(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 p.m. 11/23/2024 to 5:00 p.m. (CST) 11/24/2024. We apologize for the inconvenience.
Plastic Screws - Hex Socket Head Cap, Knurled
- On Sale Till 15/12/2024
- Volume Discount
•Shape: Standard
•Application: Standard
•Mounting Hole Shape: Hex Socket
•Material: Resin
•Shape: Standard
- inCAD Components
Part Number
Configured Part Number is shown.
<Cautions>
• The surface colors of plastic screws may change somewhat depending on production lot and other conditions.
• Sometimes black spots may be seen on the surface, which does not affect its performance.
• The surface colors of plastic screws may change somewhat depending on production lot and other conditions.
• Sometimes black spots may be seen on the surface, which does not affect its performance.
・Materials
| Type | [ M ]Material |
| RENB | RENY (Glassfiber Reinforced Polyamide MXD6) |
| PPSB | PPS (Polyphenylenesulfide) |
| PEKB | PEEK (Polyetheretherketone) |
Specifications
| Part Number |
| PPSB3-10 |
■Plastic Hex Socket Head Cap Screws
| Part Number | M | A | E | B | Compliance with Standard | |||
| x | * Less than | |||||||
| Type | M-L | P | RENB | PPSB | PEKB | |||
| RENB | 3- 6 | 3x0.5 | 5.5 | 3 | 2.5 | ● | ● | ● |
| PPSB | 8 | 3x0.5 | 5.5 | 3 | 2.5 | ● | ● | ● |
| PEKB | 10 | 3x0.5 | 5.5 | 3 | 2.5 | ● | ● | ● |
| 12 | 3x0.5 | 5.5 | 3 | 2.5 | ● | ● | ● | |
| 15 | 3x0.5 | 5.5 | 3 | 2.5 | ● | ● | ● | |
| 20 | 3x0.5 | 5.5 | 3 | 2.5 | ● | ● | ● | |
| RENB | 4- 6 | 4x0.7 | 7 | 4 | 3 | ● | ● | ● |
| PPSB | 8 | 4x0.7 | 7 | 4 | 3 | ● | ● | ● |
| PEKB | 10 | 4x0.7 | 7 | 4 | 3 | ● | ● | ● |
| 12 | 4x0.7 | 7 | 4 | 3 | ● | ● | ● | |
| 15 | 4x0.7 | 7 | 4 | 3 | ● | ● | ● | |
| 20 | 4x0.7 | 7 | 4 | 3 | ● | ● | ● | |
| RENB | 5- 8 | 5x0.8 | 8.5 | 5 | 4 | ● | ● | ● |
| PPSB | 10 | 5x0.8 | 8.5 | 5 | 4 | ● | ● | ● |
| PEKB | 12 | 5x0.8 | 8.5 | 5 | 4 | ● | ● | ● |
| 15 | 5x0.8 | 8.5 | 5 | 4 | ● | ● | ● | |
| 20 | 5x0.8 | 8.5 | 5 | 4 | ● | ● | ● | |
| 25 | 5x0.8 | 8.5 | 5 | 4 | ● | ● | ● | |
| 30 | 5x0.8 | 8.5 | 5 | 4 | ● | ● | ● | |
| RENB | 6-10 | 6x1.0 | 10 | 6 | 5 | ● | ● | ● |
| PPSB | 12 | 6x1.0 | 10 | 6 | 5 | ● | ● | ● |
| PEKB | 15 | 6x1.0 | 10 | 6 | 5 | ● | ● | ● |
| 20 | 6x1.0 | 10 | 6 | 5 | ● | ● | ● | |
| 25 | 6x1.0 | 10 | 6 | 5 | ● | ● | ● | |
| 30 | 6x1.0 | 10 | 6 | 5 | ● | ● | ● | |
| 40 | 6x1.0 | 10 | 6 | 5 | ● | ● | ● | |
| RENB | 8-15 | 8x1.25 | 13 | 8 | 6 | ● | ● | ● |
| PPSB | 20 | 8x1.25 | 13 | 8 | 6 | ● | ● | ● |
| PEKB | 25 | 8x1.25 | 13 | 8 | 6 | ● | ● | ● |
| 30 | 8x1.25 | 13 | 8 | 6 | ● | ● | ● | |
| 40 | 8x1.25 | 13 | 8 | 6 | ● | ● | ● | |
| RENB | 10-15 | 10x1.5 | 16 | 10 | 8 | ● | - | - |
| 20 | 10x1.5 | 16 | 10 | 8 | ● | - | - | |
| 25 | 10x1.5 | 16 | 10 | 8 | ● | - | - | |
| 30 | 10x1.5 | 16 | 10 | 8 | ● | - | - | |
| 35 | 10x1.5 | 16 | 10 | 8 | ● | - | - | |
| 40 | 10x1.5 | 16 | 10 | 8 | ● | - | - | |
| RENB | 12-20 | 12x1.75 | 18 | 12 | 10 | ● | - | - |
| 25 | 12x1.75 | 18 | 12 | 10 | ● | - | - | |
| 30 | 12x1.75 | 18 | 12 | 10 | ● | - | - | |
| 35 | 12x1.75 | 18 | 12 | 10 | ● | - | - | |
| 40 | 12x1.75 | 18 | 12 | 10 | ● | - | - | |
■Mechanical Properties (Reference)
[ ! ]Shown above are reference values and not guaranteed. [ ! ]Recommended tightening torque is 50% of torsional breaking torque. Use a torque driver and torque wrench for tightening.
[ ! ]Mechanical characteristics change depending on the operating environment. Testing is recommended under the applicable conditions prior to usage.
| Tensile Breaking Load N | Torsional Breaking Torque N • m | |||||
| RENB | PPSB | PEKB | RENB | PPSB | PEKB | |
| M3 | ||||||
| M4 | ||||||
| M5 | ||||||
| M6 | ||||||
| M8 | ||||||
| M10 | - | - | - | - | ||
| M12 | - | - | - | - | ||
[ ! ]Mechanical characteristics change depending on the operating environment. Testing is recommended under the applicable conditions prior to usage.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Loading...
More Information
• RENY-Glassfiber Reinforced Polyamide MXD6
RENY is based on polyamide MXD6 and is also a crystalline engineered plastic reinforced with 50% glass fiber. It has the highest strength and elasticity among engineered plastics, and excels in both oil and heat resistance. Thus, it is used as an alternative to metal.
• PPS-Polyphenylenesulfide
PPS is a crystalline super engineered plastic. It has excellent heat resistance, and does not deteriorate in physical properties even when it is used for long durations in high temperature atmosphere. In addition, it excels in chemical resistance, mechanical characteristics, electrical properties and dimensional stability.
RENY is based on polyamide MXD6 and is also a crystalline engineered plastic reinforced with 50% glass fiber. It has the highest strength and elasticity among engineered plastics, and excels in both oil and heat resistance. Thus, it is used as an alternative to metal.
• PPS-Polyphenylenesulfide
PPS is a crystalline super engineered plastic. It has excellent heat resistance, and does not deteriorate in physical properties even when it is used for long durations in high temperature atmosphere. In addition, it excels in chemical resistance, mechanical characteristics, electrical properties and dimensional stability.
[ ! ]Characteristic Value of Plastics >>P.221
• PEEK-Polyetheretherketone
PEEK is semicrystalline super engineered plastic with the highest performance. It has the highest chemical resistance among all engineered plastics. The only generally used chemical that can dissolve PEEK is concentrated sulfuric acid. PEEK also excels in heat resistance, abrasion resistance, flame resistance and hydrolysis resistance.
PEEK is semicrystalline super engineered plastic with the highest performance. It has the highest chemical resistance among all engineered plastics. The only generally used chemical that can dissolve PEEK is concentrated sulfuric acid. PEEK also excels in heat resistance, abrasion resistance, flame resistance and hydrolysis resistance.
Basic Information
| Detailed Shape | Standard | Mounting Hole Shape | Hex Socket | Basic Shape | Standard |
|---|---|---|---|---|---|
| Material | Resin | Surface Treatment | None | Additional Shapes | Standard |
| Application | Standard |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Plastic Screws - Hex Socket Head Cap, SPE-C
- Plastic Screws - Long Stud Bolt, RENY/ZB
- Plastic Screws - Hex Socket Head Cap, PFA/CB
- Plastic Screws - Pan Head, Phillips Drive, Cross Recessed, PEEK/PH
- Plastic Screws - Hex Head, PVC/BT
- Plastic Screws - Hex Head, PTFE/BT
- Plastic Screws - Hex Head
- Plastic Screws - Slotted Hex Head, PFA
Complementary Products
-
Hex Socket Cap Screw - M4 - M10, Coarse, Configurable Length, Partially Threaded
MISUMI Days to Ship : 9 Days or more
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy