(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Bushings for Locating Pins - Straight.
- On Sale Till 15/12/2024
- Volume Discount
- Spec Change
•Shape: Straight
•Bore (Inner Dia.) Shape: Round
•Outer Dia. Tolerance: Oversized
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
■Standard
[ ! ]Tolerance of d dimension 2 ~ 6 of electroless nickel plated products is H7.
[ ! ]For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.
(See "Variance of I.D. after Press-fitting Bushings for Locating Pins" on P.1566)
■Thin Wall
[ ! ]Tolerance of d dimension 3 ~ 6 of electroless nickel plated products is H7.
[ ! ]For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.
(See "Variance of I.D. after Press-fitting Bushings for Locating Pins" on P.1566)
■Standard
| [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type | |
| p6 | m6 | |||
| O1 Tool Steel Equivalent | - | 60HRC~ | JBA | JBAM |
| O1 Tool Steel Equivalent | Electroless Nickel Plating | 60HRC~ | JBAN | JBAMN |
| 440C or 420 Stainless Steel | - | 50HRC~ | JBAC | JBAMC |
[ ! ]For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.
(See "Variance of I.D. after Press-fitting Bushings for Locating Pins" on P.1566)
■Thin Wall
| [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type | |
| p6 | m6 | |||
| 52100 Bearing Steel or O1 Tool Steel Equivalent | - | 58HRC~ | JBAUP | JBAU |
| 52100 Bearing Steel or O1 Tool Steel Equivalent | Electroless Nickel Plating | 58HRC~ | JBAUNP | JBAUN |
| 440C or 420 Stainless Steel | - | 50HRC~ | JBAUCP | JBAUC |
[ ! ]For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.
(See "Variance of I.D. after Press-fitting Bushings for Locating Pins" on P.1566)
Specifications
| Part Number | - | L |
| JBAC12 JBAUN8 | - - | 10 8 |
■Standard
[ NG ]L dimension with * is not applicable to JBAMC.
| Part Number | L Selection | Thickness (N) | R | D | D Tolerance | |||||||||||||||||
| Type | d | d Tolerance | p6 | m6 | ||||||||||||||||||
| No Surface Treatment | Electroless Nickel Plating | |||||||||||||||||||||
| (p6) JBA JBAN JBAC (m6) JBAM JBAMN JBAMC | 2 | G6 | +0.008 +0.002 | H7 | +0.010 0 | 5 | 6 | 7 | 8 | 10 | 12 | 1.5 | 0.8 | 5 | +0.020 +0.012 | +0.012 +0.004 | ||||||
| 3 | G6 | +0.008 +0.002 | H7 | +0.010 0 | 2 | 0.8 | 7 | +0.024 +0.015 | +0.015 +0.006 | |||||||||||||
| 4 | G6 | +0.012 +0.004 | H7 | +0.012 0 | 5 | 6 | 7 | 8 | 10 | 12 | 15 | *16 | 20 | 2 | 1 | 8 | +0.024 +0.015 | +0.015 +0.006 | ||||
| 5 | G6 | +0.012 +0.004 | H7 | +0.012 0 | 5 | 6 | 7 | 8 | 10 | 12 | 15 | 16 | 20 | 2.5 | 1 | 10 | +0.024 +0.015 | +0.015 +0.006 | ||||
| 6 | G6 | +0.012 +0.004 | H7 | +0.012 0 | 5 | 6 | 7 | 8 | 10 | 12 | 15 | 16 | 20 | 25 | 2 | 1 | 10 | +0.024 +0.015 | +0.015 +0.006 | |||
| 8 | G6 | +0.014 +0.005 | G6 | +0.014 +0.005 | 2 | 2 | 12 | +0.029 +0.018 | +0.018 +0.007 | |||||||||||||
| 10 | G6 | +0.014 +0.005 | G6 | +0.014 +0.005 | 6 | 7 | 8 | 10 | 12 | 15 | 16 | 20 | 25 | 30 | 2.5 | 2 | 15 | +0.029 +0.018 | +0.018 +0.007 | |||
| 12 | G6 | +0.017 +0.006 | G6 | +0.017 +0.006 | 8 | 10 | 12 | 15 | 16 | 20 | 25 | 30 | 3 | 2 | 18 | +0.029 +0.018 | +0.018 +0.007 | |||||
| 13 | G6 | +0.017 +0.006 | G6 | +0.017 +0.006 | 10 | 12 | *15 | 16 | 20 | *25 | 30 | 4.5 | 2 | 22 | +0.035 +0.022 | +0.021 +0.008 | ||||||
| 15 | G6 | +0.017 +0.006 | G6 | +0.017 +0.006 | 12 | 15 | 16 | 20 | *25 | 30 | 5 | 2 | 25 | +0.035 +0.022 | +0.021 +0.008 | |||||||
| 16 | G6 | +0.017 +0.006 | G6 | +0.017 +0.006 | 12 | 15 | 16 | 20 | 25 | 30 | 5 | 2 | 26 | +0.035 +0.022 | +0.021 +0.008 | |||||||
| 20 | G6 | +0.020 +0.007 | G6 | +0.020 +0.007 | 5 | 3 | 30 | +0.035 +0.022 | +0.021 +0.008 | |||||||||||||
| 25 | G6 | +0.020 +0.007 | G6 | +0.020 +0.007 | 16 | 20 | 25 | 30 | *35 | 5 | 3 | 35 | +0.042 +0.026 | +0.025 +0.009 | ||||||||
■Thin Wall
[ NG ]L dimension with * is not applicable to JBAUN.
| Part Number | L Selection | Thickness (N) | R | D | D Tolerance | ||||||||||||||
| Type | d | d Tolerance | p6 | m6 | |||||||||||||||
| No Surface Treatment | Electroless Nickel Plating | ||||||||||||||||||
| (p6) JBAUP JBAUNP JBAUCP (m6) JBAU JBAUN JBAUC | 3 | G6 | +0.008 +0.002 | H7 | +0.010 0 | 5 | 6 | 8 | 10 | 12 | 1 | 0.5 | 5 | +0.020 +0.012 | +0.012 +0.004 | ||||
| 4 | G6 | +0.012 +0.004 | H7 | +0.012 0 | 5 | 6 | 8 | 10 | 12 | 15 | 16 | 1 | 0.5 | 6 | +0.020 +0.012 | +0.012 +0.004 | |||
| 5 | G6 | +0.012 +0.004 | H7 | +0.012 0 | 5 | 6 | 8 | 10 | 12 | 15 | 16 | 20 | 1 | 0.5 | 7 | +0.024 +0.015 | +0.015 +0.006 | ||
| 6 | G6 | +0.012 +0.004 | H7 | +0.012 0 | 1 | 0.5 | 8 | +0.024 +0.015 | +0.015 +0.006 | ||||||||||
| 8 | G6 | +0.014 +0.005 | G6 | +0.014 +0.005 | 6 | 8 | 10 | 12 | 15 | 16 | 20 | 1 | 0.5 | 10 | +0.024 +0.015 | +0.015 +0.006 | |||
| 10 | G6 | +0.014 +0.005 | G6 | +0.014 +0.005 | 1.5 | 0.5 | 13 | +0.029 +0.018 | +0.018 +0.007 | ||||||||||
| 12 | G6 | +0.017 +0.006 | G6 | +0.017 +0.006 | 8 | 10 | 12 | 15 | 16 | 20 | 1.5 | 0.5 | 15 | +0.029 +0.018 | +0.018 +0.007 | ||||
| 13 | G6 | +0.017 +0.006 | G6 | +0.017 +0.006 | 10 | 12 | *15 | 16 | 20 | 2 | 1 | 17 | +0.029 +0.018 | +0.018 +0.007 | |||||
| 15 | G6 | +0.017 +0.006 | G6 | +0.017 +0.006 | 10 | 12 | 15 | 16 | 20 | 2 | 1 | 19 | +0.035 +0.022 | +0.021 +0.008 | |||||
| 16 | G6 | +0.017 +0.006 | G6 | +0.017 +0.006 | 10 | 12 | 15 | 16 | 20 | 25 | 2.5 | 2 | 21 | +0.035 +0.022 | +0.021 +0.008 | ||||
| 20 | G6 | +0.020 +0.007 | G6 | +0.020 +0.007 | 12 | 15 | 16 | 20 | 25 | 3 | 2 | 26 | +0.035 +0.022 | +0.021 +0.008 | |||||
| 25 | G6 | +0.020 +0.007 | G6 | +0.020 +0.007 | 20 | 25 | 3 | 2 | 31 | +0.042 +0.026 | +0.025 +0.009 | ||||||||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Loading...
Example
Basic Information
| Basic Shape | Straight | Bore (Inner Dia.) Shape | Round shape | Outer Dia. Tolerance | Oversized |
|---|---|---|---|---|---|
| Special Features | No |
Stock
-
- Stock Item Only
Specification/Dimensions
-
Inner Dia. (mm)(mm)
-
Outer Dia. (mm)(mm)
-
Material
- Steel
- Stainless Steel
- Steel
-
Surface Finish
- No
- Electroless Nickel Plating
-
I.D. d(mm)
-
D Tolerance
- m6
- p6
-
Length L(mm)
-
type
- JBA
- JBAC
- JBAM
- JBAMC
- JBAMN
- JBAN
- JBAU
- JBAUC
- JBAUCP
- JBAUN
- JBAUNP
- JBAUP
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 6 Days or Less
- 8 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Bushings for Locating Pins - Notched.
- Bushings for Locating Pins - Slotted.
- Bushings for Locating Pins - Square Flange with 4 mounting holes.
- Bushings for Locating Pins - Straight, Inch Dimensions.
- Bushings for Locating Pins - Flanged, Configurable, Inch Dimensions.
- Bushings for Locating Pins - Compact Flange, Inch Dimensions.
- Bushings for Locating Pins - Flanged, Alloy Steel.
- Locating Bushings - Straight.
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy