2.5≤G≤B-d(d1)/2-2.5; for 2HL, 4H and 6H, d(d1)+2.5≤G≤B-d(d1)-5. (d for through hole and threaded insert, d1 for counterbore)
[ ! ]For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).

Alterations

Polyacetal Plates:Related Image
Polyacetal Plates:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
PAA2HL-[20-500/1]-[20-400/1]-[5,​6,​8,​10,​12,​15,​20,​25,​30]-F[4.5-395.5/0.5]-G[6-391.5/0.5]-M[3,​4,​5,​6,​8,​10]
PAA2HL-[20-500/1]-[20-400/1]-[5,​6,​8,​10,​12,​15,​20,​25,​30]-F[4.5-395.5/0.5]-G[6-391.5/0.5]-N[3,​4,​5,​6,​8,​10]
PAA2HL-[20-500/1]-[20-400/1]-[5,​6,​8,​10,​12,​15,​20,​25,​30]-F[4.5-395.5/0.5]-G[6-391.5/0.5]-Z[3,​4,​5,​6,​8]
PABA2HL-[20-800/1]-[20-600/1]-[5,​6,​8,​10,​12,​15,​20,​25,​30]-F[4.5-395.5/0.5]-G[6-391.5/0.5]-M[3,​4,​5,​6,​8,​10]
PABA2HL-[20-800/1]-[20-600/1]-[5,​6,​8,​10,​12,​15,​20,​25,​30]-F[4.5-395.5/0.5]-G[6-391.5/0.5]-N[3,​4,​5,​6,​8,​10]
PABA2HL-[20-800/1]-[20-600/1]-[5,​6,​8,​10,​12,​15,​20,​25,​30]-F[4.5-395.5/0.5]-G[6-391.5/0.5]-Z[3,​4,​5,​6,​8]
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSColor Hole Machining Finishing Method T Dimension Tolerance AB Dimension Tolerance A
(mm)
B
(mm)
Counterbored Hole Nominal Dia. [Z] F
(mm)
G
(mm)
T
(mm)
Threaded Insert Nominal Dia. [M] Through Hole Nominal Dia. [N]
1 Piece(s)

10 Days or more

10White2HLCircular Sawing--20 ~ 50020 ~ 400-4.5 ~ 395.56 ~ 391.55 ~ 303 ~ 10-
1 Piece(s)

10 Days or more

10White2HLCircular Sawing--20 ~ 50020 ~ 400-4.5 ~ 395.56 ~ 391.55 ~ 30-3 ~ 10
1 Piece(s)

10 Days or more

10White2HLCircular Sawing--20 ~ 50020 ~ 4003 ~ 84.5 ~ 395.56 ~ 391.55 ~ 30--
1 Piece(s)

10 Days or more

10Black2HLCircular Sawing--20 ~ 80020 ~ 600-4.5 ~ 395.56 ~ 391.55 ~ 303 ~ 10-
1 Piece(s)

10 Days or more

10Black2HLCircular Sawing--20 ~ 80020 ~ 600-4.5 ~ 395.56 ~ 391.55 ~ 30-3 ~ 10
1 Piece(s)

10 Days or more

10Black2HLCircular Sawing--20 ~ 80020 ~ 6003 ~ 84.5 ~ 395.56 ~ 391.55 ~ 30--

Loading...

  1. 1

More Information

[ ! ]Properties >> P.953
[ ! ]For Plastic Blocks, see P.1024.
 

Basic Information

Material Polyacetal (POM, Duracon) Grade Standard Material Polyacetal (POM, Duracon)

Additional Products in this Category

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.