(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.

All Categories

Categories

Applications

Brands

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products
Order/Quote

Part Number Checker

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 p.m. 11/23/2024 to 5:00 p.m. (CST) 11/24/2024. We apologize for the inconvenience.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.

    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Precision Linear Shafts - Set screw groove, tapped or threaded end. (Part Numbers)

Precision Linear Shafts - Set screw groove, tapped or threaded end.
  • Spec Change

MISUMI

MISUMI

Case hardened stainless steel with low temp black chrome, 304 SS with hard chrome and 1045 with hard chrome added as new. [3/31/2023]
One End Tapped or Threaded Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalent, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.
[Diameter range] 6mm - 30mm
[Length range]25mm - 1500mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.

  • inCAD Components

PDFP.2019-214

Part Number

Configured Part Number is shown.

Precision Linear Shafts - Set Screw Grooved:Related Image
[ ! ]Annealing could reduce hardness at set screw grooved shaft end machined areas (effective thread length + approx. 10mm).
[ ! ]Circularity, Straightness, Perpendicularity, Concentricity, Changes in Hardness >> P.111
[ ! ]Features of Low Temp. Black Chrome Plating >> P.128
・Materials
Type[ M ]Material[ H ]Hardness[ S ]Surface Treatment
Solid, Both Ends GroovedSolid, One End GroovedOne End TappedOne End ThreadedOne End Threaded with O.D. same as Shaft O.D.
SFJQSFJSSFTSSFNSSFQS52100 Bearing Steel EquivalentEffective Hardened Depth of Induction Hardened >>P.112
52100 Bearing Steel Equivalent 58HRC~
SUS440C(13Cr) Stainless Steel Equivalent 56HRC~		-
SSFJQSSFJSSSFTSSSFNSSSFQSSUS440C(13Cr) Stainless Steel Equivalent
PSFJQPSFJSPSFTSPSFNSPSFQS52100 Bearing Steel EquivalentHard Chrome Plating
Plating Hardness: HV750 ~
Plating Thickness: 5µ or More
PSSFJQPSSFJSPSSFTSPSSFNSPSSFQSSUS440C(13Cr) Stainless Steel Equivalent

Specifications

Part Number-L-M-F-B-P-V-K-G-Q
SFJQ16-100        -V10-K5-G10-Q5
SSFTS20-500-M10          -G10-Q7
PSFNS8-650  -F10-B8-P4    -G20-Q4
Part NumberL
1mm Increment		Slot DimensionD Tol.C
TypeDV, G (0.1mm Increment)K, QD1g6
Solid, Both Ends Grooved
SFJQ
SSFJQ
PSFJQ
PSSFJQ		620~6005~184   5-0.004
-0.012		0.5 or Less
820~8005~2445  7-0.005
-0.014		0.5 or Less
1020~8005~3045  9-0.005
-0.014		0.5 or Less
1220~10005~36 5  10-0.006
-0.017		0.5 or Less
1325~10005~39 5  11-0.006
-0.017		0.5 or Less
1525~10005~45 56 13-0.006
-0.017		0.5 or Less
1630~12005~48 56 14-0.006
-0.017		0.5 or Less
1830~12005~54 56 16-0.006
-0.017		0.5 or Less
2030~12006~60  6718-0.007
-0.020		1.0 or Less
2535~12006~75  6723-0.007
-0.020		1.0 or Less
3035~15006~90   728-0.007
-0.020		1.0 or Less

Part NumberL
1mm Increment		Slot DimensionD Tol.C
TypeDG (0.1mm Increment)QD1g6
Solid, One End Grooved
SFJS
SSFJS
PSFJS
PSSFJS		620~6005~184   5-0.004
-0.012		0.5 or Less
820~8005~2445  7-0.005
-0.014		0.5 or Less
1020~8005~3045  9-0.005
-0.014		0.5 or Less
1220~10005~36 5  10-0.006
-0.017		0.5 or Less
1325~10005~39 5  11-0.006
-0.017		0.5 or Less
1525~10005~45 56 13-0.006
-0.017		0.5 or Less
1630~12005~48 56 14-0.006
-0.017		0.5 or Less
1830~12005~54 56 16-0.006
-0.017		0.5 or Less
2030~12006~60  6718-0.007
-0.020		1.0 or Less
2535~12006~75  6723-0.007
-0.020		1.0 or Less
3035~15006~90   728-0.007
-0.020		1.0 or Less

Part NumberL
1mm Increment		One End TappedSlot DimensionD Tol.C
TypeDM (Coarse Thread)G (0.1mm Increment)QD1g6
One End Tapped Type
SFTS
SSFTS
PSFTS
PSSFTS		620~6003         5~184   5-0.004
-0.012		0.5 or Less
820~800345       5~2445  7-0.005
-0.014		0.5 or Less
1020~8003456      5~3045  9-0.005
-0.014		0.5 or Less
1220~1000 4568     5~36 5  10-0.006
-0.017		0.5 or Less
1325~1000 4568     5~39 5  11-0.006
-0.017		0.5 or Less
1525~1000 456810    5~45 56 13-0.006
-0.017		0.5 or Less
1630~1200 456810    5~48 56 14-0.006
-0.017		0.5 or Less
1830~1200 45681012   5~54 56 16-0.006
-0.017		0.5 or Less
2030~1200 45681012   6~60  6718-0.007
-0.020		1.0 or Less
2535~1200 4568101216  6~75  6723-0.007
-0.020		1.0 or Less
3035~1500   6810121620246~90   728-0.007
-0.020		1.0 or Less
[ ! ]V+K/2+1≤L/2 or G+Q/2+1≤L/2 is required. [ ! ]For One End Tapped Type, G≤L-Mx2-Qx2 is required.
[ ! ]When Mx2.5+4≥L, tap pilot holes may go through.

Part Number1mm IncrementSelectionSlot DimensionD Tol.(Y)Max.RC
TypeDLFBPG (1mm Increment)Q (Selection)D1g6
Threaded Type
SFNS
SSFNS
PSFNS
PSSFNS		625~5982≤F≤Px5(When P≤6)
B≤F-2

(When P=8, 10)
B≤F-3

(When P≥12)
B≤F-5

[ ! ]B≥Pitchx3		3456       5~184   5-0.004
-0.012		6000.3 or Less0.5 or Less
825~79834568      5~2445  7-0.005
-0.014		8000.3 or Less0.5 or Less
1025~798 456810     5~3045  9-0.005
-0.014		8000.3 or Less0.5 or Less
1225~998  5681012    5~36 5  11-0.006
-0.017		10000.3 or Less0.5 or Less
1325~998  5681012    5~39 5  11-0.006
-0.017		10000.3 or Less0.5 or Less
1525~998  5681012    5~45 56 13-0.006
-0.017		10000.3 or Less0.5 or Less
1625~1198  568101216   5~48 56 14-0.006
-0.017		12000.3 or Less0.5 or Less
1825~1198  568101216   5~54 56 16-0.006
-0.017		12000.3 or Less0.5 or Less
2025~1198   6810121620  6~60  6718-0.007
-0.020		12000.3 or Less1.0 or Less
2525~1198    81012162024 6~75  6723-0.007
-0.020		12000.3 or Less1.0 or Less
3025~1498    81012162024306~90   728-0.007
-0.020		15000.3 or Less1.0 or Less

Part Number1mm IncrementSlot DimensionD Tol.(Y)Max.C
TypeDLBG (1mm Increment)Q (Selection)D1g6
One End Threaded with O.D. same as Shaft O.D.
SFQS
SSFQS
PSFQS
PSSFQS		625~598Pitchx3≤B≤Mx5


[ ! ]For One End Threaded with O.D. same as Shaft O.D., L dimensions have priority, thus the effective thread length will be B-(Pitchx2).		5~184   5-0.004
-0.012		6000.5 or Less
825~7985~2445  7-0.005
-0.014		8000.5 or Less
1025~7985~3045  9-0.005
-0.014		8000.5 or Less
1225~9985~36 5  11-0.006
-0.017		10000.5 or Less
1625~11985~48 56 14-0.006
-0.017		12000.5 or Less
2025~11986~60  6718-0.007
-0.020		12001.0 or Less
3025~14986~90   728-0.007
-0.020		15001.0 or Less
[ ! ]V+K/2+1≤L/2 or G+Q/2+1≤L/2 is required.

Coarse Thread Dimension
MPitch
30.5
40.7
50.8
61.0
81.25
101.5
121.75
162.0
202.5
243.0
303.5

Alterations

Precision Linear Shafts - Set Screw Grooved:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
60
90
  1. << Prev
  2. 1
  3. 2
  4. 3
  5. Next >>
Part Number
PSSFQS30-[35-1500/1]-B[2-145/1]-G[6-90/1]-Q7
PSSFTS6-[20-600/1]-M3-G[5-18/1]-Q4
PSSFTS8-[20-800/1]-M[3,​4,​5]-G[5-24/1]-Q[4,​5]
PSSFTS10-[20-800/1]-M[3,​4,​5,​6]-G[5-30/1]-Q[4,​5]
PSSFTS12-[20-1000/1]-M[4,​5,​6,​8]-G[5-36/1]-Q5
PSSFTS13-[25-1000/1]-M[4,​5,​6,​8]-G[5-39/1]-Q5
PSSFTS15-[25-1000/1]-M[4,​5,​6,​8,​10]-G[5-45/1]-Q[5,​6]
PSSFTS16-[30-1200/1]-M[4,​5,​6,​8,​10]-G[5-48/1]-Q[5,​6]
PSSFTS18-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-G[5-54/1]-Q[5,​6]
PSSFTS20-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-G[6-60/1]-Q[6,​7]
PSSFTS25-[30-1200/1]-M[4,​5,​6,​8,​10,​12,​16]-G[6-75/1]-Q[6,​7]
PSSFTS30-[35-1500/1]-M[6,​8,​10,​12,​16,​20,​24]-G[6-90/1]-Q7
SFJQ6-[20-600/1]-V[5-18/1]-K4-G[5-18/1]-Q4
SFJQ8-[20-800/1]-V[5-24/1]-K[4,​5]-G[5-24/1]-Q[4,​5]
SFJQ10-[20-800/1]-V[5-30/1]-K[4,​5]-G[5-30/1]-Q[4,​5]
SFJQ12-[20-1000/1]-V[5-36/1]-K5-G[5-36/1]-Q5
SFJQ13-[25-1000/1]-V[5-39/1]-K5-G[5-39/1]-Q5
SFJQ15-[25-1000/1]-V[5-45/1]-K[5,​6]-G[5-45/1]-Q[5,​6]
SFJQ16-[30-1200/1]-V[5-48/1]-K[5,​6]-G[5-48/1]-Q[5,​6]
SFJQ18-[30-1200/1]-V[5-54/1]-K[5,​6]-G[5-54/1]-Q[5,​6]
SFJQ20-[30-1200/1]-V[6-60/1]-K[6,​7]-G[6-60/1]-Q[6,​7]
SFJQ25-[30-1200/1]-V[6-75/1]-K[6,​7]-G[6-75/1]-Q[6,​7]
SFJQ30-[35-1500/1]-V[6-90/1]-K7-G[6-90/1]-Q7
SFJS6-[20-600/1]-G[5-18/1]-Q4
SFJS8-[20-800/1]-G[5-24/1]-Q[4,​5]
SFJS10-[20-800/1]-G[5-30/1]-Q[4,​5]
SFJS12-[20-1000/1]-G[5-36/1]-Q5
SFJS13-[25-1000/1]-G[5-39/1]-Q5
SFJS15-[25-1000/1]-G[5-45/1]-Q[5,​6]
SFJS16-[30-1200/1]-G[5-48/1]-Q[5,​6]
SFJS18-[30-1200/1]-G[5-54/1]-Q[5,​6]
SFJS20-[30-1200/1]-G[6-60/1]-Q[6,​7]
SFJS25-[30-1200/1]-G[6-75/1]-Q[6,​7]
SFJS30-[35-1500/1]-G[6-90/1]-Q7
SFNS6-[20-600/1]-F[2-30/1]-B[2-28/1]-P[3,​4,​5,​6]-G[5-18/1]-Q4
SFNS8-[20-800/1]-F[2-40/1]-B[2-37/1]-P[3,​4,​5,​6,​8]-G[5-24/1]-Q[4,​5]
SFNS10-[20-800/1]-F[2-50/1]-B[2-47/1]-P[4,​5,​6,​8,​10]-G[5-30/1]-Q[4,​5]
SFNS12-[20-1000/1]-F[2-60/1]-B[2-55/1]-P[5,​6,​8,​10,​12]-G[5-36/1]-Q5
SFNS13-[25-1000/1]-F[2-60/1]-B[2-55/1]-P[5,​6,​8,​10,​12]-G[5-39/1]-Q5
SFNS15-[25-1000/1]-F[2-60/1]-B[2-55/1]-P[5,​6,​8,​10,​12]-G[5-45/1]-Q[5,​6]
SFNS16-[30-1200/1]-F[2-80/1]-B[2-75/1]-P[5,​6,​8,​10,​12,​16]-G[5-48/1]-Q[5,​6]
SFNS18-[30-1200/1]-F[2-80/1]-B[2-75/1]-P[5,​6,​8,​10,​12,​16]-G[5-54/1]-Q[5,​6]
SFNS20-[30-1200/1]-F[2-100/1]-B[2-95/1]-P[6,​8,​10,​12,​16,​20]-G[6-60/1]-Q[6,​7]
SFNS25-[30-1200/1]-F[2-120/1]-B[2-115/1]-P[8,​10,​12,​16,​20,​24]-G[6-75/1]-Q[6,​7]
SFNS30-[35-1500/1]-F[2-150/1]-B[2-145/1]-P[8,​10,​12,​16,​20,​24,​30]-G[6-90/1]-Q7
SFQS6-[20-600/1]-B[2-28/1]-G[5-18/1]-Q4
SFQS8-[20-800/1]-B[2-37/1]-G[5-24/1]-Q[4,​5]
SFQS10-[20-800/1]-B[2-47/1]-G[5-30/1]-Q[4,​5]
SFQS12-[20-1000/1]-B[2-55/1]-G[5-36/1]-Q5
SFQS16-[30-1200/1]-B[2-75/1]-G[5-48/1]-Q[5,​6]
SFQS20-[30-1200/1]-B[2-95/1]-G[6-60/1]-Q[6,​7]
SFQS30-[35-1500/1]-B[2-145/1]-G[6-90/1]-Q7
SFTS6-[20-600/1]-M3-G[5-18/1]-Q4
SFTS8-[20-800/1]-M[3,​4,​5]-G[5-24/1]-Q[4,​5]
SFTS10-[20-800/1]-M[3,​4,​5,​6]-G[5-30/1]-Q[4,​5]
SFTS12-[20-1000/1]-M[4,​5,​6,​8]-G[5-36/1]-Q5
SFTS13-[25-1000/1]-M[4,​5,​6,​8]-G[5-39/1]-Q5
SFTS15-[25-1000/1]-M[4,​5,​6,​8,​10]-G[5-45/1]-Q[5,​6]
SFTS16-[30-1200/1]-M[4,​5,​6,​8,​10]-G[5-48/1]-Q[5,​6]
SFTS18-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-G[5-54/1]-Q[5,​6]
SFTS20-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-G[6-60/1]-Q[6,​7]
SFTS25-[30-1200/1]-M[4,​5,​6,​8,​10,​12,​16]-G[6-75/1]-Q[6,​7]
SFTS30-[35-1500/1]-M[6,​8,​10,​12,​16,​20,​24]-G[6-90/1]-Q7
SSFJQ6-[20-600/1]-V[5-18/1]-K4-G[5-18/1]-Q4
SSFJQ8-[20-800/1]-V[5-24/1]-K[4,​5]-G[5-24/1]-Q[4,​5]
SSFJQ10-[20-800/1]-V[5-30/1]-K[4,​5]-G[5-30/1]-Q[4,​5]
SSFJQ12-[20-1000/1]-V[5-36/1]-K5-G[5-36/1]-Q5
SSFJQ13-[25-1000/1]-V[5-39/1]-K5-G[5-39/1]-Q5
SSFJQ15-[25-1000/1]-V[5-45/1]-K[5,​6]-G[5-45/1]-Q[5,​6]
SSFJQ16-[30-1200/1]-V[5-48/1]-K[5,​6]-G[5-48/1]-Q[5,​6]
SSFJQ18-[30-1200/1]-V[5-54/1]-K[5,​6]-G[5-54/1]-Q[5,​6]
SSFJQ20-[30-1200/1]-V[6-60/1]-K[6,​7]-G[6-60/1]-Q[6,​7]
SSFJQ25-[30-1200/1]-V[6-75/1]-K[6,​7]-G[6-75/1]-Q[6,​7]
SSFJQ30-[35-1500/1]-V[6-90/1]-K7-G[6-90/1]-Q7
SSFJS6-[20-600/1]-G[5-18/1]-Q4
SSFJS8-[20-800/1]-G[5-24/1]-Q[4,​5]
SSFJS10-[20-800/1]-G[5-30/1]-Q[4,​5]
SSFJS12-[20-1000/1]-G[5-36/1]-Q5
SSFJS13-[25-1000/1]-G[5-39/1]-Q5
SSFJS15-[25-1000/1]-G[5-45/1]-Q[5,​6]
SSFJS16-[30-1200/1]-G[5-48/1]-Q[5,​6]
SSFJS18-[30-1200/1]-G[5-54/1]-Q[5,​6]
SSFJS20-[30-1200/1]-G[6-60/1]-Q[6,​7]
SSFJS25-[30-1200/1]-G[6-75/1]-Q[6,​7]
SSFJS30-[35-1500/1]-G[6-90/1]-Q7
SSFNS6-[20-600/1]-F[2-30/1]-B[2-28/1]-P[3,​4,​5,​6]-G[5-18/1]-Q4
SSFNS8-[20-800/1]-F[2-40/1]-B[2-37/1]-P[3,​4,​5,​6,​8]-G[5-24/1]-Q[4,​5]
SSFNS10-[20-800/1]-F[2-50/1]-B[2-47/1]-P[4,​5,​6,​8,​10]-G[5-30/1]-Q[4,​5]
SSFNS12-[20-1000/1]-F[2-60/1]-B[2-55/1]-P[5,​6,​8,​10,​12]-G[5-36/1]-Q5
SSFNS13-[25-1000/1]-F[2-60/1]-B[2-55/1]-P[5,​6,​8,​10,​12]-G[5-39/1]-Q5
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSBasic Shape Shaft Dia. D
(mm) 		End Shape (Left) Material Surface Finish Length L
(mm) 		End Section Type B
(mm) 		Coarse Thread [M]
(mm) 		F
(mm) 		G
(mm) 		K
(mm) 		Thread (Coarse) [P]
(mm) 		Q
(mm) 		V
(mm)
1 Piece(s)

10 Days or more

10Straight30Threaded[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentHard Chrome35 ～ 1500One End Threaded Shafts with O.D. same as Shaft O.D.2 ～ 145--6 ～ 90--7-
1 Piece(s)

10 Days or more

10Straight6Tapped[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentHard Chrome20 ～ 600One End Tapped-3-5 ～ 18--4-
1 Piece(s)

10 Days or more

10Straight8Tapped[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentHard Chrome20 ～ 800One End Tapped-3 ～ 5-5 ～ 24--4 ～ 5-
1 Piece(s)

10 Days or more

10Straight10Tapped[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentHard Chrome20 ～ 800One End Tapped-3 ～ 6-5 ～ 30--4 ～ 5-
1 Piece(s)

10 Days or more

10Straight12Tapped[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentHard Chrome20 ～ 1000One End Tapped-4 ～ 8-5 ～ 36--5-
1 Piece(s)

10 Days or more

10Straight13Tapped[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentHard Chrome25 ～ 1000One End Tapped-4 ～ 8-5 ～ 39--5-
1 Piece(s)

10 Days or more

10Straight15Tapped[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentHard Chrome25 ～ 1000One End Tapped-4 ～ 10-5 ～ 45--5 ～ 6-
1 Piece(s)

10 Days or more

10Straight16Tapped[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentHard Chrome30 ～ 1200One End Tapped-4 ～ 10-5 ～ 48--5 ～ 6-
1 Piece(s)

10 Days or more

10Straight18Tapped[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentHard Chrome30 ～ 1200One End Tapped-4 ～ 12-5 ～ 54--5 ～ 6-
1 Piece(s)

10 Days or more

10Straight20Tapped[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentHard Chrome30 ～ 1200One End Tapped-4 ～ 12-6 ～ 60--6 ～ 7-
1 Piece(s)

10 Days or more

10Straight25Tapped[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentHard Chrome30 ～ 1200One End Tapped-4 ～ 16-6 ～ 75--6 ～ 7-
1 Piece(s)

10 Days or more

10Straight30Tapped[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentHard Chrome35 ～ 1500One End Tapped-6 ～ 24-6 ～ 90--7-
1 Piece(s)

10 Days or more

10Straight6Set Screw Groove[Steel] 52100 Bearing Steel EquivalentNone20 ～ 600Solid, Both Ends Grooved---5 ～ 184-45 ～ 18
1 Piece(s)

10 Days or more

10Straight8Set Screw Groove[Steel] 52100 Bearing Steel EquivalentNone20 ～ 800Solid, Both Ends Grooved---5 ～ 244 ～ 5-4 ～ 55 ～ 24
1 Piece(s)

10 Days or more

10Straight10Set Screw Groove[Steel] 52100 Bearing Steel EquivalentNone20 ～ 800Solid, Both Ends Grooved---5 ～ 304 ～ 5-4 ～ 55 ～ 30
1 Piece(s)

10 Days or more

10Straight12Set Screw Groove[Steel] 52100 Bearing Steel EquivalentNone20 ～ 1000Solid, Both Ends Grooved---5 ～ 365-55 ～ 36
1 Piece(s)

10 Days or more

10Straight13Set Screw Groove[Steel] 52100 Bearing Steel EquivalentNone25 ～ 1000Solid, Both Ends Grooved---5 ～ 395-55 ～ 39
1 Piece(s)

10 Days or more

10Straight15Set Screw Groove[Steel] 52100 Bearing Steel EquivalentNone25 ～ 1000Solid, Both Ends Grooved---5 ～ 455 ～ 6-5 ～ 65 ～ 45
1 Piece(s)

10 Days or more

10Straight16Set Screw Groove[Steel] 52100 Bearing Steel EquivalentNone30 ～ 1200Solid, Both Ends Grooved---5 ～ 485 ～ 6-5 ～ 65 ～ 48
1 Piece(s)

10 Days or more

10Straight18Set Screw Groove[Steel] 52100 Bearing Steel EquivalentNone30 ～ 1200Solid, Both Ends Grooved---5 ～ 545 ～ 6-5 ～ 65 ～ 54
1 Piece(s)

10 Days or more

10Straight20Set Screw Groove[Steel] 52100 Bearing Steel EquivalentNone30 ～ 1200Solid, Both Ends Grooved---6 ～ 606 ～ 7-6 ～ 76 ～ 60
1 Piece(s)

10 Days or more

10Straight25Set Screw Groove[Steel] 52100 Bearing Steel EquivalentNone30 ～ 1200Solid, Both Ends Grooved---6 ～ 756 ～ 7-6 ～ 76 ～ 75
1 Piece(s)

10 Days or more

10Straight30Set Screw Groove[Steel] 52100 Bearing Steel EquivalentNone35 ～ 1500Solid, Both Ends Grooved---6 ～ 907-76 ～ 90
1 Piece(s)

10 Days or more

10Straight6No Machining[Steel] 52100 Bearing Steel EquivalentNone20 ～ 600Solid, One End Grooved---5 ～ 18--4-
1 Piece(s)

10 Days or more

10Straight8No Machining[Steel] 52100 Bearing Steel EquivalentNone20 ～ 800Solid, One End Grooved---5 ～ 24--4 ～ 5-
1 Piece(s)

10 Days or more

10Straight10No Machining[Steel] 52100 Bearing Steel EquivalentNone20 ～ 800Solid, One End Grooved---5 ～ 30--4 ～ 5-
1 Piece(s)

10 Days or more

10Straight12No Machining[Steel] 52100 Bearing Steel EquivalentNone20 ～ 1000Solid, One End Grooved---5 ～ 36--5-
1 Piece(s)

10 Days or more

10Straight13No Machining[Steel] 52100 Bearing Steel EquivalentNone25 ～ 1000Solid, One End Grooved---5 ～ 39--5-
1 Piece(s)

10 Days or more

10Straight15No Machining[Steel] 52100 Bearing Steel EquivalentNone25 ～ 1000Solid, One End Grooved---5 ～ 45--5 ～ 6-
1 Piece(s)

10 Days or more

10Straight16No Machining[Steel] 52100 Bearing Steel EquivalentNone30 ～ 1200Solid, One End Grooved---5 ～ 48--5 ～ 6-
1 Piece(s)

10 Days or more

10Straight18No Machining[Steel] 52100 Bearing Steel EquivalentNone30 ～ 1200Solid, One End Grooved---5 ～ 54--5 ～ 6-
1 Piece(s)

10 Days or more

10Straight20No Machining[Steel] 52100 Bearing Steel EquivalentNone30 ～ 1200Solid, One End Grooved---6 ～ 60--6 ～ 7-
1 Piece(s)

10 Days or more

10Straight25No Machining[Steel] 52100 Bearing Steel EquivalentNone30 ～ 1200Solid, One End Grooved---6 ～ 75--6 ～ 7-
1 Piece(s)

10 Days or more

10Straight30No Machining[Steel] 52100 Bearing Steel EquivalentNone35 ～ 1500Solid, One End Grooved---6 ～ 90--7-
1 Piece(s)

10 Days or more

10One End Stepped6Threaded[Steel] 52100 Bearing Steel EquivalentNone20 ～ 600One End Threaded2 ～ 28-2 ～ 305 ～ 18-3 ～ 64-
1 Piece(s)

10 Days or more

10One End Stepped8Threaded[Steel] 52100 Bearing Steel EquivalentNone20 ～ 800One End Threaded2 ～ 37-2 ～ 405 ～ 24-3 ～ 84 ～ 5-
1 Piece(s)

10 Days or more

10One End Stepped10Threaded[Steel] 52100 Bearing Steel EquivalentNone20 ～ 800One End Threaded2 ～ 47-2 ～ 505 ～ 30-4 ～ 104 ～ 5-
1 Piece(s)

10 Days or more

10One End Stepped12Threaded[Steel] 52100 Bearing Steel EquivalentNone20 ～ 1000One End Threaded2 ～ 55-2 ～ 605 ～ 36-5 ～ 125-
1 Piece(s)

10 Days or more

10One End Stepped13Threaded[Steel] 52100 Bearing Steel EquivalentNone25 ～ 1000One End Threaded2 ～ 55-2 ～ 605 ～ 39-5 ～ 125-
1 Piece(s)

10 Days or more

10One End Stepped15Threaded[Steel] 52100 Bearing Steel EquivalentNone25 ～ 1000One End Threaded2 ～ 55-2 ～ 605 ～ 45-5 ～ 125 ～ 6-
1 Piece(s)

10 Days or more

10One End Stepped16Threaded[Steel] 52100 Bearing Steel EquivalentNone30 ～ 1200One End Threaded2 ～ 75-2 ～ 805 ～ 48-5 ～ 165 ～ 6-
1 Piece(s)

10 Days or more

10One End Stepped18Threaded[Steel] 52100 Bearing Steel EquivalentNone30 ～ 1200One End Threaded2 ～ 75-2 ～ 805 ～ 54-5 ～ 165 ～ 6-
1 Piece(s)

10 Days or more

10One End Stepped20Threaded[Steel] 52100 Bearing Steel EquivalentNone30 ～ 1200One End Threaded2 ～ 95-2 ～ 1006 ～ 60-6 ～ 206 ～ 7-
1 Piece(s)

10 Days or more

10One End Stepped25Threaded[Steel] 52100 Bearing Steel EquivalentNone30 ～ 1200One End Threaded2 ～ 115-2 ～ 1206 ～ 75-8 ～ 246 ～ 7-
1 Piece(s)

10 Days or more

10One End Stepped30Threaded[Steel] 52100 Bearing Steel EquivalentNone35 ～ 1500One End Threaded2 ～ 145-2 ～ 1506 ～ 90-8 ～ 307-
1 Piece(s)

10 Days or more

10Straight6Threaded[Steel] 52100 Bearing Steel EquivalentNone20 ～ 600One End Threaded Shafts with O.D. same as Shaft O.D.2 ～ 28--5 ～ 18--4-
1 Piece(s)

10 Days or more

10Straight8Threaded[Steel] 52100 Bearing Steel EquivalentNone20 ～ 800One End Threaded Shafts with O.D. same as Shaft O.D.2 ～ 37--5 ～ 24--4 ～ 5-
1 Piece(s)

10 Days or more

10Straight10Threaded[Steel] 52100 Bearing Steel EquivalentNone20 ～ 800One End Threaded Shafts with O.D. same as Shaft O.D.2 ～ 47--5 ～ 30--4 ～ 5-
1 Piece(s)

10 Days or more

10Straight12Threaded[Steel] 52100 Bearing Steel EquivalentNone20 ～ 1000One End Threaded Shafts with O.D. same as Shaft O.D.2 ～ 55--5 ～ 36--5-
1 Piece(s)

10 Days or more

10Straight16Threaded[Steel] 52100 Bearing Steel EquivalentNone30 ～ 1200One End Threaded Shafts with O.D. same as Shaft O.D.2 ～ 75--5 ～ 48--5 ～ 6-
1 Piece(s)

10 Days or more

10Straight20Threaded[Steel] 52100 Bearing Steel EquivalentNone30 ～ 1200One End Threaded Shafts with O.D. same as Shaft O.D.2 ～ 95--6 ～ 60--6 ～ 7-
1 Piece(s)

10 Days or more

10Straight30Threaded[Steel] 52100 Bearing Steel EquivalentNone35 ～ 1500One End Threaded Shafts with O.D. same as Shaft O.D.2 ～ 145--6 ～ 90--7-
1 Piece(s)

10 Days or more

10Straight6Tapped[Steel] 52100 Bearing Steel EquivalentNone20 ～ 600One End Tapped-3-5 ～ 18--4-
1 Piece(s)

10 Days or more

10Straight8Tapped[Steel] 52100 Bearing Steel EquivalentNone20 ～ 800One End Tapped-3 ～ 5-5 ～ 24--4 ～ 5-
1 Piece(s)

10 Days or more

10Straight10Tapped[Steel] 52100 Bearing Steel EquivalentNone20 ～ 800One End Tapped-3 ～ 6-5 ～ 30--4 ～ 5-
1 Piece(s)

10 Days or more

10Straight12Tapped[Steel] 52100 Bearing Steel EquivalentNone20 ～ 1000One End Tapped-4 ～ 8-5 ～ 36--5-
1 Piece(s)

10 Days or more

10Straight13Tapped[Steel] 52100 Bearing Steel EquivalentNone25 ～ 1000One End Tapped-4 ～ 8-5 ～ 39--5-
1 Piece(s)

10 Days or more

10Straight15Tapped[Steel] 52100 Bearing Steel EquivalentNone25 ～ 1000One End Tapped-4 ～ 10-5 ～ 45--5 ～ 6-
1 Piece(s)

10 Days or more

10Straight16Tapped[Steel] 52100 Bearing Steel EquivalentNone30 ～ 1200One End Tapped-4 ～ 10-5 ～ 48--5 ～ 6-
1 Piece(s)

10 Days or more

10Straight18Tapped[Steel] 52100 Bearing Steel EquivalentNone30 ～ 1200One End Tapped-4 ～ 12-5 ～ 54--5 ～ 6-
1 Piece(s)

10 Days or more

10Straight20Tapped[Steel] 52100 Bearing Steel EquivalentNone30 ～ 1200One End Tapped-4 ～ 12-6 ～ 60--6 ～ 7-
1 Piece(s)

10 Days or more

10Straight25Tapped[Steel] 52100 Bearing Steel EquivalentNone30 ～ 1200One End Tapped-4 ～ 16-6 ～ 75--6 ～ 7-
1 Piece(s)

10 Days or more

10Straight30Tapped[Steel] 52100 Bearing Steel EquivalentNone35 ～ 1500One End Tapped-6 ～ 24-6 ～ 90--7-
1 Piece(s)

10 Days or more

10Straight6Set Screw Groove[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone20 ～ 600Solid, Both Ends Grooved---5 ～ 184-45 ～ 18
1 Piece(s)

10 Days or more

10Straight8Set Screw Groove[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone20 ～ 800Solid, Both Ends Grooved---5 ～ 244 ～ 5-4 ～ 55 ～ 24
1 Piece(s)

10 Days or more

10Straight10Set Screw Groove[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone20 ～ 800Solid, Both Ends Grooved---5 ～ 304 ～ 5-4 ～ 55 ～ 30
1 Piece(s)

10 Days or more

10Straight12Set Screw Groove[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone20 ～ 1000Solid, Both Ends Grooved---5 ～ 365-55 ～ 36
1 Piece(s)

10 Days or more

10Straight13Set Screw Groove[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone25 ～ 1000Solid, Both Ends Grooved---5 ～ 395-55 ～ 39
1 Piece(s)

10 Days or more

10Straight15Set Screw Groove[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone25 ～ 1000Solid, Both Ends Grooved---5 ～ 455 ～ 6-5 ～ 65 ～ 45
1 Piece(s)

10 Days or more

10Straight16Set Screw Groove[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone30 ～ 1200Solid, Both Ends Grooved---5 ～ 485 ～ 6-5 ～ 65 ～ 48
1 Piece(s)

10 Days or more

10Straight18Set Screw Groove[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone30 ～ 1200Solid, Both Ends Grooved---5 ～ 545 ～ 6-5 ～ 65 ～ 54
1 Piece(s)

10 Days or more

10Straight20Set Screw Groove[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone30 ～ 1200Solid, Both Ends Grooved---6 ～ 606 ～ 7-6 ～ 76 ～ 60
1 Piece(s)

10 Days or more

10Straight25Set Screw Groove[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone30 ～ 1200Solid, Both Ends Grooved---6 ～ 756 ～ 7-6 ～ 76 ～ 75
1 Piece(s)

10 Days or more

10Straight30Set Screw Groove[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone35 ～ 1500Solid, Both Ends Grooved---6 ～ 907-76 ～ 90
1 Piece(s)

10 Days or more

10Straight6No Machining[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone20 ～ 600Solid, One End Grooved---5 ～ 18--4-
1 Piece(s)

10 Days or more

10Straight8No Machining[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone20 ～ 800Solid, One End Grooved---5 ～ 24--4 ～ 5-
1 Piece(s)

10 Days or more

10Straight10No Machining[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone20 ～ 800Solid, One End Grooved---5 ～ 30--4 ～ 5-
1 Piece(s)

10 Days or more

10Straight12No Machining[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone20 ～ 1000Solid, One End Grooved---5 ～ 36--5-
1 Piece(s)

10 Days or more

10Straight13No Machining[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone25 ～ 1000Solid, One End Grooved---5 ～ 39--5-
1 Piece(s)

10 Days or more

10Straight15No Machining[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone25 ～ 1000Solid, One End Grooved---5 ～ 45--5 ～ 6-
1 Piece(s)

10 Days or more

10Straight16No Machining[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone30 ～ 1200Solid, One End Grooved---5 ～ 48--5 ～ 6-
1 Piece(s)

10 Days or more

10Straight18No Machining[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone30 ～ 1200Solid, One End Grooved---5 ～ 54--5 ～ 6-
1 Piece(s)

10 Days or more

10Straight20No Machining[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone30 ～ 1200Solid, One End Grooved---6 ～ 60--6 ～ 7-
1 Piece(s)

10 Days or more

10Straight25No Machining[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone30 ～ 1200Solid, One End Grooved---6 ～ 75--6 ～ 7-
1 Piece(s)

10 Days or more

10Straight30No Machining[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone35 ～ 1500Solid, One End Grooved---6 ～ 90--7-
1 Piece(s)

10 Days or more

10One End Stepped6Threaded[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone20 ～ 600One End Threaded2 ～ 28-2 ～ 305 ～ 18-3 ～ 64-
1 Piece(s)

10 Days or more

10One End Stepped8Threaded[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone20 ～ 800One End Threaded2 ～ 37-2 ～ 405 ～ 24-3 ～ 84 ～ 5-
1 Piece(s)

10 Days or more

10One End Stepped10Threaded[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone20 ～ 800One End Threaded2 ～ 47-2 ～ 505 ～ 30-4 ～ 104 ～ 5-
1 Piece(s)

10 Days or more

10One End Stepped12Threaded[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone20 ～ 1000One End Threaded2 ～ 55-2 ～ 605 ～ 36-5 ～ 125-
1 Piece(s)

10 Days or more

10One End Stepped13Threaded[Stainless Steel] SUS440C(13Cr) Stainless Steel EquivalentNone25 ～ 1000One End Threaded2 ～ 55-2 ～ 605 ～ 39-5 ～ 125-

Loading...

  1. << Prev
  2. 1
  3. 2
  4. 3
  5. Next >>
 

Basic Information

End Shape (Right) Set Screw Groove Shaft End Perpendicularity Perpendicularity (0.2) Shaft Fits Tolerance g6

Configure

Clear All

204 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Basic Shape

    • Straight
    • One End Stepped

    Clear

  • Shaft Dia. D(mm)

    • 6
    • 8
    • 10
    • 12
    • 13
    • 15
    • 16
    • 18
    • 20
    • 25
    • 30

    Clear

  • End Shape (Left)

    • No Machining
    • Tapped
    • Threaded
    • Set Screw Groove

    Clear

  • Material

    • Steel
      • 52100 Bearing Steel Equivalent
    • Stainless Steel
      • SUS440C(13Cr) Stainless Steel Equivalent

    Clear

  • Surface Finish

    • None
    • Hard Chrome

    Clear

  • Length L(mm)

     [20-1500/1mm Unit(s)]

    Clear

  • End Section Type

    • One End Tapped
    • One End Threaded
    • One End Threaded Shafts with O.D. same as Shaft O.D.
    • Solid, Both Ends Grooved
    • Solid, One End Grooved

    Clear

  • B(mm)

     [2-145/1mm Unit(s)]

    Clear

  • Coarse Thread [M](mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20
    • 24

    Clear

  • F(mm)

     [2-150/1mm Unit(s)]

    Clear

  • G(mm)

     [5-90/1mm Unit(s)]

    Clear

  • K(mm)

    • 4
    • 5
    • 6
    • 7

    Clear

  • Thread (Coarse) [P](mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20
    • 24
    • 30

    Clear

  • Q(mm)

    • 4
    • 5
    • 6
    • 7

    Clear

  • V(mm)

     [5-90/1mm Unit(s)]

    Clear

  • type

    • PSFJQ
    • PSFJS
    • PSFNS
    • PSFQS
    • PSFTS
    • PSSFJQ
    • PSSFJS
    • PSSFNS
    • PSSFQS
    • PSSFTS
    • SFJQ
    • SFJS
    • SFNS
    • SFQS
    • SFTS
    • SSFJQ
    • SSFJS
    • SSFNS
    • SSFQS
    • SSFTS

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 10 Days or Less

    Clear

Specify Alterations

Additional Products in this Category

Complementary Products

Tech Support

Technical Support
Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.
Technical Inquiry

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)

Contact Information
Contact Us

Inquiry Format

Go to Mobile site

Copyright © MISUMI Corporation All Rights Reserved.