(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Timing Belts - Long, Polyurethane, Configurable Number of Teeth
Click this image to zoom it.
Move the mouse over the image to zoom
The belt length is selectable as desired. This timing belts are suitable for a long span synchronous conveyance.
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
[ ! ]Operating Temp.: -20°C~70°C
| Type | Type | [ M ]Material | ||
| ①Main Body | ②Core Wire | ③Cloth | ||
| LTBJ | Standard | Polyurethane (for Joint Process) |
T5, T10, L , H, S5M, S8M: Aramid Core Wire AT5, AT10: Steel Cord |
- |
| LTBN | Backside Cloth Lined | Nylon Cloth | ||
| LTBR | Both Sides Cloth Lined | |||
Specifications
| Part Number | - | Number of Teeth | ||||
| Type | Belt Type | Belt Nominal Width | ||||
| LTBJ LTBR |
- - |
AT5 H |
150 200 |
- - |
800 300 |
|
[ ! ]For the belt design data >>Click here, for material properties Click here
■Comparison of Friction Coefficient (Reference Value)
* Figures in the table are examples of actual measurement, not standard values.
■Comparison of Friction Coefficient (Reference Value)
| Belt Type Matching Material |
Tooth Surface | Back Surface | ||
| Cloth Lined | Standard | Cloth Lined | Standard | |
| Steel | 0.34 | 0.65 | 0.29 | 0.75 |
| Stainless Steel | 0.22 | 0.68 | 0.17 | 0.69 |
| Aluminum | 0.19 | 0.42 | 0.15 | 0.50 |
| UHMW | 0.18 | 0.31 | 0.17 | 0.32 |
| fluoropolymer | 0.12 | 0.21 | 0.12 | 0.28 |
| Belt Type | Pitch | 2θ(°) | H | h | i | L | Unit Mass g/m (Width: 10mm) | ||
| Standard | Backside Cloth Lined | Both Sides Cloth Lined | |||||||
| L | 9.525 | 40° | 3.6 | 1.91 | 1.69 | 3.25 | 29.1 | 28.8 | - |
| H | 12.7 | 40° | 4.36 | 2.29 | 2.07 | 4.4 | 36.2 | 33.8 | - |
| T5 | 5 | 40° | 2.2 | 1.2 | 1.0 | 1.8 | 19.0 | - | 20.0 |
| T10 | 10 | 40° | 4.5 | 2.5 | 2.0 | 3.5 | 37.7 | 34.5 | 32.5 |
| AT5 | 5 | 50° | 2.7 | 1.2 | 1.5 | 2.5 | 32.0 | - | - |
| AT10 | 10 | 50° | 4.5 | 2.5 | 2.0 | 5.0 | 58.6 | - | - |
| Belt Type | Pitch | Ra | Lr | H | h | i | Unit Mass g/m (Width: 10mm) |
| Standard | |||||||
| S5M | 5 | 3.25 | 3.25 | 3.31 | 1.81 | 1.5 | 29.0 |
| S8M | 8 | 5.2 | 5.2 | 5.3 | 2.95 | 2.35 | 45.2 |
| Part Number | Number of Teeth | Belt Width (mm) | Allowable Tension (N) | ||
| Type | Belt Type | Belt Nominal Width | |||
| LTBJ (Standard) LTBN (Backside Cloth Lined) LTBR (Both Sides Cloth Lined) |
L | 050 | 74~1049 | 12.7 | 92 |
| 075 | 19.1 | 138 | |||
| 100 | 25.4 | 184 | |||
| 150 | 38.1 | 276 | |||
| H | 075 | 56~787 | 19.1 | 163 | |
| 100 | 25.4 | 216 | |||
| 150 | 38.1 | 324 | |||
| 200 | 50.8 | 432 | |||
| S5M | 100 | 140~2000 | 10 | 60 | |
| 150 | 15 | 90 | |||
| 250 | 25 | 150 | |||
| S8M | 150 | 88~1250 | 15 | 117 | |
| 250 | 25 | 196 | |||
| 300 | 30 | 235 | |||
| 400 | 40 | 313 | |||
| T5 | 100 | 140~2000 | 10 | 58 | |
| 150 | 15 | 87 | |||
| 200 | 20 | 116 | |||
| 250 | 25 | 145 | |||
| T10 | 150 | 70~1000 | 15 | 180 | |
| 200 | 20 | 240 | |||
| 250 | 25 | 300 | |||
| 300 | 30 | 360 | |||
| 400 | 40 | 481 | |||
| 500 | 50 | 601 | |||
| AT5 | 100 | 140~2000 | 10 | 74 | |
| 150 | 15 | 110 | |||
| AT10 | 150 | 70~1000 | 15 | 234 | |
| 200 | 20 | 312 | |||
| 250 | 25 | 391 | |||
[ ! ]For orders larger than indicated quantity, please request a quotation.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| LTBJ-AT10150-[70-1000/1] |
| LTBJ-AT10200-[70-1000/1] |
| LTBJ-AT10250-[70-1000/1] |
| LTBJ-AT5100-[140-2000/1] |
| LTBJ-AT5150-[140-2000/1] |
Loading...
Basic Information
| Belt Shape | Closed End (Weld Connection) | Belt Material | Polyurethane |
|---|
Specification/Dimensions
-
Properties
- Standard
- Backside Cloth Lined
- Both Sides Cloth Lined
-
Belt Type
- MXL/T80
- H
- T5
- T10
- AT5
- AT10
- S5M
- S8M
-
Belt width(mm)
-
Belt-shaped type
- Trapezoid Tooth Profile Circular Type
- Trapezoid Tooth Profile Metric Type
- Trapezoid Tooth Profile AT Type
- Round tooth profile super torque
-
Belt Nominal Width
-
Number of Teeth
-
type
- LTBJ
- LTBN
- LTBR
-
Core Wire Material
- Aramid
- Steel Cord
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 12 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked questions (FAQ)
- 質問: What is the difference between LTBN and TBN belts?
- 回答: LTBN and TBN will work on the same pulley granted they are the same type (H type, MXL type, etc.), however an LTBN belt carries products on its outer surface, which can be more expensive, and TBN is designed for torque transmission.
Additional Products in this Category
- Timing Belts - T5 and T10 Profile, with Attachments
- Conveyor Industrial Brushes - Roll Brush
- Roller Carriers - Press Fit or Urethane Lined Rollers, 9 or 10 mm Width
- Conveyor Bearings - Engineering plastic, R type (round).
- Conveyor Bearings - Engineering plastic, V groove, threaded bore.
- Ball Roller Units - Type Z.
- Ball Roller - Multiple configurations, model K-142.
- Ball Roller - Shim type ring.
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy